Alexandre Louzguiti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexandre Louzguiti has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
- Alexandre Torre
CEA, IRFM, Centre de Cadarache, Saint-Paul-lez-Durance, France
10 shared publications - Louis Zani
Fusion for Energy, Garching, Germany
10 shared publications - Frederic Topin
IUSTI, Universit d'Aix Marseille, Marseille, France, 13453
6 shared publications - Benoit Lacroix
CEA-IRFM, St-Paul Lez Durance, France
5 shared publications - Jose Lorenzo
Fusion for Energy, Barcelona, Spain
4 shared publications - Lorenzo Cavallucci
Department of Electrical, Electronic and Information Engineering, University di Bologna, Bologna, Italy
4 shared publications
Latest Publications
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-6
Optimization of HTS Coils for Sustainable Magnets Applied to Particles Therapy
Particle therapy is a very promising radiation treatment capable to irradiate tumours with millimetres precision and therefore to spare the neighbouring healthy tissues. The proton therapy market size is expected to keep growing in the next decade, but the size and initial cost still need to face challenges. High Temperature Superconductors (HTS) could be a possible way to enable particle treatment with a reduction of the facility size and the operational costs. However, the extraction of Rare-Earth materials such as the ones used for the most commercialized HTS tapes is extremely polluting if compared to copper. In that sense, when designing a magnet for an emerging technology, it is important to minimize the environmental impact by minimizing the size of the coil. This paper, with the help of a case study, aims at showing how the CO2-eq emissions can change as a function of design parameters, such as the current margin and the operative temperature. These emissions are then compared to the ones due to the power consumption. The study is based on the energy selection dipoles of Gantry 1 beamline at the Paul Scherrer Institute (PSI).
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-6
Optimization of HTS Coils for Sustainable Magnets Applied to Particles Therapy
Particle therapy is a very promising radiation treatment capable to irradiate tumours with millimetres precision and therefore to spare the neighbouring healthy tissues. The proton therapy market size is expected to keep growing in the next decade, but the size and initial cost still need to face challenges. High Temperature Superconductors (HTS) could be a possible way to enable particle treatment with a reduction of the facility size and the operational costs. However, the extraction of Rare-Earth materials such as the ones used for the most commercialized HTS tapes is extremely polluting if compared to copper. In that sense, when designing a magnet for an emerging technology, it is important to minimize the environmental impact by minimizing the size of the coil. This paper, with the help of a case study, aims at showing how the CO2-eq emissions can change as a function of design parameters, such as the current margin and the operative temperature. These emissions are then compared to the ones due to the power consumption. The study is based on the energy selection dipoles of Gantry 1 beamline at the Paul Scherrer Institute (PSI).
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-6
Impact of Axial and Bending Effective Strain on the T cs of ITER TF Conductors
Given the intrinsic brittleness and strain-sensitive electromechanical behaviour of Nb3Sn, significant efforts have been made in the past to investigate the effects of strain on Nb3Sn based Cable in Conduit Conductors (CICCs). An extensive test campaign was conducted at the SULTAN facility (Villigen, CH) on the ITER TF qualification and production samples. A dedicated campaign was carried out to study the impact of electromagnetic and thermal cycling loads on TF conductors. Finally, a TF conductor sample was tested at the SULTAN facility under conditions relevant to the operation of an ITER TF coil in standalone configuration. These conditions are foreseen for the Magnet Cold Test Bench (MCTB), currently under development at ITER. In this work, the evolution of the current sharing temperature during cyclic loading is analyzed with an approach which distinguishes between the contributions of axial and bending strain, rather than considering one single axial effective strain.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-6
Impact of Axial and Bending Effective Strain on the T cs of ITER TF Conductors
Given the intrinsic brittleness and strain-sensitive electromechanical behaviour of Nb3Sn, significant efforts have been made in the past to investigate the effects of strain on Nb3Sn based Cable in Conduit Conductors (CICCs). An extensive test campaign was conducted at the SULTAN facility (Villigen, CH) on the ITER TF qualification and production samples. A dedicated campaign was carried out to study the impact of electromagnetic and thermal cycling loads on TF conductors. Finally, a TF conductor sample was tested at the SULTAN facility under conditions relevant to the operation of an ITER TF coil in standalone configuration. These conditions are foreseen for the Magnet Cold Test Bench (MCTB), currently under development at ITER. In this work, the evolution of the current sharing temperature during cyclic loading is analyzed with an approach which distinguishes between the contributions of axial and bending strain, rather than considering one single axial effective strain.
