RRRafael Ruiz

Rafael Ruiz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rafael Ruiz has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Life Cycle Assessment of Geopolymer Precast Slab for the Road Pavements: A Comparative Study with a Conventional Concrete Precast Slab

    by Rabia Rashdi, Elisabete Teixeira, Joaquim Tinoco, Laura Piarulli Paz, Rafael Ruiz Maestre, Valle Chozas Ligero, Ricardo Mateus, José Matos

    Road infrastructure plays a vital role in supporting economic development, but it also generates significant environmental and social implications that must be carefully managed. Consequently, identifying sustainable alternatives to conventional concrete is critical in the development of the environmentally responsible road infrastructure. This study investigates geopolymer precast slabs made from activated fly ash (FA) and Ground Granulated Blast-furnace Slag (GGBS) as a substitute for conventional Ordinary Portland Cement (OPC) slabs. A life cycle assessment (LCA) was conducted on the slabs using the CML methodology in SimaPro with a ‘cradle-to-site’ approach. Results show that geopolymer slabs reduce CO 2 emissions by 44% per slab compared to conventional slabs, and by nearly 78% at the concrete level. While transportation of materials increases emissions relative to conventional slabs, the overall environmental impact of geopolymer slabs remains lower Despite this, geopolymer solutions offer advantages such as enhanced durability, chemical resistance, and lower water consumption, highlighting their potential as a sustainable alternative. Optimizing supply chains and using locally available precursors could further improve overall sustainability.

  • Open Access

    Marine Exposure Performance of a Circular-Concrete Floating Breakwater Prototype: Biofouling, Chloride Ingress and Structural Monitoring

    by Rafael Ruiz Maestre, Valle Chozas, Aurora María Casado, Balram Panjwani, Upeksha Chathurani Thibbotuwa, Andoni Irizar, Aitor Olaizola, Ainhoa Cortes

    Field evidence on the performance of circular concrete materials in floating marine structures remains limited. This study presents the design, manufacture and nine-month marine exposure of a reduced-scale floating breakwater prototype measuring 3.40 m × 1.70 m × 1.05 m at the Port of Gijón, Spain. The reinforced shell comprised high-performance concrete in the bottom slab and walls and lightweight aggregate concrete in the top slab, while the core combined cellular concrete with fully encapsulated expanded polystyrene required to satisfy the buoyancy constraints of the reduced-scale prototype. The structure was held in position by a four-line catenary mooring system connected to gravity anchors.Prototype performance was evaluated through biofouling surveys, embedded corrosion-potential measurements, chloride profiling, reinforcement inspection, eddy-current corrosion sensing and acceleration monitoring. Biofouling coverage exceeded 85% on all evaluated surfaces, with mussel-dominated layers up to 35 mm thick. Wet biomass on the two sampled lateral faces ranged from 6.3 to 9.7 kg/m². Highly negative reinforcement potentials at permanently submerged locations were consistent with water-saturated, oxygen-limited concrete and did not, in isolation, demonstrate active corrosion. Chloride content exceeded the applicable 0.6% code limit at reinforcement depth only in the lightweight-concrete top slab near openings introduced for monitoring equipment. Possible localised pitting was observed in this area, but no measurable reduction in reinforcement thickness was detected.Environmental compensation reduced the variability of the eddy-current baseline to a ±135 Ω reference band during the analysed period, although field detection of active corrosion was not demonstrated. Dominant measured frequencies of 0.35–0.45 Hz were broadly consistent, within the estimated ±20% uncertainty, with the calculated rigid-body natural-frequency range, particularly the heave and pitch estimates.The campaign demonstrated satisfactory short-term marine performance of the prototype and identified instrumentation openings as the most critical durability details. The results also provide field evidence on biological colonisation, chloride ingress and sensor operation in a floating circular-concrete structure. Longer exposure under open-sea conditions is required to assess lifecycle durability, corrosion development and the long-term effects of biofouling on hydrodynamic response and mooring loads.

  • Open Access

    Durability performance of a high‐performance fiber‐reinforced concrete for bridge applications

    by Rolando Baldiviezo, Rafael Ruiz, Borja Regúlez, Carmen Andrade, Hugo Corres, Valle Chozas‐Ligero, Leonardo Todisco

    This paper investigates the durability performance of a coarse‐aggregate high‐performance fiber‐reinforced concrete (HPFRC) developed as a cost‐efficient material solution for precast bridge applications. A comprehensive experimental program was conducted to assess the resistance of the material to the principal deterioration mechanisms governing the service life of concrete structures, namely chloride ingress, carbonation, and steel fiber corrosion. The experimental campaign comprised non‐steady‐state chloride migration tests, surface electrical resistivity and water absorption measurements, long‐term natural carbonation exposure, and electrochemical corrosion monitoring by linear polarization resistance and electrochemical impedance spectroscopy. The results demonstrate an outstanding durability performance of the developed HPFRC, with very low chloride migration coefficients, no detectable carbonation front after 40 months of natural exposure, and fiber corrosion confined to a thin superficial sacrificial layer without inducing cracking or spalling of the surrounding matrix. The incorporation of fibers was shown not to adversely affect the intrinsic impermeability of the cementitious matrix. The experimentally derived durability parameters were subsequently implemented in probabilistic service‐life prediction models in accordance with fib Model Code 2020 provisions for chloride‐ and carbonation‐induced corrosion. A Monte Carlo reliability analysis was performed adopting a 7% probability of failure as the service‐life limit state. The results indicate that the predicted service life of HPFRC largely exceeds that of conventional and slag‐based concretes under comparable exposure conditions and remains well beyond standard design requirements, supporting its applicability in durable and low‐maintenance bridge structures.

