HYHashira Yamamoto

Hashira Yamamoto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hashira Yamamoto has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Simultaneous generation of hydrogen and carbon monoxide using a wet-type plasma reactor

    by Haruhiko Yamasaki, Ren Ushida, Tota Hiranaka, Junyang Wei, Tomoyuki Kuroki, Shiori Hori, Hashira Yamamoto, Masaaki Okubo

  • Numerical and Experimental Analysis of Plasma-Chemical Hybrid Process for Emission Control of Fossil-Fuel Fired Glass Melting Furnace

    by Haruhiko Yamasaki, Ryosuke Kinoshita, Tomoyuki Kuroki, Hashira Yamamoto, Masaaki Okubo

    Inductive power transfer (IPT) is a promising solution for autonomous unmanned aerial systems (UAS), but stringent size and weight constraints demand ultra-compact receiver designs. This work proposes a compensation-less center-tapped (CT) receiver for high-coupling IPT systems integrated into a reconfigurable drone powertrain. The system operates as a two-stage IPT architecture, combining a CT rectifier with a powertrain-integrated, two-phase interleaved synchronous buck converter during charging mode. This paper derives a differential–equation-based model that describes the operation of a CT rectifier in an LCC-None IPT system. Moreover, the model quantifies the effect of system parameters and parasitic components on diode voltage overshoot. A multi-objective optimization (MOO) framework maximizes efficiency and gravimetric power density while minimizing diode voltage overshoot. Two methods are evaluated to suppress diode voltage overshoot: (1) a passive snubber circuit and (2) a clamping capacitor. An optimum design is selected and prototyped, delivering an output power of 1.74kW to a 48-V battery. The system reaches a peak efficiency of 89.5% with a total added weight of 372.1 g. This represents a practical power-to-weight ratio of 4.7 W/g—the highest gravimetric power density reported so far for this UAS IPT charging level.

  • Open Access

    Impact of NH3 combustion on the properties of carbonate-free Na/Ca silicate-based soda-lime silicate glass

    by Hashira Yamamoto, Noriaki Nakatsuka, Shiori Hori, Kenta Kikuchi, Tomohiro Matsunami, Koji Suzuki, Toshiyuki Tomoda, Fumiteru Akamatsu

  • Effect of ammonia-air combustion melting on the color and physical properties of soda lime silicate

    by Hashira Yamamoto, Noriaki Nakatsuka, Shiori Hori, Kenta Kikuchi, Tomohiro Matsunami, Koji Suzuki, Toshiyuki Tomoda, Fumiteru Akamatsu


  • Energy‐saving glass‐melting‐furnace with semi‐dry plasma‐chemical hybrid process

    by Haruhiko Yamasaki, Ryosuke Nishioka, Yuta Fukuda, Tomoyuki Kuroki, Hashira Yamamoto, Masaaki Okubo

    A low‐cost plasma‐chemical hybrid process (PCHP) is proposed for simultaneous NO x and SO x treatment. PCHP can be integrated into existing desulfurization reactors by combining plasma oxidation and chemical reduction. PCHP is applied to glass melting furnace emissions with limited denitration technology, achieving higher removal efficiencies of NO, NO x , and SO 2 (43%, 38%, and 28%, respectively) by optimizing reductant spray and installation angles. PCHP also improves fuel consumption, with a 0.04 increase in air ratio reducing energy consumption by 3.6 kL/day (equivalent to 6.6 t(CO 2 )/day reduction). In addition, PCHP allows for the collection and reuse of treated SO 2 as sodium sulfate particles, making it a suitable aftertreatment technology for glass manufacturing exhaust.


