Raghuraman N. Govardhan
Research Subjects
Research Interests
Raghuraman N. Govardhan has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Subhajit Biswas
Department of Aeronautics and Astronautics, University of Southampton, Southampton, UK
4 shared publications J. H. Arakeri
Department of Mechanical Engineering, Indian Institute of Science, Bangalore, 560012, India
3 shared publications- Anil Das
Department of Mechanical Engineering, The Pennsylvania State University, University Park, 16802, USA
2 shared publications Chandrasekhar Medipati
Indian Institute of Science
2 shared publications- Jayaprakash Narayan Murugan
School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India
2 shared publications M. Jimreeves David
Department of Mechanical Engineering, Indian Institute of Science, Bangalore, 560012, India
2 shared publications
Latest Publications
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Elliptical liquid jets in a supersonic cross-flow: Influence of J on atomization mechanism and unsteadiness
In our previous study [Medipati et al., J. Fluid Mech. 1014, A34 (2025)], a detailed experimental investigation is performed on the elliptical liquid jets in a supersonic cross-flow (M∞ = 2.5), focusing on the effect of orifice aspect ratio (AR = spanwise dimension/streamwise dimension) on the atomization mechanism for a fixed momentum flux ratio (J). In this paper, we present experimental studies that show the influence of J on the jet breakup mechanism, shock structures, and unsteady interactions for each AR. A wide range of J values (1.5–9.7) and three AR cases (0.3, 1, and 3.3) are chosen for the study. We find that in the case of lower J, the jet exhibits large unsteadiness, with larger wavelength Rayleigh–Taylor (RT) waves on the windward surface. In contrast, as the J increases, the unsteadiness decreases, smaller and more regular RT wavelength is formed due to the enhanced drag resulting from the reduced jet deflection. However, irrespective of J, in the case of AR = 0.3 and 1, the primary atomization mechanism is due to the formation of Kelvin–Helmholtz instabilities on the lateral surfaces. Furthermore, in the case of lower J, the shock waves formed upstream of the jet are highly corrugated with significant variations in time. The intense interaction of the liquid jet with the oncoming boundary layer streaks, in the case of lower J, is the primary source of large-scale unsteadiness. These findings highlight the significance of J on the atomization mechanism in supersonic cross-flow.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Elliptical liquid jets in a supersonic cross-flow: Influence of J on atomization mechanism and unsteadiness
In our previous study [Medipati et al., J. Fluid Mech. 1014, A34 (2025)], a detailed experimental investigation is performed on the elliptical liquid jets in a supersonic cross-flow (M∞ = 2.5), focusing on the effect of orifice aspect ratio (AR = spanwise dimension/streamwise dimension) on the atomization mechanism for a fixed momentum flux ratio (J). In this paper, we present experimental studies that show the influence of J on the jet breakup mechanism, shock structures, and unsteady interactions for each AR. A wide range of J values (1.5–9.7) and three AR cases (0.3, 1, and 3.3) are chosen for the study. We find that in the case of lower J, the jet exhibits large unsteadiness, with larger wavelength Rayleigh–Taylor (RT) waves on the windward surface. In contrast, as the J increases, the unsteadiness decreases, smaller and more regular RT wavelength is formed due to the enhanced drag resulting from the reduced jet deflection. However, irrespective of J, in the case of AR = 0.3 and 1, the primary atomization mechanism is due to the formation of Kelvin–Helmholtz instabilities on the lateral surfaces. Furthermore, in the case of lower J, the shock waves formed upstream of the jet are highly corrugated with significant variations in time. The intense interaction of the liquid jet with the oncoming boundary layer streaks, in the case of lower J, is the primary source of large-scale unsteadiness. These findings highlight the significance of J on the atomization mechanism in supersonic cross-flow.
