Muhammet Fethi Gullu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Muhammet Fethi Gullu has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Kutay Orakcal
Boğaziçi University, İstanbul, Türkiye
5 shared publications - Izzettin Alhalil
Department of Civil Engineering, Harran University, Sanliurfa 63200, Turkey
4 shared publications - Alper Ilki
Istanbul Technical Univ
2 shared publications - Cem Tura
Boğaziçi University, İstanbul, Türkiye
2 shared publications Alex Shegay
1 shared publication- Ali H. Omar
Department of Highway and Bridge Engineering, Erbil Polytechnic University, Erbil, Iraq
1 shared publication
Latest Publications
- 1 March 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 152 (3)
Refined Experimental Data Set for Reinforced Concrete Columns
- 1 March 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 152 (3)
Refined Experimental Data Set for Reinforced Concrete Columns
- Open Access
- 30 December 2025
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 24 (3) , 533-550
Comparison of structural responses for tall buildings with varying twisting rates and core wall configurations
This study aims to compare the structural responses of tall buildings (TBs) with different twisting rates and core wall configurations to investigate their effect under various loading conditions. The study examines three groups of TBs with varying core wall layouts: hexagonal shape for group A, circular shape for group B, and square shape for group C. Three models were constructed for each group, with twisting angles of 0°, 90°, and 180°. The study initially compares the nine different models’ natural periods of vibration and modal mass participation ratios. The towers’ wind and seismic responses for each model under wind, response spectrum (RS), and nonlinear time history (NTH) analysis are also presented. The wind, RS, and NTH analysis outcomes regarding the structural system (natural periods, drift ratios, story shear forces, and overturning moments) and members (shear forces and bending moments on columns and walls) have been compared. Finally, a multiple-criteria decision-making algorithm was used to determine the optimum model based on the investigated responses. The findings indicate that the core wall layout has a more significant influence on the response of TBs than the twisting rate. Specifically, a building with a hexagonal core wall system and 0-degree twist is identified as the optimal configuration. Although its effects are less significant than seismic forces, wind analysis reveals that twisting in buildings slightly reduces the natural period and drift ratios. This study emphasizes the impact of TBs configurations and twisting rates on both wind and seismic responses.
- 30 December 2025
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 24 (3) , 533-550
Open AccessComparison of structural responses for tall buildings with varying twisting rates and core wall configurations
This study aims to compare the structural responses of tall buildings (TBs) with different twisting rates and core wall configurations to investigate their effect under various loading conditions. The study examines three groups of TBs with varying core wall layouts: hexagonal shape for group A, circular shape for group B, and square shape for group C. Three models were constructed for each group, with twisting angles of 0°, 90°, and 180°. The study initially compares the nine different models’ natural periods of vibration and modal mass participation ratios. The towers’ wind and seismic responses for each model under wind, response spectrum (RS), and nonlinear time history (NTH) analysis are also presented. The wind, RS, and NTH analysis outcomes regarding the structural system (natural periods, drift ratios, story shear forces, and overturning moments) and members (shear forces and bending moments on columns and walls) have been compared. Finally, a multiple-criteria decision-making algorithm was used to determine the optimum model based on the investigated responses. The findings indicate that the core wall layout has a more significant influence on the response of TBs than the twisting rate. Specifically, a building with a hexagonal core wall system and 0-degree twist is identified as the optimal configuration. Although its effects are less significant than seismic forces, wind analysis reveals that twisting in buildings slightly reduces the natural period and drift ratios. This study emphasizes the impact of TBs configurations and twisting rates on both wind and seismic responses.
