Sreedharan Christopher Ezhil Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sreedharan Christopher Ezhil Singh has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Sivaraj Murugan
Department of Mechanical Engineering, Institute of Technology, Hawassa University, Hawassa, Ethiopia
4 shared publications C. Sankar
Department of Mechanical Engineering, PSN College of Engineering and Technology, Tirunelveli, Tirunelveli, Tamilnadu, 627152, INDIA
2 shared publicationsD. Rajeev
Department of Mechanical Engineering Mar Ephram College of Engineering and Technology Marthandam Kanyakumari Tamilnadu India
2 shared publications- A. Kajavali
Department of Mechanical Engineering, Government College of Engineering, Bargur, India
1 shared publication - B. Lakshmipathy
Annamalai University
1 shared publication C. Fradaric John
1 shared publication
Latest Publications
- Open Access
- 31 January 2026
- Published by Premier Science in Premier Journal of Science
- Vol. 15 (1)
AI-Driven Robotics has Optimized Motion Control, Decision-Making, and Real-Time Adaptability in Minimally Invasive Surgeries: A Systematic Review
Artificial intelligence (AI) and robotics have transformed patient treatment, diagnosis, surgical intervention, and the health industry. Robotic-assisted devices enhance procedural success, minimize recovery times, and maximize surgical precision. Motion control, decision-making, and real-time responsiveness in minimally invasive surgery have all been enhanced by the application of AI-based automation. Teleoperated robotic devices have enhanced access to specialist medical information through remote operation and expanded access to healthcare. In addition to these innovations, exorbitant costs, training, ethics, and cybersecurity issues continue to hamper developers from mass applications. These concerns must be addressed to ensure the safe, effective, and ethical use of robotic healthcare systems. To improve surgical performance, future research should focus on creating affordable alternatives, improving robotic dexterity, and integrating AI-based decision support. Robotic healthcare technologies will revolutionize healthcare delivery worldwide with future developments, improving the precision, accessibility, and efficiency of advanced medical interventions in the future.
- 31 January 2026
- Published by Premier Science in Premier Journal of Science
- Vol. 15 (1)
Open AccessAI-Driven Robotics has Optimized Motion Control, Decision-Making, and Real-Time Adaptability in Minimally Invasive Surgeries: A Systematic Review
Artificial intelligence (AI) and robotics have transformed patient treatment, diagnosis, surgical intervention, and the health industry. Robotic-assisted devices enhance procedural success, minimize recovery times, and maximize surgical precision. Motion control, decision-making, and real-time responsiveness in minimally invasive surgery have all been enhanced by the application of AI-based automation. Teleoperated robotic devices have enhanced access to specialist medical information through remote operation and expanded access to healthcare. In addition to these innovations, exorbitant costs, training, ethics, and cybersecurity issues continue to hamper developers from mass applications. These concerns must be addressed to ensure the safe, effective, and ethical use of robotic healthcare systems. To improve surgical performance, future research should focus on creating affordable alternatives, improving robotic dexterity, and integrating AI-based decision support. Robotic healthcare technologies will revolutionize healthcare delivery worldwide with future developments, improving the precision, accessibility, and efficiency of advanced medical interventions in the future.