  • Dry Emission Control Technology for Glass Melting Furnace by Plasma-Chemical Hybrid Processing

    by Haruhiko Yamasaki, Hashira Yamamoto, Yuki Koizumi, Yuta Fukuda, Tomoyuki Kuroki, Masaaki Okubo

    To use the continuous combustion of fossil fuels as a sustainable energy source, a low-cost and energy-saving exhaust gas treatment for NO x , SO x , and suspended particulate matter is required. The plasma hybrid exhaust gas treatment technology proposed by the authors is not only a method of plasma treatment, but also a method that combines it with a chemical process, such as chemical solution stabilizer, to clean exhaust gas. This study reports the simulation and application of glass melting furnace exhaust gas treatment as a practical result of the plasma chemical hybrid process (PCHP). In the experiment, higher removal efficiencies of NO, NO x , and SO x (33, 16, and 55%, respectively) were obtained. The energy efficiency of NO x removal by evaluating the electrical power using the cost of NaOH and the power of ozonizers was measured to be 23 g(NO 2 )/kWh. From comparison, the simulated and experimental temperature distributions and NO x concentration were found to be in good agreements. This indicates that numerical design simulation produces a satisfactory result. PCHP can potentially be the most suitable method for exhaust gas treatment in glass melting furnaces.


  • Pilot-Scale NOx and SOx Aftertreatment Using a Two-Phase Ozone and Chemical Injection in Glass-Melting-Furnace Exhaust Gas

    by Hashira Yamamoto, Tomoyuki Kuroki, Hidekatsu Fujishima, Masaaki Okubo

    As NO $_x$ and SO $_x$ have significant environmental impacts, advanced treatments are required to remove them from the exhaust gas of a glass melting furnace. Here, we investigate a plasma-chemical hybrid process (PCHP) for this purpose. A pilot-scale experiment of the simultaneous removal of NO $_x$ and SO $_x$ using a PCHP combined with the existing semi-dry type desulfurization reactor is conducted on actual high-temperature exhaust gas from a glass melting furnace. NO in the exhaust gas is oxidized to NO $_2$ using O $_3$ . The exhaust gas must be cooled to less than 150 °C in order to suppress the thermal decomposition of O $_3$ , while the gas temperature at the outlet of the semi-dry reactor must be kept at 200-250 °C to protect the dry-type electrostatic precipitator. Therefore, it is important to form a local cooling area for NO oxidation in the reactor. In this study, we use the three-fluid nozzles of O $_3$ , water, and air to form the local cooling area and effectively oxidize NO to NO $_2$ . In addition, we spray NaOH aqueous solution for SO $_2$ absorption downstream of the NO oxidation area to allow sufficient time for NO oxidation. The SO $_2$ reacts with NaOH to produce Na $_2$ SO $_3$ , a powerful reducing agent. Subsequently, NO $_2$ reacts with Na $_2$ SO $_3$ and is reduced to N $_2$ . As a result, the ratio of the amount of removed NO and NO $_x$ to the amount of injected O $_3$ is 64% and 78%, respectively; therefore, high efficiency is obtained. This study includes actual examples of the treatment of exhaust gas in a glass melting furnace, using PCHP de-SO $_X$ and de-NO $_X$ technologies along with results from pilot-scale experiments.


  • Application of Plasma-chemical Hybrid Process to Semi-dry Desulfurization Equipment to Glass Melting Furnace

    by Masashi Kawata, Hiroki Shokawa, Tomoyuki Kuroki, Hidekatsu Fujishima, Hashira Yamamoto, Masaaki Okubo

    Nitrogen oxides (NOx) and sulfur oxides (SOx) are the major components of environmental pollution; therefore they should be removed. In this study, NO oxidation process by using ozone gas and NOx removal process by using Na2SO3 solutions combined with semi-dry desulfurization equipment to glass melting furnace were investigated. Experiments were carried out with varying gas-liquid reaction time in the lab-scale experiment and Na2SO3 concentration in the pilot-scale experiment. In the lab-scale experiment, NOx removal efficiency was reached 64.9 % in maximum. Furthermore, in the pilot-scale experiment, when the ratio of the amount of ozone gas to the amount of NO in the exhaust gas was 23 %, NOx removal efficiency was reached up to 17.0 %. There was no effect on desulfurization by applying plasma-chemical hybrid process to semi-dry desulfurization equipment.