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
Interaction of a bubble with vortical structures in a horizontal turbulent channel flow
The two-way coupled interaction of bubbles with the turbulent flow is not well understood. The studies that have been done generally focus on the integral/global properties of turbulence, and there have been almost no studies on the local/bubble-scale viewpoint. To address this, we experimentally study the two-way interaction of a single bubble with naturally occurring bubble-scale vortical structures present in a fully developed horizontal turbulent channel flow. These interactions are directly measured using time-resolved particle image velocimetry, enabling links between the vortical structure evolution and the bubble trajectory in such flows. We observe that for the same bubble diameter Db and channel flow Reynolds number Re, but for different realizations, bubbles injected at the bottom wall have three broadly different types of bubble paths, which include sliding along the wall, bouncing motions, and vertical escape from the vicinity of the wall. The time-resolved vorticity field measurements show that these bubble trajectories are a direct result of the interactions of the bubble with the evolving vortical structure present in the vicinity of the bubble. This is also illustrated using a simple Lagrangian particle tracking model for the bubble in the vicinity of an evolving vortical structure.
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
Interaction of a bubble with vortical structures in a horizontal turbulent channel flow
The two-way coupled interaction of bubbles with the turbulent flow is not well understood. The studies that have been done generally focus on the integral/global properties of turbulence, and there have been almost no studies on the local/bubble-scale viewpoint. To address this, we experimentally study the two-way interaction of a single bubble with naturally occurring bubble-scale vortical structures present in a fully developed horizontal turbulent channel flow. These interactions are directly measured using time-resolved particle image velocimetry, enabling links between the vortical structure evolution and the bubble trajectory in such flows. We observe that for the same bubble diameter Db and channel flow Reynolds number Re, but for different realizations, bubbles injected at the bottom wall have three broadly different types of bubble paths, which include sliding along the wall, bouncing motions, and vertical escape from the vicinity of the wall. The time-resolved vorticity field measurements show that these bubble trajectories are a direct result of the interactions of the bubble with the evolving vortical structure present in the vicinity of the bubble. This is also illustrated using a simple Lagrangian particle tracking model for the bubble in the vicinity of an evolving vortical structure.
- Open Access
Elliptical liquid jets in a supersonic cross-flow: Influence of J on atomization mechanism and unsteadiness
In our previous study [Medipati \textit{et al}., (2025) \textit{J. Fluid Mech}. \textbf{1014}, A34] \cite{medipati2025elliptic}, a detailed experimental investigation is performed on the elliptical liquid jets in a supersonic cross-flow ($M_{\infty}$ = 2.5), focusing on the effect of orifice aspect ratio ($AR$ = spanwise dimension/streamwise dimension) on the atomization mechanism for a fixed momentum flux ratio ($J$). In this paper, we present experimental studies that show the influence of $J$ on the jet breakup mechanism, shock structures, and unsteady interactions for each $AR$. A wide range of $J$ values (1.5 to 9.7) and three $AR$ cases (0.3, 1, and 3.3) are chosen for the study. We find that in the case of lower $J$, the jet exhibits large unsteadiness, with larger wavelength Rayleigh-Taylor (RT) waves on the windward surface. In contrast, as the $J$ increases, the unsteadiness decreases, smaller and more regular RT wavelength is formed due to the enhanced drag resulting from the reduced jet deflection. However, irrespective of $J$, in the case of $AR$ = 0.3 and 1, the primary atomization mechanism is due to the formation of Kelvin-Helmholtz instabilities (KHI) on the lateral surfaces. Furthermore, in the case of lower $J$, the shock waves formed upstream of the jet are highly corrugated with significant variations in time. The intense interaction of the liquid jet with the oncoming boundary layer streaks, in the case of lower $J$, is the primary source of large-scale unsteadiness. These findings highlight the significance of $J$ on the atomization mechanism in supersonic cross-flow.Open AccessElliptical liquid jets in a supersonic cross-flow: Influence of J on atomization mechanism and unsteadiness
