Dušan Ignjatović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dušan Ignjatović has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Nataša Ćuković Ignjatović
University of Belgrade — Faculty of Architecture
9 shared publications - Bojana Zeković
University of Belgrade , Faculty of Architecture , Republic of Serbia
7 shared publications - Nikola Miletić
University of Belgrade , Faculty of Architecture , Republic of Serbia
4 shared publications - Ljiljana Đukanović
University of Belgrade
3 shared publications - Aleksandar Rajčić
University of Belgrade,Belgrade,Serbia
2 shared publications - Ana Radivojević
University of Belgrade
1 shared publication
Latest Publications
- 16 July 2025
- Published by Springer Nature
- p. 455-468
Methodologies for Using LEED in Academic Architectural Education
- 16 July 2025
- Published by Springer Nature
- p. 455-468
Methodologies for Using LEED in Academic Architectural Education
- Open Access
- 1 March 2024
- Published by Walter de Gruyter GmbH in Economic Themes
- Vol. 62 (1) , 45-66
Cost-Benefit Analysis of Building Energy Refurbishment – Case Study of A Municipal Public Building 1
For achieving transition towards a climate neutral, cleaner and healthier environment we must tackle the issues which contribute mostly to climate change and pollution, through fossil fuels excessive consumption and inefficient use of other resources. Construction and operation of buildings is certainly one of these issues, with estimation that buildings consume about 40% of the total energy (EU). One of the strategies that is considered most effective in making the building sector more resource and energy efficient is refurbishment of old buildings, which no longer meet criteria for achieving adequate comfort with minimal energy use. Their refurbishment, opposed to their demolition and construction of new ones, brings numerous environmental benefits, and also drives the transitions of entire cities and communities towards a more resilient and better environment. Recent policies (Energy Efficiency Directives, EU Green Deal, The New European Bauhaus initiative) also highlight the importance of building refurbishment and set goals for ambitious refurbishment rates for the entire building stock. At the same time, they highlight the importance of refurbishment of public buildings, because of the positive implications it has in terms of showcase and educational purposes. This paper presents the case study of refurbishment options for a characteristic municipal building, through cost-benefit analysis of different refurbishment scenarios.
- 1 March 2024
- Published by Walter de Gruyter GmbH in Economic Themes
- Vol. 62 (1) , 45-66
Open AccessCost-Benefit Analysis of Building Energy Refurbishment – Case Study of A Municipal Public Building 1
For achieving transition towards a climate neutral, cleaner and healthier environment we must tackle the issues which contribute mostly to climate change and pollution, through fossil fuels excessive consumption and inefficient use of other resources. Construction and operation of buildings is certainly one of these issues, with estimation that buildings consume about 40% of the total energy (EU). One of the strategies that is considered most effective in making the building sector more resource and energy efficient is refurbishment of old buildings, which no longer meet criteria for achieving adequate comfort with minimal energy use. Their refurbishment, opposed to their demolition and construction of new ones, brings numerous environmental benefits, and also drives the transitions of entire cities and communities towards a more resilient and better environment. Recent policies (Energy Efficiency Directives, EU Green Deal, The New European Bauhaus initiative) also highlight the importance of building refurbishment and set goals for ambitious refurbishment rates for the entire building stock. At the same time, they highlight the importance of refurbishment of public buildings, because of the positive implications it has in terms of showcase and educational purposes. This paper presents the case study of refurbishment options for a characteristic municipal building, through cost-benefit analysis of different refurbishment scenarios.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Invited pa,p. 71-78
Non-invasive methods for assessing the performance of architectural envelopes
Contemporary architectural practice is characterized by the pursuit of high levels of energy efficiency, which results in the application of complex calculation methods and performance simulations during the design of buildings. Simultaneously, the construction process and, especially, the certification of completed buildings are generally much less controlled, and performance verification is typically conducted only when noticeable deficiencies are identified. The need to develop a methodology that would enable adequate diagnostics of the condition and determination of the degree of deviation from desired performance has led to an approach based on the combination of two non-invasive investigative methods: infrared imaging and heat flux measurement. When properly applied, these methods can accurately determine actual performance. This paper presents the application of an investigative procedure based on the combination of these methods in real life conditions, where various levels of deficiencies have been identified and quantified, having extremely negative consequences on the performance of buildings and compromising the basic comfort conditions for users.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Invited pa,p. 71-78
Open AccessNon-invasive methods for assessing the performance of architectural envelopes
Contemporary architectural practice is characterized by the pursuit of high levels of energy efficiency, which results in the application of complex calculation methods and performance simulations during the design of buildings. Simultaneously, the construction process and, especially, the certification of completed buildings are generally much less controlled, and performance verification is typically conducted only when noticeable deficiencies are identified. The need to develop a methodology that would enable adequate diagnostics of the condition and determination of the degree of deviation from desired performance has led to an approach based on the combination of two non-invasive investigative methods: infrared imaging and heat flux measurement. When properly applied, these methods can accurately determine actual performance. This paper presents the application of an investigative procedure based on the combination of these methods in real life conditions, where various levels of deficiencies have been identified and quantified, having extremely negative consequences on the performance of buildings and compromising the basic comfort conditions for users.