- Open Access
- 3 July 2024
- Published by Taylor & Francis in Automatika
- Vol. 65 (4) , 1325-1338
Data augmentation using a 1D-CNN model with MFCC/MFMC features for speech emotion recognition
- 3 July 2024
- Published by Taylor & Francis in Automatika
- Vol. 65 (4) , 1325-1338
Open AccessData augmentation using a 1D-CNN model with MFCC/MFMC features for speech emotion recognition
- Open Access
- 1 January 2023
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2023 (1)
Artificial Neural Network on Tool Condition Monitoring in Hard Turning of AISI4140 Steel Using Carbide Tool
Hard turning has replaced conventional grinding in production processes in recent years as an emerging technique. Nowadays, coated carbide tools are replacing expensive CBN inserts in turning. Wear is a significant concern when turning with coated carbide; it immediately affects the acceptability of the machined surface, which causes machine downtime and loss due to wastage in machined parts. Online tool condition monitoring (TCM) is required to prevent such critical conditions. Hard turning differs from conventional turning in energy balance during metal cutting, resulting in greater thrust force; hence, the TCM model presented for conventional turning may not be suitable for hard turning. Hence, tool wear prediction for turning is projected based on thrust force using an artificial neural network (ANN). All of the tests were done using a design of experiments called full factorial design (FFD). The specimens were made of AISI 4140 steel that had been hardened to 47 HRC, and the inserts were made of coated carbide. The most impactful input features for wear, selected based on experimental outputs, were given to the neural network and trained. Tool wear is an estimated output from the training set that has been validated with satisfactory results for random conditions. The 5–10–1 network structure with the Levenberg–Marquardt (LM) learning algorithm, R2 values of 0.996602 and 0.969437 for the training and testing data, and mean square error values of 0.000133152 and 0.004443 for the training and testing data, respectively, gave the best results. The MEP values of 0.575407 and 2.977617 are very low (5%). The LM learning algorithm‐based ANN is good at predicting tool wear based on how well it predicts tool wear for both the testing set and the training set.
- 1 January 2023
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2023 (1)
Open AccessArtificial Neural Network on Tool Condition Monitoring in Hard Turning of AISI4140 Steel Using Carbide Tool
Hard turning has replaced conventional grinding in production processes in recent years as an emerging technique. Nowadays, coated carbide tools are replacing expensive CBN inserts in turning. Wear is a significant concern when turning with coated carbide; it immediately affects the acceptability of the machined surface, which causes machine downtime and loss due to wastage in machined parts. Online tool condition monitoring (TCM) is required to prevent such critical conditions. Hard turning differs from conventional turning in energy balance during metal cutting, resulting in greater thrust force; hence, the TCM model presented for conventional turning may not be suitable for hard turning. Hence, tool wear prediction for turning is projected based on thrust force using an artificial neural network (ANN). All of the tests were done using a design of experiments called full factorial design (FFD). The specimens were made of AISI 4140 steel that had been hardened to 47 HRC, and the inserts were made of coated carbide. The most impactful input features for wear, selected based on experimental outputs, were given to the neural network and trained. Tool wear is an estimated output from the training set that has been validated with satisfactory results for random conditions. The 5–10–1 network structure with the Levenberg–Marquardt (LM) learning algorithm, R2 values of 0.996602 and 0.969437 for the training and testing data, and mean square error values of 0.000133152 and 0.004443 for the training and testing data, respectively, gave the best results. The MEP values of 0.575407 and 2.977617 are very low (5%). The LM learning algorithm‐based ANN is good at predicting tool wear based on how well it predicts tool wear for both the testing set and the training set.
- Open Access
- 15 October 2022
- Published by Wiley in International Journal of Digital Multimedia Broadcasting
- Vol. 2022, 1-5
Effectiveness of Feature Extraction by PCA-Based Detection and Naive Bayes Classifier for Glaucoma Images
After cataract, glaucoma is one of the second leading retinal diseases in the world. This paper presents the methodology to detect the glaucoma using principal component analysis. The images are involved in dilation as a preprocessing, enhancement using the contrast limited adaptive histogram equalization method, and followed by the extraction of features using principal component analysis. The extracted features are classified using support vector machine, Naive Bayes, and K-nearest neighbor classifiers. Comparing with other classifiers, the Naive Bayes provides high accuracy of 95% which demonstrates the effectiveness of the feature extraction and the classifier.
