Yuzhang Yuan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuzhang Yuan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Jin Meng
Naval University of Engineering
13 shared publications - Danni Zhu
National Key Laboratory of Science and Technology on Vessel Integrated Power System, Naval University of Engineering, Wuhan, China
10 shared publications - Haitao Wang
Naval University of Engineering
10 shared publications - Yancheng Cui
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China
10 shared publications - Liyang Huang
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China
5 shared publications - Bingfang Deng
Naval University of Engineering
3 shared publications
Latest Publications
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (9) , 2334-2341
Electromagnetic Interference Analysis, Modeling, and Suppression of High-Power Pulse Drive Source
In high-power pulse drive (HPPD) sources, the pulse forming network Marx (PFN-Marx) generates ultra-fast transient overvoltages with steep rising edges and a broad frequency spectrum extending to 100 MHz. Transient interference can propagate via cables into sensitive circuits or radiate through space, impacting nearby equipment. To address the limitations of existing electromagnetic interference (EMI) models and testing standards in accurately characterizing the time–frequency features of ultra-fast transient disturbances, this study systematically investigates the characteristics of interference sources within HPPD systems. The innovative modeling approach integrating interference sources is proposed, leading to the development of a novel transient interference model utilizing attenuated damped oscillation waves. This model effectively captures the characteristics of ultra-fast transient interference and provides a versatile tool for EMI prediction and analysis across different types of HPPD systems. The study offers essential theoretical guidance for electromagnetic compatibility (EMC) design of secondary equipment in high-power pulse systems, greatly enhancing their reliability and safety under challenging electromagnetic conditions.
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (9) , 2334-2341
Electromagnetic Interference Analysis, Modeling, and Suppression of High-Power Pulse Drive Source
In high-power pulse drive (HPPD) sources, the pulse forming network Marx (PFN-Marx) generates ultra-fast transient overvoltages with steep rising edges and a broad frequency spectrum extending to 100 MHz. Transient interference can propagate via cables into sensitive circuits or radiate through space, impacting nearby equipment. To address the limitations of existing electromagnetic interference (EMI) models and testing standards in accurately characterizing the time–frequency features of ultra-fast transient disturbances, this study systematically investigates the characteristics of interference sources within HPPD systems. The innovative modeling approach integrating interference sources is proposed, leading to the development of a novel transient interference model utilizing attenuated damped oscillation waves. This model effectively captures the characteristics of ultra-fast transient interference and provides a versatile tool for EMI prediction and analysis across different types of HPPD systems. The study offers essential theoretical guidance for electromagnetic compatibility (EMC) design of secondary equipment in high-power pulse systems, greatly enhancing their reliability and safety under challenging electromagnetic conditions.
- 5 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (8) , 531-534
Influence of Nitrogen Doping in Vanadium- Compensated 4H-SiC on Transient Photocurrent Response for Photoconductive Microwave Generation
High-frequency microwave generation based on PCSS devices requires the fastest possible response speed. In this study, we successfully demonstrated controlled donor level doping in 4H-SiC PCSS devices to reduce the carrier recombination lifetime and enhance high-frequency microwave generation. PCSSs with three different doping of nitrogen concentrations were manufactured and compared. By femtosecond transient absorption spectroscopy (fs-TAS), we observed that the 4H-SiC PCSS devices doped with lower nitrogen concentrations exhibited significantly shorter carrier recombination lifetime and faster response speed, ranging from 137 ps to 118 ps. Furthermore, experiment results demonstrate that if nitrogen doping concentration was below 10 16 cm -3 , the PCSS devices could generate high-frequency microwave up to 10 GHz, with improved response speed and higher photoelectric efficiency. Consequently, by precisely controlling the nitrogen concentration, it is feasible to enhance the response frequency of photoconductive microwaves.
