XPXiaopeng Pei

Xiaopeng Pei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaopeng Pei has a total of 72 co-authors. Here are the top co-authors by number of shared publications:

  • Ying Tan

    Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou 325000, China

    14 shared publications
  • Pixin Wang

    Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, PR China

    5 shared publications
  • Yating Zhou

    Wenzhou Key Laboratory of Biophysics, Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou 325000, China

    5 shared publications
  • Hua Zhou

    Wenzhou Key Laboratory of Biophysics, Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou 325000, China

    4 shared publications
  • Kankan Zhai

    Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry , Chinese Academy of Sciences , Changchun 130022 , PR China

    4 shared publications
  • Kun Xu

    Key Laboratory of Polymer Ecomaterials, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, PR China

    4 shared publications

Latest Publications

  • Achieving High Capacity in Nickel‐Rich Cathodes via Low‐Voltage Lithium Storage Expansion

    by Junliang Du, Mengqi Wang, Yuxin Du, Yongqi Pan, Hengwei Tian, Guirong Yang, Xiaopeng Pei, Ying Tan

    Lithium‐excess configurations accessed at low cutoff voltages in nickel‐rich layered oxides offer a promising route to increasing cathode capacity but are typically accompanied by rapid performance degradation and poor cycling stability. To address this challenge, we propose a constant‐capacity (CCap) protocol that fixes the discharge capacity at a prescribed value. By selectively accessing the low‐voltage lithium‐storage reservoir while limiting the extent of lithiation below the stoichiometric threshold, this strategy suppresses uncontrolled deep lithiation and mitigates structural degradation. Li||NCM811 half‐cells achieve extended cycling stability, delivering up to 300, 500, and 600 cycles at 100%, 90%, and 80% capacity retention, respectively. X‐ray diffraction analysis reveals that capacity extension during cycling originates from the low‐voltage regime through the formation of a Li 2 ‐NCM811 phase, which enables high‐capacity output. Although the average discharge voltage decreases, the average energy density under specific discharge cycles is approximately 10% higher than that achieved with conventional voltage‐controlled cycling at the same cycle number. Notably, Li||NCM811 full cells operated at a negative‐to‐positive capacity ratio of 4 retain full capacity over 200 cycles while maintaining a higher energy density than that obtained under standard cycling conditions for up to 180 cycles.

  • Solvation Engineering to Break the Solubility–Stability Trade-Off in LiNO 3 -Based Electrolytes for High-Voltage Lithium Metal Batteries

    by Mengqi Wang, Junliang Du, Yuxin Du, Yongqi Pan, Hengwei Tian, Penghui Yang, Xiaopeng Pei, Ying Tan

    Lithium nitrate (LiNO3) can be preferentially reduced on Li metal to induce an inorganic-rich solid–electrolyte interphase (SEI) (e.g., Li2O/Li3N), making it an effective handle to regulate Li-metal interfacial chemistry. However, the extremely low solubility of LiNO3 in conventional low-donor-number carbonate electrolytes prevents LiNO3 from evolving beyond an additive, whereas high-donor-number solvents that dissolve LiNO3 typically suffer from insufficient oxidative stability at high voltages, limiting their compatibility with Ni-rich cathodes (e.g., NCM811). Herein, we developed a LiNO3-based electrolyte that simultaneously delivers high-voltage stability and high LiNO3 solubility via synergistic anion-coordination regulation using an oxazolidinone solvation platform, a tunable cosolvent, and a fluorinated dilution. Specifically, the introduction of TTE (1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether) increases the fraction of anion-paired species and strengthens NO3– coordination in the solvation sheath. This solvation reconstruction promotes the transition from monodentate to bidentate NO3– coordination, thereby favoring nitrate-derived interfacial reduction. The optimized electrolyte enables >3000 h stability in Li||Li symmetric cells, 97.64% average Coulombic efficiency (CE) in Li||Cu cells, and 83.44% capacity retention after 500 cycles at 4.3 V (1C) in Li||NCM811 cells, offering a practical design paradigm for LiNO3 electrolytes that combine high solubility with high-voltage stability.