- 18 October 2025
- Published by Elsevier in Structures
- Vol. 82
A fast seismic assessment technique for reinforced concrete buildings: Machine learning-based Hassan Index
- 18 October 2025
- Published by Elsevier in Structures
- Vol. 82
A fast seismic assessment technique for reinforced concrete buildings: Machine learning-based Hassan Index
- Open Access
- 11 April 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 24 (1) , 93-134
A new layered shell model for reinforced concrete walls II: experimental validation against quasi-static tests
Nonlinear analysis procedures used in performance-based design/assessment of structural systems with reinforced concrete walls are subject to much improvement, upon implementation of a reliable modeling approach that is capable of accurately simulating the nonlinear response characteristics of both planar and non-planar walls at both global (force-displacement, moment-rotation, torque-twist) and local (e.g., strains, shear deformations, flexural deformations) response levels under combined and multi-directional loading conditions. Towards this objective, a novel nonlinear layered shell element, referred to as the Layered Fixed-Strut-Angle Finite Element (LFSAFE) model, was developed and implemented in OpenSees. In this paper, the effectiveness and accuracy of the LFSAFE model is experimentally-validated, via simulation of test results presented in the literature for non-planar (U-shaped and H-shaped) walls specimens subjected to quasi-static multi-directional lateral and torsional loading conditions. Model results obtained for U-shaped wall specimens under uni-directional lateral loading, bi-directional lateral loading, and pure torsion, as well as for H-shaped wall specimens tested under combined lateral and torsional loading, are systematically compared with test results to assess the capabilities of the model. Comprehensive response comparisons provided in this paper demonstrate that the LFSAFE model can accurately simulate salient response attributes of non-planar walls under combined loading, in terms of hysteretic load-displacement and torque-twist behavior, lateral load and torque capacity, stiffness, ductility, as well as contribution of flexural and shear deformations to lateral displacements and the vertical strain distributions developing both along the wall height and across the wall cross section.
- 11 April 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 24 (1) , 93-134
Open AccessA new layered shell model for reinforced concrete walls II: experimental validation against quasi-static tests
Nonlinear analysis procedures used in performance-based design/assessment of structural systems with reinforced concrete walls are subject to much improvement, upon implementation of a reliable modeling approach that is capable of accurately simulating the nonlinear response characteristics of both planar and non-planar walls at both global (force-displacement, moment-rotation, torque-twist) and local (e.g., strains, shear deformations, flexural deformations) response levels under combined and multi-directional loading conditions. Towards this objective, a novel nonlinear layered shell element, referred to as the Layered Fixed-Strut-Angle Finite Element (LFSAFE) model, was developed and implemented in OpenSees. In this paper, the effectiveness and accuracy of the LFSAFE model is experimentally-validated, via simulation of test results presented in the literature for non-planar (U-shaped and H-shaped) walls specimens subjected to quasi-static multi-directional lateral and torsional loading conditions. Model results obtained for U-shaped wall specimens under uni-directional lateral loading, bi-directional lateral loading, and pure torsion, as well as for H-shaped wall specimens tested under combined lateral and torsional loading, are systematically compared with test results to assess the capabilities of the model. Comprehensive response comparisons provided in this paper demonstrate that the LFSAFE model can accurately simulate salient response attributes of non-planar walls under combined loading, in terms of hysteretic load-displacement and torque-twist behavior, lateral load and torque capacity, stiffness, ductility, as well as contribution of flexural and shear deformations to lateral displacements and the vertical strain distributions developing both along the wall height and across the wall cross section.
- Open Access
- 25 March 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 24 (1) , 43-92
A new layered shell model for reinforced concrete walls I: model description and dynamic response simulations
Increasingly widespread use of nonlinear response history analysis methods for performance-based design/assessment of buildings with complex reinforced concrete (RC) wall systems has underlined the need for development and implementation of more robust nonlinear modeling approaches that can simulate important (yet commonly-ignored) nonlinear response characteristics of RC walls, such as shear-flexure-torsion interaction, plane sections not remaining plane, warping, out-of-plane behavior, nonlinear shear deformations, and shear stress migration across wall cross-section. Such advanced modeling approaches for walls need to be implemented in widely-accessible computational platforms that are capable of efficiently simulating the dynamic response of entire three-dimensional structural systems incorporating walls, under multi-directional seismic excitations. Furthermore, studies available in the literature on dynamic testing of walls and wall systems, and studies on detailed validation of refined wall models against data obtained from such dynamic test campaigns, are both scarce. With these considerations in mind, a new finite element modeling approach, referred to as the Layered Fixed-Strut-Angle Finite Element (LFSAFE) model, was developed and implemented in the widely-accessible analysis platform OpenSees. In this paper, the constitutive behavior and working principles of the LFSAFE model element are summarized. As well, nonlinear dynamic response simulation capabilities of the model are evaluated, via comparison of model response simulations with shake table test results conducted on ( i ) a half-scale isolated U-shaped wall specimen subjected to bi-directional ground accelerations, and ( ii ) a full-scale ten-story wall-frame building specimen subjected to three-directional ground accelerations. The three-dimensional dynamic response simulations presented in this paper demonstrate that the LFSAFE model is efficient in replicating, with reasonable accuracy, the experimentally-measured seismic displacement, acceleration, and deformation demands developing on both the U-shaped wall specimen and the three-dimensional wall-frame building system investigated. Capabilities of the LFSAFE model are demonstrated, and its limitations are identified.