In our previous study [Medipati \textit{et al}., (2025) \textit{J. Fluid Mech}. \textbf{1014}, A34] \cite{medipati2025elliptic}, a detailed experimental investigation is performed on the elliptical liquid jets in a supersonic cross-flow ($M_{\infty}$ = 2.5), focusing on the effect of orifice aspect ratio ($AR$ = spanwise dimension/streamwise dimension) on the atomization mechanism for a fixed momentum flux ratio ($J$). In this paper, we present experimental studies that show the influence of $J$ on the jet breakup mechanism, shock structures, and unsteady interactions for each $AR$. A wide range of $J$ values (1.5 to 9.7) and three $AR$ cases (0.3, 1, and 3.3) are chosen for the study. We find that in the case of lower $J$, the jet exhibits large unsteadiness, with larger wavelength Rayleigh-Taylor (RT) waves on the windward surface. In contrast, as the $J$ increases, the unsteadiness decreases, smaller and more regular RT wavelength is formed due to the enhanced drag resulting from the reduced jet deflection. However, irrespective of $J$, in the case of $AR$ = 0.3 and 1, the primary atomization mechanism is due to the formation of Kelvin-Helmholtz instabilities (KHI) on the lateral surfaces. Furthermore, in the case of lower $J$, the shock waves formed upstream of the jet are highly corrugated with significant variations in time. The intense interaction of the liquid jet with the oncoming boundary layer streaks, in the case of lower $J$, is the primary source of large-scale unsteadiness. These findings highlight the significance of $J$ on the atomization mechanism in supersonic cross-flow. - Open Access
- 17 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1015
Interaction of a vortex ring with a buoyant spherical particle: effects of particle size on vorticity dynamics and particle dynamics
The present work experimentally investigates the interaction of a buoyant (rigid) spherical particle with a single translating (water) vortex ring, focusing on the effects of particle-to-vortex core size ratio ( $D_p/D_{c,o}$ ) on both the particle dynamics and ring dynamics ( $D_p$ = particle diameter, $D_{c,o}$ = vortex core diameter). These interactions are studied for $D_p/D_{c,o}$ = 0.6–1.7, over ring Reynolds numbers ( $Re={\varGamma }/{\nu }$ ; $\varGamma$ = ring circulation) of 6000–67 300. As the buoyant particle comes close to the ring, it gets captured into the low-pressure vortex core, and the interaction begins. The particle within the core undergoes radial oscillation, spins and translates along the ring’s azimuthal axis. As $D_p/D_{c,o}$ increases, the particle undergoes higher-amplitude radial oscillation and a relatively shorter azimuthal translation. The differences in the particle size and its motion within the ring lead to large differences in the ring’s dynamics. A larger particle is seen to lead to a higher ring disruption, substantially reducing the ring’s convection speed and azimuthal enstrophy, which are seen to scale as $(D_p/D_{c,o})^{2.3}Re^{-0.37}$ and $(D_p/D_{c,o})^{1.3}Re^{-0.25}$ , respectively. The ring disruption is significant above $D_p/D_{c,o}\approx$ 1.0, beyond which the ring fragments, with up to 60 % drop in convection speed and 90 % drop in enstrophy, at low $Re$ , as compared with the base ring. These results for the rigid particle size effects on the vortex ring dynamics are more dramatic than for a deforming bubble. Our results could help to better understand and model buoyant particle (and bubble) interactions with coherent structures in turbulence.- 17 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1015
Open AccessInteraction of a vortex ring with a buoyant spherical particle: effects of particle size on vorticity dynamics and particle dynamics
The present work experimentally investigates the interaction of a buoyant (rigid) spherical particle with a single translating (water) vortex ring, focusing on the effects of particle-to-vortex core size ratio ( $D_p/D_{c,o}$ ) on both the particle dynamics and ring dynamics ( $D_p$ = particle diameter, $D_{c,o}$ = vortex core diameter). These interactions are studied for $D_p/D_{c,o}$ = 0.6–1.7, over ring Reynolds numbers ( $Re={\varGamma }/{\nu }$ ; $\varGamma$ = ring circulation) of 6000–67 300. As the buoyant particle comes close to the ring, it gets captured into the low-pressure vortex core, and the interaction begins. The particle within the core undergoes radial oscillation, spins and translates along the ring’s azimuthal axis. As $D_p/D_{c,o}$ increases, the particle undergoes higher-amplitude radial oscillation and a relatively shorter azimuthal translation. The differences in the particle size and its motion within the ring lead to large differences in the ring’s dynamics. A larger particle is seen to lead to a higher ring disruption, substantially reducing the ring’s convection speed and azimuthal enstrophy, which are seen to scale as $(D_p/D_{c,o})^{2.3}Re^{-0.37}$ and $(D_p/D_{c,o})^{1.3}Re^{-0.25}$ , respectively. The ring disruption is significant above $D_p/D_{c,o}\approx$ 1.0, beyond which the ring fragments, with up to 60 % drop in convection speed and 90 % drop in enstrophy, at low $Re$ , as compared with the base ring. These results for the rigid particle size effects on the vortex ring dynamics are more dramatic than for a deforming bubble. Our results could help to better understand and model buoyant particle (and bubble) interactions with coherent structures in turbulence. - Open Access
- 7 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1014, A34
