Ying Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ying Tan has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
- Xiaopeng Pei
Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou 325000, China
14 shared publications - Kun Xu
Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, PR China
9 shared publications Pixin Wang
Chinese Acad Sci, Changchun Inst Appl Chem, Key Lab Polymer Ecomat, Changchun 130022, Peoples R China
9 shared publicationsChao Wang
Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, PR China; University of Science and Technology of China, Hefei 230026, PR China
7 shared publicationsKankan Zhai
Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, PR China; University of Science and Technology of China, Hefei 230026, PR China
7 shared publications- Pixin Wang
Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, PR China
7 shared publications
Latest Publications
Achieving High Capacity in Nickel‐Rich Cathodes via Low‐Voltage Lithium Storage Expansion
Lithium‐excess configurations accessed at low cutoff voltages in nickel‐rich layered oxides offer a promising route to increasing cathode capacity but are typically accompanied by rapid performance degradation and poor cycling stability. To address this challenge, we propose a constant‐capacity (CCap) protocol that fixes the discharge capacity at a prescribed value. By selectively accessing the low‐voltage lithium‐storage reservoir while limiting the extent of lithiation below the stoichiometric threshold, this strategy suppresses uncontrolled deep lithiation and mitigates structural degradation. Li||NCM811 half‐cells achieve extended cycling stability, delivering up to 300, 500, and 600 cycles at 100%, 90%, and 80% capacity retention, respectively. X‐ray diffraction analysis reveals that capacity extension during cycling originates from the low‐voltage regime through the formation of a Li 2 ‐NCM811 phase, which enables high‐capacity output. Although the average discharge voltage decreases, the average energy density under specific discharge cycles is approximately 10% higher than that achieved with conventional voltage‐controlled cycling at the same cycle number. Notably, Li||NCM811 full cells operated at a negative‐to‐positive capacity ratio of 4 retain full capacity over 200 cycles while maintaining a higher energy density than that obtained under standard cycling conditions for up to 180 cycles.
Achieving High Capacity in Nickel‐Rich Cathodes via Low‐Voltage Lithium Storage Expansion
Lithium‐excess configurations accessed at low cutoff voltages in nickel‐rich layered oxides offer a promising route to increasing cathode capacity but are typically accompanied by rapid performance degradation and poor cycling stability. To address this challenge, we propose a constant‐capacity (CCap) protocol that fixes the discharge capacity at a prescribed value. By selectively accessing the low‐voltage lithium‐storage reservoir while limiting the extent of lithiation below the stoichiometric threshold, this strategy suppresses uncontrolled deep lithiation and mitigates structural degradation. Li||NCM811 half‐cells achieve extended cycling stability, delivering up to 300, 500, and 600 cycles at 100%, 90%, and 80% capacity retention, respectively. X‐ray diffraction analysis reveals that capacity extension during cycling originates from the low‐voltage regime through the formation of a Li 2 ‐NCM811 phase, which enables high‐capacity output. Although the average discharge voltage decreases, the average energy density under specific discharge cycles is approximately 10% higher than that achieved with conventional voltage‐controlled cycling at the same cycle number. Notably, Li||NCM811 full cells operated at a negative‐to‐positive capacity ratio of 4 retain full capacity over 200 cycles while maintaining a higher energy density than that obtained under standard cycling conditions for up to 180 cycles.
- 16 May 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (11) , 5658-5667
Solvation Engineering to Break the Solubility–Stability Trade-Off in LiNO 3 -Based Electrolytes for High-Voltage Lithium Metal Batteries
Lithium nitrate (LiNO3) can be preferentially reduced on Li metal to induce an inorganic-rich solid–electrolyte interphase (SEI) (e.g., Li2O/Li3N), making it an effective handle to regulate Li-metal interfacial chemistry. However, the extremely low solubility of LiNO3 in conventional low-donor-number carbonate electrolytes prevents LiNO3 from evolving beyond an additive, whereas high-donor-number solvents that dissolve LiNO3 typically suffer from insufficient oxidative stability at high voltages, limiting their compatibility with Ni-rich cathodes (e.g., NCM811). Herein, we developed a LiNO3-based electrolyte that simultaneously delivers high-voltage stability and high LiNO3 solubility via synergistic anion-coordination regulation using an oxazolidinone solvation platform, a tunable cosolvent, and a fluorinated dilution. Specifically, the introduction of TTE (1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether) increases the fraction of anion-paired species and strengthens NO3– coordination in the solvation sheath. This solvation reconstruction promotes the transition from monodentate to bidentate NO3– coordination, thereby favoring nitrate-derived interfacial reduction. The optimized electrolyte enables >3000 h stability in Li||Li symmetric cells, 97.64% average Coulombic efficiency (CE) in Li||Cu cells, and 83.44% capacity retention after 500 cycles at 4.3 V (1C) in Li||NCM811 cells, offering a practical design paradigm for LiNO3 electrolytes that combine high solubility with high-voltage stability.