- 25 March 2025
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 24 (1) , 43-92
Open AccessA new layered shell model for reinforced concrete walls I: model description and dynamic response simulations
Increasingly widespread use of nonlinear response history analysis methods for performance-based design/assessment of buildings with complex reinforced concrete (RC) wall systems has underlined the need for development and implementation of more robust nonlinear modeling approaches that can simulate important (yet commonly-ignored) nonlinear response characteristics of RC walls, such as shear-flexure-torsion interaction, plane sections not remaining plane, warping, out-of-plane behavior, nonlinear shear deformations, and shear stress migration across wall cross-section. Such advanced modeling approaches for walls need to be implemented in widely-accessible computational platforms that are capable of efficiently simulating the dynamic response of entire three-dimensional structural systems incorporating walls, under multi-directional seismic excitations. Furthermore, studies available in the literature on dynamic testing of walls and wall systems, and studies on detailed validation of refined wall models against data obtained from such dynamic test campaigns, are both scarce. With these considerations in mind, a new finite element modeling approach, referred to as the Layered Fixed-Strut-Angle Finite Element (LFSAFE) model, was developed and implemented in the widely-accessible analysis platform OpenSees. In this paper, the constitutive behavior and working principles of the LFSAFE model element are summarized. As well, nonlinear dynamic response simulation capabilities of the model are evaluated, via comparison of model response simulations with shake table test results conducted on ( i ) a half-scale isolated U-shaped wall specimen subjected to bi-directional ground accelerations, and ( ii ) a full-scale ten-story wall-frame building specimen subjected to three-directional ground accelerations. The three-dimensional dynamic response simulations presented in this paper demonstrate that the LFSAFE model is efficient in replicating, with reasonable accuracy, the experimentally-measured seismic displacement, acceleration, and deformation demands developing on both the U-shaped wall specimen and the three-dimensional wall-frame building system investigated. Capabilities of the LFSAFE model are demonstrated, and its limitations are identified.
- Open Access
Predicting Main Characteristics of Reinforced Concrete Buildings Using Machine Learning
This paper presents a comprehensive study of five machine learning (ML) algorithms for predicting key characteristics of Reinforced Concrete (RC) structural systems. A novel dataset, ModRes, consisting of 9723 examples derived from modal and response spectrum analyses on masonry-infilled three-dimensional RC buildings, was created for ML applications. The primary objective is to develop an ML model using five distinct algorithms from the literature, capable of concurrently predicting torsional irregularity, modal participating mass ratio (MPMR), and the fundamental period in a 3D environment, while accounting for the influence of infill walls. Additionally, the study aims to determine the applicability of pushover analysis (POA) without the need for extensive numerical modeling and analysis. This approach optimizes the preliminary design process with minimal computational effort, providing valuable insights into dynamic and torsional responses during seismic events. The Categorical Boosting algorithm demonstrated outstanding performance, achieving R2 values of 0.977 for torsional irregularity, 0.997 for the fundamental period, and 0.923 for MPMR on the test dataset. It also successfully predicted POA applicability with an error rate of only 1.36%. This study highlights the practical application of ML algorithms, underscoring their effectiveness in structural engineering.
Open AccessPredicting Main Characteristics of Reinforced Concrete Buildings Using Machine Learning
This paper presents a comprehensive study of five machine learning (ML) algorithms for predicting key characteristics of Reinforced Concrete (RC) structural systems. A novel dataset, ModRes, consisting of 9723 examples derived from modal and response spectrum analyses on masonry-infilled three-dimensional RC buildings, was created for ML applications. The primary objective is to develop an ML model using five distinct algorithms from the literature, capable of concurrently predicting torsional irregularity, modal participating mass ratio (MPMR), and the fundamental period in a 3D environment, while accounting for the influence of infill walls. Additionally, the study aims to determine the applicability of pushover analysis (POA) without the need for extensive numerical modeling and analysis. This approach optimizes the preliminary design process with minimal computational effort, providing valuable insights into dynamic and torsional responses during seismic events. The Categorical Boosting algorithm demonstrated outstanding performance, achieving R2 values of 0.977 for torsional irregularity, 0.997 for the fundamental period, and 0.923 for MPMR on the test dataset. It also successfully predicted POA applicability with an error rate of only 1.36%. This study highlights the practical application of ML algorithms, underscoring their effectiveness in structural engineering.