Elliptic liquid jets in a supersonic cross-flow
In the present work, we experimentally investigate the transverse injection of elliptic liquid jets into a supersonic cross-flow ( $M_\infty$ = 2.5). The primary focus is to understand the effect of injection orifice aspect ratio ( $\textit{AR}$ = spanwise/streamwise dimension), on the liquid jet breakup mechanism, the flow field around the liquid jet and the resulting droplet sizes formed downstream, for three $\textit{AR}$ cases ( $\textit{AR}$ = 0.3, 1, 3.3). We find that the $\textit{AR}$ = 0.3 case has large unsteadiness in the spray core due to relatively large wavelength Rayleigh–Taylor (RT) waves formed on the liquid jet surface. However, the primary jet breakup occurs through Kelvin–Helmholtz (KH) instabilities formed on the large lateral surfaces, as in coaxial liquid jet breakup. This leads to a higher Sauter mean diameter (SMD) of the droplets in the spray core with a wider range of droplet sizes compared with the circular case ( $\textit{AR}$ = 1.0). However, in the case of $\textit{AR}$ = 3.3, the RT waves are more intense and of smaller wavelength due to the large drag on the liquid jet, which results in a direct catastrophic breakup of the liquid jet by the RT waves. This results in a relatively steady liquid jet and shock structure with the formation of a fine spray and smaller droplets in the spray core than for the $\textit{AR}=1.0$ case. The study shows the importance of the orifice $\textit{AR}$ on the flow around, and the spray downstream of, the liquid jet injection into supersonic cross-flow.- 7 July 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1014, A34
Open AccessElliptic liquid jets in a supersonic cross-flow
In the present work, we experimentally investigate the transverse injection of elliptic liquid jets into a supersonic cross-flow ( $M_\infty$ = 2.5). The primary focus is to understand the effect of injection orifice aspect ratio ( $\textit{AR}$ = spanwise/streamwise dimension), on the liquid jet breakup mechanism, the flow field around the liquid jet and the resulting droplet sizes formed downstream, for three $\textit{AR}$ cases ( $\textit{AR}$ = 0.3, 1, 3.3). We find that the $\textit{AR}$ = 0.3 case has large unsteadiness in the spray core due to relatively large wavelength Rayleigh–Taylor (RT) waves formed on the liquid jet surface. However, the primary jet breakup occurs through Kelvin–Helmholtz (KH) instabilities formed on the large lateral surfaces, as in coaxial liquid jet breakup. This leads to a higher Sauter mean diameter (SMD) of the droplets in the spray core with a wider range of droplet sizes compared with the circular case ( $\textit{AR}$ = 1.0). However, in the case of $\textit{AR}$ = 3.3, the RT waves are more intense and of smaller wavelength due to the large drag on the liquid jet, which results in a direct catastrophic breakup of the liquid jet by the RT waves. This results in a relatively steady liquid jet and shock structure with the formation of a fine spray and smaller droplets in the spray core than for the $\textit{AR}=1.0$ case. The study shows the importance of the orifice $\textit{AR}$ on the flow around, and the spray downstream of, the liquid jet injection into supersonic cross-flow. - 16 March 2025
- Published by Springer Nature
- p. 1-11
Vortex-Induced Vibrations of a Cylinder with a Flexible Splitter Plate
- 16 March 2025
- Published by Springer Nature
- p. 1-11
Vortex-Induced Vibrations of a Cylinder with a Flexible Splitter Plate
- 21 March 2024
- Published by Springer Nature in Sādhanā
- Vol. 49 (2) , 1-10
Interaction between an elliptic vortex ring and a bubble: effect of capture angle
- 21 March 2024
- Published by Springer Nature in Sādhanā
- Vol. 49 (2) , 1-10
Interaction between an elliptic vortex ring and a bubble: effect of capture angle
- 25 February 2024
- Published by Springer Nature in Experiments in Fluids
- Vol. 65 (3) , 1-22
Effects of salt concentration on top wall bubble injection in a turbulent channel flow: bubble dynamics and wall drag reduction
- 25 February 2024
- Published by Springer Nature in Experiments in Fluids
- Vol. 65 (3) , 1-22
Effects of salt concentration on top wall bubble injection in a turbulent channel flow: bubble dynamics and wall drag reduction
- Open Access
- 13 November 2023
- Published by Springer Nature in Research Square
Effects of salt concentration on top wall bubble injection in a turbulent channel flow: Bubble dynamics and wall drag reduction
