Christopher M. Collier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Christopher M. Collier has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- C. Harrison Brodie
School of Engineering, The University of British Columbia, Kelowna, BC, Canada
6 shared publications - Camille André Leclerc
Collier Research Group, School of Engineering, The University of British Columbia, Kelowna, BC, Canada
5 shared publications Rick Bosma
School of Engineering, Faculty of Applied Science, The University of British Columbia, Okanagan Campus, Kelowna, Canada
5 shared publicationsC. Harrison Brodie
Collier Research Group, School of Engineering, Faculty of Applied Science, The University of British Columbia, Kelowna, Canada
4 shared publicationsIsaac Spotts
School of Engineering, The University of British Columbia, Kelowna, BC, Canada
4 shared publications- Jasen Devasagayam
School of Engineering University of British Columbia Kelowna BC Canada
4 shared publications
Latest Publications
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on AgriFood Electronics
- Vol. PP (2) , 1-8
A Dairy Antibiotic Sensor: Actuation Through Microchip Electrophoresis and Detection by Lock-in Amplification and Fluorescence Spectroscopy
This work develops a microfluidic antibiotic sensor based on microchip electrophoresis integrated with lock-in amplification. The microfluidic antibiotic sensor is for dairy antibiotic sensing and is compact, achieves high signal-to-noise ratios (SNR), has precise analyte actuation, uses pico-liter-scale sample volumes, and avoids sample pretreatment. We compare the SNR of ciprofloxacin hydrochloride monohydrate (CPFH) antibiotic fluorescence measurements of this sensor to a benchmark sensor without lock-in amplification. We provide the response curve of CPFH for the developed microfluidic antibiotic sensor. We provide the limit-of-detection of CPFH for this sensor through various methods and compare this limit of detection to other microchip electrophoresis and droplet-based dairy antibiotic sensors. Overall, the developed food contaminant sensor performs favorably in relation to other sensors.
- 21 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on AgriFood Electronics
- Vol. PP (2) , 1-8
A Dairy Antibiotic Sensor: Actuation Through Microchip Electrophoresis and Detection by Lock-in Amplification and Fluorescence Spectroscopy
This work develops a microfluidic antibiotic sensor based on microchip electrophoresis integrated with lock-in amplification. The microfluidic antibiotic sensor is for dairy antibiotic sensing and is compact, achieves high signal-to-noise ratios (SNR), has precise analyte actuation, uses pico-liter-scale sample volumes, and avoids sample pretreatment. We compare the SNR of ciprofloxacin hydrochloride monohydrate (CPFH) antibiotic fluorescence measurements of this sensor to a benchmark sensor without lock-in amplification. We provide the response curve of CPFH for the developed microfluidic antibiotic sensor. We provide the limit-of-detection of CPFH for this sensor through various methods and compare this limit of detection to other microchip electrophoresis and droplet-based dairy antibiotic sensors. Overall, the developed food contaminant sensor performs favorably in relation to other sensors.
