Yung Jin Yoon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yung Jin Yoon has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Jin Young Kim
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
7 shared publications - Bright Walker
Department of Chemistry Kyung Hee University Seoul Republic of Korea
4 shared publications - Jaeki Jeong
Department of Energy Science, Sungkyunkwan University, Suwon 16419, Republic of Korea
4 shared publications - Hyungsu Jang
Department of Energy Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, South Korea
3 shared publications - Hak-Beom Kim
Perovtronics Research Center and Department of Energy Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, South Korea
2 shared publications - Jae Won Kim
Department of Energy Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, South Korea
2 shared publications
Latest Publications
- Open Access
- 25 January 2025
- Published by Elsevier in Applied Surface Science Advances
- Vol. 26
Improving the charge transport of perovskite nanocrystal light-emitting-diodes through Benzylammonium ligand exchange
- 25 January 2025
- Published by Elsevier in Applied Surface Science Advances
- Vol. 26
Open AccessImproving the charge transport of perovskite nanocrystal light-emitting-diodes through Benzylammonium ligand exchange
- Top Cited Papers
- 5 April 2021
- Published by Springer Nature in Nature
- Vol. 592 (7854) , 381-385
Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Metal halide perovskites of the general formula ABX3—where A is a monovalent cation such as caesium, methylammonium or formamidinium; B is divalent lead, tin or germanium; and X is a halide anion—have shown great potential as light harvesters for thin-film photovoltaics1,2,3,4,5. Among a large number of compositions investigated, the cubic α-phase of formamidinium lead triiodide (FAPbI3) has emerged as the most promising semiconductor for highly efficient and stable perovskite solar cells6,7,8,9, and maximizing the performance of this material in such devices is of vital importance for the perovskite research community. Here we introduce an anion engineering concept that uses the pseudo-halide anion formate (HCOO−) to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films and to augment the crystallinity of the films. The resulting solar cell devices attain a power conversion efficiency of 25.6 per cent (certified 25.2 per cent), have long-term operational stability (450 hours) and show intense electroluminescence with external quantum efficiencies of more than 10 per cent. Our findings provide a direct route to eliminate the most abundant and deleterious lattice defects present in metal halide perovskites, providing a facile access to solution-processable films with improved optoelectronic performance.
- 5 April 2021
- Published by Springer Nature in Nature
- Vol. 592 (7854) , 381-385
Top Cited PapersPseudo-halide anion engineering for α-FAPbI3 perovskite solar cells
Metal halide perovskites of the general formula ABX3—where A is a monovalent cation such as caesium, methylammonium or formamidinium; B is divalent lead, tin or germanium; and X is a halide anion—have shown great potential as light harvesters for thin-film photovoltaics1,2,3,4,5. Among a large number of compositions investigated, the cubic α-phase of formamidinium lead triiodide (FAPbI3) has emerged as the most promising semiconductor for highly efficient and stable perovskite solar cells6,7,8,9, and maximizing the performance of this material in such devices is of vital importance for the perovskite research community. Here we introduce an anion engineering concept that uses the pseudo-halide anion formate (HCOO−) to suppress anion-vacancy defects that are present at grain boundaries and at the surface of the perovskite films and to augment the crystallinity of the films. The resulting solar cell devices attain a power conversion efficiency of 25.6 per cent (certified 25.2 per cent), have long-term operational stability (450 hours) and show intense electroluminescence with external quantum efficiencies of more than 10 per cent. Our findings provide a direct route to eliminate the most abundant and deleterious lattice defects present in metal halide perovskites, providing a facile access to solution-processable films with improved optoelectronic performance.
- 15 March 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 7 (15) , 4559-4566
Synergistic combination of amorphous indium oxide with tantalum pentoxide for efficient electron transport in low-power electronics
Among transparent metal oxide semiconductors, systems based on indium oxide currently deliver the best combination of electronic characteristics and optical transmittance, outperforming even the well-established polycrystalline silicon devices. Indium oxide has the unique property that uniform, amorphous films yield superior electronic properties compared to microcrystalline films; for this reason, Ga and Zn hetero-elements are usually added to disrupt crystallization and result in uniformly disordered films. However, dopants have a general tendency to increase the complexity and decrease the mobility of semiconductors and their addition might well be avoided if high-quality, amorphous In2O3 films could be grown without them. In this work, we show that this problem can be resolved by exploiting a synergistic interaction between solution-processed indium oxide (In2O3) and underlying tantalum pentoxide (Ta2O5) dielectric films. We observed that amorphous Ta2O5 inhibits crystallization of In2O3 leading to high-quality amorphous thin films with reduced oxygen deficiencies at the semiconductor/dielectric interface. Transparent Ta2O5/In2O3 TFTs with very low operating voltages were demonstrated with effective field-effect mobilities of up to 23.1 cm2 V−1 s−1 at only 3 V drain–source voltage (VDS) using this approach. Additionally, the suppressed carrier density arising from reduced oxygen deficiencies reduced the drain current at 0 V gate bias (I0) by six orders of magnitude from 0.25 mA to 10.8 nA, compared to a SiO2 reference device. These results highlight the importance of considering an underlying dielectric layer to maximize device performance.