- 5 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (8) , 531-534
Influence of Nitrogen Doping in Vanadium- Compensated 4H-SiC on Transient Photocurrent Response for Photoconductive Microwave Generation
High-frequency microwave generation based on PCSS devices requires the fastest possible response speed. In this study, we successfully demonstrated controlled donor level doping in 4H-SiC PCSS devices to reduce the carrier recombination lifetime and enhance high-frequency microwave generation. PCSSs with three different doping of nitrogen concentrations were manufactured and compared. By femtosecond transient absorption spectroscopy (fs-TAS), we observed that the 4H-SiC PCSS devices doped with lower nitrogen concentrations exhibited significantly shorter carrier recombination lifetime and faster response speed, ranging from 137 ps to 118 ps. Furthermore, experiment results demonstrate that if nitrogen doping concentration was below 10 16 cm -3 , the PCSS devices could generate high-frequency microwave up to 10 GHz, with improved response speed and higher photoelectric efficiency. Consequently, by precisely controlling the nitrogen concentration, it is feasible to enhance the response frequency of photoconductive microwaves.
- 1 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2676-2682
Test and Analysis on the Gyromagnetic Nonlinear Transmission Lines With Different Magnetic Cores
Miniaturization and frequency tunability have become two important development directions of high-power microwave technology. The wideband high-power microwave system based on gyromagnetic nonlinear transmission line (GNLTL) has been proven to have the potential to produce smaller physical size and lighter weight. The GNLTL is a special wideband source whose output frequency can be tuned online by changing the biasing magnetic field. The working mechanism of a GNLTL is related to the damping precession of magnetic moments, and the parameters of magnetic material have important effects on the output microwaves. However, the details of these effects are still not fully clear. This article tested and analyzed the effects of three key gyromagnetic parameters on the output microwaves, namely, saturation magnetization ( $\textit{M}_{\textit{s}}$ ), spin wave linewidth ( $\Delta\textit{H}_{\textit{k}}$ ), and ferromagnetic resonance (FMR) linewidth ( $\Delta\textit{H}$ ). The results showed that the cores with higher $\textit{M}_{\textit{s}}$ and lower $\Delta \textit{H}$ help to increase the peak power. The spin wave linewidth $\Delta \textit{H}_{\textit{k}}$ has little effect on the peak power, but the cores with lower $\Delta\textit{H}_{\textit{k}}$ can expand the frequency tuning range. The experimental results and theoretical analyses help to the selection of magnetic cores and the predesign of the GNLTLs.
- 1 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2676-2682
Test and Analysis on the Gyromagnetic Nonlinear Transmission Lines With Different Magnetic Cores
Miniaturization and frequency tunability have become two important development directions of high-power microwave technology. The wideband high-power microwave system based on gyromagnetic nonlinear transmission line (GNLTL) has been proven to have the potential to produce smaller physical size and lighter weight. The GNLTL is a special wideband source whose output frequency can be tuned online by changing the biasing magnetic field. The working mechanism of a GNLTL is related to the damping precession of magnetic moments, and the parameters of magnetic material have important effects on the output microwaves. However, the details of these effects are still not fully clear. This article tested and analyzed the effects of three key gyromagnetic parameters on the output microwaves, namely, saturation magnetization ( $\textit{M}_{\textit{s}}$ ), spin wave linewidth ( $\Delta\textit{H}_{\textit{k}}$ ), and ferromagnetic resonance (FMR) linewidth ( $\Delta\textit{H}$ ). The results showed that the cores with higher $\textit{M}_{\textit{s}}$ and lower $\Delta \textit{H}$ help to increase the peak power. The spin wave linewidth $\Delta \textit{H}_{\textit{k}}$ has little effect on the peak power, but the cores with lower $\Delta\textit{H}_{\textit{k}}$ can expand the frequency tuning range. The experimental results and theoretical analyses help to the selection of magnetic cores and the predesign of the GNLTLs.
