Hugo Corres
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hugo Corres has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Leonardo Todisco
E.T.S. Ingenieros de Caminos, Canales y Puertos, Laboratorio de Estructuras Universidad Politécnica de Madrid Madrid Spain
9 shared publications - Alejandro Pérez Caldentey
Department of Continuum Mechanics and Structures Universidad Politécnica de Madrid Madrid Spain
4 shared publications - Rafael Ruiz
Laboratorio de Estructuras Universidad Politécnica de Madrid, E.T.S. Ingenieros de Caminos, Canales y Puertos Madrid Spain
4 shared publications - Borja Regúlez
Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos Universidad Politécnica de Madrid Madrid Spain
2 shared publications - Duarte M. Viúla Faria
MFIC Ingénieurs Civils SA Morges Switzerland
2 shared publications - Miguel Fernández Ruiz
Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos Universidad Politécnica de Madrid Madrid Spain
2 shared publications
Latest Publications
- 29 December 2024
- Published by Springer Nature
- p. 120-127
Reducing Embodied Carbon and Enhancing Performance in Bridge Construction Using High-Performance Steel Fibre Reinforced Concrete
- 29 December 2024
- Published by Springer Nature
- p. 120-127
Reducing Embodied Carbon and Enhancing Performance in Bridge Construction Using High-Performance Steel Fibre Reinforced Concrete
- Open Access
- 4 February 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (2) , 935-955
Experimental characterization of a cost‐competitive tailor‐made HPFRC mix design for wide application in precast girder of roadway bridges
This paper presents a comprehensive study on the development of a cost‐effective, high‐performance fiber reinforced concrete (HPFRC) for the construction of a 60 m‐span U‐girder roadway bridge without stirrups in the webs, meeting the design requirements of fck ≥ 100 MPa and the post‐cracking flexural strength fR3k ≈ 8–10 MPa. The main objective of this research is to develop a F5 workability class HPFRC that meets the specified design criteria without exceeding 2.5–3.0 times the cost of a C70/85. To achieve this goal, the concrete mix was obtained using 500 kg/m3 of cement and 50 kg/m3 of silica fume. This mix was investigated with nine different combinations of fibers and fiber contents, resulting that 80 kg/m3 of 4D‐fibers (lf = 60 mm) provided the optimal fR3k without compromising workability and cost. Subsequently, an extensive experimental campaign was conducted to cast the U‐girder following the conventional casting techniques involving casting prismatic samples, L‐shaped and rectangular‐shaped panels to represent different parts of the U‐girder. Innovative techniques were used to study the effect of different waiting times between concrete pours. Results from the testing of the prismatic specimens evidenced the need of stitching by means of a poker vibrator planes between successive concrete layers. Furthermore, the study of the panels evidenced that a waiting time of 90 min allows the HPFRC to achieve enough bending and compressive strength to bear internal vibration of the element without liquefying and, at the same time, avoiding cold joints. The results confirm the applicability of the developed HPFRC for the structural element under study following conventional casting techniques.
- 4 February 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (2) , 935-955
Open AccessExperimental characterization of a cost‐competitive tailor‐made HPFRC mix design for wide application in precast girder of roadway bridges
This paper presents a comprehensive study on the development of a cost‐effective, high‐performance fiber reinforced concrete (HPFRC) for the construction of a 60 m‐span U‐girder roadway bridge without stirrups in the webs, meeting the design requirements of fck ≥ 100 MPa and the post‐cracking flexural strength fR3k ≈ 8–10 MPa. The main objective of this research is to develop a F5 workability class HPFRC that meets the specified design criteria without exceeding 2.5–3.0 times the cost of a C70/85. To achieve this goal, the concrete mix was obtained using 500 kg/m3 of cement and 50 kg/m3 of silica fume. This mix was investigated with nine different combinations of fibers and fiber contents, resulting that 80 kg/m3 of 4D‐fibers (lf = 60 mm) provided the optimal fR3k without compromising workability and cost. Subsequently, an extensive experimental campaign was conducted to cast the U‐girder following the conventional casting techniques involving casting prismatic samples, L‐shaped and rectangular‐shaped panels to represent different parts of the U‐girder. Innovative techniques were used to study the effect of different waiting times between concrete pours. Results from the testing of the prismatic specimens evidenced the need of stitching by means of a poker vibrator planes between successive concrete layers. Furthermore, the study of the panels evidenced that a waiting time of 90 min allows the HPFRC to achieve enough bending and compressive strength to bear internal vibration of the element without liquefying and, at the same time, avoiding cold joints. The results confirm the applicability of the developed HPFRC for the structural element under study following conventional casting techniques.
