Scott G. Ghiocel
Research Subjects
Scott G. Ghiocel has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Joe H. Chow
Rensselaer Polytechnic Institute
3 shared publications - Daniel Dotta
Department of Electrical Engineering, University of Campinas
2 shared publications Andrew Kindle
Dept. of Econ., Rensselaer Polytech. Inst., Troy, NY, USA
1 shared publication- Anthony Faris
Bonneville Power Administration, 17201 Portland, Oregon United States
1 shared publication - Daniel Douglas
ECSE, Rensselaer Polytechnic Institute, 8024 Troy, New York United States
1 shared publication - Daniel Shawhan
Resources for the Future, 1616 P St. NW, Suite 600, Washington, 20036-1400, UNITED STATES
1 shared publication
Latest Publications
- 15 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 12 (4) , 1935-1946
Optimized Reactive Power Capability of Wind Power Plants With Tap-Changing Transformers
With the recent advancements in power electronics for wind turbines (WTs) and increasing penetration of wind energy, wind power plants (WPP) have become necessary contributors of reactive power support for the bulk power system. Balancing reactive power support with individual WT operating requirements in a cost-effective manner is a challenge for WPP designers. In this paper, we present a methodology to optimize the WPP reactive power capability as seen from the point of common coupling (PCC), accounting for steady-state operating capabilities of the WPP equipment. Thus, the proposed methodology determines the configuration of the tap-changing transformers within the WPP that maximizes the amount of reactive power the WPP can either consume or inject to the network, considering uncertain levels of wind power generation and voltage magnitudes at the PCC. The optimized reactive power capability (ORPC) problem is initially formulated as a mixed-integer nonlinear programming (MINLP) model. Then, a set of efficient linearization techniques are used to obtain a mixed-integer linear programming (MILP) model that can be solved via off-the-shelf mathematical programming solvers. Results demonstrate that the proposed MILP model is a scalable, flexible and accurate method to maximize the reactive power capability of WPP.
- 15 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 12 (4) , 1935-1946
Optimized Reactive Power Capability of Wind Power Plants With Tap-Changing Transformers
With the recent advancements in power electronics for wind turbines (WTs) and increasing penetration of wind energy, wind power plants (WPP) have become necessary contributors of reactive power support for the bulk power system. Balancing reactive power support with individual WT operating requirements in a cost-effective manner is a challenge for WPP designers. In this paper, we present a methodology to optimize the WPP reactive power capability as seen from the point of common coupling (PCC), accounting for steady-state operating capabilities of the WPP equipment. Thus, the proposed methodology determines the configuration of the tap-changing transformers within the WPP that maximizes the amount of reactive power the WPP can either consume or inject to the network, considering uncertain levels of wind power generation and voltage magnitudes at the PCC. The optimized reactive power capability (ORPC) problem is initially formulated as a mixed-integer nonlinear programming (MINLP) model. Then, a set of efficient linearization techniques are used to obtain a mixed-integer linear programming (MILP) model that can be solved via off-the-shelf mathematical programming solvers. Results demonstrate that the proposed MILP model is a scalable, flexible and accurate method to maximize the reactive power capability of WPP.
- Open Access
- 24 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 33 (4) , 3644-3652
An Optimal Thévenin Equivalent Estimation Method and its Application to the Voltage Stability Analysis of a Wind Hub
A simplified voltage stability analysis method is to use a static Thévenin equivalent to represent the electrical connection to a load center. Assuming fixed values of the Thévenin voltage and reactance, a power-voltage (PV) curve analysis can be performed to find the voltage collapse point and stability margin. This paper proposes a method to compute the static Thévenin equivalent voltage and reactance of a power system using measured data. The method is validated with simulated PMU data and with 24-hour SCADA data at a wind hub on a medium voltage transmission system in the US western system. For the wind hub, the Thévenin equivalent parameters are used to compute the maximum power transfer capability of the wind hub as constrained by voltage stability. Then the method is extended to online application by using short data windows and forgetting factors.