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2656-2661
Experimental Investigation of a Ku-Band Coaxial Transit Time Oscillator on Low Magnetic Field Operation
Low guiding magnetic field is conducive to miniaturization of high-power microwave (HPM) generators in the Ku -band, especially when they are designed to be suitable for lightweight permanent magnet packages. The Ku -band coaxial HPM generator proposed in this article is based on the transit-time effect. The coaxial structure can increase the radial dimensions of the device, thereby reducing the electron beam density and diminishing its requirement for magnetic field strength. The generator has a small number of cavities, and the compact structure is accompanied by a short uniform magnetic field area, which reduces the weight of the exciting coil and has the potential for lightweight permanent magnet packaging. At the low guiding magnetic field of 0.35 T, the microwave pulse with power of 644 MW, pulse duration of 36 ns, frequency of 12.84 GHz, and efficiency of 18.9% is generated in the experiment.
- 19 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (4) , 2656-2661
Experimental Investigation of a Ku-Band Coaxial Transit Time Oscillator on Low Magnetic Field Operation
Low guiding magnetic field is conducive to miniaturization of high-power microwave (HPM) generators in the Ku -band, especially when they are designed to be suitable for lightweight permanent magnet packages. The Ku -band coaxial HPM generator proposed in this article is based on the transit-time effect. The coaxial structure can increase the radial dimensions of the device, thereby reducing the electron beam density and diminishing its requirement for magnetic field strength. The generator has a small number of cavities, and the compact structure is accompanied by a short uniform magnetic field area, which reduces the weight of the exciting coil and has the potential for lightweight permanent magnet packaging. At the low guiding magnetic field of 0.35 T, the microwave pulse with power of 644 MW, pulse duration of 36 ns, frequency of 12.84 GHz, and efficiency of 18.9% is generated in the experiment.
- 5 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3885-3891
A Compact Gigawatt Pulsed Power Generator for High-Power Microwave Application
Nanosecond square voltage pulse is of wide interest because of its potential military and industrial applications, such as high-power microwave (HPM). In this article, a gigawatt pulsed power generator (PPG) for HPM based on the multistage pulse forming networks (PFNs) with a voltage superposition using the Marx scheme, i.e., PFN-Marx generator, is proposed through the theory analysis, numerical simulation, processing manufacturing, and performance experiment. The PPG consists of the main subsystems of the primary power and pulse modulation subsystems. The primary power subsystem is a modular bipolar dc high-voltage generator based on the ac–dc–ac, high-frequency transformer, and voltage multipliers by using the power electronics switches. It can generate bipolar dc high voltage of ±42 kV to charge the PFN-Marx generator. As for the pulse modulation subsystem, the PFN-Marx technique is preferred, which consists of 24-stage and six ${L}$ - ${C}$ sections. To verify the PPG, an experimental prototype is fabricated and tested. It has a characteristic impedance of about $40~\boldsymbol \Omega $ and can deliver square voltage wave with an output voltage pulse of about 500 kV, full-width at half-maximum (FWHM) of 94 ns, and 10%–90% rise time of fewer than 35 ns, indicating its ability to deliver peak power beyond 6.25 GW. In addition, a transit-time oscillator was connected and can radiate microwave power of 0.8 GW at 12.89 GHz for the cathode voltage of 372 kV and the beam current of 9.3 kA.
- 5 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (7) , 3885-3891
A Compact Gigawatt Pulsed Power Generator for High-Power Microwave Application
Nanosecond square voltage pulse is of wide interest because of its potential military and industrial applications, such as high-power microwave (HPM). In this article, a gigawatt pulsed power generator (PPG) for HPM based on the multistage pulse forming networks (PFNs) with a voltage superposition using the Marx scheme, i.e., PFN-Marx generator, is proposed through the theory analysis, numerical simulation, processing manufacturing, and performance experiment. The PPG consists of the main subsystems of the primary power and pulse modulation subsystems. The primary power subsystem is a modular bipolar dc high-voltage generator based on the ac–dc–ac, high-frequency transformer, and voltage multipliers by using the power electronics switches. It can generate bipolar dc high voltage of ±42 kV to charge the PFN-Marx generator. As for the pulse modulation subsystem, the PFN-Marx technique is preferred, which consists of 24-stage and six ${L}$ - ${C}$ sections. To verify the PPG, an experimental prototype is fabricated and tested. It has a characteristic impedance of about $40~\boldsymbol \Omega $ and can deliver square voltage wave with an output voltage pulse of about 500 kV, full-width at half-maximum (FWHM) of 94 ns, and 10%–90% rise time of fewer than 35 ns, indicating its ability to deliver peak power beyond 6.25 GW. In addition, a transit-time oscillator was connected and can radiate microwave power of 0.8 GW at 12.89 GHz for the cathode voltage of 372 kV and the beam current of 9.3 kA.