- 15 October 2022
- Published by Wiley in International Journal of Digital Multimedia Broadcasting
- Vol. 2022, 1-5
Open AccessEffectiveness of Feature Extraction by PCA-Based Detection and Naive Bayes Classifier for Glaucoma Images
After cataract, glaucoma is one of the second leading retinal diseases in the world. This paper presents the methodology to detect the glaucoma using principal component analysis. The images are involved in dilation as a preprocessing, enhancement using the contrast limited adaptive histogram equalization method, and followed by the extraction of features using principal component analysis. The extracted features are classified using support vector machine, Naive Bayes, and K-nearest neighbor classifiers. Comparing with other classifiers, the Naive Bayes provides high accuracy of 95% which demonstrates the effectiveness of the feature extraction and the classifier.
- Open Access
- 23 March 2022
- Published by Wiley in Modelling and Simulation in Engineering
- Vol. 2022, 1-9
Performance Characterization of a Solar Cavity Collector Using Artificial Neural Network
It is mandatory to improve the design of the flat plate collector (FPC) used for solar thermal applications to perform well. One way to improve the performance characteristics of FPC is to retain the heat energy available inside the collector. That is, a collector should be capable to give more heat energy to working fluid for a longer duration. It has been implemented in such a way in an entertained and improved model which is known as solar cavity collector (SCC). It consists of 5 numbers of cavities equipped with inlet and outlet tubes. The same having with an enclosure has been constructed and investigated to find the optimal performance. In general, the physical dimensions of the collector influence more the functioning behaviors of SCC. The performance variables that are considered for the present study are the comparison between 5 and 7 numbers of cavities and the effect of aperture entry. Collector angle of tilt, two types of flow mode, and water mass flow rates are the other performance variables that are also considered. The data from the experimentations are trained, tested, and validated with the help of the artificial neural network (ANN). The accuracy of the model is 96%, and the end results revealed the same trend followed by both experimental and ANN simulation results. Also, the variations that occur between ANN and experimented results are ±4%.
- 23 March 2022
- Published by Wiley in Modelling and Simulation in Engineering
- Vol. 2022, 1-9
Open AccessPerformance Characterization of a Solar Cavity Collector Using Artificial Neural Network
It is mandatory to improve the design of the flat plate collector (FPC) used for solar thermal applications to perform well. One way to improve the performance characteristics of FPC is to retain the heat energy available inside the collector. That is, a collector should be capable to give more heat energy to working fluid for a longer duration. It has been implemented in such a way in an entertained and improved model which is known as solar cavity collector (SCC). It consists of 5 numbers of cavities equipped with inlet and outlet tubes. The same having with an enclosure has been constructed and investigated to find the optimal performance. In general, the physical dimensions of the collector influence more the functioning behaviors of SCC. The performance variables that are considered for the present study are the comparison between 5 and 7 numbers of cavities and the effect of aperture entry. Collector angle of tilt, two types of flow mode, and water mass flow rates are the other performance variables that are also considered. The data from the experimentations are trained, tested, and validated with the help of the artificial neural network (ANN). The accuracy of the model is 96%, and the end results revealed the same trend followed by both experimental and ANN simulation results. Also, the variations that occur between ANN and experimented results are ±4%.
- Open Access
- 1 October 2021
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (10) , 105007
Influence of AZ91 alloy reinforced with nano B4C particles on microstructural characterization, hardness and tribological properties prepared through powder metallurgy
In this present work, a milled B4C nanoparticle was reinforced into the AZ91 alloy with different weight percentages (5, 10, 15, and 20 %) by powder metallurgy. Crystalline behavior and morphology of AZ91-xB4C composite were observed with the help of XRD and SEM. The wear resistance on the load and Sliding Distance (SD) of the specimen was measured by the pin-on-disc apparatus and Vickers hardness machine to measure hardness. Wear loss decreased gradually with the addition of milled B4C nanoparticles is identified for AZ91-xB4C nanocomposites. Coefficients of friction (COF) increased with an increase in load for AZ91-xB4C nanocomposites. Microhardness was linear with the increase in the wt. % of milled B4C nanoparticles. The worn surface micrograph was also studied using a scanning electron microscope.