Most applications related to bubble drag reduction (BDR) occur in contaminated environments where the presence of different surface active agents modify bubble coalescence and hence, affect flow drag. Although there have been studies on bubble drag modifications with salt/surfactant, the effects of systematic variation in salt/surfactant concentration on bubble dynamics and drag remain relatively unexplored. Driven by this motivation, in the present work, we experimentally investigate the effects of salt concentration on the bubble dynamics and drag modification in a fully developed horizontal turbulent channel flow for top wall bubble injection, over a wide range of salt concentrations (0< M <0.08, moles/liter), channel Reynolds number (22,500< Re <65,000), and injected bubble void fraction (0< α <0.16). The injected bubbles interact with the flow in the turbulent channel and as they move downstream reach an equilibrium state between the bubbly phase and the fully developed carrier phase that persists further downstream. The equilibrium state of the bubble dynamics is captured by high-speed visualizations and the corresponding drag is obtained from stream-wise pressure drop measurements within the channel. Increasing salt concentration levels is seen to lead to reduction in bubble coalescence and consequently in bubble size that modifies bubble deformability, migration, and distribution near the top wall, with the changes being dependent on the Re and α values. At low Re ≈ 22, 500, the addition of salt leads to a dramatic reduction in bubble sizes (∼ 100 microns) from the very large coalesced bubbles (∼ cm) seen in the no-salt cases, with consequent changes in the bubble dynamics and increased drag (up to 70%). The reduction in bubble sizes with salt addition leads to an increase in drag with salt concentration, which saturates beyond a critical salt concentration (MCritical). With increasing Re, due to smaller time available for coalescence, the bubbles are relatively small even in the absence of salt and hence, the bubble dynamics is found to be less susceptible to modifications by the addition of salt, unlike at low Re, and hence, results in a smaller increase in drag and a lower MCritical. At the largest Re of about 65,000, both the bubble dynamics and drag are found to be very similar in both the no-salt and salt cases indicating that MCritical ≈ 0. Our observations suggest that at low Re, the experiments in typical laboratory freshwater conditions will not predict the bubble dynamics aspects and flow modifications in contaminated environments, while it can be a good indicator at large Re. The present results can thus help deepen our understanding on bubbly flow applications in contaminated environments, such as those that occur in bubble induced drag reductions in ships and pipelines.
- 13 November 2023
- Published by Springer Nature in Research Square
Open AccessEffects of salt concentration on top wall bubble injection in a turbulent channel flow: Bubble dynamics and wall drag reduction
Most applications related to bubble drag reduction (BDR) occur in contaminated environments where the presence of different surface active agents modify bubble coalescence and hence, affect flow drag. Although there have been studies on bubble drag modifications with salt/surfactant, the effects of systematic variation in salt/surfactant concentration on bubble dynamics and drag remain relatively unexplored. Driven by this motivation, in the present work, we experimentally investigate the effects of salt concentration on the bubble dynamics and drag modification in a fully developed horizontal turbulent channel flow for top wall bubble injection, over a wide range of salt concentrations (0< M <0.08, moles/liter), channel Reynolds number (22,500< Re <65,000), and injected bubble void fraction (0< α <0.16). The injected bubbles interact with the flow in the turbulent channel and as they move downstream reach an equilibrium state between the bubbly phase and the fully developed carrier phase that persists further downstream. The equilibrium state of the bubble dynamics is captured by high-speed visualizations and the corresponding drag is obtained from stream-wise pressure drop measurements within the channel. Increasing salt concentration levels is seen to lead to reduction in bubble coalescence and consequently in bubble size that modifies bubble deformability, migration, and distribution near the top wall, with the changes being dependent on the Re and α values. At low Re ≈ 22, 500, the addition of salt leads to a dramatic reduction in bubble sizes (∼ 100 microns) from the very large coalesced bubbles (∼ cm) seen in the no-salt cases, with consequent changes in the bubble dynamics and increased drag (up to 70%). The reduction in bubble sizes with salt addition leads to an increase in drag with salt concentration, which saturates beyond a critical salt concentration (MCritical). With increasing Re, due to smaller time available for coalescence, the bubbles are relatively small even in the absence of salt and hence, the bubble dynamics is found to be less susceptible to modifications by the addition of salt, unlike at low Re, and hence, results in a smaller increase in drag and a lower MCritical. At the largest Re of about 65,000, both the bubble dynamics and drag are found to be very similar in both the no-salt and salt cases indicating that MCritical ≈ 0. Our observations suggest that at low Re, the experiments in typical laboratory freshwater conditions will not predict the bubble dynamics aspects and flow modifications in contaminated environments, while it can be a good indicator at large Re. The present results can thus help deepen our understanding on bubbly flow applications in contaminated environments, such as those that occur in bubble induced drag reductions in ships and pipelines.