  • Open Access

    Shear resistance of prestressed high‐performance fiber reinforced concrete beams without stirrups: Experimental evidence and comparison with EN 1992‐1‐1:2023 provisions

    by Matteo Lamberti, Leonardo Todisco, Rafael Ruiz, Miguel Fernández Ruiz, Fausto Minelli, Hugo Corres

    The combined use of high‐performance fiber reinforced concrete (HPFRC) and prestressing systems in bridge construction offers significant advantages, including material and cost savings, as well as enhanced durability. However, the shear behavior of such elements remains still a topic of scientific debate. To advance understanding of this critical aspect, this paper presents the results of an experimental investigation conducted on eight full‐scale HPFRC beams without stirrups and with varying levels of prestressing. The experimental shear resistance is compared with predictions from EN1992‐1‐1:2023 (EC2:2023) to assess its accuracy. The results show that the EC2:2023 provisions are highly conservative, especially for beams with higher levels of prestressing, significantly underestimating the shear resistance. To further evaluate the accuracy of the EC2:2023 model, it is also compared with the experimental results collected from an extended database of shear tests on prestressed FRC beams without stirrups. Safety margin calculations demonstrate that the EC2:2023 shear formulation leads to few unsafe results, but with excessive conservatism (increasing for higher values of the prestress level). Notably, for some specimens, the predicted shear capacity is even lower than that of the same beam when fiber contributions are not considered. Finally, a similar analysis is performed with Level of Approximation II and III of Model Code 2020 (MC2020) showing a significant improvement on the shear resistance predictions.


  • Open Access

    Experimental characterization of a cost‐competitive tailor‐made HPFRC mix design for wide application in precast girder of roadway bridges

    by Rafael Ruiz, Valle Chozas‐Ligero, Leonardo Todisco, J. David Jimenez‐Vicaria, Hugo Corres

    This paper presents a comprehensive study on the development of a cost‐effective, high‐performance fiber reinforced concrete (HPFRC) for the construction of a 60 m‐span U‐girder roadway bridge without stirrups in the webs, meeting the design requirements of fck ≥ 100 MPa and the post‐cracking flexural strength fR3k ≈ 8–10 MPa. The main objective of this research is to develop a F5 workability class HPFRC that meets the specified design criteria without exceeding 2.5–3.0 times the cost of a C70/85. To achieve this goal, the concrete mix was obtained using 500 kg/m3 of cement and 50 kg/m3 of silica fume. This mix was investigated with nine different combinations of fibers and fiber contents, resulting that 80 kg/m3 of 4D‐fibers (lf = 60 mm) provided the optimal fR3k without compromising workability and cost. Subsequently, an extensive experimental campaign was conducted to cast the U‐girder following the conventional casting techniques involving casting prismatic samples, L‐shaped and rectangular‐shaped panels to represent different parts of the U‐girder. Innovative techniques were used to study the effect of different waiting times between concrete pours. Results from the testing of the prismatic specimens evidenced the need of stitching by means of a poker vibrator planes between successive concrete layers. Furthermore, the study of the panels evidenced that a waiting time of 90 min allows the HPFRC to achieve enough bending and compressive strength to bear internal vibration of the element without liquefying and, at the same time, avoiding cold joints. The results confirm the applicability of the developed HPFRC for the structural element under study following conventional casting techniques.


  • Open Access

    Application of high‐performance fibre reinforced concrete to precast girders for road bridges: Conceptual considerations and numerical analyses

    by Rafael Ruiz, Leonardo Todisco, Hugo Corres

    High‐performance fiber‐reinforced concrete (HPFRC) can be considered a promising material for the construction of precast concrete girders for road bridges. This paper presents conceptual considerations and numerical analysis to support this statement. The HPFRC is a compromised alternative between FRC and UHPFRC mixes. Specifically, a tailor‐made mix design of HPFRC jointly developed by ACCIONA and the authors is presented, and then compared with the other types of fiber‐reinforced concretes collected from the technical literature. In addition, some trends observed in the database are described. This material characterization is followed by a conceptual analysis of the advantages of the application of HPFRC to road bridges. Specifically, a proposed bridge for the case of a 60 m‐span box girder is analyzed. A comparison between alternatives based on the use of HPFRC and conventional reinforced concrete is discussed. The results shed light on the viability of this material for bridge application. Specifically, the main finding show potential significant material savings in structural elements of the superstructure. Finally, ongoing and future research for a wide application to the construction sector are briefly discussed.


  • Open Access

    Parametric analysis of variables influencing the design of I‐girder bridge decks made of high‐performance fiber reinforced concrete

    by Rafael Ruiz, Gian Biagio Starchevich, Leonardo Todisco, Hugo Corres

    Despite the good balance between notable mechanical properties and a reasonable cost, high‐performance fiber reinforced concrete (HPFRC) is not widely employed in the construction of bridges. This work is part of a larger research addressed at exploring the potential of this material for replacing standard concrete in the construction sector. Specifically, this paper focuses on the use of HPFRC to build precast simply supported I‐girders for road bridges. This work investigates the influence of several design variables on the material consumption to identify the key features that can lead to possible material savings. The variables, explored through a parametric analysis, are: (i) the concrete class (C80/95, C100/115, and C120/140); (ii) the number of beams to form the deck (from 3 to 5); (iii) the girder span‐to‐depth ratio (17, 20, and 23); (iv) the bridge span (L) (20, 40 and 60 m). One specific case of study is described in detail, and then the same procedure is applied to all the case studies. In addition, the effect of different hypotheses and formulations for the bending and shear verifications are analyzed. The results shed light on the relevance that these variables play in the final solution and how they affect the dimensioning of these elements. As main finding, this work proves that the use of HPFRC represent a material‐efficient solution for slender and long‐span precast I‐girders.