Haitao Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haitao Wang has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Jin Meng
Naval University of Engineering
18 shared publications - Chaochao Yang
Naval University of Engineering
13 shared publications - Yancheng Cui
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China
13 shared publications - Bingfang Deng
Naval University of Engineering
11 shared publications - Danni Zhu
National Key Laboratory of Science and Technology on Vessel Integrated Power System, Naval University of Engineering, Wuhan, China
10 shared publications - Yuzhang Yuan
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China
10 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (11) , 2283-2286
Mode-Matching-Guided Machine Learning for Cold-Cavity Inverse Design of a Tunable Transit-Time Oscillator
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (11) , 2283-2286
Mode-Matching-Guided Machine Learning for Cold-Cavity Inverse Design of a Tunable Transit-Time Oscillator
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (9) , 5745-5750
Analysis and Suppression of Asymmetric Mode Competition in a Ka-Band Transit Time Oscillator
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (9) , 5745-5750
Analysis and Suppression of Asymmetric Mode Competition in a Ka-Band Transit Time Oscillator
- 18 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (4) , 2192-2198
Experimental Investigation on a High-Power Ku-Band Relativistic Backward Wave Oscillator Packaged With Compact Permanent Magnets
In defense applications such as electronic warfare, there is an urgent demand for compact Ku-band high-power microwave (HPM) sources. To eliminate dependency on magnetic coils and their power supplies, a Ku-band high-power relativistic backward wave oscillator (RBWO) packaged with compact permanent magnets (PMs) has been designed and experimentally validated. The two-stage slow-wave structure (SWS), along with the overmoded configuration, ensures the device operates efficiently at low magnetic fields. Experimental results demonstrate that the RBWO, using a 0.6-T PM, achieves 1.2-GW stable Ku-band microwave output when driven by the relativistic electron beam with parameters of 590 kV/8.2kA. The system exhibits the power conversion efficiency of 24.8%, while spectral analysis confirms quasi-single-mode operation. This study advances the miniaturization and engineering implementation of Ku-band HPM sources, providing a critical technical solution for integrating HPM systems into small-scale mobile platforms.
- 18 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (4) , 2192-2198
Experimental Investigation on a High-Power Ku-Band Relativistic Backward Wave Oscillator Packaged With Compact Permanent Magnets
In defense applications such as electronic warfare, there is an urgent demand for compact Ku-band high-power microwave (HPM) sources. To eliminate dependency on magnetic coils and their power supplies, a Ku-band high-power relativistic backward wave oscillator (RBWO) packaged with compact permanent magnets (PMs) has been designed and experimentally validated. The two-stage slow-wave structure (SWS), along with the overmoded configuration, ensures the device operates efficiently at low magnetic fields. Experimental results demonstrate that the RBWO, using a 0.6-T PM, achieves 1.2-GW stable Ku-band microwave output when driven by the relativistic electron beam with parameters of 590 kV/8.2kA. The system exhibits the power conversion efficiency of 24.8%, while spectral analysis confirms quasi-single-mode operation. This study advances the miniaturization and engineering implementation of Ku-band HPM sources, providing a critical technical solution for integrating HPM systems into small-scale mobile platforms.
- 29 December 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (6)
A cusped periodic permanent magnet focusing system with a long guiding section for a high impedance relativistic klystron amplifier
In order to achieve the objectives of compactness and lightweight of a high-impedance relativistic klystron amplifier (RKA), along with the lower system energy consumption, a prototype of an integrated cusped periodic permanent magnet (CPPM) system with a long guiding region is proposed and optimized. The design is based on a foiless diode in the X-band high-impedance RKA through theoretical analysis and simulation methods. The entire CPPM focusing system consists of an inner and outer nested permanent magnet group in the cathode region and a periodic permanent magnet group of Halbach structure in the anode region. After optimization, the uniform guiding magnetic field strength and the period of the CPPM are 0.4885T and 4 cm, respectively. The developed CPPM focusing system achieves an exceptionally compact radial footprint of only 6 cm and a lightweight of under 6 kg. The stable electron beam transmission distance is 483 mm from the cathode end to the collector front with the transmission rate of 99 %. With this CPPM focusing system, particle-in-cell simulation research was carried out on the X-band high-impedance RKA. Typical results after simulation optimization show that under the beam of 525.5 kV and 469 A, a microwave output with a power of 90 MW was obtained at a frequency of 11.42 GHz, with an efficiency of 36.5 %. It verifies the feasibility of using the CPPM focusing system instead of the electromagnetic focusing system in the X-band high-impedance RKA. This scheme greatly reduces the weight and energy consumption of the whole system, with practical application prospects.