- 16 May 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (11) , 5658-5667
Solvation Engineering to Break the Solubility–Stability Trade-Off in LiNO 3 -Based Electrolytes for High-Voltage Lithium Metal Batteries
Lithium nitrate (LiNO3) can be preferentially reduced on Li metal to induce an inorganic-rich solid–electrolyte interphase (SEI) (e.g., Li2O/Li3N), making it an effective handle to regulate Li-metal interfacial chemistry. However, the extremely low solubility of LiNO3 in conventional low-donor-number carbonate electrolytes prevents LiNO3 from evolving beyond an additive, whereas high-donor-number solvents that dissolve LiNO3 typically suffer from insufficient oxidative stability at high voltages, limiting their compatibility with Ni-rich cathodes (e.g., NCM811). Herein, we developed a LiNO3-based electrolyte that simultaneously delivers high-voltage stability and high LiNO3 solubility via synergistic anion-coordination regulation using an oxazolidinone solvation platform, a tunable cosolvent, and a fluorinated dilution. Specifically, the introduction of TTE (1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether) increases the fraction of anion-paired species and strengthens NO3– coordination in the solvation sheath. This solvation reconstruction promotes the transition from monodentate to bidentate NO3– coordination, thereby favoring nitrate-derived interfacial reduction. The optimized electrolyte enables >3000 h stability in Li||Li symmetric cells, 97.64% average Coulombic efficiency (CE) in Li||Cu cells, and 83.44% capacity retention after 500 cycles at 4.3 V (1C) in Li||NCM811 cells, offering a practical design paradigm for LiNO3 electrolytes that combine high solubility with high-voltage stability.
- 11 March 2026
- Published by Elsevier in Acta Biomaterialia
- Vol. 214, 557-571
Biomimetic zwitterionic micelles for efficient mucus penetration and pulmonary targeting in acute lung injury
- 11 March 2026
- Published by Elsevier in Acta Biomaterialia
- Vol. 214, 557-571
Biomimetic zwitterionic micelles for efficient mucus penetration and pulmonary targeting in acute lung injury
- 19 February 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 351, 151026
Engineering carboxymethyl chitosan/dialdehyde starch hydrogel as a therapeutic platform for immuno-microbial modulation in ulcerative colitis
- 19 February 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 351, 151026
Engineering carboxymethyl chitosan/dialdehyde starch hydrogel as a therapeutic platform for immuno-microbial modulation in ulcerative colitis
- 13 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (7) , 11073-11087
Orally Targeted Cellulose Acetate Butyrate Nanocarriers Serve as a Butyrate Prodrug and Quercetin Delivery Platform for Synergistic Microbiota-Modulated Colitis Therapy
While oral administration offers distinct advantages for the treatment of ulcerative colitis (UC), its efficacy is often limited by poor drug targeting and the disease's multifactorial pathology. Herein, we report an orally bioavailable nanotherapeutic system, CAB@Que, in which cellulose acetate butyrate (CAB) functions not merely as a delivery vehicle for quercetin (Que) but as a colon-specific butyrate prodrug, enabling synergistic and targeted therapy of UC. The CAB nanocarrier itself exhibits intrinsic therapeutic activity: upon reaching the inflamed colon, its butyryl side chains undergo hydrolysis triggered by colonic alkaline pH and microbial esterases to release butyrate, while residual polymer fragments are further fermented by commensal microbiota to generate additional short-chain fatty acids (SCFAs). This dual-source SCFA supplement actively supports epithelial energy metabolism and mucosal healing. Meanwhile, Que is coreleased to exert potent anti-inflammatory and antioxidant effects. In a murine colitis model, CAB@Que demonstrated superior efficacy over free Que, blank CAB, or their physical mixture, significantly ameliorating clinical symptoms, restoring epithelial barrier integrity, alleviating systemic oxidative stress, and re-establishing gut microbial homeostasis. By integrating carrier-mediated butyrate prodrug action with payload-driven immunomodulation, the CAB@Que platform enables precise, holistic intervention across the "microbiota-mucosa-immune" axis, offering a rationally designed oral strategy for synergistic UC therapy.