- Open Access
- 23 May 2023
- Published by Wiley in Structural Concrete
- Vol. 24 (4) , 4530-4548
Reliability‐ and sustainability‐driven strategies for the maintenance of existing structures
The management of existing structures is raising a number of pertinent questions to the owners and engineers. Many structures built more than 50 years ago (even those built hundreds of years ago) usually no longer comply with safety requirements of current codes, which are typically addressed in new structures. This is not necessarily only caused by a poor original design or degradation with time, but it may be, for example, the consequence of increase in actions, reducing the level of reliability of a structure. This paper focuses on strategies to be adopted for existing structures which do not comply with code requirements for new constructions (e.g., to repair, to demolish, to rebuild, etc.) on the basis of a more holistic approach that includes economic, social, and environmental considerations. To that aim, first, a brief review of the background concepts on the reliability of structures is presented, highlighting the differences for new and existing structures. Following this analysis, suitable values for the reliability index (including sustainability considerations) are proposed, as well as tailored maintenance strategies. Finally, the paper presents a case study based on a real project to emphasize the benefits of adopting such a holistic perspective.
- 23 May 2023
- Published by Wiley in Structural Concrete
- Vol. 24 (4) , 4530-4548
Open AccessReliability‐ and sustainability‐driven strategies for the maintenance of existing structures
The management of existing structures is raising a number of pertinent questions to the owners and engineers. Many structures built more than 50 years ago (even those built hundreds of years ago) usually no longer comply with safety requirements of current codes, which are typically addressed in new structures. This is not necessarily only caused by a poor original design or degradation with time, but it may be, for example, the consequence of increase in actions, reducing the level of reliability of a structure. This paper focuses on strategies to be adopted for existing structures which do not comply with code requirements for new constructions (e.g., to repair, to demolish, to rebuild, etc.) on the basis of a more holistic approach that includes economic, social, and environmental considerations. To that aim, first, a brief review of the background concepts on the reliability of structures is presented, highlighting the differences for new and existing structures. Following this analysis, suitable values for the reliability index (including sustainability considerations) are proposed, as well as tailored maintenance strategies. Finally, the paper presents a case study based on a real project to emphasize the benefits of adopting such a holistic perspective.
- Open Access
- 8 March 2023
- Published by Wiley in Structural Concrete
- Vol. 24 (4) , 4565-4576
Database of shear tests for prestressed fibre reinforced concrete beams without vertical stirrups and comparison with code provisions
High‐performance fibre reinforced concrete represents a promising alternative to conventional reinforced concrete for the construction of prestressed precast girders for road bridges. Specifically, all shear reinforcement is replaced by the use of steel fibres, which leads to important savings from the material and economical perspectives. Therefore, reliable shear formulations are required for these specific cases. In an effort to evaluate the accuracy of code expressions, this paper presents a database collecting 80 experimental shear tests on prestressed fibre reinforced concrete beams without stirrups. After illustrating its main characteristics, this database is used to verify the conservativeness and accuracy of shear formulation according to several codes and recommendations: i) Model Code 2010, ii) draft version of Model Code 2020, iii) draft version of the new Eurocode 2, and iv) Spanish National Code. The evaluation, carried out through the calculation of the model safety factor, indicated that the application of all shear formulations is largely conservative, leading to less unsafe tests than the desired 5% fractile. The relation between model safety factors and mechanical parameters is then investigated. Finally, the results obtained for the developed database are compared with those achieved from two larger databases of beams with similar features but without prestress. The comparison clearly proves the greater conservatism of code expressions when beams are prestressed.
- 8 March 2023
- Published by Wiley in Structural Concrete
- Vol. 24 (4) , 4565-4576
Open AccessDatabase of shear tests for prestressed fibre reinforced concrete beams without vertical stirrups and comparison with code provisions
High‐performance fibre reinforced concrete represents a promising alternative to conventional reinforced concrete for the construction of prestressed precast girders for road bridges. Specifically, all shear reinforcement is replaced by the use of steel fibres, which leads to important savings from the material and economical perspectives. Therefore, reliable shear formulations are required for these specific cases. In an effort to evaluate the accuracy of code expressions, this paper presents a database collecting 80 experimental shear tests on prestressed fibre reinforced concrete beams without stirrups. After illustrating its main characteristics, this database is used to verify the conservativeness and accuracy of shear formulation according to several codes and recommendations: i) Model Code 2010, ii) draft version of Model Code 2020, iii) draft version of the new Eurocode 2, and iv) Spanish National Code. The evaluation, carried out through the calculation of the model safety factor, indicated that the application of all shear formulations is largely conservative, leading to less unsafe tests than the desired 5% fractile. The relation between model safety factors and mechanical parameters is then investigated. Finally, the results obtained for the developed database are compared with those achieved from two larger databases of beams with similar features but without prestress. The comparison clearly proves the greater conservatism of code expressions when beams are prestressed.
