DZDanni Zhu

Danni Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Danni Zhu has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • An annular explosive cathode with a shielding ring for the X-band high-impedance relativistic klystron amplifier

    by Danni Zhu, Jin Meng, Yancheng Cui, Haitao Wang, Kang Luo, Bingfang Deng

    High impedance (>1 kΩ) relativistic klystron amplifiers (RKAs) are able to avoid power capacity limitations with higher conversion efficiency, compared with low impedance RKAs. An annular explosive cathode is investigated to offer moderate density electron beams for an X-band high-impedance RKA. Instead of a traditional solid thermionic cathode applied to a high-impedance RKA, the annular explosive cathode is able to simplify and minimize its conventional electron optics system. Nevertheless, the impedance of explosive cathode is hardly to achieve as high as kΩ level. A shielding ring is introduced to realize the high impedance of 1.15 kΩ and reduce the surface electric field on unexpected explosive emission region. Analysis of the explosive cathode employed in the X-band high-impedance RKA are described. The fine performance of this RKA is demonstrated by 2.5-D particle-in-cell (PIC) simulations. The typical microwaves with a power of 100 MW are generated at a frequency of 11.424 GHz when the beam voltage and current are 527 kV and 457 A respectively, under a guiding magnetic field of 0.55 T. The corresponding power conversion efficiency and gain are as high as 42% and 50 dB.

  • A Backward-Triggered 4H-SiC Photoconductive Semiconductor Switch With Planar Electrode Structure

    by Xu Chu, Jin Meng, Haitao Wang, Danni Zhu, Bingfang Deng, Yancheng Cui

    The power capacity of a photoconductive semiconductor switch with the planar electrode is limited by surface breakdown voltage. In this work, an efficient thinned 4H-SiC PCSS with a planar electrode backward-triggered structure was fabricated. Comparison simulations on the photocurrent density and electric field showed that the distribution of photogenerated carriers was homogenized, and the maximum electric field declined. By thinning and polishing, photoconductive semiconductor switch (PCSS) devices with thicknesses of 50 and 500 $\mu $ m were obtained for experiments. Triggered by a 355-nm laser, it demonstrated that the photocurrent of the backward-triggered PCSS device was basically equivalent to the origin planar structure. Meanwhile, the withstand voltage of PCSS devices significantly increased from 5.5 to 8 kV. The results proved that the backward-triggered structure can optimize the photocurrent of PCSS devices from 37 to 41 A while ensuring the photoelectric output efficiency. The failure mechanisms were also investigated with several analysis methods. Under a strong electric field, the devices were damaged due to the thermal stress caused by local field concentration. The characterization analysis results further demonstrated the importance of optimizing electrode configuration to decrease the electric field distribution at the electrode edge. This work is of great significance for PCSS devices on high-power applications.


  • Influence of Nitrogen Doping in Vanadium- Compensated 4H-SiC on Transient Photocurrent Response for Photoconductive Microwave Generation

    by Xu Chu, Jin Meng, Haitao Wang, Danni Zhu, Yuzhang Yuan, Liyang Huang, Zhongwu Xiang, Jiangfeng Han, Bingfang Deng, Yancheng Cui, et al.

    High-frequency microwave generation based on PCSS devices requires the fastest possible response speed. In this study, we successfully demonstrated controlled donor level doping in 4H-SiC PCSS devices to reduce the carrier recombination lifetime and enhance high-frequency microwave generation. PCSSs with three different doping of nitrogen concentrations were manufactured and compared. By femtosecond transient absorption spectroscopy (fs-TAS), we observed that the 4H-SiC PCSS devices doped with lower nitrogen concentrations exhibited significantly shorter carrier recombination lifetime and faster response speed, ranging from 137 ps to 118 ps. Furthermore, experiment results demonstrate that if nitrogen doping concentration was below 10 16 cm -3 , the PCSS devices could generate high-frequency microwave up to 10 GHz, with improved response speed and higher photoelectric efficiency. Consequently, by precisely controlling the nitrogen concentration, it is feasible to enhance the response frequency of photoconductive microwaves.


  • Test and Analysis on the Gyromagnetic Nonlinear Transmission Lines With Different Magnetic Cores

    by Yancheng Cui, Jin Meng, Danni Zhu, Haitao Wang, Yuzhang Yuan, Liyang Huang, Xu Chu

    Miniaturization and frequency tunability have become two important development directions of high-power microwave technology. The wideband high-power microwave system based on gyromagnetic nonlinear transmission line (GNLTL) has been proven to have the potential to produce smaller physical size and lighter weight. The GNLTL is a special wideband source whose output frequency can be tuned online by changing the biasing magnetic field. The working mechanism of a GNLTL is related to the damping precession of magnetic moments, and the parameters of magnetic material have important effects on the output microwaves. However, the details of these effects are still not fully clear. This article tested and analyzed the effects of three key gyromagnetic parameters on the output microwaves, namely, saturation magnetization ( $\textit{M}_{\textit{s}}$ ), spin wave linewidth ( $\Delta\textit{H}_{\textit{k}}$ ), and ferromagnetic resonance (FMR) linewidth ( $\Delta\textit{H}$ ). The results showed that the cores with higher $\textit{M}_{\textit{s}}$ and lower $\Delta \textit{H}$ help to increase the peak power. The spin wave linewidth $\Delta \textit{H}_{\textit{k}}$ has little effect on the peak power, but the cores with lower $\Delta\textit{H}_{\textit{k}}$ can expand the frequency tuning range. The experimental results and theoretical analyses help to the selection of magnetic cores and the predesign of the GNLTLs.


