Ljiljana Đukanović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ljiljana Đukanović has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Bojana Lević
University of Belgrade
7 shared publications - Ana Radivojević
University of Belgrade
6 shared publications Ana Radivojević
3 shared publications- Dušan Ignjatović
Department of Architectural Technologies, Faculty of Architecture, University of Belgrade, 11000 Belgrade, Serbia
3 shared publications - Aleksandar Rajčić
University of Belgrade,Belgrade,Serbia
2 shared publications - Bojana Zeković
University of Belgrade , Faculty of Architecture , Republic of Serbia
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Arhitektura i urbanizam
- No. 62,p. 5-17
The beginnings of prefabricated housing construction in Belgrade (1947-1951): Contribution made by the Design Bureau of the Executive Committee of the People's Committee of Belgrade
This paper presents and discusses the first prefabricated and semi-prefabricated residential buildings designed by the Design Bureau of the Executive Committee of the People's Committee of Belgrade during the implementation of the First Five-Year Plan (1947-1951). One of the primary objectives of the plan was to construct mass housing, which would provide much-needed accommodation for the rapidly growing population of Belgrade, liberated from occupation. Although this period has been insufficiently studied and often criticized in previous research, it was during this time that the concepts of prefabricated housing and prefabrication in general were formulated. They further developed in the following decades and significantly influenced the modernization of domestic construction practice. The idea of prefabricated housing was based on the difficult-to-achieve goals regarding the number of residential square meters that had to be built, set by the First Five-Year Plan. Therefore, the paper briefly discusses the circumstances of residential construction in the given period, as well as the development of the idea of prefabricated housing. Further, it presents and analyzes prefabricated and semi-prefabricated buildings that were designed and built at several locations in Belgrade under the jurisdiction of the city authorities. This paper is based on the research of available archival materials, data from the daily press, previously published papers, and field work. Its goal is to shed light on an insufficiently studied period in the history of residential architecture in Belgrade, as well as to offer a new perspective on the architectural and construction aspirations of the first post-war years.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Arhitektura i urbanizam
- No. 62,p. 5-17
Open AccessThe beginnings of prefabricated housing construction in Belgrade (1947-1951): Contribution made by the Design Bureau of the Executive Committee of the People's Committee of Belgrade
This paper presents and discusses the first prefabricated and semi-prefabricated residential buildings designed by the Design Bureau of the Executive Committee of the People's Committee of Belgrade during the implementation of the First Five-Year Plan (1947-1951). One of the primary objectives of the plan was to construct mass housing, which would provide much-needed accommodation for the rapidly growing population of Belgrade, liberated from occupation. Although this period has been insufficiently studied and often criticized in previous research, it was during this time that the concepts of prefabricated housing and prefabrication in general were formulated. They further developed in the following decades and significantly influenced the modernization of domestic construction practice. The idea of prefabricated housing was based on the difficult-to-achieve goals regarding the number of residential square meters that had to be built, set by the First Five-Year Plan. Therefore, the paper briefly discusses the circumstances of residential construction in the given period, as well as the development of the idea of prefabricated housing. Further, it presents and analyzes prefabricated and semi-prefabricated buildings that were designed and built at several locations in Belgrade under the jurisdiction of the city authorities. This paper is based on the research of available archival materials, data from the daily press, previously published papers, and field work. Its goal is to shed light on an insufficiently studied period in the history of residential architecture in Belgrade, as well as to offer a new perspective on the architectural and construction aspirations of the first post-war years.
- Open Access
- 11 September 2025
- Published by Faculty of Civil Engineering and Architecture, University of Nis
- Vol. 1 (1) , 185-196
A Methodological Framework for Integrated Life Cycle Assessment and Life Cycle Cost of Passive Energy Renovation of Residential Buildings in Serbia
This paper develops a methodological framework for the integrated assessment of life cycle assessment (LCA) and life cycle costs (LCC) in the decision-making process for passive energy renovation of multi-family residential buildings in Serbia. The proposed framework enables a systematic selection of building materials and components for energy renovation, taking into account both the environmental footprint and the total costs over the life cycle of the building after renovation. The methodological framework consists of seven steps. The first step involves calculating the operational energy of the existing building, analyzing the total energy consumption required for the building’s functionality, including heating, cooling, ventilation, lighting, and electrical appliances. Next, passive energy renovation scenarios are defined, and various material and assembly proposals for improving energy efficiency are formulated. The next step involves calculating the embodied energy for each renovation scenario, considering the energy required for material extraction, production, transportation, installation, maintenance, and recycling. This is followed by a simulation-based calculation of operational energy for each renovation scenario and the determination of potential energy savings. Subsequently, the environmental impact of materials is evaluated through a life cycle assessment of selected materials and assemblies. In parallel with the life cycle assessment, a life cycle cost analysis is conducted to assess the long-term economic aspects of energy renovation from the moment of renovation until the end of the building’s life cycle. Finally, the results are integrated to support optimal decision-making by analyzing all previous steps to determine the best material choices for achieving both environmentally and economically sustainable energy renovation. The aim of this research is to provide an applicable framework for assessing the environmental impacts and life cycle costs of a building from the renovation phase to the end of its life cycle, facilitating the advancement of sustainable energy renovation strategies for multi-family residential buildings.