- Open Access
- 13 December 2022
- Published by Wiley in Structural Concrete
- Vol. 24 (2) , 1893-1913
Sustainability in construction: The urgent need for a new ethics
This paper introduces the key concepts of sustainability in the construction industry, together with a call for an urgent action to change the culture of all implied agents. The work presents an objective framework to evaluate sustainability through the analysis of the stages of the Integrated Life Cycle Assessment (ILCA). Such approach is applied to the global warming emissions indicator, and different aspects are investigated to support designers toward more sustainable designs. First, the principles for ILCA are introduced and sound values for the emissions of different structural materials are critically discussed and filtered taking into account the recently increased sensitivity to environmental aspects. On that basis, objective comparisons are presented for practical examples related to buildings and bridges. Specific design alternatives, based on the use of different materials and structural typologies, are also illustrated and compared to the original solution. The conclusions help the designer to identify which are the critical decisions leading to projects respectful of sustainability considerations. Specifically, material selection, structural efficiency, and a sound conceptual design are identified as the key aspects of sustainability.
- 13 December 2022
- Published by Wiley in Structural Concrete
- Vol. 24 (2) , 1893-1913
Open AccessSustainability in construction: The urgent need for a new ethics
This paper introduces the key concepts of sustainability in the construction industry, together with a call for an urgent action to change the culture of all implied agents. The work presents an objective framework to evaluate sustainability through the analysis of the stages of the Integrated Life Cycle Assessment (ILCA). Such approach is applied to the global warming emissions indicator, and different aspects are investigated to support designers toward more sustainable designs. First, the principles for ILCA are introduced and sound values for the emissions of different structural materials are critically discussed and filtered taking into account the recently increased sensitivity to environmental aspects. On that basis, objective comparisons are presented for practical examples related to buildings and bridges. Specific design alternatives, based on the use of different materials and structural typologies, are also illustrated and compared to the original solution. The conclusions help the designer to identify which are the critical decisions leading to projects respectful of sustainability considerations. Specifically, material selection, structural efficiency, and a sound conceptual design are identified as the key aspects of sustainability.
- 1 December 2021
- Published by International Association for Shell and Spatial Structures in Journal of the International Association for Shell and Spatial Structures
- Vol. 62 (4) , 249-254
EMINENT STRUCTURAL ENGINEER: EDUARDO TORROJA (1899-1961)
Torroja excelled as a designer, as a docent, as a code-maker and as a founder of technical associations. Nothing was conceded to improvisation. Every outcome of his thought was the mature fruit of deep reflections; of precise knowledge of the problem's formulation and its boundary conditions. Moreover, he did not stop thinking till he found not only one, but different possible alternatives.
- 1 December 2021
- Published by International Association for Shell and Spatial Structures in Journal of the International Association for Shell and Spatial Structures
- Vol. 62 (4) , 249-254
EMINENT STRUCTURAL ENGINEER: EDUARDO TORROJA (1899-1961)
Torroja excelled as a designer, as a docent, as a code-maker and as a founder of technical associations. Nothing was conceded to improvisation. Every outcome of his thought was the mature fruit of deep reflections; of precise knowledge of the problem's formulation and its boundary conditions. Moreover, he did not stop thinking till he found not only one, but different possible alternatives.
- 9 November 2021
- Published by Wiley in Structural Concrete
- Vol. 22 (6) , 3336-3352
A comparative study on the differential axial shortening in high‐rise buildings
- 9 November 2021
- Published by Wiley in Structural Concrete
- Vol. 22 (6) , 3336-3352
A comparative study on the differential axial shortening in high‐rise buildings
- 7 August 2021
- Published by Wiley in Structural Concrete
- Vol. 22 (5) , 3074-3093
Comparative study of geometrical properties and simplified preliminary design procedure for concrete arch bridges
This paper first presents a comprehensive database of 58 (specifically, 38 roadway and 20 railway) concrete arch bridges built in Spain during the last century. The collected information includes geometrical and mechanical data to define the main relations among different parameters and to identify specific trends. In addition, this information has been combined with data collected by other authors to compare results with other worldwide bridges with similar features. In summary, 112 concrete arch bridges covering a span range from 12 to 384 meters have been used to investigate relations of a variety of parameters such as flatness, arch and girder depths, bending stiffness, slenderness, effective slab thickness and dimensionless axial forces. Finally, based on this study, a data‐drive simplified procedure for the preliminary design of such bridges is proposed.
- 7 August 2021
- Published by Wiley in Structural Concrete
- Vol. 22 (5) , 3074-3093
Comparative study of geometrical properties and simplified preliminary design procedure for concrete arch bridges
This paper first presents a comprehensive database of 58 (specifically, 38 roadway and 20 railway) concrete arch bridges built in Spain during the last century. The collected information includes geometrical and mechanical data to define the main relations among different parameters and to identify specific trends. In addition, this information has been combined with data collected by other authors to compare results with other worldwide bridges with similar features. In summary, 112 concrete arch bridges covering a span range from 12 to 384 meters have been used to investigate relations of a variety of parameters such as flatness, arch and girder depths, bending stiffness, slenderness, effective slab thickness and dimensionless axial forces. Finally, based on this study, a data‐drive simplified procedure for the preliminary design of such bridges is proposed.
