Leonardo Todisco
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Leonardo Todisco has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Javier León
Department of Continuum Mechanics and Structures, ETS de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid, Madrid, Spain
11 shared publications - Hugo Corres
Universidad Politécnica de Madrid
9 shared publications - Rafael Ruiz
Laboratorio de Estructuras Universidad Politécnica de Madrid, E.T.S. Ingenieros de Caminos, Canales y Puertos Madrid Spain
7 shared publications - Benedetta Orfeo
Department of Continuum Mechanics and Structures, ETS de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid, Madrid, Spain
6 shared publications - Miguel Fernández Ruiz
Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos Universidad Politécnica de Madrid Madrid Spain
6 shared publications Hugo Corres
E.T.S. Ingenieros de Caminos, Canales y Puertos, Laboratorio de Estructuras Universidad Politécnica de Madrid Madrid Spain
5 shared publications
Latest Publications
- Open Access
- 9 June 2026
- Published by Wiley in Structural Concrete
Mechanical, rheological, and durability performances of GGBS ‐based concrete for potential application to prestressed structures
Ground granulated blast‐furnace slag (GGBS) is a widely used clinker substitute in concrete, recognized for its potential to significantly reduce environmental impacts. However, its application in prestressed concrete remains limited in several countries, mainly due to concerns regarding early‐age mechanical performance and long‐term durability. This study addresses this gap by specifically evaluating the feasibility of high‐GGBS concretes for prestressed structural applications through an integrated assessment of mechanical, rheological, and durability properties. The novelty of this work lies in: (i) its explicit focus on concretes suitable for prestressed elements and (ii) the combined evaluation of mechanical performance and durability‐related properties within a unified experimental framework representative of current construction practice. This experimental evidence is essential for supporting the revision of existing guidelines and standards, enabling the safe adoption of high‐GGBS concretes in prestressed structural elements and expanding their use in more sustainable infrastructure. The study involves the experimental characterization of eight mixtures, incorporating GGBS cements with a slag content ranging from 39% to 70% (classified as CEM III/A and /B according to EN 197‐1) and compressive strengths between 30 and 45 MPa, thereby providing insights relevant to both reinforced and prestressed concrete applications, using commercially available cements and concrete mix designs representative of current construction practice. The results demonstrate that GGBS concretes meet the early‐age strength requirements for prestressed applications and exhibit superior long‐term performance compared with traditional Portland cement. In present tests, no evidence of corrosion initiation attributable to the sulfides provided by the material was observed under the testing conditions despite the relatively high concentration of them in the slags. High GGBS contents enhance resistance to chloride penetration, water absorption, and electrical resistivity. However, the increased carbonation rates found necessitate careful consideration in environments prone to carbonation‐induced degradation. These findings highlight the potential of GGBS‐based concretes as viable materials for prestressed structures, particularly in applications prioritizing sustainability and resistance to chloride‐rich exposures.
- 9 June 2026
- Published by Wiley in Structural Concrete
Open AccessMechanical, rheological, and durability performances of GGBS ‐based concrete for potential application to prestressed structures
Ground granulated blast‐furnace slag (GGBS) is a widely used clinker substitute in concrete, recognized for its potential to significantly reduce environmental impacts. However, its application in prestressed concrete remains limited in several countries, mainly due to concerns regarding early‐age mechanical performance and long‐term durability. This study addresses this gap by specifically evaluating the feasibility of high‐GGBS concretes for prestressed structural applications through an integrated assessment of mechanical, rheological, and durability properties. The novelty of this work lies in: (i) its explicit focus on concretes suitable for prestressed elements and (ii) the combined evaluation of mechanical performance and durability‐related properties within a unified experimental framework representative of current construction practice. This experimental evidence is essential for supporting the revision of existing guidelines and standards, enabling the safe adoption of high‐GGBS concretes in prestressed structural elements and expanding their use in more sustainable infrastructure. The study involves the experimental characterization of eight mixtures, incorporating GGBS cements with a slag content ranging from 39% to 70% (classified as CEM III/A and /B according to EN 197‐1) and compressive strengths between 30 and 45 MPa, thereby providing insights relevant to both reinforced and prestressed concrete applications, using commercially available cements and concrete mix designs representative of current construction practice. The results demonstrate that GGBS concretes meet the early‐age strength requirements for prestressed applications and exhibit superior long‐term performance compared with traditional Portland cement. In present tests, no evidence of corrosion initiation attributable to the sulfides provided by the material was observed under the testing conditions despite the relatively high concentration of them in the slags. High GGBS contents enhance resistance to chloride penetration, water absorption, and electrical resistivity. However, the increased carbonation rates found necessitate careful consideration in environments prone to carbonation‐induced degradation. These findings highlight the potential of GGBS‐based concretes as viable materials for prestressed structures, particularly in applications prioritizing sustainability and resistance to chloride‐rich exposures.