- 11 May 2023
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 48 (10) , 13523-13551
Investigating Infill Wall Configurations on 3-D Structural Systems with a Generalized Modeling Approach
- 11 May 2023
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 48 (10) , 13523-13551
Investigating Infill Wall Configurations on 3-D Structural Systems with a Generalized Modeling Approach
- Open Access
- 31 December 2022
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 9 (2) , 799-818
Görece Narin Betonarme Perde Duvarlarda Mevcut Beton Malzeme Modellerinin Etkilerinin İrdelenmesi
Betonarme elemanların doğrusal olmayan analizleri gelişen teknoloji ve mevcut yönetmeliklerin geliştirilerek bu teknolojiyi kullanması ile birlikte günümüzde önem kazanmaktadır. Betonarme yapıların doğru bir şekilde modellenmesi ve doğrusal olmayan analizlerin gerçekleştirilmesi için uygun beton ve donatı malzeme modellerine ihtiyaç vardır. Literatürde bu konuda birçok çalışma mevcuttur. Özellikle yüksek bina tasarımında betonarme perde duvarların yayılı plastisite teorisine göre modellenmesi ile birlikte kullanılan beton ve donatı modelinin doğruluğunun önemi artmıştır. Bu çalışma kapsamında betonarme elemanlar için geliştirilmiş olan ve betonun doğrusal olmayan davranışını öngören üç farklı beton malzeme modelleri kullanılarak görece narin betonarme perde duvarların doğrusal olmayan davranışı incelenmiştir. Bu malzeme modellerinin teorilerine uygun olarak farklı beton sınıflarının (örn: C30 ve C40) parabolik eğrileri bahsi geçen modeller kullanılarak elde edilmiştir. Elde edilen beton parabolik malzeme modelleri, Perform 3D yapısal analiz programında tanımlanmak için doğrusal parçacıklardan oluşan eğriler şeklinde basitleştirilmiştir. Paket programda beton malzemeleri, beton sınıfları ve tekrarlı yükler altında birim şekil değiştirmeye bağlı azaltma katsayıları değiştirilerek görece narin betonarme perde duvarların analizi yapılmıştır. Analiz sonuçları birbiriyle ve deneysel sonuçlarla kıyaslanarak değerlendirilmiş ve farklı malzeme modellerinin boy/en oranı 3.0 olan betonarme perde duvarların doğrusal olmayan analiz sonuçlarında birbiriyle uyum içerisinde olduğu tespit edilmiştir. Ancak boy/en oranı 2.0 ve 1.5 olan betonarme perde duvarların doğrusal olmayan analizlerinde beton modeli seçiminin ve farklı beton dayanımları kullanılmasının sonuçları etkilediği ortaya çıkmıştır.
- 31 December 2022
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 9 (2) , 799-818
Open AccessGörece Narin Betonarme Perde Duvarlarda Mevcut Beton Malzeme Modellerinin Etkilerinin İrdelenmesi
Betonarme elemanların doğrusal olmayan analizleri gelişen teknoloji ve mevcut yönetmeliklerin geliştirilerek bu teknolojiyi kullanması ile birlikte günümüzde önem kazanmaktadır. Betonarme yapıların doğru bir şekilde modellenmesi ve doğrusal olmayan analizlerin gerçekleştirilmesi için uygun beton ve donatı malzeme modellerine ihtiyaç vardır. Literatürde bu konuda birçok çalışma mevcuttur. Özellikle yüksek bina tasarımında betonarme perde duvarların yayılı plastisite teorisine göre modellenmesi ile birlikte kullanılan beton ve donatı modelinin doğruluğunun önemi artmıştır. Bu çalışma kapsamında betonarme elemanlar için geliştirilmiş olan ve betonun doğrusal olmayan davranışını öngören üç farklı beton malzeme modelleri kullanılarak görece narin betonarme perde duvarların doğrusal olmayan davranışı incelenmiştir. Bu malzeme modellerinin teorilerine uygun olarak farklı beton sınıflarının (örn: C30 ve C40) parabolik eğrileri bahsi geçen modeller kullanılarak elde edilmiştir. Elde edilen beton parabolik malzeme modelleri, Perform 3D yapısal analiz programında tanımlanmak için doğrusal parçacıklardan oluşan eğriler şeklinde basitleştirilmiştir. Paket programda beton malzemeleri, beton sınıfları ve tekrarlı yükler altında birim şekil değiştirmeye bağlı azaltma katsayıları değiştirilerek görece narin betonarme perde duvarların analizi yapılmıştır. Analiz sonuçları birbiriyle ve deneysel sonuçlarla kıyaslanarak değerlendirilmiş ve farklı malzeme modellerinin boy/en oranı 3.0 olan betonarme perde duvarların doğrusal olmayan analiz sonuçlarında birbiriyle uyum içerisinde olduğu tespit edilmiştir. Ancak boy/en oranı 2.0 ve 1.5 olan betonarme perde duvarların doğrusal olmayan analizlerinde beton modeli seçiminin ve farklı beton dayanımları kullanılmasının sonuçları etkilediği ortaya çıkmıştır.