- 3 May 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (6) , 065301
A high-efficiency C-band coaxial transit time oscillator with a dual-cavity extractor under low-magnetic fields
A high-efficiency C-band coaxial transit time oscillator with a dual-cavity extractor under low-magnetic fields is designed and studied through small-signal theory and particle-in-cell simulation. Small-signal theory analysis indicates that a dual-cavity extractor is superior to a single-cavity extractor in terms of the beam-coupling coefficient, the resonant frequency, and the external quality factor, which are good for high efficiency. Typical simulation results of the proposed device show that an output power of 1.73 GW and a frequency of 6.37 GHz can be obtained with a diode voltage of 455 kV and current of 9.75 kA. The corresponding power efficiency reaches 39%, and the guiding magnetic field is 0.8 T. Further simulation demonstrates that the power efficiency exceeds 34% in a rather large range of diode voltage from 385 kV to 470 kV and can reach higher than 35% with a low guiding magnetic field of 0.4 T. Then this coaxial transit time oscillator is compared with the typical relativistic backward wave oscillators from the magnetic field, efficiency and power saturation time.
- 3 May 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (6) , 065301
A high-efficiency C-band coaxial transit time oscillator with a dual-cavity extractor under low-magnetic fields
A high-efficiency C-band coaxial transit time oscillator with a dual-cavity extractor under low-magnetic fields is designed and studied through small-signal theory and particle-in-cell simulation. Small-signal theory analysis indicates that a dual-cavity extractor is superior to a single-cavity extractor in terms of the beam-coupling coefficient, the resonant frequency, and the external quality factor, which are good for high efficiency. Typical simulation results of the proposed device show that an output power of 1.73 GW and a frequency of 6.37 GHz can be obtained with a diode voltage of 455 kV and current of 9.75 kA. The corresponding power efficiency reaches 39%, and the guiding magnetic field is 0.8 T. Further simulation demonstrates that the power efficiency exceeds 34% in a rather large range of diode voltage from 385 kV to 470 kV and can reach higher than 35% with a low guiding magnetic field of 0.4 T. Then this coaxial transit time oscillator is compared with the typical relativistic backward wave oscillators from the magnetic field, efficiency and power saturation time.
- 6 February 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (3) , 035302
Investigating emission characteristics and plasma properties in a long-pulse magnetically insulated coaxial diode with different cathode materials
Magnetically insulated coaxial diodes are widely used in O-type high power microwave device for intensive annular electron beam generation. This study reports on a series of electrical and optical measurements on a long-pulse magnetically insulated coaxial diodes in which the emission characteristics and the plasma properties were observed. The impact of cathode material, blade angle, diode voltage and guiding magnetic field on the emission characteristics and the plasma properties of six types of annular cathodes were studied. Two configurations of these cathodes have been used, one with a sharp edge for aluminum, bronze, graphite, stainless-steel, silicon-aluminum alloy and another metal–dielectric. The impressing diode performance was achieved with the metal-dielectric cathode characterized on the excellent emission characteristics and plasma properties. Moreover, high voltage and small blade angle are beneficial to the emission capability and emission uniformity. For the cathode with smaller blade angle, its axial plasma expansion velocity is smaller during the pulse plateau. The strong magnetic field or the large diode voltage is confirmed to reduce the axial and radial expansion velocities.