- 11 September 2025
- Published by Faculty of Civil Engineering and Architecture, University of Nis
- Vol. 1 (1) , 185-196
Open AccessA Methodological Framework for Integrated Life Cycle Assessment and Life Cycle Cost of Passive Energy Renovation of Residential Buildings in Serbia
This paper develops a methodological framework for the integrated assessment of life cycle assessment (LCA) and life cycle costs (LCC) in the decision-making process for passive energy renovation of multi-family residential buildings in Serbia. The proposed framework enables a systematic selection of building materials and components for energy renovation, taking into account both the environmental footprint and the total costs over the life cycle of the building after renovation. The methodological framework consists of seven steps. The first step involves calculating the operational energy of the existing building, analyzing the total energy consumption required for the building’s functionality, including heating, cooling, ventilation, lighting, and electrical appliances. Next, passive energy renovation scenarios are defined, and various material and assembly proposals for improving energy efficiency are formulated. The next step involves calculating the embodied energy for each renovation scenario, considering the energy required for material extraction, production, transportation, installation, maintenance, and recycling. This is followed by a simulation-based calculation of operational energy for each renovation scenario and the determination of potential energy savings. Subsequently, the environmental impact of materials is evaluated through a life cycle assessment of selected materials and assemblies. In parallel with the life cycle assessment, a life cycle cost analysis is conducted to assess the long-term economic aspects of energy renovation from the moment of renovation until the end of the building’s life cycle. Finally, the results are integrated to support optimal decision-making by analyzing all previous steps to determine the best material choices for achieving both environmentally and economically sustainable energy renovation. The aim of this research is to provide an applicable framework for assessing the environmental impacts and life cycle costs of a building from the renovation phase to the end of its life cycle, facilitating the advancement of sustainable energy renovation strategies for multi-family residential buildings.
- 16 July 2025
- Published by Springer Nature
- p. 317-328
Extending the Lifespan of the Post-War Housing Stock—Multi-criteria Renovation
- 16 July 2025
- Published by Springer Nature
- p. 317-328
Extending the Lifespan of the Post-War Housing Stock—Multi-criteria Renovation
- Open Access
- 1 January 2025
- Published by Scientific-Professional Society for Disaster Risk Management
- p. 126-133
Evaluation of the Lifespan and Quality of Multi-Family Residential Buildings in Serbia: A Typological Perspective
- 1 January 2025
- Published by Scientific-Professional Society for Disaster Risk Management
- p. 126-133
Open AccessEvaluation of the Lifespan and Quality of Multi-Family Residential Buildings in Serbia: A Typological Perspective
- Open Access
- 1 January 2025
- Published by Scientific-Professional Society for Disaster Risk Management
- p. 43-50
Comparative Life Cycle Assessment of Embedded Materials in the Common Wall Types: Case of the Contemporary Serbian Building Practice
- 1 January 2025
- Published by Scientific-Professional Society for Disaster Risk Management
- p. 43-50
Open AccessComparative Life Cycle Assessment of Embedded Materials in the Common Wall Types: Case of the Contemporary Serbian Building Practice
- Open Access
- 1 January 2025
- Published by National Library of Serbia in Facta universitatis - series: Architecture and Civil Engineering
- Vol. 23 (2) , 159-176
Possibilities and scope of comprehensive renovation of multifamily residential buildings in cultural-historic areas: A case study of protected building in the old part of Belgrade
The paper analyses the possibilities and scopes of comprehensive renovation of multifamily residential buildings located in the central urban core within cultural historic areas, where the buildings are protected as cultural monuments. A considerable number of these buildings was constructed before thermal protection in construction appeared in domestic building regulations, meaning that they often do not meet modern standards of residential comfort. The renovation of such buildings is subject to specific conditions, with limited possibilities for intervention, raising questions about the benefits and ultimate outcomes of a such renovation. The paper examines the possibilities of renovating protected buildings and determines whether significant energy saving and spatial improvements can be achieved for these buildings. The study presents an example of comprehensive building renovation in Belgrade in an area protected as a cultural-historical entity. The research analyses renovation options to achieve the maximum possible energy saving by expanding the usable space. Based on the Knauf software simulations, the energy savings for heating compared to the existing state are 34% in Solution 1 and 69% in Solution 2. The goal of the research is to ascertain possibilities of comprehensive renovation of protected residential buildings without compromising their original architectural and historical values.