- 29 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 35 (1) , 67-77
Microcapillary Electrophoresis Device Fabrication Using Ultraviolet Laser Ablation: Application for Detection of Levofloxacin in Dairy
This work explores a fabrication technique for producing glass-based microfluidic devices for the purpose of performing capillary electrophoresis analysis of biochemical samples, including the detection of fluoroquinolone-class antibiotics in cow’s milk. This exploration employs ultraviolet laser ablation to produce high-quality microcapillaries in two low-cost glass substrates: soda-lime glass and borosilicate glass. This technique enables the in-house fabrication of such devices without the need for caustic chemical etchants and yields smooth channel surfaces capable of inducing electroosmotic flow. This study provides a thorough characterization of the laser milling system, demonstrating the relationship between optical fluence and microchannel cut depth and quality. Furthermore, a practical application of the microfluidic device is demonstrated experimentally via an electrophoretic separation of a cow’s milk sample containing the antibiotic levofloxacin. This experiment showed a detection time of less than 5 minutes. [2025-0131]
- 29 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 35 (1) , 67-77
Microcapillary Electrophoresis Device Fabrication Using Ultraviolet Laser Ablation: Application for Detection of Levofloxacin in Dairy
This work explores a fabrication technique for producing glass-based microfluidic devices for the purpose of performing capillary electrophoresis analysis of biochemical samples, including the detection of fluoroquinolone-class antibiotics in cow’s milk. This exploration employs ultraviolet laser ablation to produce high-quality microcapillaries in two low-cost glass substrates: soda-lime glass and borosilicate glass. This technique enables the in-house fabrication of such devices without the need for caustic chemical etchants and yields smooth channel surfaces capable of inducing electroosmotic flow. This study provides a thorough characterization of the laser milling system, demonstrating the relationship between optical fluence and microchannel cut depth and quality. Furthermore, a practical application of the microfluidic device is demonstrated experimentally via an electrophoretic separation of a cow’s milk sample containing the antibiotic levofloxacin. This experiment showed a detection time of less than 5 minutes. [2025-0131]
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (3) , 149-152
Terahertz Polarization-Resolved Single Pixel Imaging of Wood Materials With Complex Defects
Terahertz imaging is a promising modality for non-destructive evaluation and quality control of wood building materials, particularly given the polarization-specific responses of wood. Single pixel imaging allows efficient, low-cost configurations—crucial for evolving terahertz systems approaching adoption in industry. In this work, a polarization-resolved terahertz single pixel imaging system, with a source frequency of 0.29 THz, is used to identify complex defects in wood materials. The recovered polarization-resolved terahertz images successfully locate and map the structure of wood knots 3 mm in diameter, concealed shallow cuts 1 mm deep, and growth ring structures throughout the material. This work demonstrates an effective application of polarization-resolved terahertz single pixel imaging for non-destructive wood product inspection.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (3) , 149-152
Terahertz Polarization-Resolved Single Pixel Imaging of Wood Materials With Complex Defects
Terahertz imaging is a promising modality for non-destructive evaluation and quality control of wood building materials, particularly given the polarization-specific responses of wood. Single pixel imaging allows efficient, low-cost configurations—crucial for evolving terahertz systems approaching adoption in industry. In this work, a polarization-resolved terahertz single pixel imaging system, with a source frequency of 0.29 THz, is used to identify complex defects in wood materials. The recovered polarization-resolved terahertz images successfully locate and map the structure of wood knots 3 mm in diameter, concealed shallow cuts 1 mm deep, and growth ring structures throughout the material. This work demonstrates an effective application of polarization-resolved terahertz single pixel imaging for non-destructive wood product inspection.
- Open Access
- 1 July 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (7)
Polarization-resolved terahertz time-domain imaging enabled by single pixel imaging
This work presents an efficient far-field single pixel imaging (SPI) system adapted to broadband, pulsed terahertz (THz) detection to successfully reconstruct polarization-resolved hyperspectral THz images of a polarizing sample of varying thickness. Polarizing S-cyclic Hadamard masks are used to efficiently encode the pulsed imaging beam polarization prior to interaction with the sample. In the reconstructed images, 320-ps-duration THz pulses are reconstructed for each spatial pixel. The corresponding hyperspectral THz images are then examined at frequencies between 0.10 and 1.00 THz with a frequency resolution of 3 GHz. A 17 × 19 three-dimensional image is presented to summarize the amplitude and phase of the reconstructed hyperspectral THz images in order to measure the refractive index and extinction coefficient of the sample polymethyl methacrylate material. Diffractive effects relating imaging wavelength and SPI mask pixel dimension are explored, in which diffraction broadening is significant for pixel sizes less than 1.2 wavelengths. This work has the potential to be the basis for future polarization-resolved THz imagers, particularly for those utilizing a single detector.
