LGLuis A. Ocampo Giraldo

Luis A. Ocampo Giraldo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Luis A. Ocampo Giraldo has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Explosion Detection Using Smartphones: Ensemble Learning with the Smartphone High-Explosive Audio Recordings Dataset and the ESC-50 Dataset

    by Samuel K. Takazawa, Sarah K. Popenhagen, Luis A. Ocampo Giraldo, Jay D. Hix, Scott J. Thompson, David L. Chichester, Cleat P. Zeiler, Milton A. Garcés

    Explosion monitoring is performed by infrasound and seismoacoustic sensor networks that are distributed globally, regionally, and locally. However, these networks are unevenly and sparsely distributed, especially at the local scale, as maintaining and deploying networks is costly. With increasing interest in smaller-yield explosions, the need for more dense networks has increased. To address this issue, we propose using smartphone sensors for explosion detection as they are cost-effective and easy to deploy. Although there are studies using smartphone sensors for explosion detection, the field is still in its infancy and new technologies need to be developed. We applied a machine learning model for explosion detection using smartphone microphones. The data used were from the Smartphone High-explosive Audio Recordings Dataset (SHAReD), a collection of 326 waveforms from 70 high-explosive (HE) events recorded on smartphones, and the ESC-50 dataset, a benchmarking dataset commonly used for environmental sound classification. Two machine learning models were trained and combined into an ensemble model for explosion detection. The resulting ensemble model classified audio signals as either “explosion”, “ambient”, or “other” with true positive rates (recall) greater than 96% for all three categories.


  • Open Access

    A comparison of smartphone and infrasound microphone data from a fuel air explosive and a high explosive

    by S. K. Takazawa, S. K. Popenhagen, L. A. Ocampo Giraldo, E. S. Cardenas, J. D. Hix, S. J. Thompson, D. L. Chichester, M. A. Garcés

    For prompt detection of large (>1 kt) above-ground explosions, infrasound microphone networks and arrays are deployed at surveyed locations across the world. Denser regional and local networks are deployed for smaller explosions, however, they are limited in number and are often deployed temporarily for experiments. With the expanded interest in smaller yield explosions targeted at vulnerable areas such as population centers and key infrastructures, the need for more dense microphone networks has increased. An “attritable” (affordable, reusable, and replaceable) and flexible alternative can be provided by smartphone networks. Explosion signals from a fuel air explosive (thermobaric bomb) and a high explosive with trinitrotoluene equivalent yields of 6.35 and 3.63 kg, respectively, were captured on both an infrasound microphone and a network of smartphones. The resulting waveforms were compared in time, frequency, and time-frequency domains. The acoustic waveforms collected on smartphones produced a filtered explosion pulse due to the smartphone's diminishing frequency response at infrasound frequencies (<20 Hz) and was found difficult to be used with explosion characterization methods utilizing waveform features (peak overpressure, impulse, etc.). However, the similarities in time frequency representations and additional sensor inputs are promising for other explosion signal identification and analysis. As an example, a method utilizing the relative acoustic amplitudes for source localization using the smartphone sensor network is presented.


  • Open Access

    Explosion Detection using Smartphones: Ensemble Learning with the Smartphone High-explosive Audio Recordings Dataset and the ESC-50 Dataset

    by Samuel Kei Takazawa, Sarah K. Popenhagen, Luis A. Ocampo Giraldo, Jay D. Hix, Scott J. Thompson, David L. Chichester, Cleat P. Zeiler, Milton A. Garcés

    Explosion monitoring is performed by infrasound and seismoacoustic sensor networks that are distributed globally, regionally, and locally. However, these networks are unevenly and sparsely distributed, especially in the local scale as maintaining and deploying networks is costly. With increasing interest in smaller yield explosions, the need for more dense networks has increased. To address this issue, we propose using smartphone sensors for explosion detection as they are cost-effective and easy to deploy. Although there are studies using smartphone sensors for explosion detection, the field is still in its infancy and new technologies need to be developed. We applied a machine learning model for explosion detection using smartphone microphones. The data used were from the Smartphone High-explosion Audio Recordings Dataset (SHAReD), a collection of 326 waveforms from 70 high-explosive (HE) events recorded on smartphones, and the ESC-50 dataset, a benchmarking dataset commonly used for environmental sound classification. Two machine learning models were trained and combined into an ensemble model for explosion detection. The resulting ensemble model classified audio signals as either “explosion,” “ambient,” or “other” with true positive rates (recall) greater than 96% for all three categories.