  • Pilot-Scale Exhaust Gas Treatment for a Glass Manufacturing System Using a Plasma Combined Semi-dry Chemical Process

    by Hashira Yamamoto, Tomoyuki Kuroki, Hidekatsu Fujishima, Yuri Yamamoto, Kouta Yoshida, Masaaki Okubo

    A pilot-scale simultaneous removal of NOW and SO x , as a nonthermal plasma and chemical hybrid process (PCHP), is carried out on combustion exhaust gas in a glass manufacturing system. The PCHP is implemented in an actual semi-dry-type exhaust gas treatment system. The exhaust gas (12 700 m 3 N/h) is produced by the combustion of fossil fuels and contains both NO x (160 ppm) and SOW (150 ppm). In PCHP, NO is oxidized to water-soluble NO 2 through a plasma process using ozone. Na 2 SO 3 is then produced as a byproduct in a desulfurizing process using a solution of NaOH. The generated NO 2 is then reduced to N 2 and Na 2 SO 4 using an Na 2 SO 3 solution, followed by the dried Na 2 SO 4 particles being removed in a semi-dry reactor by a dry-type electrostatic precipitator. Our findings show the molar ratio of NO to the injected ozone to be more than 0.75. NO and SOW removal efficiencies of 28% and 63% are obtained. Further, the paper discusses de-NO x by the use of a bag filter (BF) for the injection of the NaHCO 3 at the BF inlet. Due to the effect of ozone and NaHCO 3 , NO x removal efficiency is increased by up to 45%. Our results show that higher de-NO x and de-SO x efficiencies are obtained by maintaining a local exhaust gas temperature of less than 150 °C. Through this experiment, it is confirmed that this simultaneous treatment of NO x and SO x using semi-dry-type PCHP is highly effective and promising for exhaust gas treatment in glass manufacturing.


  • NOx and SOx removals for exhaust gas in glass melting furnace using a plasma and dry chemical hybrid process

    by Hashira Yamamoto, Tomoyuki Kuroki, Hidekatsu Fujishima, Yuri Yamamoto, Kouta Yoshida, Masaaki Okubo

    Laboratory-scale experiments were carried out on simultaneous removal of NOx and SOx from a glass melting furnace using a semi-dry plasma and chemical hybrid process (PCHP). The experimental apparatus is simulated to the aftertreatment system for a full-scale semi-dry glass bottle manufacturing system, and NOx removal processes of plasma-induced ozone gas injection for the oxidation of NO followed by Na2SO3 solution reduction of NO2 and a dry neutralization removal of NO2 by NaHCO3 or Na2CO3. First, NO removal experiments are carried out with water sprayed to form a localized cooling area by heat removal of vaporization in the reactor. As a result, the NO oxidation efficiencies of 76% (Liquid-to-gas ratio, L/G = 0.7 L/m3) and 98% (L/G = 2.0 L/m3) are achieved by the injecting ozone into the localized cooling area. Next, for experiments with a mixed simulated gas of NO and SO2, when the mixed aqueous solution of Na2SO3 and NaOH is sprayed under the conditions of L/G = 0.7 L/m3 and 2.0 L/m3, NOx removal efficiencies of 45% and 48% with NO oxidation efficiencies of 62% and 70% are obtained, respectively. Simultaneously, more than 75% of SO2 is removed. Finally, the neutralization removal of NO2 is investigated for the reaction with NaHCO3 or Na2CO3 onto the filter in the reactor. It is clarified that Na2CO3 is more effective than NaHCO3 for the removal of NO2. The stable NO2 removal is achieved at the dry type reactor. It was confirmed from the experimental results that PCHP combined with dry reduction chemicals method was promising for effective exhaust gas aftertreatment for a glass manufacturing system.