- 1 July 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (7)
Open AccessPolarization-resolved terahertz time-domain imaging enabled by single pixel imaging
This work presents an efficient far-field single pixel imaging (SPI) system adapted to broadband, pulsed terahertz (THz) detection to successfully reconstruct polarization-resolved hyperspectral THz images of a polarizing sample of varying thickness. Polarizing S-cyclic Hadamard masks are used to efficiently encode the pulsed imaging beam polarization prior to interaction with the sample. In the reconstructed images, 320-ps-duration THz pulses are reconstructed for each spatial pixel. The corresponding hyperspectral THz images are then examined at frequencies between 0.10 and 1.00 THz with a frequency resolution of 3 GHz. A 17 × 19 three-dimensional image is presented to summarize the amplitude and phase of the reconstructed hyperspectral THz images in order to measure the refractive index and extinction coefficient of the sample polymethyl methacrylate material. Diffractive effects relating imaging wavelength and SPI mask pixel dimension are explored, in which diffraction broadening is significant for pixel sizes less than 1.2 wavelengths. This work has the potential to be the basis for future polarization-resolved THz imagers, particularly for those utilizing a single detector.
- Open Access
- 13 February 2025
- Published by Wiley in Electrophoresis
- Vol. 46 (3-4) , 143-151
Surfactant‐Based Polymer Microchip Electrophoresis of Ciprofloxacin Hydrochloride Monohydrate in Unfiltered Milk With Fluorescence Detection
This work describes a cross‐shaped PMMA ME system capable of detecting ciprofloxacin hydrochloride monohydrate (CPFH) in unfiltered milk samples. The cross‐shaped PMMA ME system utilizes a BGE consisting primarily of the surface‐active agent SDS to solubilize milk fat and improve the zeta potential of the PMMA microchannel surface. A theoretical lumped‐element circuit model for cross‐shaped ME is introduced in this work to calculate the migration time of CPFH. This manuscript improves the capabilities of PMMA‐based ME for CPFH in milk using an SDS‐based BGE. The presented ME system has a faster migration time, higher mean output voltage, and thinner full‐width at half‐maximum than previously reported dairy‐based biosensor systems. Most notably, the migration time of the new system is under 10 min, being the time associated with the milking of cattle. The system is also found to be able to detect the presence of milk fat. Discussion is included of potential future integration with existing high‐sensitivity methodologies to place the overall ME system's limit of detection below an established target. To the authors’ knowledge, this is the first reported account of a PMMA ME system capable of detecting CPFH in unfiltered milk.
- 13 February 2025
- Published by Wiley in Electrophoresis
- Vol. 46 (3-4) , 143-151
Open AccessSurfactant‐Based Polymer Microchip Electrophoresis of Ciprofloxacin Hydrochloride Monohydrate in Unfiltered Milk With Fluorescence Detection
This work describes a cross‐shaped PMMA ME system capable of detecting ciprofloxacin hydrochloride monohydrate (CPFH) in unfiltered milk samples. The cross‐shaped PMMA ME system utilizes a BGE consisting primarily of the surface‐active agent SDS to solubilize milk fat and improve the zeta potential of the PMMA microchannel surface. A theoretical lumped‐element circuit model for cross‐shaped ME is introduced in this work to calculate the migration time of CPFH. This manuscript improves the capabilities of PMMA‐based ME for CPFH in milk using an SDS‐based BGE. The presented ME system has a faster migration time, higher mean output voltage, and thinner full‐width at half‐maximum than previously reported dairy‐based biosensor systems. Most notably, the migration time of the new system is under 10 min, being the time associated with the milking of cattle. The system is also found to be able to detect the presence of milk fat. Discussion is included of potential future integration with existing high‐sensitivity methodologies to place the overall ME system's limit of detection below an established target. To the authors’ knowledge, this is the first reported account of a PMMA ME system capable of detecting CPFH in unfiltered milk.
- 26 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (5) , 745-757
Terahertz Components by Additive Manufacturing: Material and Fabrication Characterizations Realized Through Bragg Structures
This work explores Bragg structures and superstructures for the terahertz regime that are 3D printed with two filament materials, being high impact polystyrene (HIPS) and cyclic olefin copolymer (COC). We show underlying frequency responses that come about due to the material absorption and chosen 3D printing resolution. A terahertz time-domain spectroscopy analysis shows the favorable low absorption coefficient of COC filament material compared to that of HIPS filament material. Through a demonstration of terahertz Bragg superstructures for both HIPS and COC filament material, we show the contrast in performance and mitigation of undesired absorption for a terahertz photonic element made from COC filament material. The experimental results show agreement with a finite-difference time-domain simulation of the terahertz Bragg superstructures. Through a demonstration of terahertz Bragg structures for both HIPS and COC filament material, we show the effect of printing resolution (over 50 to 400 micron range) of the terahertz spectral response. Terahertz Bragg structures and superstructures made from COC filament material show great promise for rapid prototyping of terahertz photonic elements.