- Open Access
- 8 June 2026
- Published by Wiley in Structural Concrete
- Vol. 27 (5) , 7667-7679
Durability performance of a high‐performance fiber‐reinforced concrete for bridge applications
This paper investigates the durability performance of a coarse‐aggregate high‐performance fiber‐reinforced concrete (HPFRC) developed as a cost‐efficient material solution for precast bridge applications. A comprehensive experimental program was conducted to assess the resistance of the material to the principal deterioration mechanisms governing the service life of concrete structures, namely chloride ingress, carbonation, and steel fiber corrosion. The experimental campaign comprised non‐steady‐state chloride migration tests, surface electrical resistivity and water absorption measurements, long‐term natural carbonation exposure, and electrochemical corrosion monitoring by linear polarization resistance and electrochemical impedance spectroscopy. The results demonstrate an outstanding durability performance of the developed HPFRC, with very low chloride migration coefficients, no detectable carbonation front after 40 months of natural exposure, and fiber corrosion confined to a thin superficial sacrificial layer without inducing cracking or spalling of the surrounding matrix. The incorporation of fibers was shown not to adversely affect the intrinsic impermeability of the cementitious matrix. The experimentally derived durability parameters were subsequently implemented in probabilistic service‐life prediction models in accordance with fib Model Code 2020 provisions for chloride‐ and carbonation‐induced corrosion. A Monte Carlo reliability analysis was performed adopting a 7% probability of failure as the service‐life limit state. The results indicate that the predicted service life of HPFRC largely exceeds that of conventional and slag‐based concretes under comparable exposure conditions and remains well beyond standard design requirements, supporting its applicability in durable and low‐maintenance bridge structures.
- 8 June 2026
- Published by Wiley in Structural Concrete
- Vol. 27 (5) , 7667-7679
Open AccessDurability performance of a high‐performance fiber‐reinforced concrete for bridge applications
This paper investigates the durability performance of a coarse‐aggregate high‐performance fiber‐reinforced concrete (HPFRC) developed as a cost‐efficient material solution for precast bridge applications. A comprehensive experimental program was conducted to assess the resistance of the material to the principal deterioration mechanisms governing the service life of concrete structures, namely chloride ingress, carbonation, and steel fiber corrosion. The experimental campaign comprised non‐steady‐state chloride migration tests, surface electrical resistivity and water absorption measurements, long‐term natural carbonation exposure, and electrochemical corrosion monitoring by linear polarization resistance and electrochemical impedance spectroscopy. The results demonstrate an outstanding durability performance of the developed HPFRC, with very low chloride migration coefficients, no detectable carbonation front after 40 months of natural exposure, and fiber corrosion confined to a thin superficial sacrificial layer without inducing cracking or spalling of the surrounding matrix. The incorporation of fibers was shown not to adversely affect the intrinsic impermeability of the cementitious matrix. The experimentally derived durability parameters were subsequently implemented in probabilistic service‐life prediction models in accordance with fib Model Code 2020 provisions for chloride‐ and carbonation‐induced corrosion. A Monte Carlo reliability analysis was performed adopting a 7% probability of failure as the service‐life limit state. The results indicate that the predicted service life of HPFRC largely exceeds that of conventional and slag‐based concretes under comparable exposure conditions and remains well beyond standard design requirements, supporting its applicability in durable and low‐maintenance bridge structures.
- Open Access
- 14 May 2026
- Published by Wiley in Structural Concrete
- Vol. 27 (5) , 7509-7533
Exploring the potential of Textile Reinforced Concrete for corrosion‐insensitive retaining walls
In a context where durability concerns, particularly the corrosion of steel reinforcement, remain a critical challenge for conventional reinforced concrete structures under severe exposure, Textile Reinforced Concrete (TRC) is emerging as a promising alternative. TRC combines a cementitious matrix with non‐corrosive textile reinforcement, enabling thinner, lighter, and more durable structures. This paper investigates the application of TRC to structures where corrosion concerns are critical and focuses on retaining walls, a structural typology particularly sensitive to this phenomenon. A Life Cycle Assessment is conducted to evaluate the potential environmental benefits of TRC‐based solutions compared with conventional alternatives. In addition, the response of a prototype wall (intended to represent at half scale the base of a 5 m‐high segmental retaining wall) is experimentally investigated, validating the design concept and its building feasibility. The cross section of the prototype is designed to optimize the amount of material used, by arrangement of counterforts. The experimental results show that shear failure in the counterforts is governing and that Elastic‐Cracked Stress Fields are a suitable tool for their design. Based on these findings, a series of practical recommendations for the development and application of TRC in retaining structures is proposed.