- 24 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 33 (4) , 3644-3652
Open AccessAn Optimal Thévenin Equivalent Estimation Method and its Application to the Voltage Stability Analysis of a Wind Hub
A simplified voltage stability analysis method is to use a static Thévenin equivalent to represent the electrical connection to a load center. Assuming fixed values of the Thévenin voltage and reactance, a power-voltage (PV) curve analysis can be performed to find the voltage collapse point and stability margin. This paper proposes a method to compute the static Thévenin equivalent voltage and reactance of a power system using measured data. The method is validated with simulated PMU data and with 24-hour SCADA data at a wind hub on a medium voltage transmission system in the US western system. For the wind hub, the Thévenin equivalent parameters are used to compute the maximum power transfer capability of the wind hub as constrained by voltage stability. Then the method is extended to online application by using short data windows and forgetting factors.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
Modeless reconstruction of missing synchrophasor measurements
This paper presents a new framework of reconstructing missing synchrophasor measurements (erasures) without the modeling of power system dynamics. Leveraging the approximate low-rank property of phasor measurement unit (PMU) data, we connect the problem of reconstructing PMU data erasures with the recent advance in low-rank matrix completion methods. Erasures can be reconstructed through existing computationally-efficient algorithms such as singular value thresholding (SVT) and information cascading matrix completion (ICMC). Numerical experiments on actual PMU data are conducted to verify the effectiveness of the proposed method. Since existing analysis for matrix completion methods assumes an independent-erasure model that does not capture the correlation among PMU data erasures, we propose two models to characterize temporal correlation and channel correlation in PMU data erasures. We provide theoretical guarantees of the ICMC algorithm in reconstructing correlated erasures in both models.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
Modeless reconstruction of missing synchrophasor measurements
This paper presents a new framework of reconstructing missing synchrophasor measurements (erasures) without the modeling of power system dynamics. Leveraging the approximate low-rank property of phasor measurement unit (PMU) data, we connect the problem of reconstructing PMU data erasures with the recent advance in low-rank matrix completion methods. Erasures can be reconstructed through existing computationally-efficient algorithms such as singular value thresholding (SVT) and information cascading matrix completion (ICMC). Numerical experiments on actual PMU data are conducted to verify the effectiveness of the proposed method. Since existing analysis for matrix completion methods assumes an independent-erasure model that does not capture the correlation among PMU data erasures, we propose two models to characterize temporal correlation and channel correlation in PMU data erasures. We provide theoretical guarantees of the ICMC algorithm in reconstructing correlated erasures in both models.
- 15 July 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 4 (4) , 2356-2363
A Simultaneous Perturbation Approach for Solving Economic Dispatch Problems With Emission, Storage, and Network Constraints
In this paper, an environmental economic dispatch problem with storage, network, and inter-temporal constraints is considered. An approach based on the simultaneous perturbation technique is proposed to deal with the equality and inequality constraints in the economic dispatch problem. The algorithm has been implemented using Matlab and tested on a 6-bus, 5-generator system and a 140-bus, 48-generator system. The effects of cap-and-trade policies, energy storage, and transmission line flow limits in economic dispatch are discussed. The simulations reveal that the method can handle a variety of constraints with good convergence performance.
- 15 July 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 4 (4) , 2356-2363
A Simultaneous Perturbation Approach for Solving Economic Dispatch Problems With Emission, Storage, and Network Constraints
In this paper, an environmental economic dispatch problem with storage, network, and inter-temporal constraints is considered. An approach based on the simultaneous perturbation technique is proposed to deal with the equality and inequality constraints in the economic dispatch problem. The algorithm has been implemented using Matlab and tested on a 6-bus, 5-generator system and a 140-bus, 48-generator system. The effects of cap-and-trade policies, energy storage, and transmission line flow limits in economic dispatch are discussed. The simulations reveal that the method can handle a variety of constraints with good convergence performance.