  • A high-efficiency C-band coaxial transit time oscillator with a dual-cavity extractor under low-magnetic fields

    by Danni Zhu, Yancheng Cui, Jin Meng, Haitao Wang, Bingfang Deng, Yuzhang Yuan

    A high-efficiency C-band coaxial transit time oscillator with a dual-cavity extractor under low-magnetic fields is designed and studied through small-signal theory and particle-in-cell simulation. Small-signal theory analysis indicates that a dual-cavity extractor is superior to a single-cavity extractor in terms of the beam-coupling coefficient, the resonant frequency, and the external quality factor, which are good for high efficiency. Typical simulation results of the proposed device show that an output power of 1.73 GW and a frequency of 6.37 GHz can be obtained with a diode voltage of 455 kV and current of 9.75 kA. The corresponding power efficiency reaches 39%, and the guiding magnetic field is 0.8 T. Further simulation demonstrates that the power efficiency exceeds 34% in a rather large range of diode voltage from 385 kV to 470 kV and can reach higher than 35% with a low guiding magnetic field of 0.4 T. Then this coaxial transit time oscillator is compared with the typical relativistic backward wave oscillators from the magnetic field, efficiency and power saturation time.


  • Destructive Testing for Reliability Analysis at High-Power Microwave in GaAs/InGaP Hetero-Junction Bipolar Transistor

    by Liyang Huang, Qidong Mao, Zhongwu Xiang, Danni Zhu, Jin Meng

    The destructive testing for reliability analysis at high-power microwave (HPM) in the GaAs/InGaP hetero-junction bipolar transistor (HBT) has been rarely investigated although it has a significant impact on their performance and reliability against HPM. This paper employs the experimental measurements to study the HPM damage process. We first establish the experiment platform for injecting the HPM to the GaAs/InGaP HBT which has the P1dB output power of +15.5 dBm to acquire the damage threshold. It is found that with the increasing of the input power, the output waveforms are gradually distorted. In particular, when the input power increases to 45 dBm, the S parameters of the GaAs/InGaP HBT chip show that it is totally destroyed. The experiment results show that the damage threshold of the HBT decreases with the increase of the pulse width, and the decrease rate of the damage threshold gradually slowed down with the increases of pulse width. The damage threshold can be reduced by increasing the pulse number from 1 to 10.


  • Investigating emission characteristics and plasma properties in a long-pulse magnetically insulated coaxial diode with different cathode materials

    by Danni Zhu, Yancheng Cui, Jin Meng, Yuzhang Yuan, Haitao Wang, Jiangfeng Han

    Magnetically insulated coaxial diodes are widely used in O-type high power microwave device for intensive annular electron beam generation. This study reports on a series of electrical and optical measurements on a long-pulse magnetically insulated coaxial diodes in which the emission characteristics and the plasma properties were observed. The impact of cathode material, blade angle, diode voltage and guiding magnetic field on the emission characteristics and the plasma properties of six types of annular cathodes were studied. Two configurations of these cathodes have been used, one with a sharp edge for aluminum, bronze, graphite, stainless-steel, silicon-aluminum alloy and another metal–dielectric. The impressing diode performance was achieved with the metal-dielectric cathode characterized on the excellent emission characteristics and plasma properties. Moreover, high voltage and small blade angle are beneficial to the emission capability and emission uniformity. For the cathode with smaller blade angle, its axial plasma expansion velocity is smaller during the pulse plateau. The strong magnetic field or the large diode voltage is confirmed to reduce the axial and radial expansion velocities.


  • A wideband high-power microwave radiation source based on gyromagnetic nonlinear transmission line and Vlasov antenna

    by Yancheng Cui, Jin Meng, Kang Luo, Jiangfeng Han, Liyang Huang, Danni Zhu

    The gyromagnetic nonlinear transmission line (GNLTL) is a special kind of coaxial transmission line partially loaded with the ferrite material. A GNLTL system can modulate the input high-power pulses into wideband high-power microwaves without relying on the electron beam and confining magnetic field. The unique working mechanism gives the GNLTL system the potential to be a small portable wideband high-power microwave radiation source. In this study, a wideband high-power microwave radiation source based on a GNLTL system is designed and constructed. In order to effectively radiate the wideband microwaves into the air, a high-power wideband Vlasov antenna and a special absorption high-pass filter are developed. The designs of key subsystems and high-power radiation experiments have been introduced and discussed in detail. In the test experiments, a radiated pulse with a peak electric field strength of 23 kV/m was measured at 20 m away from the transmitting antenna and the effective potential of radiation is 460 kV/m. The pulse width of the radiation pulse is about 4 ns, the center frequency is about 2.25 GHz, and the highest repetition rate can reach 25 Hz.


  • 100-MW-Level Experiments of a Gyromagnetic Nonlinear Transmission Line System

    by Yancheng Cui, Jin Meng, Liyang Huang, Danni Zhu

    The wideband high-power microwave systems have the advantages of wide energy spectrum, electron beam independence, compactness, and low cost. The gyromagnetic nonlinear transmission line (GNLTL) has drawn much attention for its potential as a novel solid-state, frequency-agile, and compact wideband source. The working mechanism of GNLTL is different from that of the traditional electric vacuum tubes, and the strong dispersion and nonlinear characteristics make it difficult to be accurately theoretically calculated and simulated. In this article, a 100-MW-level GNLTL system based on a Tesla-type driver was designed and constructed. A series of test experiments were then carried out to investigate the effects of different configurations, including delay line length, ferrite cores’ assembly orientation, transmission line length, bias magnetic field magnitude, and excitation voltage. The changing laws of the key parameters of the output microwaves including the peak power, modulation depth, center frequency, and percentage band are summarized and the underlying physical mechanisms are analyzed. The results may be instructive for the predesign of GNLTLs, especially for the devices operating at high power. In addition, a multiple center frequency points’ phenomenon was discovered in the output signal, which may bring new application possibilities for GNLTL.