- 15 March 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 7 (15) , 4559-4566
Synergistic combination of amorphous indium oxide with tantalum pentoxide for efficient electron transport in low-power electronics
Among transparent metal oxide semiconductors, systems based on indium oxide currently deliver the best combination of electronic characteristics and optical transmittance, outperforming even the well-established polycrystalline silicon devices. Indium oxide has the unique property that uniform, amorphous films yield superior electronic properties compared to microcrystalline films; for this reason, Ga and Zn hetero-elements are usually added to disrupt crystallization and result in uniformly disordered films. However, dopants have a general tendency to increase the complexity and decrease the mobility of semiconductors and their addition might well be avoided if high-quality, amorphous In2O3 films could be grown without them. In this work, we show that this problem can be resolved by exploiting a synergistic interaction between solution-processed indium oxide (In2O3) and underlying tantalum pentoxide (Ta2O5) dielectric films. We observed that amorphous Ta2O5 inhibits crystallization of In2O3 leading to high-quality amorphous thin films with reduced oxygen deficiencies at the semiconductor/dielectric interface. Transparent Ta2O5/In2O3 TFTs with very low operating voltages were demonstrated with effective field-effect mobilities of up to 23.1 cm2 V−1 s−1 at only 3 V drain–source voltage (VDS) using this approach. Additionally, the suppressed carrier density arising from reduced oxygen deficiencies reduced the drain current at 0 V gate bias (I0) by six orders of magnitude from 0.25 mA to 10.8 nA, compared to a SiO2 reference device. These results highlight the importance of considering an underlying dielectric layer to maximize device performance.
- 13 December 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (3) , 1107-1114
Ultrathin, lightweight and flexible perovskite solar cells with an excellent power-per-weight performance
Ultralight and flexible perovskite solar cells with the orthogonal AgNW electrodes exhibit an excellent power-per-weight of 29.4 W g−1.
- 13 December 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (3) , 1107-1114
Ultrathin, lightweight and flexible perovskite solar cells with an excellent power-per-weight performance
Ultralight and flexible perovskite solar cells with the orthogonal AgNW electrodes exhibit an excellent power-per-weight of 29.4 W g−1.
- Open Access
- 28 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (69) , 39777-39783
Non-halogenated diphenyl-chalcogenide solvent processing additives for high-performance polymer bulk-heterojunction solar cells
The ability to control the morphologies of active layers is a critical factor in the successful development of polymer solar cells (PSCs), and solvent processing additives offer a simple and effective way to accomplish this. In particular, diphenyl ether (DPE) is one of the most effective solvent additives but analogous additives based on this structure have not yet been extensively investigated. In this work, we have fabricated PSCs and investigated photovoltaic device characteristics using the series of non-halogenated, diphenyl-chalcogen solvent additives; DPE, diphenyl sulfide (DPS) and diphenyl selenide (DPSe). DPS devices showed optimal power conversion efficiencies (PCEs) of up to 9.08%, and DPE devices also showed similarly high PCEs of up to 8.85%. In contrast, DPSe devices showed relatively low PCEs (5.45% at best) which we attribute to significant surface recombination and high series resistance, which led to limited open-circuit voltage (VOC). In the case of DPS, fast, field-independent photocurrent saturation with negligible bimolecular recombination led to efficient charge separation and collection, which resulted in the highest PCEs. Additionally, using 1,2,4-trimethylbenzene and DPS as an entirely non-halogenated solvent/additive system, we successfully demonstrated device fabrication with comparably high PCEs of up to 8.4%. This work elucidates the effects of diphenyl-based solvent additives in PSCs and suggests a great potential of DPS as an effective non-halogenated solvent additive.