- 1 January 2025
- Published by National Library of Serbia in Facta universitatis - series: Architecture and Civil Engineering
- Vol. 23 (2) , 159-176
Open AccessPossibilities and scope of comprehensive renovation of multifamily residential buildings in cultural-historic areas: A case study of protected building in the old part of Belgrade
The paper analyses the possibilities and scopes of comprehensive renovation of multifamily residential buildings located in the central urban core within cultural historic areas, where the buildings are protected as cultural monuments. A considerable number of these buildings was constructed before thermal protection in construction appeared in domestic building regulations, meaning that they often do not meet modern standards of residential comfort. The renovation of such buildings is subject to specific conditions, with limited possibilities for intervention, raising questions about the benefits and ultimate outcomes of a such renovation. The paper examines the possibilities of renovating protected buildings and determines whether significant energy saving and spatial improvements can be achieved for these buildings. The study presents an example of comprehensive building renovation in Belgrade in an area protected as a cultural-historical entity. The research analyses renovation options to achieve the maximum possible energy saving by expanding the usable space. Based on the Knauf software simulations, the energy savings for heating compared to the existing state are 34% in Solution 1 and 69% in Solution 2. The goal of the research is to ascertain possibilities of comprehensive renovation of protected residential buildings without compromising their original architectural and historical values.
- 11 November 2023
- Published by Springer Nature in Energy Efficiency
- Vol. 16 (8) , 1-35
Potentials for a complex and integrated refurbishment of post-war housing stock of Serbia
- 11 November 2023
- Published by Springer Nature in Energy Efficiency
- Vol. 16 (8) , 1-35
Potentials for a complex and integrated refurbishment of post-war housing stock of Serbia
- Open Access
- 18 September 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (18) , 13884
Approaches for Complex and Integrated Refurbishment to Improve Energy Efficiency and Spatial Comfort of the Existing Post-War Mass Housing Stock in Serbia
The research presents approaches to the complex refurbishment of multi-family buildings constructed during the mass construction period in Serbia. These buildings comprise a quarter of Serbia’s housing stock, are characterized by high energy consumption for heating, and have major spatial and organizational deficiencies: small apartments, outdated and inflexible spatial organization, and the absence of elevators. The subject of the research is the application of the methodology of complex and integrated refurbishment by adding volume to existing multi-family buildings with the goal of achieving higher energy efficiency while remodeling and modernizing residential units and improving vertical building communications. The research presents a comparative analysis of the energy performance and spatial organization of the existing building and three variants of building improvement: Case 1 (without volumetric additions), Case 2 (with volumetric additions—relocating vertical communications), and Case 3 (with volumetric additions—expanding usable living space). Based on the Knaufterm simulations, the energy savings for heating energy consumption compared to the existing state are 81% in Case 1, 89% in Case 2, and 87% in Case 3. Based on predefined parameters of spatial comfort, a comparative analysis of spatial comfort in residential units was conducted for all three improvement variants.
- 18 September 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (18) , 13884
Open AccessApproaches for Complex and Integrated Refurbishment to Improve Energy Efficiency and Spatial Comfort of the Existing Post-War Mass Housing Stock in Serbia
The research presents approaches to the complex refurbishment of multi-family buildings constructed during the mass construction period in Serbia. These buildings comprise a quarter of Serbia’s housing stock, are characterized by high energy consumption for heating, and have major spatial and organizational deficiencies: small apartments, outdated and inflexible spatial organization, and the absence of elevators. The subject of the research is the application of the methodology of complex and integrated refurbishment by adding volume to existing multi-family buildings with the goal of achieving higher energy efficiency while remodeling and modernizing residential units and improving vertical building communications. The research presents a comparative analysis of the energy performance and spatial organization of the existing building and three variants of building improvement: Case 1 (without volumetric additions), Case 2 (with volumetric additions—relocating vertical communications), and Case 3 (with volumetric additions—expanding usable living space). Based on the Knaufterm simulations, the energy savings for heating energy consumption compared to the existing state are 81% in Case 1, 89% in Case 2, and 87% in Case 3. Based on predefined parameters of spatial comfort, a comparative analysis of spatial comfort in residential units was conducted for all three improvement variants.