- 29 December 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (6)
A cusped periodic permanent magnet focusing system with a long guiding section for a high impedance relativistic klystron amplifier
In order to achieve the objectives of compactness and lightweight of a high-impedance relativistic klystron amplifier (RKA), along with the lower system energy consumption, a prototype of an integrated cusped periodic permanent magnet (CPPM) system with a long guiding region is proposed and optimized. The design is based on a foiless diode in the X-band high-impedance RKA through theoretical analysis and simulation methods. The entire CPPM focusing system consists of an inner and outer nested permanent magnet group in the cathode region and a periodic permanent magnet group of Halbach structure in the anode region. After optimization, the uniform guiding magnetic field strength and the period of the CPPM are 0.4885T and 4 cm, respectively. The developed CPPM focusing system achieves an exceptionally compact radial footprint of only 6 cm and a lightweight of under 6 kg. The stable electron beam transmission distance is 483 mm from the cathode end to the collector front with the transmission rate of 99 %. With this CPPM focusing system, particle-in-cell simulation research was carried out on the X-band high-impedance RKA. Typical results after simulation optimization show that under the beam of 525.5 kV and 469 A, a microwave output with a power of 90 MW was obtained at a frequency of 11.42 GHz, with an efficiency of 36.5 %. It verifies the feasibility of using the CPPM focusing system instead of the electromagnetic focusing system in the X-band high-impedance RKA. This scheme greatly reduces the weight and energy consumption of the whole system, with practical application prospects.
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (9) , 2334-2341
Electromagnetic Interference Analysis, Modeling, and Suppression of High-Power Pulse Drive Source
In high-power pulse drive (HPPD) sources, the pulse forming network Marx (PFN-Marx) generates ultra-fast transient overvoltages with steep rising edges and a broad frequency spectrum extending to 100 MHz. Transient interference can propagate via cables into sensitive circuits or radiate through space, impacting nearby equipment. To address the limitations of existing electromagnetic interference (EMI) models and testing standards in accurately characterizing the time–frequency features of ultra-fast transient disturbances, this study systematically investigates the characteristics of interference sources within HPPD systems. The innovative modeling approach integrating interference sources is proposed, leading to the development of a novel transient interference model utilizing attenuated damped oscillation waves. This model effectively captures the characteristics of ultra-fast transient interference and provides a versatile tool for EMI prediction and analysis across different types of HPPD systems. The study offers essential theoretical guidance for electromagnetic compatibility (EMC) design of secondary equipment in high-power pulse systems, greatly enhancing their reliability and safety under challenging electromagnetic conditions.
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (9) , 2334-2341
Electromagnetic Interference Analysis, Modeling, and Suppression of High-Power Pulse Drive Source
In high-power pulse drive (HPPD) sources, the pulse forming network Marx (PFN-Marx) generates ultra-fast transient overvoltages with steep rising edges and a broad frequency spectrum extending to 100 MHz. Transient interference can propagate via cables into sensitive circuits or radiate through space, impacting nearby equipment. To address the limitations of existing electromagnetic interference (EMI) models and testing standards in accurately characterizing the time–frequency features of ultra-fast transient disturbances, this study systematically investigates the characteristics of interference sources within HPPD systems. The innovative modeling approach integrating interference sources is proposed, leading to the development of a novel transient interference model utilizing attenuated damped oscillation waves. This model effectively captures the characteristics of ultra-fast transient interference and provides a versatile tool for EMI prediction and analysis across different types of HPPD systems. The study offers essential theoretical guidance for electromagnetic compatibility (EMC) design of secondary equipment in high-power pulse systems, greatly enhancing their reliability and safety under challenging electromagnetic conditions.