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
On the Evaluation of Current Sharing Temperature Within Conductors of ITER Toroidal Field Coils in Operation
The nineteen ITER Toroidal Field (TF) coils (including a spare one) consists of seven double pancakes (DP) of cable-in-conduit conductors (CICC), each containing 900 superconducting Nb3Sn strands. In total eight strand manufacturing companies were involved, either relying on the bronze route or internal tin process. As a result, the strand, and thus conductor, performance can vary significantly within the same TF coil. This peculiarity inherent to the ITER project makes the evaluation process of coils stability, linked to the current sharing temperature (Tcs), more delicate. Following an extensive conductor testing campaign carried out over several years within the SULTAN facility, degradation of the different TF conductors was observed along electromagnetic and thermal cycling. Relying on the ITER critical current scaling law and associated parameters for TF strands, effective strain properties and n-values were extracted from the SULTAN Tcs measurements. In parallel, recent simulations conducted with MULTIFIL (mechanical code) on TF CICC have shed some light on the strands mechanical state after cool-down and along electro-magnetic cycling, highlighting the importance of the bending strain. Capitalizing on these results, on the SULTAN database, and on the literature (already mentioning the bending strain effect on conductor degradation), we aim at refining the existing methodology of performance scale-up from strands to conductors by introducing the bending strain. Ultimately, we apply the model in an attempt to conciliate SULTAN Tcs measurements and MULTIFIL mechanical results.
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
On the Evaluation of Current Sharing Temperature Within Conductors of ITER Toroidal Field Coils in Operation
The nineteen ITER Toroidal Field (TF) coils (including a spare one) consists of seven double pancakes (DP) of cable-in-conduit conductors (CICC), each containing 900 superconducting Nb3Sn strands. In total eight strand manufacturing companies were involved, either relying on the bronze route or internal tin process. As a result, the strand, and thus conductor, performance can vary significantly within the same TF coil. This peculiarity inherent to the ITER project makes the evaluation process of coils stability, linked to the current sharing temperature (Tcs), more delicate. Following an extensive conductor testing campaign carried out over several years within the SULTAN facility, degradation of the different TF conductors was observed along electromagnetic and thermal cycling. Relying on the ITER critical current scaling law and associated parameters for TF strands, effective strain properties and n-values were extracted from the SULTAN Tcs measurements. In parallel, recent simulations conducted with MULTIFIL (mechanical code) on TF CICC have shed some light on the strands mechanical state after cool-down and along electro-magnetic cycling, highlighting the importance of the bending strain. Capitalizing on these results, on the SULTAN database, and on the literature (already mentioning the bending strain effect on conductor degradation), we aim at refining the existing methodology of performance scale-up from strands to conductors by introducing the bending strain. Ultimately, we apply the model in an attempt to conciliate SULTAN Tcs measurements and MULTIFIL mechanical results.
- 4 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
EM Simulations for the ITER Magnet Cold Test Bench – TF Coil Fast Discharge
While the ITER assembly is progressing, a Magnet Cold Test Bench (MCTB) is also under preparation to test some of the ITER superconducting coils at 4 K up to nominal current before their installation in the pit. In this context transient Electro-Magnetic (EM) calculations were performed to estimate the impact of AC losses and eddy currents on the cryogenic and mechanical performance of the coils and other components of the MCTB. In particular the case of a fast exponential discharge is investigated, which represents the most severe transient operation expected for MCTB. Although different types of ITER coils are considered for the tests (several Toroidal Field Coils and Poloidal Field Coil number 1), the following discussion will be limited to the operation of a single Toroidal Field (TF) coil. Detailed results of the EM analysis, such as field maps, AC losses and QD voltages will be presented.