  • Multifunctional Additive for Electrolyte Stabilization and Electrode/Electrolyte Interphase Regulation in High-Voltage Lithium Metal Batteries

    by Heyuan Sun, Yue Dong, Kai Zhang, Lu Gao, Xiujuan Chen, Xiaopeng Pei, Ying Tan

    Lithium-metal batteries (LMBs) incorporating nickel-rich cathodes have the potential to achieve superior energy densities. However, challenges associated with the electrolyte-electrode interphases (EEIs) have impeded the successful transition of these advanced systems into practical applications. In this study, azidotrimethylsilane (ATMS) is introduced as a multifunctional additive for traditional carbonate-based electrolytes. The azido group in ATMS plays a dual role in electrochemical reactions, with multiple nitrogen (N) atoms engaging in both nucleophilic and electrophilic interactions. These N atoms tend to undergo preferential oxidation reactions at the cathode, forming a stable cathode electrolyte interphase, while also undergoing preferential reduction reactions at the anode to inhibit lithium dendrite growth. The Si-N bond in the ATMS structure has unique reactivity, effectively neutralizing HF produced from LiPF6 decomposition, thus preventing the recurrent formation of EEIs in the battery. As a result, the long-cycle performance of Li||NCM811 is significantly improved, with capacity retention increasing from 34.7% in baseline electrolyte to 82.6% after 600 cycles. Similarly, ATMS enhances the cycling performance of Li||Li symmetric cells, extending their lifespan to over 800 h, and improves the Coulombic efficiency of Li||Cu cells from 81.6 to 91.6%. The synergistic effect of ATMS on both anodes and cathodes further significantly enhances the high-voltage performance of the LMBs.


  • A fluorinated bifunctional additive achieving stable electrode/electrolyte interfaces for high-voltage lithium-metal batteries

    by Lei Zeng, Lu Gao, Ting Ou, Yufan Xin, Junliang Du, Mengqi Wang, Yanshuang Meng, Xiaopeng Pei, Ying Tan

    Nickel-rich ternary cathodes are highly favored for lithium metal batteries due to their high energy density and operating voltage. However, challenges such as interfacial side reactions, thermal instability, and capacity degradation persist at high temperatures and elevated cut-off voltages. To address these issues, we developed a novel fluorine-containing additive, 1-methyl-3-(2,2,2-trifluoroethyl)-1,3-dihydro-2H-imidazol-2-one (M-3FEn-IO), specifically tailored for high-voltage lithium-metal batteries. Structurally analogous to the film-forming agent vinylene carbonate, M-3FEn-IO substitutes an oxygen atom with nitrogen and introduces fluorine groups at nitrogen sites, ensuring effective film formation on both electrodes. The fluorine-derived lithium fluoride (LiF) generated by M-3FEn-IO strengthens the electrode/electrolyte interfaces, markedly improving cell cycling performance. Incorporating 0.2 vol% M-3FEn-IO into carbonate-based electrolytes improved Li‖NCM622 cells, achieving 84.07% capacity retention after 600 cycles at 30 °C and 73.8% at 60 °C and a 2C rate. This work establishes a multifunctional electrolyte additive strategy to advance lithium metal battery performance.


  • Biodegradable microbeads for personal care products and cosmetics

    by Xianzhu You, Yating Zhou, Rongjiao Sun, Xiaopeng Pei, Hua Zhou, Da Deng, Zhiying Wang, Wanle Hu, Ying Tan

    The materials, preparation methods, properties, and applications of biodegradable microbeads in personal care products and cosmetics.


  • Arrays of Bowl‐Shaped Janus Particle Film with Structured Colors

    by Yating Zhou, Xianzhu You, Wenying Liu, Wei Yang, Xuru Jin, Xiaopeng Pei, Sheng Xiang, Hua Zhou, Zhiyong Liao, Ying Tan

    Structural colors generated via total internal reflection (TIR) using nanostructure‐free micro‐concave shapes have garnered increasing attention. However, the application of large micro‐concave structures for structural coloration remains limited. Herein, a flexibly tunable structural color film fabricated by casting polydimethylsiloxane (PDMS) on an array of large poly(glycidyl methacrylate) (PGMA) bowl‐shaped particles is reported. The resultant film exhibits tunable red to green structural colors with changing observation angles. Moreover, the color can be further tailored by altering the shape of the film itself. The incorporation of the PDMS layer not only facilitates a shift in the locus of TIR from the bottom surface to the top concave surface of the particles, thereby enabling the generation of structural color, but also confers enhanced flexibility to the film. Further decoration with silver nanoparticles imparts antimicrobial properties, yielding a novel antimicrobial coating material with structural colors. The simple and cost‐effective strategy for the production of structural color films provides potential applications in antimicrobial coatings, enabling accessible and customizable structural coloration using big‐size micro‐concave particles.