- Open Access
- 30 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4074
Energy Refurbishment of Serbian School Building Stock—A Typology Tool Methodology Development
Energy refurbishment of school buildings is a priority regarding both energy consumption in buildings and improving comfort conditions for sensitive young occupants. During 2016–18, a group of teachers and associates from the Faculty of Architecture, Mechanical Engineering, and Electrical Engineering from the University in Belgrade participated in the project “Energy efficiency in public buildings” in cooperation with GIZ (Deutsche Gesellschaft für Internationale Zusammenarbeit), University of Belgrade, Faculty of Architecture and Ministry of Mining and Energy of the Republic of Serbia. During 2016 and 2017, a comprehensive survey and database of public buildings were conducted by the local community. The focus of the research was the facilities of children’s institutions, and detailed data were collected to determine the current building stock conditions, energy consumption, and possible improvements. This paper presents the methodology of the project based on defining the typology of buildings, determining the representatives of the characteristic periods of construction, and analyzing their energy performance. Five possible scenarios were considered: designed condition, existing state, and three levels of a building improvement. The main goal of this project was to ascertain the entire fund for school buildings, indicate the potential for energy savings of this type of public building at the national level, and use this as a starting point for developing strategic decisions and further energy efficiency policies. This paper presents the complete results of the research on school buildings in Serbia, their energy performance, and possible energy savings. Key findings show that a great majority of schools are in a poor state in terms of their energy efficiency, but at the same time, there is a large potential for improvement of building envelope, HVAC, and lighting systems, which can cut the current energy need for heating to up to 80%.
- 30 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4074
Open AccessEnergy Refurbishment of Serbian School Building Stock—A Typology Tool Methodology Development
Energy refurbishment of school buildings is a priority regarding both energy consumption in buildings and improving comfort conditions for sensitive young occupants. During 2016–18, a group of teachers and associates from the Faculty of Architecture, Mechanical Engineering, and Electrical Engineering from the University in Belgrade participated in the project “Energy efficiency in public buildings” in cooperation with GIZ (Deutsche Gesellschaft für Internationale Zusammenarbeit), University of Belgrade, Faculty of Architecture and Ministry of Mining and Energy of the Republic of Serbia. During 2016 and 2017, a comprehensive survey and database of public buildings were conducted by the local community. The focus of the research was the facilities of children’s institutions, and detailed data were collected to determine the current building stock conditions, energy consumption, and possible improvements. This paper presents the methodology of the project based on defining the typology of buildings, determining the representatives of the characteristic periods of construction, and analyzing their energy performance. Five possible scenarios were considered: designed condition, existing state, and three levels of a building improvement. The main goal of this project was to ascertain the entire fund for school buildings, indicate the potential for energy savings of this type of public building at the national level, and use this as a starting point for developing strategic decisions and further energy efficiency policies. This paper presents the complete results of the research on school buildings in Serbia, their energy performance, and possible energy savings. Key findings show that a great majority of schools are in a poor state in terms of their energy efficiency, but at the same time, there is a large potential for improvement of building envelope, HVAC, and lighting systems, which can cut the current energy need for heating to up to 80%.
- Open Access
- 12 April 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (8) , 4262
Methodology for Residential Building Stock Refurbishment Planning—Development of Local Building Typologies
This paper presents the methodology for the implementation of building typology principles as a tool for the strategic planning of residential building stock energy retrofits on a municipal level in Serbia. Research was conducted under the IEE EPISCOPE (Intelligent Energy Europe EPISCOPE/TABULA project) project with the aim of developing an adequate tool for creating building stock energy retrofit management strategies on a local level. An approach that envisions the diversity and uneven spatial distribution of building stock in smaller scale municipalities and includes statistically relevant sampling of all relevant building types was developed and tested in the pilot project that focused on the city of Vršac. Two options for local typology development were formulated: a top-down approach, which relies on the data from the national typology or other available databases by reducing them to the local level, and a bottom-up approach, which represents a new data gathering and processing method. Both approaches were tested in the pilot project and the results are compared in this paper. From the conclusions of these analyses, a common methodology for the development of local building typologies has been defined. It can be used in the strategic planning of building stock, whether for the purpose of developing local energy action plans (LEAPs) or other purposes internationally.
- 12 April 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (8) , 4262
Open AccessMethodology for Residential Building Stock Refurbishment Planning—Development of Local Building Typologies
This paper presents the methodology for the implementation of building typology principles as a tool for the strategic planning of residential building stock energy retrofits on a municipal level in Serbia. Research was conducted under the IEE EPISCOPE (Intelligent Energy Europe EPISCOPE/TABULA project) project with the aim of developing an adequate tool for creating building stock energy retrofit management strategies on a local level. An approach that envisions the diversity and uneven spatial distribution of building stock in smaller scale municipalities and includes statistically relevant sampling of all relevant building types was developed and tested in the pilot project that focused on the city of Vršac. Two options for local typology development were formulated: a top-down approach, which relies on the data from the national typology or other available databases by reducing them to the local level, and a bottom-up approach, which represents a new data gathering and processing method. Both approaches were tested in the pilot project and the results are compared in this paper. From the conclusions of these analyses, a common methodology for the development of local building typologies has been defined. It can be used in the strategic planning of building stock, whether for the purpose of developing local energy action plans (LEAPs) or other purposes internationally.