- 28 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (69) , 39777-39783
Open AccessNon-halogenated diphenyl-chalcogenide solvent processing additives for high-performance polymer bulk-heterojunction solar cells
The ability to control the morphologies of active layers is a critical factor in the successful development of polymer solar cells (PSCs), and solvent processing additives offer a simple and effective way to accomplish this. In particular, diphenyl ether (DPE) is one of the most effective solvent additives but analogous additives based on this structure have not yet been extensively investigated. In this work, we have fabricated PSCs and investigated photovoltaic device characteristics using the series of non-halogenated, diphenyl-chalcogen solvent additives; DPE, diphenyl sulfide (DPS) and diphenyl selenide (DPSe). DPS devices showed optimal power conversion efficiencies (PCEs) of up to 9.08%, and DPE devices also showed similarly high PCEs of up to 8.85%. In contrast, DPSe devices showed relatively low PCEs (5.45% at best) which we attribute to significant surface recombination and high series resistance, which led to limited open-circuit voltage (VOC). In the case of DPS, fast, field-independent photocurrent saturation with negligible bimolecular recombination led to efficient charge separation and collection, which resulted in the highest PCEs. Additionally, using 1,2,4-trimethylbenzene and DPS as an entirely non-halogenated solvent/additive system, we successfully demonstrated device fabrication with comparably high PCEs of up to 8.4%. This work elucidates the effects of diphenyl-based solvent additives in PSCs and suggests a great potential of DPS as an effective non-halogenated solvent additive.
- 24 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (41) , 20138-20144
The introduction of a perovskite seed layer for high performance perovskite solar cells
Processing for obtaining compact and uniform perovskite photoactive layers has been intensively studied over the last few years to achieve high power conversion efficiencies (PCEs) in solar cells. Particularly, high quality crystal growth of perovskite layers is critical to enhance device performance. We demonstrate an easy and effective new process for high efficiency p–i–n planar heterojunction structures of perovskite solar cells (PeSCs) by using a compact seed perovskite layer (CSPL). The CSPL assists vertical growth of perovskite crystals and obtains the highly crystalline perovskite photoactive layer, which leads to the reduction in the charge transfer resistance and a longer photoluminescence lifetime. The PeSC device with a CSPL shows a remarkably improved PCE, from 15.07% to 19.25%, with a record open circuit voltage (VOC) of 1.16 V in the p–i–n structure with pure crystal perovskite and negligible current density–voltage hysteresis. Additionally, a PCE of 20.37% was achieved in CSPL assisted n–i–p structure PeSCs.
- 24 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (41) , 20138-20144
The introduction of a perovskite seed layer for high performance perovskite solar cells
Processing for obtaining compact and uniform perovskite photoactive layers has been intensively studied over the last few years to achieve high power conversion efficiencies (PCEs) in solar cells. Particularly, high quality crystal growth of perovskite layers is critical to enhance device performance. We demonstrate an easy and effective new process for high efficiency p–i–n planar heterojunction structures of perovskite solar cells (PeSCs) by using a compact seed perovskite layer (CSPL). The CSPL assists vertical growth of perovskite crystals and obtains the highly crystalline perovskite photoactive layer, which leads to the reduction in the charge transfer resistance and a longer photoluminescence lifetime. The PeSC device with a CSPL shows a remarkably improved PCE, from 15.07% to 19.25%, with a record open circuit voltage (VOC) of 1.16 V in the p–i–n structure with pure crystal perovskite and negligible current density–voltage hysteresis. Additionally, a PCE of 20.37% was achieved in CSPL assisted n–i–p structure PeSCs.
- 10 August 2017
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 10 (9) , 1950-1957
Peroptronic devices: perovskite-based light-emitting solar cells
Solution processed perovskite semiconductors have developed rapidly over the past decade to yield excellent performance in both solar cell and light emitting diode devices. Both of these device types are prepared using similar materials and architectures, raising the possibility of perovskite based light emitting solar cells. Recent reports have indicated that some low band gap perovskite solar cells are able to emit infrared light efficiently, however, intermediate band gap perovskite solar cells which emit visible light have not, to the best of our knowledge been deliberately designed or extensively characterized. In this work, we have investigated the use of different electron transport layers in order to minimize energetic barriers to electron injection and extraction in methylammonium lead bromide (MAPbBr3) films. We demonstrate that through appropriate band structure engineering, MAPbBr3 can be used to make such “peroptronic” light-emitting solar cells, which simultaneously exhibit efficient solar cell power conversion efficiencies over 1% and 0.43 lm W−1 green light emission.
- 10 August 2017
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 10 (9) , 1950-1957
Peroptronic devices: perovskite-based light-emitting solar cells
Solution processed perovskite semiconductors have developed rapidly over the past decade to yield excellent performance in both solar cell and light emitting diode devices. Both of these device types are prepared using similar materials and architectures, raising the possibility of perovskite based light emitting solar cells. Recent reports have indicated that some low band gap perovskite solar cells are able to emit infrared light efficiently, however, intermediate band gap perovskite solar cells which emit visible light have not, to the best of our knowledge been deliberately designed or extensively characterized. In this work, we have investigated the use of different electron transport layers in order to minimize energetic barriers to electron injection and extraction in methylammonium lead bromide (MAPbBr3) films. We demonstrate that through appropriate band structure engineering, MAPbBr3 can be used to make such “peroptronic” light-emitting solar cells, which simultaneously exhibit efficient solar cell power conversion efficiencies over 1% and 0.43 lm W−1 green light emission.