- 14 May 2026
- Published by Wiley in Structural Concrete
- Vol. 27 (5) , 7509-7533
Open AccessExploring the potential of Textile Reinforced Concrete for corrosion‐insensitive retaining walls
In a context where durability concerns, particularly the corrosion of steel reinforcement, remain a critical challenge for conventional reinforced concrete structures under severe exposure, Textile Reinforced Concrete (TRC) is emerging as a promising alternative. TRC combines a cementitious matrix with non‐corrosive textile reinforcement, enabling thinner, lighter, and more durable structures. This paper investigates the application of TRC to structures where corrosion concerns are critical and focuses on retaining walls, a structural typology particularly sensitive to this phenomenon. A Life Cycle Assessment is conducted to evaluate the potential environmental benefits of TRC‐based solutions compared with conventional alternatives. In addition, the response of a prototype wall (intended to represent at half scale the base of a 5 m‐high segmental retaining wall) is experimentally investigated, validating the design concept and its building feasibility. The cross section of the prototype is designed to optimize the amount of material used, by arrangement of counterforts. The experimental results show that shear failure in the counterforts is governing and that Elastic‐Cracked Stress Fields are a suitable tool for their design. Based on these findings, a series of practical recommendations for the development and application of TRC in retaining structures is proposed.
- Open Access
- 6 August 2025
- Published by Wiley in Structural Concrete
- Vol. 26 (5) , 6249-6273
Shear resistance of prestressed high‐performance fiber reinforced concrete beams without stirrups: Experimental evidence and comparison with EN 1992‐1‐1:2023 provisions
The combined use of high‐performance fiber reinforced concrete (HPFRC) and prestressing systems in bridge construction offers significant advantages, including material and cost savings, as well as enhanced durability. However, the shear behavior of such elements remains still a topic of scientific debate. To advance understanding of this critical aspect, this paper presents the results of an experimental investigation conducted on eight full‐scale HPFRC beams without stirrups and with varying levels of prestressing. The experimental shear resistance is compared with predictions from EN1992‐1‐1:2023 (EC2:2023) to assess its accuracy. The results show that the EC2:2023 provisions are highly conservative, especially for beams with higher levels of prestressing, significantly underestimating the shear resistance. To further evaluate the accuracy of the EC2:2023 model, it is also compared with the experimental results collected from an extended database of shear tests on prestressed FRC beams without stirrups. Safety margin calculations demonstrate that the EC2:2023 shear formulation leads to few unsafe results, but with excessive conservatism (increasing for higher values of the prestress level). Notably, for some specimens, the predicted shear capacity is even lower than that of the same beam when fiber contributions are not considered. Finally, a similar analysis is performed with Level of Approximation II and III of Model Code 2020 (MC2020) showing a significant improvement on the shear resistance predictions.
- 6 August 2025
- Published by Wiley in Structural Concrete
- Vol. 26 (5) , 6249-6273
Open AccessShear resistance of prestressed high‐performance fiber reinforced concrete beams without stirrups: Experimental evidence and comparison with EN 1992‐1‐1:2023 provisions
The combined use of high‐performance fiber reinforced concrete (HPFRC) and prestressing systems in bridge construction offers significant advantages, including material and cost savings, as well as enhanced durability. However, the shear behavior of such elements remains still a topic of scientific debate. To advance understanding of this critical aspect, this paper presents the results of an experimental investigation conducted on eight full‐scale HPFRC beams without stirrups and with varying levels of prestressing. The experimental shear resistance is compared with predictions from EN1992‐1‐1:2023 (EC2:2023) to assess its accuracy. The results show that the EC2:2023 provisions are highly conservative, especially for beams with higher levels of prestressing, significantly underestimating the shear resistance. To further evaluate the accuracy of the EC2:2023 model, it is also compared with the experimental results collected from an extended database of shear tests on prestressed FRC beams without stirrups. Safety margin calculations demonstrate that the EC2:2023 shear formulation leads to few unsafe results, but with excessive conservatism (increasing for higher values of the prestress level). Notably, for some specimens, the predicted shear capacity is even lower than that of the same beam when fiber contributions are not considered. Finally, a similar analysis is performed with Level of Approximation II and III of Model Code 2020 (MC2020) showing a significant improvement on the shear resistance predictions.