  • Open Access

    Comparative Analysis of Explosion Signals on Smartphones and Seismometers [Poster]

    by Samuel Kei Takazawa, Honolulu Univ. Of Hawaii At Manoa, Luis A Ocampo Giraldo, Jay D Hix, David L Chichester, Scott Thompson, Blaine M Bockholt, Milton Garcés

    Seismoacoustic signatures from a chemical explosion was recorded on two seismometers and eight smartphone accelerometers at Idaho National Laboratory (INL). The captured waveform’s propagation and its time frequency representations are compared. The smartphone accelerometers were able to pick up a clear seismoacoustic explosion signal at within 1 km (150 m/kg1/3) and a noisy signal up to 5.3 km (790 m/kg1/3).

  • Open Access

    Long-length Scintillating Fibers for Nuclear Waste Repository [Poster]

    by Luis A Ocampo Giraldo, Scott J Thompson, Jay D Hix, James T Johnson, David L Chichester

    Containment verification in inaccessible radiological & nuclear waste repositories

  • Open Access

    Assembly and Initial Testing of the Gamma-Ray Emission Tomography Assessment Prototype for Irradiated Fuel

    by Scott J Thompson, Jay D Hix, James T Johnson, David L Chichester, Thomas Vernon Holschuh Ii, Luis A Ocampo Giraldo, Kamrynn Elizabeth Schiller, Seth Michael Kilby

    The following report documents the final development, assembly, and initial testing of the gamma-ray emission tomography assessment system (GRETA-1) for post-irradiation examination of irradiated fuel. It includes descriptions of the system components, including the high-purity germanium gamma-ray detector, the surrounding shield and collimator, the sample scanning hardware, and the control and collection software package. A series of MCNP6 simulations were performed that modeled a fuel rod scan to test image reconstruction algorithms with a complex and understood source distribution. A bench-top scan of isotopic check sources was also performed and analyzed using standard image reconstruction algorithms. The system is currently awaiting deployment at Idaho National Laboratory’s Hot Fuel Examination Facility.

  • Acoustic Signatures of Solvent Extraction Processes

    by Sarah Popenhagen, Usdoe National Nuclear Security Administration (Nnsa), Milton Garces, Luis Ocampo Giraldo, Edna Cardenas

  • Open Access

    TRIPWIRE Deployment and Field Testing Results Report

    by Luis A Ocampo Giraldo, Usdoe National Nuclear Security Administration (Nnsa), Scott J Thompson, Jay D Hix, James T Johnson, David L Chichester

    TRIPWIRE is a multi-modal system for containment verification in inaccessible radiological and nuclear waste repositories. The sensing modes are focused on radiation, electromagnetic and vibration. The radiation detection component has been developed over the last three years at Idaho National Laboratory (INL). This development has focused on the fabrication, characterization, and testing of long-length (greater than 10-m) plastic scintillating fibers. This fiscal year, the focus of TRIPWIRE has been on field testing and demonstration of the radiation sensing component in a relevant environment. After reviewing the static storage facilities at INL, the Radioactive Scrap Waste Facility (RSWF) south storage area outside the Materials and Fuels Complex (MFC) was selected due to its periodic changes in configuration and inventory. This report summarizes the research outcomes for the work performed in fiscal year (FY) 2023.

  • Open Access

    TRIPWIRE: Muti-Modal Distributed Sensing for Repository Verification [Slides]

    by Luis A Ocampo Giraldo, David L Chichester, Scott J Thompson, James T Johnson, Jay D Hix

    The slides give an overview of the progress to date on project Tripwire.