Daniel Refy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel Refy has a total of 556 co-authors. Here are the top co-authors by number of shared publications:
- Sandor Zoletnik
HUN-REN Centre for Energy Research, Institute for Atomic Energy Research 1 , Budapest
16 shared publications D. Dunai
HUN-REN Centre for Energy Research, 1121 Budapest, Hungary
11 shared publications- Pavel Hacek
Institute of Plasma Physics Czech Academy of Sciences
9 shared publications S. Zoletnik
9 shared publicationsJet Contributors
8 shared publications- Jaroslav Krbec
Institute of Plasma Physics Czech Academy of Sciences
7 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Magnetic Field Compatibility Experiments of Ultrafast, Eddy Current Driven Actuators- ITER DMS Fast Shutter and ITER DMS Support Laboratory Propellant Valve Tests
Ultrafast actuators in the ITER Disruption Mitigation System must operate reliably in external magnetic fields while providing reproducible pellet launch and propellant gas suppression. This study investigates the magnetic-field compatibility of an eddy-current-driven fast propellant valve and fast shutter at the ITER Static Magnetic Field Test Facility. Magnetic-field scans and repeated-actuation tests were performed to assess performance sensitivity, repeatability and thermal effects. The valve exhibited a material-dependent reduction in expelled gas amount with increasing field strength. This reduction could be compensated by a modest increase in capacitor charging voltage, demonstrating sufficient actuation margin under the expected operating conditions. Initial valve pressure and actuator temperature were also identified as relevant factors affecting gas delivery. The shutter showed only weak magnetic-field sensitivity, maintaining reproducible millisecond closure and impact-free braking during extended operation. Neither device exhibited measurable field-related functional degradation during the campaign. These results support the use of eddy-current actuators in the ITER magnetic environment and provide experimental design inputs for the ITER DMS Propellant Valve Prototype, while demonstrating the suitability of the fast shutter concept for fusion applications.
- 29 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMagnetic Field Compatibility Experiments of Ultrafast, Eddy Current Driven Actuators- ITER DMS Fast Shutter and ITER DMS Support Laboratory Propellant Valve Tests
Ultrafast actuators in the ITER Disruption Mitigation System must operate reliably in external magnetic fields while providing reproducible pellet launch and propellant gas suppression. This study investigates the magnetic-field compatibility of an eddy-current-driven fast propellant valve and fast shutter at the ITER Static Magnetic Field Test Facility. Magnetic-field scans and repeated-actuation tests were performed to assess performance sensitivity, repeatability and thermal effects. The valve exhibited a material-dependent reduction in expelled gas amount with increasing field strength. This reduction could be compensated by a modest increase in capacitor charging voltage, demonstrating sufficient actuation margin under the expected operating conditions. Initial valve pressure and actuator temperature were also identified as relevant factors affecting gas delivery. The shutter showed only weak magnetic-field sensitivity, maintaining reproducible millisecond closure and impact-free braking during extended operation. Neither device exhibited measurable field-related functional degradation during the campaign. These results support the use of eddy-current actuators in the ITER magnetic environment and provide experimental design inputs for the ITER DMS Propellant Valve Prototype, while demonstrating the suitability of the fast shutter concept for fusion applications.
- Open Access
- 1 September 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (9) , 095021
Impact of nitrogen injection on L–H transitions in JET with a Be/W wall
L–H transition experiments in JET with a Be/W wall (JET-ILW), with N 2 injection into the divertor region, have revealed that the H-mode power threshold, P L–H , increases with N 2 injection rate in the high-density branch and modifies the density at which the power threshold is minimum, n e,min . P L–H values approaching those obtained in JET with a C wall are achieved for a sizeable increase in N concentration. At a given density in the high-density branch of P L–H , both the total loss power ( P loss ) and the power crossing the separatrix ( P sep ) at the L–H transition increase by a factor of ∼1.5 at high N 2 levels. At a given line-averaged density, while the edge density is similar in plasmas with and without N 2 injection, the edge temperature at the L–H transition is higher in pulses with high N seeding levels and a larger shear of the edge radial electric field E r is measured. At low N concentrations, little change in P L–H is observed. Qualitative agreement is reported with the impact of Z eff on L-mode edge turbulence drive (Bourdelle et al 2015 Nucl. Fusion 55 073015). The enhanced L-mode edge turbulence drive with N 2 seeding at higher Z eff implies that a higher P L–H is expected as, indeed, has been measured in experiments. It is assumed that the mean equilibrium E r × B shear is a key player in the reduction of L-mode edge turbulence, leading to the L–H transition. In this framework, the L–H transition observations in JET-Be/W + N 2 are interpreted by an increase in L-mode edge plasma turbulence with increased N concentration and the need for a larger stabilizing E r × B shear, and thus a higher P sep , to trigger the L–H transition. For future fusion reactors having scenarios with extrinsic low-Z impurity seeding for mitigation of divertor heat load our results suggest the need to predict P sep for H-mode access taking into account not only the high radiation fractions from the bulk plasma but also the impact of low- Z impurity concentration on P loss and P sep at the L–H transition.