- Open Access
- 21 July 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 1184-1204
CORR ‐ DATA : A database of corrosion parameters measured on existing reinforced concrete structures for enhanced structural assessment
The corrosion of reinforcing bars embedded in concrete strongly compromises structural performance over time. However, its detection and quantification remain challenging due to limited comprehensive knowledge of natural corrosion patterns in existing structures. This paper introduces CORR‐DATA, a database established to collect, categorize, and analyze consistent and comparable data from reinforcing bars extracted from naturally corroded structures. The database is intended to support the prediction of corrosion‐induced deterioration in structures exposed to similar environmental conditions and to enable a more accurate estimation of their residual properties. The paper outlines the included parameters and their associated collection methodologies, and discusses critical aspects of corrosion data evaluation, such as oxide removal procedures, elongation capacity measurements, chloride content interpretation, and the definition of the maximum‐to‐average attack ratio. In the latter aspect, the corrosion pattern on a few samples of naturally corroded bars subjected to chloride‐induced corrosion is analyzed in detail, highlighting key challenges in defining and identifying the minimum residual cross‐section.
- 21 July 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 1184-1204
Open AccessCORR ‐ DATA : A database of corrosion parameters measured on existing reinforced concrete structures for enhanced structural assessment
The corrosion of reinforcing bars embedded in concrete strongly compromises structural performance over time. However, its detection and quantification remain challenging due to limited comprehensive knowledge of natural corrosion patterns in existing structures. This paper introduces CORR‐DATA, a database established to collect, categorize, and analyze consistent and comparable data from reinforcing bars extracted from naturally corroded structures. The database is intended to support the prediction of corrosion‐induced deterioration in structures exposed to similar environmental conditions and to enable a more accurate estimation of their residual properties. The paper outlines the included parameters and their associated collection methodologies, and discusses critical aspects of corrosion data evaluation, such as oxide removal procedures, elongation capacity measurements, chloride content interpretation, and the definition of the maximum‐to‐average attack ratio. In the latter aspect, the corrosion pattern on a few samples of naturally corroded bars subjected to chloride‐induced corrosion is analyzed in detail, highlighting key challenges in defining and identifying the minimum residual cross‐section.
- Open Access
- 11 July 2025
- Published by CINTER in Hormigón y Acero
Critical Discussion on the Performance of Underslung Movable Scaffolding Systems Strengthened With an Active Prestressing System
The use of Movable Scaffolding Systems (MSSs) has proven to be an efficient and competitive construction method for in-situ prestressed concrete bridge decks. Among them, underslung MSSs are commonly used for spans up to 60 m, but the integration of active external prestressing systems has recently enabled their application to spans of up to 70 m. However, the effectiveness of these active systems is highly dependent on several design situations, and their benefits are not uniformly applicable across all construction stages. This paper examines the design optimization of MSSs with and without active prestressing system, evaluating their structural and economic implications. A detailed comparison is provided to assess the practical advantages and limitations of active prestressing systems, considering key influencing factors such as the construction sequence and operational constraints. Finally, the paper offers insights into the advantages and drawbacks of these systems in various bridge construction contexts.
- 11 July 2025
- Published by CINTER in Hormigón y Acero
Open AccessCritical Discussion on the Performance of Underslung Movable Scaffolding Systems Strengthened With an Active Prestressing System
The use of Movable Scaffolding Systems (MSSs) has proven to be an efficient and competitive construction method for in-situ prestressed concrete bridge decks. Among them, underslung MSSs are commonly used for spans up to 60 m, but the integration of active external prestressing systems has recently enabled their application to spans of up to 70 m. However, the effectiveness of these active systems is highly dependent on several design situations, and their benefits are not uniformly applicable across all construction stages. This paper examines the design optimization of MSSs with and without active prestressing system, evaluating their structural and economic implications. A detailed comparison is provided to assess the practical advantages and limitations of active prestressing systems, considering key influencing factors such as the construction sequence and operational constraints. Finally, the paper offers insights into the advantages and drawbacks of these systems in various bridge construction contexts.