- 4 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
EM Simulations for the ITER Magnet Cold Test Bench – TF Coil Fast Discharge
While the ITER assembly is progressing, a Magnet Cold Test Bench (MCTB) is also under preparation to test some of the ITER superconducting coils at 4 K up to nominal current before their installation in the pit. In this context transient Electro-Magnetic (EM) calculations were performed to estimate the impact of AC losses and eddy currents on the cryogenic and mechanical performance of the coils and other components of the MCTB. In particular the case of a fast exponential discharge is investigated, which represents the most severe transient operation expected for MCTB. Although different types of ITER coils are considered for the tests (several Toroidal Field Coils and Poloidal Field Coil number 1), the following discussion will be limited to the operation of a single Toroidal Field (TF) coil. Detailed results of the EM analysis, such as field maps, AC losses and QD voltages will be presented.
- 12 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Upgrade of CICC Mechanical Model and Case Study of ITER TF Conductor in Cold Test Conditions
This paper proposes to use an upgraded version of the Multifil simulation tool to model an ITER TF-like conductor in two cases: In tokamak and in cold test conditions. After briefly introducing the Multifil code, the paper will report the latest upgrades in terms of thermal equilibrium as well as simultaneous Lorentz and coil operational loads. We will present a new post-processing of the fractured filamentary area, which relies on a memory of the fracture map along all the loading steps. Then, considering ITER is currently building a magnet coil test bench (MCTB) with the capability to cold test some of the TF coils at nominal current (68 kA) in a standalone situation, we will discuss how mechanical modelling of the TF conductor is relevant for assessing the impact of the test sequence on the Nb3Sn conductor degradation. We will present a new loading sequence, representative of the test facility conditions, with a different Lorentz force direction and amplitude with respect to tokamak operation. Furthermore, the MCTB test implies an additional over-compression of conductors located in the straight leg of the TF coil in equatorial plane. The effect of this “cold-test cycling” will be discussed in terms of mechanical behavior, fracture of strands and tentative Tcs degradation estimation.
- 12 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Upgrade of CICC Mechanical Model and Case Study of ITER TF Conductor in Cold Test Conditions
This paper proposes to use an upgraded version of the Multifil simulation tool to model an ITER TF-like conductor in two cases: In tokamak and in cold test conditions. After briefly introducing the Multifil code, the paper will report the latest upgrades in terms of thermal equilibrium as well as simultaneous Lorentz and coil operational loads. We will present a new post-processing of the fractured filamentary area, which relies on a memory of the fracture map along all the loading steps. Then, considering ITER is currently building a magnet coil test bench (MCTB) with the capability to cold test some of the TF coils at nominal current (68 kA) in a standalone situation, we will discuss how mechanical modelling of the TF conductor is relevant for assessing the impact of the test sequence on the Nb3Sn conductor degradation. We will present a new loading sequence, representative of the test facility conditions, with a different Lorentz force direction and amplitude with respect to tokamak operation. Furthermore, the MCTB test implies an additional over-compression of conductors located in the straight leg of the TF coil in equatorial plane. The effect of this “cold-test cycling” will be discussed in terms of mechanical behavior, fracture of strands and tentative Tcs degradation estimation.