- 1 September 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (9) , 095021
Open AccessImpact of nitrogen injection on L–H transitions in JET with a Be/W wall
L–H transition experiments in JET with a Be/W wall (JET-ILW), with N 2 injection into the divertor region, have revealed that the H-mode power threshold, P L–H , increases with N 2 injection rate in the high-density branch and modifies the density at which the power threshold is minimum, n e,min . P L–H values approaching those obtained in JET with a C wall are achieved for a sizeable increase in N concentration. At a given density in the high-density branch of P L–H , both the total loss power ( P loss ) and the power crossing the separatrix ( P sep ) at the L–H transition increase by a factor of ∼1.5 at high N 2 levels. At a given line-averaged density, while the edge density is similar in plasmas with and without N 2 injection, the edge temperature at the L–H transition is higher in pulses with high N seeding levels and a larger shear of the edge radial electric field E r is measured. At low N concentrations, little change in P L–H is observed. Qualitative agreement is reported with the impact of Z eff on L-mode edge turbulence drive (Bourdelle et al 2015 Nucl. Fusion 55 073015). The enhanced L-mode edge turbulence drive with N 2 seeding at higher Z eff implies that a higher P L–H is expected as, indeed, has been measured in experiments. It is assumed that the mean equilibrium E r × B shear is a key player in the reduction of L-mode edge turbulence, leading to the L–H transition. In this framework, the L–H transition observations in JET-Be/W + N 2 are interpreted by an increase in L-mode edge plasma turbulence with increased N concentration and the need for a larger stabilizing E r × B shear, and thus a higher P sep , to trigger the L–H transition. For future fusion reactors having scenarios with extrinsic low-Z impurity seeding for mitigation of divertor heat load our results suggest the need to predict P sep for H-mode access taking into account not only the high radiation fractions from the bulk plasma but also the impact of low- Z impurity concentration on P loss and P sep at the L–H transition.
- Open Access
- 1 August 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (8) , 085042
Diagnostics for large tokamaks: from JET to JT-60SA 1
The main scientific purpose of JT-60SA is to complement ITER in the preparation of the operation of a DEMOnstration fusion reactor, in particular investigating the conditions for a controllable high-beta steady-state regime able to optimise the fusion gain. In order to accomplish this task, a sequence of operation and machine enhancement periods in the next few years are planned to reach the target performance of the machine before a transition to a full tungsten wall. EUROfusion and Fusion for Energy are jointly contributing to the enhancement plan of JT-60SA, in particular, with regard to the present contribution, to provide JT-60SA with state-of-the-art diagnostics in support of its scientific and technical objectives. This paper reports the status of the projects being implemented in view of the next scientific campaigns or under consideration through the various stages from feasibility to detailed design.
- 1 August 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (8) , 085042
Open AccessDiagnostics for large tokamaks: from JET to JT-60SA 1
The main scientific purpose of JT-60SA is to complement ITER in the preparation of the operation of a DEMOnstration fusion reactor, in particular investigating the conditions for a controllable high-beta steady-state regime able to optimise the fusion gain. In order to accomplish this task, a sequence of operation and machine enhancement periods in the next few years are planned to reach the target performance of the machine before a transition to a full tungsten wall. EUROfusion and Fusion for Energy are jointly contributing to the enhancement plan of JT-60SA, in particular, with regard to the present contribution, to provide JT-60SA with state-of-the-art diagnostics in support of its scientific and technical objectives. This paper reports the status of the projects being implemented in view of the next scientific campaigns or under consideration through the various stages from feasibility to detailed design.