- 6 February 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (3) , 035302
Investigating emission characteristics and plasma properties in a long-pulse magnetically insulated coaxial diode with different cathode materials
Magnetically insulated coaxial diodes are widely used in O-type high power microwave device for intensive annular electron beam generation. This study reports on a series of electrical and optical measurements on a long-pulse magnetically insulated coaxial diodes in which the emission characteristics and the plasma properties were observed. The impact of cathode material, blade angle, diode voltage and guiding magnetic field on the emission characteristics and the plasma properties of six types of annular cathodes were studied. Two configurations of these cathodes have been used, one with a sharp edge for aluminum, bronze, graphite, stainless-steel, silicon-aluminum alloy and another metal–dielectric. The impressing diode performance was achieved with the metal-dielectric cathode characterized on the excellent emission characteristics and plasma properties. Moreover, high voltage and small blade angle are beneficial to the emission capability and emission uniformity. For the cathode with smaller blade angle, its axial plasma expansion velocity is smaller during the pulse plateau. The strong magnetic field or the large diode voltage is confirmed to reduce the axial and radial expansion velocities.
- 25 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (5) , 1188-1197
Numerical Analysis on the RF Characteristics of the Gyromagnetic Nonlinear Transmission Lines
The gyromagnetic nonlinear transmission line (GNLTL) is a special transmission line loaded with ferrite cores, which can be used as a kind of wideband high-power microwave (HPM) source due to the pulse modulation mechanism. This article carried out a series of simulations and analyses focused on the RF characteristics of GNLTL. Based on the classic transmission line model (TLM) method, a numerical model linking the transmission line equations and the microscopic magnetization dynamics equations was established. The simulations systematically studied the effects of key parameters on the output characteristics especially the RF characteristics, including the effects of transmission line geometry, excitation pulse, magnetic material, and the biasing magnetic field. The simulation results and analyses revealed that almost each parameter has effects on the output, and the effects of different parameters are different. The research introduced in this article preliminarily reveals how the output microwave varies with the parameters and provides a method to find the appropriate parameter values of a GNLTL.
- 25 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (5) , 1188-1197
Numerical Analysis on the RF Characteristics of the Gyromagnetic Nonlinear Transmission Lines
The gyromagnetic nonlinear transmission line (GNLTL) is a special transmission line loaded with ferrite cores, which can be used as a kind of wideband high-power microwave (HPM) source due to the pulse modulation mechanism. This article carried out a series of simulations and analyses focused on the RF characteristics of GNLTL. Based on the classic transmission line model (TLM) method, a numerical model linking the transmission line equations and the microscopic magnetization dynamics equations was established. The simulations systematically studied the effects of key parameters on the output characteristics especially the RF characteristics, including the effects of transmission line geometry, excitation pulse, magnetic material, and the biasing magnetic field. The simulation results and analyses revealed that almost each parameter has effects on the output, and the effects of different parameters are different. The research introduced in this article preliminarily reveals how the output microwave varies with the parameters and provides a method to find the appropriate parameter values of a GNLTL.
- 23 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (1) , 23-28
Minimum Spatial Filling Rate of the Ferrite Required to Excite the Microwave Oscillations in the Gyromagnetic NLTL
The gyromagnetic nonlinear transmission line (NLTL) is a promising compact, solid-state, and frequency-agile high-power microwave (HPM) source. This article discusses the minimum spatial filling rate of the ferrite required to excite the microwave oscillations in the gyromagnetic NLTL based on simultaneously solving Maxwell’s equation and Landau–Lifshitz–Gilbert (LLG) equation in the 2-D cylindrical coordinate system. The results reveal that the different filling rate of the ferrite affects the output waveforms. When the filling rate of the ferrite is lower than 50%, the gyromagnetic NLTL is not able to excite significant oscillations. With the increase of the filling rate, the oscillations become more and more violent. Moreover, the influences of the inner radius of the outer conductor and the dielectric materials are also studied in this article. It is found that with the inner radius of the outer conductor increasing, the oscillations are reduced. The dielectric materials have no significant effects on the performance of the gyromagnetic NLTL when the gyromagnetic NLTL is long enough. This kind of characteristic is important for engineering design.