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Updated Stability Analysis of the PF/CC Models With the ITER DINA 2016 Plasma Scenario
In the ITER project, the Poloidal Field (PF) and Correction Coils (CC) - all made of Nb-Ti conductors - share the same supercritical Helium cooling loop at about 4.5 K. Recently, the associated thermo-hydraulic model developed with SuperMagnet has been updated to obtain a more accurate description of this cryomagnetic system. These changes include integration of feeders, more detailed cryodistribution circuits and refined coil geometries, with the general aim at approaching as much as possible the as-built configuration. In parallel, currents, magnetic field maps and magnet heat loads (mainly AC losses) associated with the ITER DINA 2016 plasma scenario have been included in this model together with refined nuclear heating to evaluate the corresponding PF and CC conductor minimum temperature margins; the objective being to ensure that they remain above the specification value of 1.5 K.
- 18 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Updated Stability Analysis of the PF/CC Models With the ITER DINA 2016 Plasma Scenario
In the ITER project, the Poloidal Field (PF) and Correction Coils (CC) - all made of Nb-Ti conductors - share the same supercritical Helium cooling loop at about 4.5 K. Recently, the associated thermo-hydraulic model developed with SuperMagnet has been updated to obtain a more accurate description of this cryomagnetic system. These changes include integration of feeders, more detailed cryodistribution circuits and refined coil geometries, with the general aim at approaching as much as possible the as-built configuration. In parallel, currents, magnetic field maps and magnet heat loads (mainly AC losses) associated with the ITER DINA 2016 plasma scenario have been included in this model together with refined nuclear heating to evaluate the corresponding PF and CC conductor minimum temperature margins; the objective being to ensure that they remain above the specification value of 1.5 K.
- 12 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Extended Analysis of TF02 Feeder Performance and Risks During Operation in JT-60SA Tokamak
The upgrade to JT-60SA tokamak (R = 3 m, a = 1.2 m) was conducted within a Europe-Japan collaboration agreement featuring the implementation of superconducting magnets. In 2021, the magnet system commissioning was initiated, undergoing cool-down and energization of the 18 Nb-Ti Toroidal Field (TF) coils (400 tonnes) up to full nominal current. TF energization was smoothly processed but it was observed during current load a higher outlet temperature increase of TF02 coil versus others, indicating a higher resistance in this coil circuit and therefore a possible risk in future operation. The present paper analyses the different risk factors that can impact the TF operation safety margins and their quantitative contribution. To this end on the one hand ad-hoc thermal & thermo-hydraulic models were developed by CEA and F4E to represent the TF02 whole circuit including feeder zone where high resistance is suspected to be located. The outcomes of those models on chosen TF and PF current scenarios including transient loads and their impact on temperature margin in risky zones such as terminal joint (TJ) are presented. On the another hand a 3D electrical circuit of TJ was modelled using TF cables tomography, giving a realistic quantitative insight into local current distribution, therefore on current sharing temperature. The analyses outcomes synthesis is depicted under strategic considerations and tentatively contributes to establishing guidelines for future operation scenarios in which magnets will undergo demanding conditions.
- 12 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Extended Analysis of TF02 Feeder Performance and Risks During Operation in JT-60SA Tokamak
The upgrade to JT-60SA tokamak (R = 3 m, a = 1.2 m) was conducted within a Europe-Japan collaboration agreement featuring the implementation of superconducting magnets. In 2021, the magnet system commissioning was initiated, undergoing cool-down and energization of the 18 Nb-Ti Toroidal Field (TF) coils (400 tonnes) up to full nominal current. TF energization was smoothly processed but it was observed during current load a higher outlet temperature increase of TF02 coil versus others, indicating a higher resistance in this coil circuit and therefore a possible risk in future operation. The present paper analyses the different risk factors that can impact the TF operation safety margins and their quantitative contribution. To this end on the one hand ad-hoc thermal & thermo-hydraulic models were developed by CEA and F4E to represent the TF02 whole circuit including feeder zone where high resistance is suspected to be located. The outcomes of those models on chosen TF and PF current scenarios including transient loads and their impact on temperature margin in risky zones such as terminal joint (TJ) are presented. On the another hand a 3D electrical circuit of TJ was modelled using TF cables tomography, giving a realistic quantitative insight into local current distribution, therefore on current sharing temperature. The analyses outcomes synthesis is depicted under strategic considerations and tentatively contributes to establishing guidelines for future operation scenarios in which magnets will undergo demanding conditions.