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (10) , 7409-7421
Miniaturized Rectangular Leaky Waveguide Antenna With Fixed-Beam Radiation and High Power-Handling Capacity
A fixed-beam leaky waveguide antenna (LWA) featuring a miniaturized structure for high-power microwave (HPM) applications is proposed in this paper. A wedge-shaped compensation prism is introduced in the radiating aperture of the waveguide to fix the beam direction. The incorporation of this prism generates dual refraction of electromagnetic waves (EMW): first at the waveguide-prism interface, and second at the prism-free space interface. To reduce the transverse dimensions of the prism, a binary dispersion compensation method based on the binary refraction phenomenon of LWA is proposed and deduced. This method also provides flexibility in tailoring the radiating angle. Further investigations are carried out to reduce the maximum electric field strength of the waveguide and the prism for HPM applications. Experimental results demonstrate that the pitch angle of the miniaturized compensation prism is reduced from 30° to 10° and the radiating angle is tailored from 43° to 31.1° in a squint-free bandwidth of 3.9-4.5 GHz by employing the proposed method, with gain stabilizing at 16.6-18.4 dBi. The power-handling capacity (PHC) of the LWA is about 121 MW under the vacuum condition, which is intended for applications in directed HPW scenarios.
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (10) , 7409-7421
Miniaturized Rectangular Leaky Waveguide Antenna With Fixed-Beam Radiation and High Power-Handling Capacity
A fixed-beam leaky waveguide antenna (LWA) featuring a miniaturized structure for high-power microwave (HPM) applications is proposed in this paper. A wedge-shaped compensation prism is introduced in the radiating aperture of the waveguide to fix the beam direction. The incorporation of this prism generates dual refraction of electromagnetic waves (EMW): first at the waveguide-prism interface, and second at the prism-free space interface. To reduce the transverse dimensions of the prism, a binary dispersion compensation method based on the binary refraction phenomenon of LWA is proposed and deduced. This method also provides flexibility in tailoring the radiating angle. Further investigations are carried out to reduce the maximum electric field strength of the waveguide and the prism for HPM applications. Experimental results demonstrate that the pitch angle of the miniaturized compensation prism is reduced from 30° to 10° and the radiating angle is tailored from 43° to 31.1° in a squint-free bandwidth of 3.9-4.5 GHz by employing the proposed method, with gain stabilizing at 16.6-18.4 dBi. The power-handling capacity (PHC) of the LWA is about 121 MW under the vacuum condition, which is intended for applications in directed HPW scenarios.
- 2 June 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (7) , 075502
An annular explosive cathode with a shielding ring for the X-band high-impedance relativistic klystron amplifier
High impedance (>1 kΩ) relativistic klystron amplifiers (RKAs) are able to avoid power capacity limitations with higher conversion efficiency, compared with low impedance RKAs. An annular explosive cathode is investigated to offer moderate density electron beams for an X-band high-impedance RKA. Instead of a traditional solid thermionic cathode applied to a high-impedance RKA, the annular explosive cathode is able to simplify and minimize its conventional electron optics system. Nevertheless, the impedance of explosive cathode is hardly to achieve as high as kΩ level. A shielding ring is introduced to realize the high impedance of 1.15 kΩ and reduce the surface electric field on unexpected explosive emission region. Analysis of the explosive cathode employed in the X-band high-impedance RKA are described. The fine performance of this RKA is demonstrated by 2.5-D particle-in-cell (PIC) simulations. The typical microwaves with a power of 100 MW are generated at a frequency of 11.424 GHz when the beam voltage and current are 527 kV and 457 A respectively, under a guiding magnetic field of 0.55 T. The corresponding power conversion efficiency and gain are as high as 42% and 50 dB.