- Open Access
- 18 September 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (18) , 13884
Approaches for Complex and Integrated Refurbishment to Improve Energy Efficiency and Spatial Comfort of the Existing Post-War Mass Housing Stock in Serbia
The research presents approaches to the complex refurbishment of multi-family buildings constructed during the mass construction period in Serbia. These buildings comprise a quarter of Serbia’s housing stock, are characterized by high energy consumption for heating, and have major spatial and organizational deficiencies: small apartments, outdated and inflexible spatial organization, and the absence of elevators. The subject of the research is the application of the methodology of complex and integrated refurbishment by adding volume to existing multi-family buildings with the goal of achieving higher energy efficiency while remodeling and modernizing residential units and improving vertical building communications. The research presents a comparative analysis of the energy performance and spatial organization of the existing building and three variants of building improvement: Case 1 (without volumetric additions), Case 2 (with volumetric additions—relocating vertical communications), and Case 3 (with volumetric additions—expanding usable living space). Based on the Knaufterm simulations, the energy savings for heating energy consumption compared to the existing state are 81% in Case 1, 89% in Case 2, and 87% in Case 3. Based on predefined parameters of spatial comfort, a comparative analysis of spatial comfort in residential units was conducted for all three improvement variants.
- 18 September 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (18) , 13884
Open AccessApproaches for Complex and Integrated Refurbishment to Improve Energy Efficiency and Spatial Comfort of the Existing Post-War Mass Housing Stock in Serbia
The research presents approaches to the complex refurbishment of multi-family buildings constructed during the mass construction period in Serbia. These buildings comprise a quarter of Serbia’s housing stock, are characterized by high energy consumption for heating, and have major spatial and organizational deficiencies: small apartments, outdated and inflexible spatial organization, and the absence of elevators. The subject of the research is the application of the methodology of complex and integrated refurbishment by adding volume to existing multi-family buildings with the goal of achieving higher energy efficiency while remodeling and modernizing residential units and improving vertical building communications. The research presents a comparative analysis of the energy performance and spatial organization of the existing building and three variants of building improvement: Case 1 (without volumetric additions), Case 2 (with volumetric additions—relocating vertical communications), and Case 3 (with volumetric additions—expanding usable living space). Based on the Knaufterm simulations, the energy savings for heating energy consumption compared to the existing state are 81% in Case 1, 89% in Case 2, and 87% in Case 3. Based on predefined parameters of spatial comfort, a comparative analysis of spatial comfort in residential units was conducted for all three improvement variants.