- 5 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Study of Hysteresis Losses in Partial Penetration Oscillations Through Experiment, Analytical Algorithm and New Numerical Tool
In this paper, we aim at describing the hysteretic losses in superconducting conductors in the specific case of multiple field reversals in partial penetration, which produces a complex field profile in the superconductor, and which happens quite extensively in complex field scenarios like those of fusion magnets. The paper will introduce the usual analytical formulas used for computing the hysteresis losses, pointing out their limits, before explaining the specific algorithm implemented to use these formulas in alternating partial penetration fields. An experiment on the JT60-SA TF superconducting cable has been performed, in the Josefa facility at CEA, with a field variation explicitly trying to reproduce multiple partial penetration field reversals. The analysis of the experimental curves and results is presented and compared with analytical and the new numerical code. This new tool called FLASH has been built to describe precisely the field penetration of any external field waveform in partial or full penetration. The main hypotheses of the tool are briefly described, along with examples of outputs for simple field variations that serve as cross-check and validation of the code.
- 5 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Study of Hysteresis Losses in Partial Penetration Oscillations Through Experiment, Analytical Algorithm and New Numerical Tool
In this paper, we aim at describing the hysteretic losses in superconducting conductors in the specific case of multiple field reversals in partial penetration, which produces a complex field profile in the superconductor, and which happens quite extensively in complex field scenarios like those of fusion magnets. The paper will introduce the usual analytical formulas used for computing the hysteresis losses, pointing out their limits, before explaining the specific algorithm implemented to use these formulas in alternating partial penetration fields. An experiment on the JT60-SA TF superconducting cable has been performed, in the Josefa facility at CEA, with a field variation explicitly trying to reproduce multiple partial penetration field reversals. The analysis of the experimental curves and results is presented and compared with analytical and the new numerical code. This new tool called FLASH has been built to describe precisely the field penetration of any external field waveform in partial or full penetration. The main hypotheses of the tool are briefly described, along with examples of outputs for simple field variations that serve as cross-check and validation of the code.
- 2 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Latest Developments of OLYMPE Platform for Optimizing Design of Fusion Cryomagnetic Systems
In the framework of design studies for large fusion magnets, the development of the OLYMPE multi-physic platform is ongoing at CEA. This platform gathers different solvers and codes for addressing the interdependent analyses required for tokamak superconducting magnet design. The present article focuses on the coupling between conductor design, thermohydraulics, and electromagnetism. The corresponding OLYMPE module aims at producing factors of merit such as the amount of superconducting material, together with major parameters impacting the cryogenic system (operating conditions, thermal loads on the magnet). The Thermo-Hydraulic Design (THD) loop was first developed for TF magnet, considering the most critical conductor and a single burn cycle. The loop is improved by extending the model to coil scale, thus including the whole winding pack, and by considering four burn-dwell cycles so as to reach a periodic behaviour. The case of an EU-DEMO TF magnet design is applied, and the comparison of results before and after THD loop upgrade confirms the validity of first loop version for exploratory studies. The second part of the study focuses on the development of CS magnet design module. The dimensioning process specific to CS results in significant differences with the TF design loop. In particular, the CS design loop requires updating the magnetic field distribution at each design iteration, while the assessment of AC losses thermal load requires defining a scenario for the current in each CS module. Consequently, the CS design process merges electromagnetic and thermohydraulic loops. The workflow is applied to an EU-DEMO CS magnet design.