- Open Access
- 29 June 2025
- Published by Wiley in Structural Concrete
- Vol. 26 (5) , 6203-6228
Tensile response of textile reinforced concrete incorporating synthetic fibres
Textile Reinforced Concrete (TRC) is a composite material where a textile fabric (typically in carbon) is embedded within a cementitious matrix. This material has emerged as a promising alternative to conventional reinforced concrete, allowing for the construction of light and durable structures with a limited impact in terms of CO 2 ‐eq footprint. The response of TRC in tension is, however, characterized by a brittle response, limiting its potential to redistribute internal forces and penalizing the overall structural performance. To enhance the behaviour of TRC, this research explores its combination with synthetic (polyolefin) fibres. The aim is to investigate the potential benefits in terms of cracking, control of delamination (namely in overlap regions of the fabric), and enhancement of the postpeak toughness. The paper presents a comprehensive experimental programme aimed at characterizing the material response of its components, the bond between the fabrics and the matrix, as well as the composite behaviour of TRC. The experimental results are interpreted and related to various physical parameters, such as the level of undulation of the fabric or the amount of fibres used. On that basis, a simple approach for design is proposed, accounting for the potential delamination of tension ties, as well as several practical conclusions.
- 29 June 2025
- Published by Wiley in Structural Concrete
- Vol. 26 (5) , 6203-6228
Open AccessTensile response of textile reinforced concrete incorporating synthetic fibres
Textile Reinforced Concrete (TRC) is a composite material where a textile fabric (typically in carbon) is embedded within a cementitious matrix. This material has emerged as a promising alternative to conventional reinforced concrete, allowing for the construction of light and durable structures with a limited impact in terms of CO 2 ‐eq footprint. The response of TRC in tension is, however, characterized by a brittle response, limiting its potential to redistribute internal forces and penalizing the overall structural performance. To enhance the behaviour of TRC, this research explores its combination with synthetic (polyolefin) fibres. The aim is to investigate the potential benefits in terms of cracking, control of delamination (namely in overlap regions of the fabric), and enhancement of the postpeak toughness. The paper presents a comprehensive experimental programme aimed at characterizing the material response of its components, the bond between the fabrics and the matrix, as well as the composite behaviour of TRC. The experimental results are interpreted and related to various physical parameters, such as the level of undulation of the fabric or the amount of fibres used. On that basis, a simple approach for design is proposed, accounting for the potential delamination of tension ties, as well as several practical conclusions.
- 29 April 2025
- Published by Elsevier in Structures
- Vol. 76
Design, construction and testing of post-tensioned stone arch footbridges
- 29 April 2025
- Published by Elsevier in Structures
- Vol. 76
Design, construction and testing of post-tensioned stone arch footbridges
- 1 April 2025
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Bridge Engineering
- Vol. 178 (2) , 171-184
Design of stone masonry bridges in European treatises: part 1 – geometrical configuration
Stone and brick masonry bridges represent a significant portion of existing in-service bridges in Europe. A thorough understanding of their design and construction is essential to appropriately assessing, maintaining, rehabilitating and preserving these valuable structures. Unfortunately, the relevant literature is fragmented and incomplete, leaving masonry bridges orphaned of doctrine and of treatment in modern codes. Based on a comprehensive review of some European treatises, especially Spanish and French ones, published in the sixteenth through to the nineteenth centuries, this paper begins to mend the knowledge gap by summarising the configuration of geometrical bridges and the materials employed in their construction. Moreover, the initial steps of the design are illustrated, as an introduction for the second part of this two-part publication, relating to the construction process of masonry bridges.
- 1 April 2025
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Bridge Engineering
- Vol. 178 (2) , 171-184
Design of stone masonry bridges in European treatises: part 1 – geometrical configuration
Stone and brick masonry bridges represent a significant portion of existing in-service bridges in Europe. A thorough understanding of their design and construction is essential to appropriately assessing, maintaining, rehabilitating and preserving these valuable structures. Unfortunately, the relevant literature is fragmented and incomplete, leaving masonry bridges orphaned of doctrine and of treatment in modern codes. Based on a comprehensive review of some European treatises, especially Spanish and French ones, published in the sixteenth through to the nineteenth centuries, this paper begins to mend the knowledge gap by summarising the configuration of geometrical bridges and the materials employed in their construction. Moreover, the initial steps of the design are illustrated, as an introduction for the second part of this two-part publication, relating to the construction process of masonry bridges.