- 23 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (1) , 23-28
Minimum Spatial Filling Rate of the Ferrite Required to Excite the Microwave Oscillations in the Gyromagnetic NLTL
The gyromagnetic nonlinear transmission line (NLTL) is a promising compact, solid-state, and frequency-agile high-power microwave (HPM) source. This article discusses the minimum spatial filling rate of the ferrite required to excite the microwave oscillations in the gyromagnetic NLTL based on simultaneously solving Maxwell’s equation and Landau–Lifshitz–Gilbert (LLG) equation in the 2-D cylindrical coordinate system. The results reveal that the different filling rate of the ferrite affects the output waveforms. When the filling rate of the ferrite is lower than 50%, the gyromagnetic NLTL is not able to excite significant oscillations. With the increase of the filling rate, the oscillations become more and more violent. Moreover, the influences of the inner radius of the outer conductor and the dielectric materials are also studied in this article. It is found that with the inner radius of the outer conductor increasing, the oscillations are reduced. The dielectric materials have no significant effects on the performance of the gyromagnetic NLTL when the gyromagnetic NLTL is long enough. This kind of characteristic is important for engineering design.
- 1 December 2021
- Published by IOP Publishing in Physica Scripta
- Vol. 96 (12) , 125635
Design and simulation of a compact Ku-band RTTO with power divider extraction structure
The radial transit time oscillator (RTTO) has attracted much attention because of its high power capacity and pure mode of output microwave. To make the high power microwave (HPM) source devices more compact and to enable it to measure the output microwave mode quantitatively, this paper proposed a compact Ku-band RTTO with the power divider extraction structure (PDES). The radial decreasing magnetic field is applied to decreasing the mass of excitation system. Compared the conventional uniform solenoids, it can reduce the mass by about 30%. In the coaxial output waveguide, the PDES is used instead of the traditional support rods connecting the inner and outer conductors so as to convert TEM mode into TE 10 mode efficiently. This structure can not only help shorten the axial dimension of the device, but also make it possible to measure the output microwave mode more accurately online. In particle-in-cell (PIC) simulation, the proposed Ku-band RTTO can output HPMs with the power of 3.05 GW and the frequency of 14.36 GHz, and the working efficiency is 40.3%. The maximum radial electric field intensity in the extraction cavity is 0.92 MV/cm, and the maximum electric field intensity in the PDES is 0.52 MV/cm, both of which are lower than the radio frequency (RF) breakdown threshold of metal materials.
- 1 December 2021
- Published by IOP Publishing in Physica Scripta
- Vol. 96 (12) , 125635
Design and simulation of a compact Ku-band RTTO with power divider extraction structure
The radial transit time oscillator (RTTO) has attracted much attention because of its high power capacity and pure mode of output microwave. To make the high power microwave (HPM) source devices more compact and to enable it to measure the output microwave mode quantitatively, this paper proposed a compact Ku-band RTTO with the power divider extraction structure (PDES). The radial decreasing magnetic field is applied to decreasing the mass of excitation system. Compared the conventional uniform solenoids, it can reduce the mass by about 30%. In the coaxial output waveguide, the PDES is used instead of the traditional support rods connecting the inner and outer conductors so as to convert TEM mode into TE 10 mode efficiently. This structure can not only help shorten the axial dimension of the device, but also make it possible to measure the output microwave mode more accurately online. In particle-in-cell (PIC) simulation, the proposed Ku-band RTTO can output HPMs with the power of 3.05 GW and the frequency of 14.36 GHz, and the working efficiency is 40.3%. The maximum radial electric field intensity in the extraction cavity is 0.92 MV/cm, and the maximum electric field intensity in the PDES is 0.52 MV/cm, both of which are lower than the radio frequency (RF) breakdown threshold of metal materials.