- 2 June 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (7) , 075502
An annular explosive cathode with a shielding ring for the X-band high-impedance relativistic klystron amplifier
High impedance (>1 kΩ) relativistic klystron amplifiers (RKAs) are able to avoid power capacity limitations with higher conversion efficiency, compared with low impedance RKAs. An annular explosive cathode is investigated to offer moderate density electron beams for an X-band high-impedance RKA. Instead of a traditional solid thermionic cathode applied to a high-impedance RKA, the annular explosive cathode is able to simplify and minimize its conventional electron optics system. Nevertheless, the impedance of explosive cathode is hardly to achieve as high as kΩ level. A shielding ring is introduced to realize the high impedance of 1.15 kΩ and reduce the surface electric field on unexpected explosive emission region. Analysis of the explosive cathode employed in the X-band high-impedance RKA are described. The fine performance of this RKA is demonstrated by 2.5-D particle-in-cell (PIC) simulations. The typical microwaves with a power of 100 MW are generated at a frequency of 11.424 GHz when the beam voltage and current are 527 kV and 457 A respectively, under a guiding magnetic field of 0.55 T. The corresponding power conversion efficiency and gain are as high as 42% and 50 dB.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (7) , 4253-4258
A Backward-Triggered 4H-SiC Photoconductive Semiconductor Switch With Planar Electrode Structure
The power capacity of a photoconductive semiconductor switch with the planar electrode is limited by surface breakdown voltage. In this work, an efficient thinned 4H-SiC PCSS with a planar electrode backward-triggered structure was fabricated. Comparison simulations on the photocurrent density and electric field showed that the distribution of photogenerated carriers was homogenized, and the maximum electric field declined. By thinning and polishing, photoconductive semiconductor switch (PCSS) devices with thicknesses of 50 and 500 $\mu $ m were obtained for experiments. Triggered by a 355-nm laser, it demonstrated that the photocurrent of the backward-triggered PCSS device was basically equivalent to the origin planar structure. Meanwhile, the withstand voltage of PCSS devices significantly increased from 5.5 to 8 kV. The results proved that the backward-triggered structure can optimize the photocurrent of PCSS devices from 37 to 41 A while ensuring the photoelectric output efficiency. The failure mechanisms were also investigated with several analysis methods. Under a strong electric field, the devices were damaged due to the thermal stress caused by local field concentration. The characterization analysis results further demonstrated the importance of optimizing electrode configuration to decrease the electric field distribution at the electrode edge. This work is of great significance for PCSS devices on high-power applications.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (7) , 4253-4258
A Backward-Triggered 4H-SiC Photoconductive Semiconductor Switch With Planar Electrode Structure
The power capacity of a photoconductive semiconductor switch with the planar electrode is limited by surface breakdown voltage. In this work, an efficient thinned 4H-SiC PCSS with a planar electrode backward-triggered structure was fabricated. Comparison simulations on the photocurrent density and electric field showed that the distribution of photogenerated carriers was homogenized, and the maximum electric field declined. By thinning and polishing, photoconductive semiconductor switch (PCSS) devices with thicknesses of 50 and 500 $\mu $ m were obtained for experiments. Triggered by a 355-nm laser, it demonstrated that the photocurrent of the backward-triggered PCSS device was basically equivalent to the origin planar structure. Meanwhile, the withstand voltage of PCSS devices significantly increased from 5.5 to 8 kV. The results proved that the backward-triggered structure can optimize the photocurrent of PCSS devices from 37 to 41 A while ensuring the photoelectric output efficiency. The failure mechanisms were also investigated with several analysis methods. Under a strong electric field, the devices were damaged due to the thermal stress caused by local field concentration. The characterization analysis results further demonstrated the importance of optimizing electrode configuration to decrease the electric field distribution at the electrode edge. This work is of great significance for PCSS devices on high-power applications.