- Open Access
- 17 October 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 973, A19
Flow over a circular cylinder with a flexible splitter plate
In the present work, we study the flow field around, and forces acting on, a circular cylinder with an attached flexible splitter plate/flap. Two cases of flap length ( $L/D$ ), namely, $L/D = 5$ and $L/D = 2$ have been investigated focusing on the effect of variations in flap flexural rigidity, $EI$ . We find that for a range of $EI$ and Reynolds numbers $Re = UD/\nu$ , a non-dimensional bending stiffness $K^{\ast }=EI/((1/2)\rho U^2 L^3)$ collapses flap motion and forces on the system well, as long as $Re>5000$ . In the $L/D = 5$ flap case, two periodic flap deformation regimes in the form of travelling waves are identified (modes I and II), with mode I occurring at $K^{\ast } \approx 1.5\times 10^{-3}$ and mode II at lower $K^{\ast }$ values ( $K^{\ast }<3\times 10^{-5}$ ). In the $L/D = 2$ flap case, we find a richer set of flapping modes (modes A, B, C and D) that are differentiated by their flapping characteristics (symmetric/asymmetric and amplitude). Force measurements show that the largest drag reduction occurs in mode I ( $L/D = 5$ ) and mode C ( $L/D = 2$ ), which also correspond to the lowest lift and wake fluctuations, with the mode C wake fluctuations being lower than even the rigid splitter plate case. In contrast, the highest fluctuating lift, in both $L/D$ cases, occurs at higher $K^{\ast }$ , when the wake frequency is close to the first structural bending mode frequency of the flap. The observed rich range of flap/splitter plate dynamics could be useful for applications such as drag reduction, vibration suppression, reduction of wake fluctuations and energy harvesting.- 17 October 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 973, A19
Open AccessFlow over a circular cylinder with a flexible splitter plate
In the present work, we study the flow field around, and forces acting on, a circular cylinder with an attached flexible splitter plate/flap. Two cases of flap length ( $L/D$ ), namely, $L/D = 5$ and $L/D = 2$ have been investigated focusing on the effect of variations in flap flexural rigidity, $EI$ . We find that for a range of $EI$ and Reynolds numbers $Re = UD/\nu$ , a non-dimensional bending stiffness $K^{\ast }=EI/((1/2)\rho U^2 L^3)$ collapses flap motion and forces on the system well, as long as $Re>5000$ . In the $L/D = 5$ flap case, two periodic flap deformation regimes in the form of travelling waves are identified (modes I and II), with mode I occurring at $K^{\ast } \approx 1.5\times 10^{-3}$ and mode II at lower $K^{\ast }$ values ( $K^{\ast }<3\times 10^{-5}$ ). In the $L/D = 2$ flap case, we find a richer set of flapping modes (modes A, B, C and D) that are differentiated by their flapping characteristics (symmetric/asymmetric and amplitude). Force measurements show that the largest drag reduction occurs in mode I ( $L/D = 5$ ) and mode C ( $L/D = 2$ ), which also correspond to the lowest lift and wake fluctuations, with the mode C wake fluctuations being lower than even the rigid splitter plate case. In contrast, the highest fluctuating lift, in both $L/D$ cases, occurs at higher $K^{\ast }$ , when the wake frequency is close to the first structural bending mode frequency of the flap. The observed rich range of flap/splitter plate dynamics could be useful for applications such as drag reduction, vibration suppression, reduction of wake fluctuations and energy harvesting.