- Open Access
- 22 November 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 222
Analysis of the first plasmas of JT-60SA using the EDICAM visible video diagnostic
- 22 November 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 222
Open AccessAnalysis of the first plasmas of JT-60SA using the EDICAM visible video diagnostic
- 24 July 2025
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 82 (3) , 636-658
Atomic Beam Probe Synthetic Diagnostic in the COMPASS Tokamak and Its Application in Fusion Plasmas
- 24 July 2025
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 82 (3) , 636-658
Atomic Beam Probe Synthetic Diagnostic in the COMPASS Tokamak and Its Application in Fusion Plasmas
- Open Access
- 21 May 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 218
Validation of a new propellant valve test bed to support developments for shattered pellet injection technology
- 21 May 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 218
Open AccessValidation of a new propellant valve test bed to support developments for shattered pellet injection technology
- Open Access
- 17 April 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 216
ITER DMS fast shutter prototype testing
- 17 April 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 216
Open AccessITER DMS fast shutter prototype testing
- Open Access
- 24 December 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (1) , 015022
Operation of a lithium beam diagnostic in tritium and deuterium–tritium experiments at JET
A fast neutral lithium beam has been used at JET for more than 30 years to measure profiles of electron density in the pedestal and scrape off layer. The diagnostic was not designed for tritium operation. In this paper, we describe the modifications which were required to allow operation in tritium (T) and deuterium–tritium (D-T) fuelled pulses at JET in 2021 and 2023. Methods to allow remote startup and remote control of the beam were implemented. The vacuum pump and exhaust system had to be made tritium compatible. Radiation vulnerable electronics had to be removed from the torus hall. The observation system relied on regular in vessel mirror exchange. An in-vessel protection shield was installed close to the observation mirror to protect the mirror surface. Operation in T and D-T discharges, maintenance post tritium exposure, commissioning and the calibration of the diagnostic are discussed.
- 24 December 2024
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (1) , 015022
Open AccessOperation of a lithium beam diagnostic in tritium and deuterium–tritium experiments at JET
A fast neutral lithium beam has been used at JET for more than 30 years to measure profiles of electron density in the pedestal and scrape off layer. The diagnostic was not designed for tritium operation. In this paper, we describe the modifications which were required to allow operation in tritium (T) and deuterium–tritium (D-T) fuelled pulses at JET in 2021 and 2023. Methods to allow remote startup and remote control of the beam were implemented. The vacuum pump and exhaust system had to be made tritium compatible. Radiation vulnerable electronics had to be removed from the torus hall. The observation system relied on regular in vessel mirror exchange. An in-vessel protection shield was installed close to the observation mirror to protect the mirror surface. Operation in T and D-T discharges, maintenance post tritium exposure, commissioning and the calibration of the diagnostic are discussed.
- 6 September 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 208
Analysis of pellet propellant gas expansion in the test bench of the ITER DMS Support Laboratory
- 6 September 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 208
Analysis of pellet propellant gas expansion in the test bench of the ITER DMS Support Laboratory
- Open Access
- 7 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (9) , 096033
Production and launch studies of cryogenic pellets for the ITER disruption mitigation system
A support laboratory has been set up to study pellet production, launch and shattering of cryogenic protium, deuterium, and neon pellets for the ITER disruption mitigation system, which plans to use 28.5 × 57 mm (diameter × length) protium, neon an mixture pellets in the Shattered Pellet Injectors. Such large protium pellets have not been produced and launched before, therefore the desublimation and launch process have been studied in detail in two steps. First 19 mm diameter pellets were produced, followed by the demonstration of the final pellet size. Pellet desublimation recipes were established for all pellet types, and it was found that, under certain conditions, even the large neon pellets can be launched with a propellant gas pulse, without requiring a mechanical punch device. This is attributed to cryogenic snow formation on the surface of the pellet. Conditions for the snow formation are studied and tendencies are understood using simple calculations.
- 7 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (9) , 096033
Open AccessProduction and launch studies of cryogenic pellets for the ITER disruption mitigation system
A support laboratory has been set up to study pellet production, launch and shattering of cryogenic protium, deuterium, and neon pellets for the ITER disruption mitigation system, which plans to use 28.5 × 57 mm (diameter × length) protium, neon an mixture pellets in the Shattered Pellet Injectors. Such large protium pellets have not been produced and launched before, therefore the desublimation and launch process have been studied in detail in two steps. First 19 mm diameter pellets were produced, followed by the demonstration of the final pellet size. Pellet desublimation recipes were established for all pellet types, and it was found that, under certain conditions, even the large neon pellets can be launched with a propellant gas pulse, without requiring a mechanical punch device. This is attributed to cryogenic snow formation on the surface of the pellet. Conditions for the snow formation are studied and tendencies are understood using simple calculations.