- Open Access
- 30 June 2023
- Published by Springer Nature
- p. 843-852
Challenges and Potentials of Green Roof Retrofit: A Case Study
Green roofs are becoming common practice in building new public buildings and are considered the roofs for the future since they address the issue of energy and environment simultaneously, providing social, environmental and economic benefits. Despite these benefits, retrofitting an existing building with a green roof is not widely practiced. Undergoing such a project is no small task since it requires a thorough investigation of existing building's constraints, functional, material, and technological to even begin considering design options. Therefore, this process requires specific, case-sensitive approach, especially with the aim of improving the building’s energy performance. This paper presents a methodological approach and design proposals of a green roof retrofit project, through a case study of Belgrade’s “City Housing” building. This retrofit project presents an interesting research topic since it incorporates three distinct roofs, of all of different types, different ways of accessibility and levels of privacy, varying top-to-bottom from a simple extensive roof through a semi-public semi/intensive roof garden to a ground-level public park with trees and intensive vegetation. Also, since this building provides socially significant services, it is frequently visited by general public which presents a potential for introducing educational and demonstration elements in the retrofit project, not only the functional and technological ones. That way, this project can be a showcase example, promoting greening the roofs of Belgrade’s existing public buildings as a way of improving their energy performance.
- 30 June 2023
- Published by Springer Nature
- p. 843-852
Open AccessChallenges and Potentials of Green Roof Retrofit: A Case Study
Green roofs are becoming common practice in building new public buildings and are considered the roofs for the future since they address the issue of energy and environment simultaneously, providing social, environmental and economic benefits. Despite these benefits, retrofitting an existing building with a green roof is not widely practiced. Undergoing such a project is no small task since it requires a thorough investigation of existing building's constraints, functional, material, and technological to even begin considering design options. Therefore, this process requires specific, case-sensitive approach, especially with the aim of improving the building’s energy performance. This paper presents a methodological approach and design proposals of a green roof retrofit project, through a case study of Belgrade’s “City Housing” building. This retrofit project presents an interesting research topic since it incorporates three distinct roofs, of all of different types, different ways of accessibility and levels of privacy, varying top-to-bottom from a simple extensive roof through a semi-public semi/intensive roof garden to a ground-level public park with trees and intensive vegetation. Also, since this building provides socially significant services, it is frequently visited by general public which presents a potential for introducing educational and demonstration elements in the retrofit project, not only the functional and technological ones. That way, this project can be a showcase example, promoting greening the roofs of Belgrade’s existing public buildings as a way of improving their energy performance.
- Open Access
- 30 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4074
Energy Refurbishment of Serbian School Building Stock—A Typology Tool Methodology Development
Energy refurbishment of school buildings is a priority regarding both energy consumption in buildings and improving comfort conditions for sensitive young occupants. During 2016–18, a group of teachers and associates from the Faculty of Architecture, Mechanical Engineering, and Electrical Engineering from the University in Belgrade participated in the project “Energy efficiency in public buildings” in cooperation with GIZ (Deutsche Gesellschaft für Internationale Zusammenarbeit), University of Belgrade, Faculty of Architecture and Ministry of Mining and Energy of the Republic of Serbia. During 2016 and 2017, a comprehensive survey and database of public buildings were conducted by the local community. The focus of the research was the facilities of children’s institutions, and detailed data were collected to determine the current building stock conditions, energy consumption, and possible improvements. This paper presents the methodology of the project based on defining the typology of buildings, determining the representatives of the characteristic periods of construction, and analyzing their energy performance. Five possible scenarios were considered: designed condition, existing state, and three levels of a building improvement. The main goal of this project was to ascertain the entire fund for school buildings, indicate the potential for energy savings of this type of public building at the national level, and use this as a starting point for developing strategic decisions and further energy efficiency policies. This paper presents the complete results of the research on school buildings in Serbia, their energy performance, and possible energy savings. Key findings show that a great majority of schools are in a poor state in terms of their energy efficiency, but at the same time, there is a large potential for improvement of building envelope, HVAC, and lighting systems, which can cut the current energy need for heating to up to 80%.