- 13 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (7) , 11073-11087
Orally Targeted Cellulose Acetate Butyrate Nanocarriers Serve as a Butyrate Prodrug and Quercetin Delivery Platform for Synergistic Microbiota-Modulated Colitis Therapy
While oral administration offers distinct advantages for the treatment of ulcerative colitis (UC), its efficacy is often limited by poor drug targeting and the disease's multifactorial pathology. Herein, we report an orally bioavailable nanotherapeutic system, CAB@Que, in which cellulose acetate butyrate (CAB) functions not merely as a delivery vehicle for quercetin (Que) but as a colon-specific butyrate prodrug, enabling synergistic and targeted therapy of UC. The CAB nanocarrier itself exhibits intrinsic therapeutic activity: upon reaching the inflamed colon, its butyryl side chains undergo hydrolysis triggered by colonic alkaline pH and microbial esterases to release butyrate, while residual polymer fragments are further fermented by commensal microbiota to generate additional short-chain fatty acids (SCFAs). This dual-source SCFA supplement actively supports epithelial energy metabolism and mucosal healing. Meanwhile, Que is coreleased to exert potent anti-inflammatory and antioxidant effects. In a murine colitis model, CAB@Que demonstrated superior efficacy over free Que, blank CAB, or their physical mixture, significantly ameliorating clinical symptoms, restoring epithelial barrier integrity, alleviating systemic oxidative stress, and re-establishing gut microbial homeostasis. By integrating carrier-mediated butyrate prodrug action with payload-driven immunomodulation, the CAB@Que platform enables precise, holistic intervention across the "microbiota-mucosa-immune" axis, offering a rationally designed oral strategy for synergistic UC therapy.
- 17 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (17) , 25337-25347
Multifunctional Additive for Electrolyte Stabilization and Electrode/Electrolyte Interphase Regulation in High-Voltage Lithium Metal Batteries
Lithium-metal batteries (LMBs) incorporating nickel-rich cathodes have the potential to achieve superior energy densities. However, challenges associated with the electrolyte-electrode interphases (EEIs) have impeded the successful transition of these advanced systems into practical applications. In this study, azidotrimethylsilane (ATMS) is introduced as a multifunctional additive for traditional carbonate-based electrolytes. The azido group in ATMS plays a dual role in electrochemical reactions, with multiple nitrogen (N) atoms engaging in both nucleophilic and electrophilic interactions. These N atoms tend to undergo preferential oxidation reactions at the cathode, forming a stable cathode electrolyte interphase, while also undergoing preferential reduction reactions at the anode to inhibit lithium dendrite growth. The Si-N bond in the ATMS structure has unique reactivity, effectively neutralizing HF produced from LiPF6 decomposition, thus preventing the recurrent formation of EEIs in the battery. As a result, the long-cycle performance of Li||NCM811 is significantly improved, with capacity retention increasing from 34.7% in baseline electrolyte to 82.6% after 600 cycles. Similarly, ATMS enhances the cycling performance of Li||Li symmetric cells, extending their lifespan to over 800 h, and improves the Coulombic efficiency of Li||Cu cells from 81.6 to 91.6%. The synergistic effect of ATMS on both anodes and cathodes further significantly enhances the high-voltage performance of the LMBs.