- 1 October 2021
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (10) , 105007
Open AccessInfluence of AZ91 alloy reinforced with nano B4C particles on microstructural characterization, hardness and tribological properties prepared through powder metallurgy
In this present work, a milled B4C nanoparticle was reinforced into the AZ91 alloy with different weight percentages (5, 10, 15, and 20 %) by powder metallurgy. Crystalline behavior and morphology of AZ91-xB4C composite were observed with the help of XRD and SEM. The wear resistance on the load and Sliding Distance (SD) of the specimen was measured by the pin-on-disc apparatus and Vickers hardness machine to measure hardness. Wear loss decreased gradually with the addition of milled B4C nanoparticles is identified for AZ91-xB4C nanocomposites. Coefficients of friction (COF) increased with an increase in load for AZ91-xB4C nanocomposites. Microhardness was linear with the increase in the wt. % of milled B4C nanoparticles. The worn surface micrograph was also studied using a scanning electron microscope.
- Open Access
- 1 January 2021
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Flexural Behaviour of RC Beams with a Circular Opening at the Flexural Zone and Shear Zone Strengthened Using Steel Plates
In this paper, an investigation on the behaviour of RC beams with circular openings in the flexural zone and shear zone strengthened using steel plates is presented. Totally seven beams were cast: a control beam, one beam with a circular opening of size of one‐third the depth of the beam (100 mmϕ) in the flexural zone, one beam with opening strengthened using the steel plate, one beam with a circular opening of size of 100 mmϕ in the shear zone, one beam with an opening in the shear zone strengthened using the steel plate, one beam with two circular openings of size of 100 mmϕ in the shear zone, and another beam with two openings in the shear zone strengthened using the steel plate. The experiments were conducted in a loading frame of 400 kN capacity. The beams were subjected to two‐point loading. The ultimate load carrying capacity reduced marginally by 1.78% and 2.8% compared to that of the control beam when a circular opening of 100 mmϕ was provided in the flexural zone and shear zone, respectively, and when the opening was strengthened with steel plates, it reduced by 3.04% and 25%, respectively, but the ductility increased when steel plates were provided. Beams with an opening of size of one‐third the depth of the beam (100 mmϕ) in the flexural zone strengthened with the steel plate can be provided, as the load carrying capacity is only marginally reduced compared to the control beam, and the ductility is more when compared with beams with unstrengthened openings.
- 1 January 2021
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Open AccessFlexural Behaviour of RC Beams with a Circular Opening at the Flexural Zone and Shear Zone Strengthened Using Steel Plates
In this paper, an investigation on the behaviour of RC beams with circular openings in the flexural zone and shear zone strengthened using steel plates is presented. Totally seven beams were cast: a control beam, one beam with a circular opening of size of one‐third the depth of the beam (100 mmϕ) in the flexural zone, one beam with opening strengthened using the steel plate, one beam with a circular opening of size of 100 mmϕ in the shear zone, one beam with an opening in the shear zone strengthened using the steel plate, one beam with two circular openings of size of 100 mmϕ in the shear zone, and another beam with two openings in the shear zone strengthened using the steel plate. The experiments were conducted in a loading frame of 400 kN capacity. The beams were subjected to two‐point loading. The ultimate load carrying capacity reduced marginally by 1.78% and 2.8% compared to that of the control beam when a circular opening of 100 mmϕ was provided in the flexural zone and shear zone, respectively, and when the opening was strengthened with steel plates, it reduced by 3.04% and 25%, respectively, but the ductility increased when steel plates were provided. Beams with an opening of size of one‐third the depth of the beam (100 mmϕ) in the flexural zone strengthened with the steel plate can be provided, as the load carrying capacity is only marginally reduced compared to the control beam, and the ductility is more when compared with beams with unstrengthened openings.