  • Rational Design of Vinylene Carbonate-Inspired 1,3-Dimethyl-1H-imidazol-2(3H)-one Additives to Stabilize High-Voltage Lithium Metal Batteries

    by Jingtang Wang, Ting Ou, Lu Gao, Lei Zeng, Heyuan Sun, Yong Hu, Xiaopeng Pei, Ying Tan

    Lithium metal batteries (LMBs) employing high-voltage nickel-rich cathodes represent a promising strategy to enable higher energy density storage systems. However, instability at the electrolyte-electrode interfaces (EEIs) currently impedes the translation of these advanced systems into practical applications. Herein, 1,3-dimethyl-1H-imidazol-2(3H)-one (DMIO), integrating structural features of vinylene carbonate (VC) while substituting oxygen with electron-donating nitrogen, has been synthesized and validated as a multifunctional electrolyte additive for high-voltage LMBs. Theoretical calculations and experimental results demonstrate that the potent electron-donating nitrogen in DMIO enables preferential DMIO oxidation at the cathode while preserving its carbon-carbon double bond for a concomitant reduction on the anode. Thereby, robust DMIO-derived EEIs are generated, reinforcing cycling in the full cells. Additionally, DMIO leverages Lewis acid-based interactions to coordinate and sequester protons from acidic LiPF6 decomposition byproducts, concurrently retarding LiPF6 hydrolysis while attenuating parasitic consumption of EEIs by acidic species. Consequently, incorporating DMIO into conventional carbonate electrolytes enables an improved capacity retention of Li||NCM622 cells to 81% versus 26% in the baseline electrolyte after 600 cycles. Similarly, DMIO improves Li anode cycling performance, displaying extended life spans over 200 h in Li||Li symmetric cells and enhancing Coulombic efficiency from 76% to 88% in Li||Cu cells. The synergistic effects of DMIO on both the cathode and anode lead to substantially improved cell lifetime. This rationally designed, multifunctional electrolyte additive paradigm provides vital insights that can be translatable to further electrolyte molecular engineering strategies.


  • Green fabrication of PHBV microbeads using a dimethyl isosorbide solvent for skin exfoliators

    by Xianzhu You, Yating Zhou, Xuru Jin, Sheng Xiang, Xiaopeng Pei, Hua Zhou, Zhiyong Liao, Ying Tan

    Traditional petroleum-based microbeads in personal care products are potentially harmful to the ecological environment and human health due to their non-biodegradability. Thus, it is essential to produce eco-friendly microbeads to replace the traditional ones. In this work, a facile and green method was used to manufacture biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microbeads for application in skin exfoliators. The PHBV microbeads were rapidly fabricated via a solvent exchange method wherein dimethyl isosorbide (DMI) acted as a green solvent and a polysorbate 80 aqueous solution was used as the antisolvent. The polymer solution concentration can reach a high of 15 wt%, enabling scalable production. The microbeads were biocompatible and harmless to both plants and aquatic organisms. Moreover, they were degradable in water environments containing microbes yet stable during storage in microbe-free water. Additionally, PHBV microbeads demonstrated excellent skin cleaning efficiency compared to other commercial materials. Therefore, as additives in exfoliation products, these eco-friendly PHBV microbeads have the potential to replace traditional petroleum-based microbeads.


  • Acetalized starch-based nanoparticles stabilized acid-sensitive Pickering emulsion as a potential antitumor drug carrier

    by Qimeng Zhang, Qifan Zhao, Bingbing Zhu, Rong Chen, Yating Zhou, Xiaopeng Pei, Hua Zhou, Huiyong An, Ying Tan, Chengshui Chen


  • Facile Fabrication of Starch-Based Microrods by Shear-Assisted Antisolvent-Induced Nanoprecipitation and Solidification

    by Qimeng Zhang, Xiaopeng Pei, Kepeng Hu, Yating Zhou, Ming-Liang Ma, Mingquan Wang, Huiyong An, Ying Tan

    Rod-like particles have attracted increasing attention because of their unique shape-dependent properties, which enable their superior performance compared to their isotropic counterparts. Thus, rod-like particles have potential applications in many fields, especially in biomedicine. However, the fabrication of uniform rod-like particles is challenging because of the principle of interfacial energy minimization. Herein, we present a facile, rapid, and cost-effective strategy for preparing starch-based microrods with tunable aspect ratios via shear-assisted antisolvent-induced nanoprecipitation and solidification. The preformed spherical particles swollen by the mixed solvent were elongated by the shear force and solidified in rod-like shape by antisolvent induction. The resulting starch-based microrods can encapsulate hydrophobic active substances and be modified with functional groups, indicating their potential applications as drug carriers and biologically active materials. The formation mechanism of the starch-based microrods discovered in this study provides a new perspective on the fabrication of rod-like polymer particles.