- 30 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4074
Open AccessEnergy Refurbishment of Serbian School Building Stock—A Typology Tool Methodology Development
Energy refurbishment of school buildings is a priority regarding both energy consumption in buildings and improving comfort conditions for sensitive young occupants. During 2016–18, a group of teachers and associates from the Faculty of Architecture, Mechanical Engineering, and Electrical Engineering from the University in Belgrade participated in the project “Energy efficiency in public buildings” in cooperation with GIZ (Deutsche Gesellschaft für Internationale Zusammenarbeit), University of Belgrade, Faculty of Architecture and Ministry of Mining and Energy of the Republic of Serbia. During 2016 and 2017, a comprehensive survey and database of public buildings were conducted by the local community. The focus of the research was the facilities of children’s institutions, and detailed data were collected to determine the current building stock conditions, energy consumption, and possible improvements. This paper presents the methodology of the project based on defining the typology of buildings, determining the representatives of the characteristic periods of construction, and analyzing their energy performance. Five possible scenarios were considered: designed condition, existing state, and three levels of a building improvement. The main goal of this project was to ascertain the entire fund for school buildings, indicate the potential for energy savings of this type of public building at the national level, and use this as a starting point for developing strategic decisions and further energy efficiency policies. This paper presents the complete results of the research on school buildings in Serbia, their energy performance, and possible energy savings. Key findings show that a great majority of schools are in a poor state in terms of their energy efficiency, but at the same time, there is a large potential for improvement of building envelope, HVAC, and lighting systems, which can cut the current energy need for heating to up to 80%.
- Open Access
- 1 December 2021
- Published by University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy
- No. 15,p. 160-169
ENERGY EFFICIENT REFURBISHMENT OF MUNICIPAL PUBLIC BUILDINGS IN BELGRADE, SERBIA
The paper presents the methodological approach for improvement of energy performance of public buildings in the process of partial refurbishment, having in mind the constrains that are originating from existing technological, material and stylistic characteristics. Being the carriers of wider social and historical connotations, these buildings are often under the certain level of protection as the parts of the cultural heritage making the process of improvement a complex one. For this reason, an improvement path algorithm has been defined and consequently tested on two representative cases investigating the boundaries, possibilities and outcomes of the energy refurbishment procedures.
- 1 December 2021
- Published by University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy
- No. 15,p. 160-169
Open AccessENERGY EFFICIENT REFURBISHMENT OF MUNICIPAL PUBLIC BUILDINGS IN BELGRADE, SERBIA
The paper presents the methodological approach for improvement of energy performance of public buildings in the process of partial refurbishment, having in mind the constrains that are originating from existing technological, material and stylistic characteristics. Being the carriers of wider social and historical connotations, these buildings are often under the certain level of protection as the parts of the cultural heritage making the process of improvement a complex one. For this reason, an improvement path algorithm has been defined and consequently tested on two representative cases investigating the boundaries, possibilities and outcomes of the energy refurbishment procedures.
- Open Access
- 12 April 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (8) , 4262
Methodology for Residential Building Stock Refurbishment Planning—Development of Local Building Typologies
This paper presents the methodology for the implementation of building typology principles as a tool for the strategic planning of residential building stock energy retrofits on a municipal level in Serbia. Research was conducted under the IEE EPISCOPE (Intelligent Energy Europe EPISCOPE/TABULA project) project with the aim of developing an adequate tool for creating building stock energy retrofit management strategies on a local level. An approach that envisions the diversity and uneven spatial distribution of building stock in smaller scale municipalities and includes statistically relevant sampling of all relevant building types was developed and tested in the pilot project that focused on the city of Vršac. Two options for local typology development were formulated: a top-down approach, which relies on the data from the national typology or other available databases by reducing them to the local level, and a bottom-up approach, which represents a new data gathering and processing method. Both approaches were tested in the pilot project and the results are compared in this paper. From the conclusions of these analyses, a common methodology for the development of local building typologies has been defined. It can be used in the strategic planning of building stock, whether for the purpose of developing local energy action plans (LEAPs) or other purposes internationally.