- 26 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (5) , 745-757
Terahertz Components by Additive Manufacturing: Material and Fabrication Characterizations Realized Through Bragg Structures
This work explores Bragg structures and superstructures for the terahertz regime that are 3D printed with two filament materials, being high impact polystyrene (HIPS) and cyclic olefin copolymer (COC). We show underlying frequency responses that come about due to the material absorption and chosen 3D printing resolution. A terahertz time-domain spectroscopy analysis shows the favorable low absorption coefficient of COC filament material compared to that of HIPS filament material. Through a demonstration of terahertz Bragg superstructures for both HIPS and COC filament material, we show the contrast in performance and mitigation of undesired absorption for a terahertz photonic element made from COC filament material. The experimental results show agreement with a finite-difference time-domain simulation of the terahertz Bragg superstructures. Through a demonstration of terahertz Bragg structures for both HIPS and COC filament material, we show the effect of printing resolution (over 50 to 400 micron range) of the terahertz spectral response. Terahertz Bragg structures and superstructures made from COC filament material show great promise for rapid prototyping of terahertz photonic elements.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (3) , 386-394
Spatial Polarization Modulation for Terahertz Single-Pixel Imaging
Terahertz (THz) technology has been developed to meet advancements in spatial light modulation of frequencies in the THz regime, where fast modulation techniques designed for optical wavelengths perform poorly. Applications of THz frequencies in nondestructive imaging and quality testing have been thoroughly explored—specifically, polarization-resolved measurements can be scanned to image fiber anisotropy and birefringence in wood products and 3-D printed materials and strains in plastics. There is a need to explore faster image acquisition techniques, such as single-pixel imaging via spatial light modulation, to realize fast polarization-resolved THz imagers. Such spatial light modulators are vital for patterning the THz imaging beam before interacting with the sample to reconstruct the response of the sample with a single detector via compressive sensing algorithms. In this work, a spatial polarization modulation scheme is employed using wire grid polarizer (WGP) mask patterns to acquire polarization-resolved images of polarizing samples at 0.1 THz. A laser ablation technique is used to fabricate 8 × 8 WGP masks with randomly vertical and horizontal wire grids to pattern the imaging beam and enable orthogonal polarization images. With various sampling amounts, 8 × 8 polarization images are successfully reconstructed for polarizing samples of low and high spatial frequencies.
- 11 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (3) , 386-394
Spatial Polarization Modulation for Terahertz Single-Pixel Imaging
Terahertz (THz) technology has been developed to meet advancements in spatial light modulation of frequencies in the THz regime, where fast modulation techniques designed for optical wavelengths perform poorly. Applications of THz frequencies in nondestructive imaging and quality testing have been thoroughly explored—specifically, polarization-resolved measurements can be scanned to image fiber anisotropy and birefringence in wood products and 3-D printed materials and strains in plastics. There is a need to explore faster image acquisition techniques, such as single-pixel imaging via spatial light modulation, to realize fast polarization-resolved THz imagers. Such spatial light modulators are vital for patterning the THz imaging beam before interacting with the sample to reconstruct the response of the sample with a single detector via compressive sensing algorithms. In this work, a spatial polarization modulation scheme is employed using wire grid polarizer (WGP) mask patterns to acquire polarization-resolved images of polarizing samples at 0.1 THz. A laser ablation technique is used to fabricate 8 × 8 WGP masks with randomly vertical and horizontal wire grids to pattern the imaging beam and enable orthogonal polarization images. With various sampling amounts, 8 × 8 polarization images are successfully reconstructed for polarizing samples of low and high spatial frequencies.