- Open Access
- 31 December 2020
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- Vol. 68 (6) , 1393-1402
Optimization on friction and wear behaviour of Al-Si alloy reinforced with B4C particles by Powder Metallurgy using Taguchi design
This research paper discusses the friction and wear behaviour of Al-12Si alloy reinforced with B4C prepared through Powder Metallurgy (P/M) method by varying the weight percentage of reinforcement (x = 2, 4, 6, 8, and 10) content. The samples were prepared by using die and punch assembly and the lubricant used to eject the sample from the die was molybdenum disulfide. The compaction was done by using a compression testing machine by applying a pressure of 800 MPa. The dry sliding friction and wear behaviour of the sample was conducted on a Pin-on-Disc machine and the experimental values of friction and wear were calibrated. The Taguchi design experiment was done by applying an L25 orthogonal array for 3 factors at 5 levels for the response parameter Coefficient of Friction (CoF) and wear loss. The SEM images show the shape, size and EDX confirm the existence of Al, Si, B4C particles in the composites. Analysis of Variance (ANOVA) for CoF of S/N ratio, shows that the reinforcement having 34.92% influence towards the S/N ratio of CoF, ANOVA for wear loss of S/N ratio shows that the sliding distance having 46.76% influence towards the S/N ratio of wear loss, when compared to that of the other two input parameters. The interaction line plot and the 2Dsurface plot for CoF and wear loss show that the increase in B4C content decreases the wear loss and CoF. The worn surface shows that the B4C addition will increase the wear resistance.
- 31 December 2020
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- Vol. 68 (6) , 1393-1402
Open AccessOptimization on friction and wear behaviour of Al-Si alloy reinforced with B4C particles by Powder Metallurgy using Taguchi design
This research paper discusses the friction and wear behaviour of Al-12Si alloy reinforced with B4C prepared through Powder Metallurgy (P/M) method by varying the weight percentage of reinforcement (x = 2, 4, 6, 8, and 10) content. The samples were prepared by using die and punch assembly and the lubricant used to eject the sample from the die was molybdenum disulfide. The compaction was done by using a compression testing machine by applying a pressure of 800 MPa. The dry sliding friction and wear behaviour of the sample was conducted on a Pin-on-Disc machine and the experimental values of friction and wear were calibrated. The Taguchi design experiment was done by applying an L25 orthogonal array for 3 factors at 5 levels for the response parameter Coefficient of Friction (CoF) and wear loss. The SEM images show the shape, size and EDX confirm the existence of Al, Si, B4C particles in the composites. Analysis of Variance (ANOVA) for CoF of S/N ratio, shows that the reinforcement having 34.92% influence towards the S/N ratio of CoF, ANOVA for wear loss of S/N ratio shows that the sliding distance having 46.76% influence towards the S/N ratio of wear loss, when compared to that of the other two input parameters. The interaction line plot and the 2Dsurface plot for CoF and wear loss show that the increase in B4C content decreases the wear loss and CoF. The worn surface shows that the B4C addition will increase the wear resistance.
- Open Access
- 30 June 2020
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- Vol. 68 (3) , 565-573
Machining of microholes in Ti-6Al-4V by hybrid micro electrical discharge machining to improve process parameters and flushing properties
In this research work, the Ti-6Al-4V material was used for the investigation of machining parameters by means of hybrid micro electrical discharge machining to improve the machining process and reduce the negative effects of debris accumulation in the drilled hole. L9 orthogonal array was used in the Taguchi based grey relational analysis to optimize the parameters such as material removal rate and diametrical accuracy of the machining process for Ti-6Al-4V. This work encompasses the design, development, and calibration of the work piece vibration platform and experimental analysis of the process parameters by means of the hybrid micro electrical discharge machining process. The maximum material removal rate and minimum surface roughness was observed at the current value of 2.5 A, pulse on time is 2 µs and pulse off time is 14.5 µs. The maximum material removal rate was observed for the increase in pulse on time with 14.4 µs and 4 A current level. The diametrical accuracy of the microholes was increased while increasing the pulse off time and decreasing the pulse on time. The fluid flow simulation has been conducted to find out the pressure drop and to know the velocity of the flow inside the hole for the effective flushing of the debris during machining.