- Open Access
- 30 June 2021
- Published by Editorial CSIC in Informes de la Construcción
- Vol. 73 (562) , e390
Estudio de diferentes tipologías estructurales para el proyecto de edificios altos: criterios de predimensionamiento y aplicación a dos casos de estudio.
La elección del sistema estructural más adecuado para un edificio alto suele establecerse en base a unas tablas introducidas por Khan en los años 60 que identifican unas alturas límites asociadas a cada tipología estructural. Sin embargo, el desarrollo de los procedimientos constructivos y de los materiales ha hecho que las alturas para los cuales los sistemas son eficaces varíen, permitiendo que para algunos sistemas la altura límite se vea incrementada considerablemente. En este artículo se analiza la aplicación de diferentes tipologías (framed tube, shear wall, tube in tube, outriggers) al proyecto de edificios altos. Se establecen unos criterios de predimensionamiento para los diferentes sistemas. Se utilizan modelos paramétricos para comparar los diferentes sistemas aplicándolos a dos casos de estudio, un edificio de 240 y otro de 480 metros de altura. Los resultados muestran que algunas tipologías ofrecen ventajas en rangos de alturas mayores a los descritos por Khan.
- 30 June 2021
- Published by Editorial CSIC in Informes de la Construcción
- Vol. 73 (562) , e390
Open AccessEstudio de diferentes tipologías estructurales para el proyecto de edificios altos: criterios de predimensionamiento y aplicación a dos casos de estudio.
La elección del sistema estructural más adecuado para un edificio alto suele establecerse en base a unas tablas introducidas por Khan en los años 60 que identifican unas alturas límites asociadas a cada tipología estructural. Sin embargo, el desarrollo de los procedimientos constructivos y de los materiales ha hecho que las alturas para los cuales los sistemas son eficaces varíen, permitiendo que para algunos sistemas la altura límite se vea incrementada considerablemente. En este artículo se analiza la aplicación de diferentes tipologías (framed tube, shear wall, tube in tube, outriggers) al proyecto de edificios altos. Se establecen unos criterios de predimensionamiento para los diferentes sistemas. Se utilizan modelos paramétricos para comparar los diferentes sistemas aplicándolos a dos casos de estudio, un edificio de 240 y otro de 480 metros de altura. Los resultados muestran que algunas tipologías ofrecen ventajas en rangos de alturas mayores a los descritos por Khan.
- Open Access
- 21 June 2021
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 16 (2) , 151-177
Design Basis of Movable Scaffolding Systems Following American and European Code Provisions and Recommendations
Construction of bridges span-by-span with Movable Scaffolding Systems (MSSs) is a very efficient and competitive technology. Normally used for spans between 25 and 70m, the technology has allowed reaching longer spans due to technological advances, specifically in bridge construction equipment. Thereby, the use of MSS has become widespread and well-accepted in a large number of locations across the USA and Europe. Nevertheless, despite its extended application, there is no single specific code provision that can explain, control, and give recommendations about all aspects of MSS during its design and usage. On the contrary, the information is spread over several documents. This paper aims at bridging this gap by providing an extensive review of code provisions and recommendations that can be valid for the MSS design. Applicability of these documents is discussed by analysing loads, safety factors, load combinations, limit states, as well as structural analysis and design. After this, a proposal of a design basis for MSS is presented for each aspect mentioned following provisions and recommendations of the considered codes.
- 21 June 2021
- Published by Riga Technical University in The Baltic Journal of Road and Bridge Engineering
- Vol. 16 (2) , 151-177
Open AccessDesign Basis of Movable Scaffolding Systems Following American and European Code Provisions and Recommendations
Construction of bridges span-by-span with Movable Scaffolding Systems (MSSs) is a very efficient and competitive technology. Normally used for spans between 25 and 70m, the technology has allowed reaching longer spans due to technological advances, specifically in bridge construction equipment. Thereby, the use of MSS has become widespread and well-accepted in a large number of locations across the USA and Europe. Nevertheless, despite its extended application, there is no single specific code provision that can explain, control, and give recommendations about all aspects of MSS during its design and usage. On the contrary, the information is spread over several documents. This paper aims at bridging this gap by providing an extensive review of code provisions and recommendations that can be valid for the MSS design. Applicability of these documents is discussed by analysing loads, safety factors, load combinations, limit states, as well as structural analysis and design. After this, a proposal of a design basis for MSS is presented for each aspect mentioned following provisions and recommendations of the considered codes.