- 17 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (17) , 25337-25347
Multifunctional Additive for Electrolyte Stabilization and Electrode/Electrolyte Interphase Regulation in High-Voltage Lithium Metal Batteries
Lithium-metal batteries (LMBs) incorporating nickel-rich cathodes have the potential to achieve superior energy densities. However, challenges associated with the electrolyte-electrode interphases (EEIs) have impeded the successful transition of these advanced systems into practical applications. In this study, azidotrimethylsilane (ATMS) is introduced as a multifunctional additive for traditional carbonate-based electrolytes. The azido group in ATMS plays a dual role in electrochemical reactions, with multiple nitrogen (N) atoms engaging in both nucleophilic and electrophilic interactions. These N atoms tend to undergo preferential oxidation reactions at the cathode, forming a stable cathode electrolyte interphase, while also undergoing preferential reduction reactions at the anode to inhibit lithium dendrite growth. The Si-N bond in the ATMS structure has unique reactivity, effectively neutralizing HF produced from LiPF6 decomposition, thus preventing the recurrent formation of EEIs in the battery. As a result, the long-cycle performance of Li||NCM811 is significantly improved, with capacity retention increasing from 34.7% in baseline electrolyte to 82.6% after 600 cycles. Similarly, ATMS enhances the cycling performance of Li||Li symmetric cells, extending their lifespan to over 800 h, and improves the Coulombic efficiency of Li||Cu cells from 81.6 to 91.6%. The synergistic effect of ATMS on both anodes and cathodes further significantly enhances the high-voltage performance of the LMBs.
- 19 March 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (4) , 1-17
Chemical modification of starch-based nanoparticles for Pickering emulsions: a review
- 19 March 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (4) , 1-17
Chemical modification of starch-based nanoparticles for Pickering emulsions: a review
- 13 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (17) , 12471-12481
A fluorinated bifunctional additive achieving stable electrode/electrolyte interfaces for high-voltage lithium-metal batteries
Nickel-rich ternary cathodes are highly favored for lithium metal batteries due to their high energy density and operating voltage. However, challenges such as interfacial side reactions, thermal instability, and capacity degradation persist at high temperatures and elevated cut-off voltages. To address these issues, we developed a novel fluorine-containing additive, 1-methyl-3-(2,2,2-trifluoroethyl)-1,3-dihydro-2H-imidazol-2-one (M-3FEn-IO), specifically tailored for high-voltage lithium-metal batteries. Structurally analogous to the film-forming agent vinylene carbonate, M-3FEn-IO substitutes an oxygen atom with nitrogen and introduces fluorine groups at nitrogen sites, ensuring effective film formation on both electrodes. The fluorine-derived lithium fluoride (LiF) generated by M-3FEn-IO strengthens the electrode/electrolyte interfaces, markedly improving cell cycling performance. Incorporating 0.2 vol% M-3FEn-IO into carbonate-based electrolytes improved Li‖NCM622 cells, achieving 84.07% capacity retention after 600 cycles at 30 °C and 73.8% at 60 °C and a 2C rate. This work establishes a multifunctional electrolyte additive strategy to advance lithium metal battery performance.
- 13 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (17) , 12471-12481
A fluorinated bifunctional additive achieving stable electrode/electrolyte interfaces for high-voltage lithium-metal batteries
Nickel-rich ternary cathodes are highly favored for lithium metal batteries due to their high energy density and operating voltage. However, challenges such as interfacial side reactions, thermal instability, and capacity degradation persist at high temperatures and elevated cut-off voltages. To address these issues, we developed a novel fluorine-containing additive, 1-methyl-3-(2,2,2-trifluoroethyl)-1,3-dihydro-2H-imidazol-2-one (M-3FEn-IO), specifically tailored for high-voltage lithium-metal batteries. Structurally analogous to the film-forming agent vinylene carbonate, M-3FEn-IO substitutes an oxygen atom with nitrogen and introduces fluorine groups at nitrogen sites, ensuring effective film formation on both electrodes. The fluorine-derived lithium fluoride (LiF) generated by M-3FEn-IO strengthens the electrode/electrolyte interfaces, markedly improving cell cycling performance. Incorporating 0.2 vol% M-3FEn-IO into carbonate-based electrolytes improved Li‖NCM622 cells, achieving 84.07% capacity retention after 600 cycles at 30 °C and 73.8% at 60 °C and a 2C rate. This work establishes a multifunctional electrolyte additive strategy to advance lithium metal battery performance.
- 5 February 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (11) , 2823-2845
Biodegradable microbeads for personal care products and cosmetics
The materials, preparation methods, properties, and applications of biodegradable microbeads in personal care products and cosmetics.
- 5 February 2025
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 27 (11) , 2823-2845
Biodegradable microbeads for personal care products and cosmetics
The materials, preparation methods, properties, and applications of biodegradable microbeads in personal care products and cosmetics.