- 30 December 2022
- Published by Harran University in Harran Üniversitesi Mühendislik Dergisi
- Vol. 7 (3) , 193-203
Farklı Sonlu Elemanlar Yaklaşımları Kullanılarak Radye Temel Parametrelerinin Temel Oturması Üzerine Etkisinin Araştırılması
Bu çalışma kapsamında farklı sonlu elemanlar yaklaşımları kullanılarak on katlı betonarme bir binanın radye temel kalınlıkları ve temel beton sınıfları değişiminin oturma üzerine etkisi araştırılmıştır. İlk yaklaşımda yapı düşey yükleri, radye temel sistemi üzerine alan yükü olarak etkitilmiştir. İkinci yaklaşımda ise yapı ve zemin birlikte modellenerek üst yapı yükleri zemine doğrudan aktarılmıştır. İki farklı yaklaşımla elde edilen modellerde 80-100-120 cm’lik üç farklı temel kalınlığı ve altı farklı radye temel beton sınıfı (C25-C30-C35-C40-C45-C50) kullanılarak toplam 36 farklı üç boyutlu sonlu elemanlar analizi gerçekleştirilmiştir. Birleşik model yaklaşımında temel kalınlığı ve beton sınıfının doğal titreşim periyotları üzerine etkisi de araştırılmıştır. Modellenen radye temel sistemlerinin merkez ve köşe noktalarındaki oturmalar hesaplanmıştır. Radye temel kalınlığı ve elastisite modülünün oturma üzerine etkisi iki yaklaşım için de değerlendirilmiştir. Farklı yaklaşımlarla elde edilen sonuçlar birbirleriyle kıyaslanarak temel oturma farklılıkları incelenmiştir. Her iki yaklaşım için temel merkez oturmalarında benzer grafiksel eğilimlere rastlanırken temel köşe oturmalarında farklılıklar tespit edilmiştir.
- 30 December 2022
- Published by Harran University in Harran Üniversitesi Mühendislik Dergisi
- Vol. 7 (3) , 193-203
Farklı Sonlu Elemanlar Yaklaşımları Kullanılarak Radye Temel Parametrelerinin Temel Oturması Üzerine Etkisinin Araştırılması
Bu çalışma kapsamında farklı sonlu elemanlar yaklaşımları kullanılarak on katlı betonarme bir binanın radye temel kalınlıkları ve temel beton sınıfları değişiminin oturma üzerine etkisi araştırılmıştır. İlk yaklaşımda yapı düşey yükleri, radye temel sistemi üzerine alan yükü olarak etkitilmiştir. İkinci yaklaşımda ise yapı ve zemin birlikte modellenerek üst yapı yükleri zemine doğrudan aktarılmıştır. İki farklı yaklaşımla elde edilen modellerde 80-100-120 cm’lik üç farklı temel kalınlığı ve altı farklı radye temel beton sınıfı (C25-C30-C35-C40-C45-C50) kullanılarak toplam 36 farklı üç boyutlu sonlu elemanlar analizi gerçekleştirilmiştir. Birleşik model yaklaşımında temel kalınlığı ve beton sınıfının doğal titreşim periyotları üzerine etkisi de araştırılmıştır. Modellenen radye temel sistemlerinin merkez ve köşe noktalarındaki oturmalar hesaplanmıştır. Radye temel kalınlığı ve elastisite modülünün oturma üzerine etkisi iki yaklaşım için de değerlendirilmiştir. Farklı yaklaşımlarla elde edilen sonuçlar birbirleriyle kıyaslanarak temel oturma farklılıkları incelenmiştir. Her iki yaklaşım için temel merkez oturmalarında benzer grafiksel eğilimlere rastlanırken temel köşe oturmalarında farklılıklar tespit edilmiştir.