- 2 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Latest Developments of OLYMPE Platform for Optimizing Design of Fusion Cryomagnetic Systems
In the framework of design studies for large fusion magnets, the development of the OLYMPE multi-physic platform is ongoing at CEA. This platform gathers different solvers and codes for addressing the interdependent analyses required for tokamak superconducting magnet design. The present article focuses on the coupling between conductor design, thermohydraulics, and electromagnetism. The corresponding OLYMPE module aims at producing factors of merit such as the amount of superconducting material, together with major parameters impacting the cryogenic system (operating conditions, thermal loads on the magnet). The Thermo-Hydraulic Design (THD) loop was first developed for TF magnet, considering the most critical conductor and a single burn cycle. The loop is improved by extending the model to coil scale, thus including the whole winding pack, and by considering four burn-dwell cycles so as to reach a periodic behaviour. The case of an EU-DEMO TF magnet design is applied, and the comparison of results before and after THD loop upgrade confirms the validity of first loop version for exploratory studies. The second part of the study focuses on the development of CS magnet design module. The dimensioning process specific to CS results in significant differences with the TF design loop. In particular, the CS design loop requires updating the magnetic field distribution at each design iteration, while the assessment of AC losses thermal load requires defining a scenario for the current in each CS module. Consequently, the CS design process merges electromagnetic and thermohydraulic loops. The workflow is applied to an EU-DEMO CS magnet design.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Thermo-Hydraulic Modeling of JT-60SA TF02 Coil and Feeder for First Operation Predictions
During the commissioning phase of JT-60SA magnet system, which included the cool-down in 2020 and the energization of the 18 Toroidal Field (TF) coils up to a nominal current of 25.7 kA in 2021, the combined helium flow issued from TF02 coil and feeder outlet showed a higher temperature profile than the one of the other TF coils when energized, pointing to the presence of an extra joint resistance in the TF02 and associated feeder circuit. To analyze this temperature excursion and the potential associated risks, the TF02 hydraulic circuit and feeder have been modelled with the thermo-hydraulic CryoSoft suite in the framework of a collaboration between Fusion for Energy and CEA. This paper describes the different numerical models developed along with simplifying analytical strategies, comprising detailed THEA models of the TF02 feeder and a model of the TF02 hydraulic circuit in FLOWER. These models consider the variable thermal and hydraulic geometry along the feeder length, include static and transient heat loads from different sources, and account for the heat exchange between the feeder and the TF02 Lateral Pancake at the feeder Terminal Joint (TJ), thus enabling a detailed description of the helium temperature variations in the system. In addition to the static energization load, the discharge of the Equilibrium Field coils has been modelled and its impact on the helium temperature at the outlet and feeder TJ analyzed. Model results show that the temperature excursion due to a faulty joint in the feeder should not put at risk the operation of TF02 coil.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-5
Thermo-Hydraulic Modeling of JT-60SA TF02 Coil and Feeder for First Operation Predictions
During the commissioning phase of JT-60SA magnet system, which included the cool-down in 2020 and the energization of the 18 Toroidal Field (TF) coils up to a nominal current of 25.7 kA in 2021, the combined helium flow issued from TF02 coil and feeder outlet showed a higher temperature profile than the one of the other TF coils when energized, pointing to the presence of an extra joint resistance in the TF02 and associated feeder circuit. To analyze this temperature excursion and the potential associated risks, the TF02 hydraulic circuit and feeder have been modelled with the thermo-hydraulic CryoSoft suite in the framework of a collaboration between Fusion for Energy and CEA. This paper describes the different numerical models developed along with simplifying analytical strategies, comprising detailed THEA models of the TF02 feeder and a model of the TF02 hydraulic circuit in FLOWER. These models consider the variable thermal and hydraulic geometry along the feeder length, include static and transient heat loads from different sources, and account for the heat exchange between the feeder and the TF02 Lateral Pancake at the feeder Terminal Joint (TJ), thus enabling a detailed description of the helium temperature variations in the system. In addition to the static energization load, the discharge of the Equilibrium Field coils has been modelled and its impact on the helium temperature at the outlet and feeder TJ analyzed. Model results show that the temperature excursion due to a faulty joint in the feeder should not put at risk the operation of TF02 coil.