- 30 June 2020
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- Vol. 68 (3) , 565-573
Open AccessMachining of microholes in Ti-6Al-4V by hybrid micro electrical discharge machining to improve process parameters and flushing properties
In this research work, the Ti-6Al-4V material was used for the investigation of machining parameters by means of hybrid micro electrical discharge machining to improve the machining process and reduce the negative effects of debris accumulation in the drilled hole. L9 orthogonal array was used in the Taguchi based grey relational analysis to optimize the parameters such as material removal rate and diametrical accuracy of the machining process for Ti-6Al-4V. This work encompasses the design, development, and calibration of the work piece vibration platform and experimental analysis of the process parameters by means of the hybrid micro electrical discharge machining process. The maximum material removal rate and minimum surface roughness was observed at the current value of 2.5 A, pulse on time is 2 µs and pulse off time is 14.5 µs. The maximum material removal rate was observed for the increase in pulse on time with 14.4 µs and 4 A current level. The diametrical accuracy of the microholes was increased while increasing the pulse off time and decreasing the pulse on time. The fluid flow simulation has been conducted to find out the pressure drop and to know the velocity of the flow inside the hole for the effective flushing of the debris during machining.
- 25 February 2020
- Published by SAGE Publications in Surface Engineering
- Vol. 37 (1) , 32-41
Wear and corrosion behaviour of Ti-based coating on biomedical implants
Biomedical implants are immensely manoeuvered devices that fix various deformities and injuries on medical grounds. With an emergent exploration in this field by researchers, countless combinations of materials have been discovered that perks global mankind. The ultimate goal of this experimentation is to appraise the characteristics of wear and corrosion resistance of Ti–Co–Cr-coated 316L grade austenitic stainless steel (SS) in contrast with TiN-coated and uncoated 316L SS. A micro-abrasion test was conducted on every single sample at 3N, 5N and 7N loads and were characterized in accordance with weight loss, coefficient of friction, surface roughness, Scanning Electron Microscope (SEM) analysis, X-ray Diffraction pattern (XRD), Energy Dispersive X-Ray Analysis (EDAX), Fourier-transform infrared spectroscopy (FTIR) and corrosion resistance. The findings showed that Ti–Co–Cr-coated substrate at 3N load have good mechanical tolerance and offers admirable performance. The corrosion resistance of the specimens divulges the biocompatibility of Ti–Co–Cr as being more distinct because of the existence of titanium metal.
- 25 February 2020
- Published by SAGE Publications in Surface Engineering
- Vol. 37 (1) , 32-41
Wear and corrosion behaviour of Ti-based coating on biomedical implants
Biomedical implants are immensely manoeuvered devices that fix various deformities and injuries on medical grounds. With an emergent exploration in this field by researchers, countless combinations of materials have been discovered that perks global mankind. The ultimate goal of this experimentation is to appraise the characteristics of wear and corrosion resistance of Ti–Co–Cr-coated 316L grade austenitic stainless steel (SS) in contrast with TiN-coated and uncoated 316L SS. A micro-abrasion test was conducted on every single sample at 3N, 5N and 7N loads and were characterized in accordance with weight loss, coefficient of friction, surface roughness, Scanning Electron Microscope (SEM) analysis, X-ray Diffraction pattern (XRD), Energy Dispersive X-Ray Analysis (EDAX), Fourier-transform infrared spectroscopy (FTIR) and corrosion resistance. The findings showed that Ti–Co–Cr-coated substrate at 3N load have good mechanical tolerance and offers admirable performance. The corrosion resistance of the specimens divulges the biocompatibility of Ti–Co–Cr as being more distinct because of the existence of titanium metal.