- 12 April 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (8) , 4262
Open AccessMethodology for Residential Building Stock Refurbishment Planning—Development of Local Building Typologies
This paper presents the methodology for the implementation of building typology principles as a tool for the strategic planning of residential building stock energy retrofits on a municipal level in Serbia. Research was conducted under the IEE EPISCOPE (Intelligent Energy Europe EPISCOPE/TABULA project) project with the aim of developing an adequate tool for creating building stock energy retrofit management strategies on a local level. An approach that envisions the diversity and uneven spatial distribution of building stock in smaller scale municipalities and includes statistically relevant sampling of all relevant building types was developed and tested in the pilot project that focused on the city of Vršac. Two options for local typology development were formulated: a top-down approach, which relies on the data from the national typology or other available databases by reducing them to the local level, and a bottom-up approach, which represents a new data gathering and processing method. Both approaches were tested in the pilot project and the results are compared in this paper. From the conclusions of these analyses, a common methodology for the development of local building typologies has been defined. It can be used in the strategic planning of building stock, whether for the purpose of developing local energy action plans (LEAPs) or other purposes internationally.
- Open Access
- 17 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6) , 2691
Sustainable Modularity Approach to Facilities Development Based on Geothermal Energy Potential
The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy.
- 17 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6) , 2691
Open AccessSustainable Modularity Approach to Facilities Development Based on Geothermal Energy Potential
The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy.
- 1 January 2020
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in SAJ - Serbian Architectural Journal
- Vol. 12 (3) , 293-314
Energy rehabilitation of existing buildings: Design studio
This paper presents the methodology and results of design studio whose main topic is sustainability, specifically relating to existing building energy refurbishment, at the postgraduate level - specialist academic studies - Energy efficient and green architecture at the University of Belgrade-Faculty of Architecture. Weaknesses and opportunities in teaching sustainability in a design studio are discussed. It points to concrete challenges that the theme of building energy conservation and refurbishment present, and to ways in which they might be integrated in education. This paper considers how the design studio pedagogy could encourage deep and active learning for sustainable design in an attempt to expand the role of the architect to be more responsive to the environmental needs of contemporary society. Methodology of this studio uses the approach of project-oriented learning by simulating a real-life multidisciplinary project development environment. Three phases of design development are described as: research phase, refurbishment phase and redesign phase. It starts with the research phase, which is developed in parallel with the refurbishment phase. This is because the refurbishment process in this studio is not just limited to the technical aspects of energy efficiency improvement, verified through calculations and simulations. Several design scenarios are developed, examining the minimal, optimal and maximal range of energy efficiency improvements in technical systems and building thermal envelope. Analysis of these scenarios, but also analysis of a much wider spectre of aspects influencing the refurbishment design, results in a final redesign proposal which is a comprehensive, deep refurbishment proposal, tackling not only energy (under)performance, but also possibilities for upgrade of functional, technical and aesthetical aspects of existing building.
- 1 January 2020
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in SAJ - Serbian Architectural Journal
- Vol. 12 (3) , 293-314
Energy rehabilitation of existing buildings: Design studio
This paper presents the methodology and results of design studio whose main topic is sustainability, specifically relating to existing building energy refurbishment, at the postgraduate level - specialist academic studies - Energy efficient and green architecture at the University of Belgrade-Faculty of Architecture. Weaknesses and opportunities in teaching sustainability in a design studio are discussed. It points to concrete challenges that the theme of building energy conservation and refurbishment present, and to ways in which they might be integrated in education. This paper considers how the design studio pedagogy could encourage deep and active learning for sustainable design in an attempt to expand the role of the architect to be more responsive to the environmental needs of contemporary society. Methodology of this studio uses the approach of project-oriented learning by simulating a real-life multidisciplinary project development environment. Three phases of design development are described as: research phase, refurbishment phase and redesign phase. It starts with the research phase, which is developed in parallel with the refurbishment phase. This is because the refurbishment process in this studio is not just limited to the technical aspects of energy efficiency improvement, verified through calculations and simulations. Several design scenarios are developed, examining the minimal, optimal and maximal range of energy efficiency improvements in technical systems and building thermal envelope. Analysis of these scenarios, but also analysis of a much wider spectre of aspects influencing the refurbishment design, results in a final redesign proposal which is a comprehensive, deep refurbishment proposal, tackling not only energy (under)performance, but also possibilities for upgrade of functional, technical and aesthetical aspects of existing building.