- 16 August 2023
- Published by Springer Nature in Microsystem Technologies
- Vol. 29 (9) , 1389-1398
An integrated and automated digital microfluidic device for dairy milk droplet actuation
- 16 August 2023
- Published by Springer Nature in Microsystem Technologies
- Vol. 29 (9) , 1389-1398
An integrated and automated digital microfluidic device for dairy milk droplet actuation
- Open Access
- 24 July 2023
- Published by Wiley in Engineering Reports
- Vol. 6 (3)
A digital microfluidic chip with programmable open system actuation and enhanced optical annealing with near‐infrared light
This work investigates a digital microfluidic chip and presents an advancement to microfluidic optical annealing methods through the application of whispering gallery mode (WGM) with near infrared excitation. Establishing a microfluidic chip with point‐of‐care capabilities, including actuation and annealing, has proven to be important. Unfortunately, poor heat absorption due to the long optical penetration depth of near infrared light creates scaling limitations for applications in optical‐based microfluidics. Through the application of WGM, the interaction length between the droplet and light is increased beyond the droplet diameter to improve heating and optical absorption. This is supported by finite‐difference time‐domain electromagnetic simulations and experimental results showing a greatly improved temperature change. Such a system is implemented in an open system digital microfluidic chip, to facilitate annealing via side illumination of droplets. The open system digital microfluidic chip is programmable for droplet actuation. The fundamental experiment of preprogrammed actuation of microdroplets is demonstrated in a 36 electrode grid. The results of annealing and actuation show potential for implementation in point‐of‐care microfluidic devices.
- 24 July 2023
- Published by Wiley in Engineering Reports
- Vol. 6 (3)
Open AccessA digital microfluidic chip with programmable open system actuation and enhanced optical annealing with near‐infrared light
This work investigates a digital microfluidic chip and presents an advancement to microfluidic optical annealing methods through the application of whispering gallery mode (WGM) with near infrared excitation. Establishing a microfluidic chip with point‐of‐care capabilities, including actuation and annealing, has proven to be important. Unfortunately, poor heat absorption due to the long optical penetration depth of near infrared light creates scaling limitations for applications in optical‐based microfluidics. Through the application of WGM, the interaction length between the droplet and light is increased beyond the droplet diameter to improve heating and optical absorption. This is supported by finite‐difference time‐domain electromagnetic simulations and experimental results showing a greatly improved temperature change. Such a system is implemented in an open system digital microfluidic chip, to facilitate annealing via side illumination of droplets. The open system digital microfluidic chip is programmable for droplet actuation. The fundamental experiment of preprogrammed actuation of microdroplets is demonstrated in a 36 electrode grid. The results of annealing and actuation show potential for implementation in point‐of‐care microfluidic devices.
- 2 June 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (17) , 4465-4473
THz Bragg structures fabricated with additive manufacturing
The advancement of THz science and technology is desirable to facilitate the application of THz technologies in many sectors. Specialized THz photonic elements for these applications require desirable absorption and refractive characteristics in the THz regime. THz photonic elements can be created with additive manufacturing, and specifically 3D printing, forgoing the need for complex fabrication procedures and methodologies. Such THz photonic elements include periodic Bragg structures, which are capable of filtering specific THz frequencies. The authors present a THz Bragg structure fabricated with 3D printing via fused filament fabrication. The THz Bragg structure is made from high-impact polystyrene filament material, which is characterized in this paper with THz time-domain spectroscopy. The geometry and theoretical operation of the THz Bragg structure is investigated with finite-difference time-domain electromagnetic simulations. The THz Bragg structure is evaluated using a THz experimental test bed. There is agreement between the theoretical and the experimental filtering placement within the frequency domain for the THz Bragg structure. The capability of tunable frequency filtering of the presented THz Bragg structure, fabricated with 3D printing, is established and facilitates future advancements in applications of THz science and technology.
- 2 June 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (17) , 4465-4473
THz Bragg structures fabricated with additive manufacturing
The advancement of THz science and technology is desirable to facilitate the application of THz technologies in many sectors. Specialized THz photonic elements for these applications require desirable absorption and refractive characteristics in the THz regime. THz photonic elements can be created with additive manufacturing, and specifically 3D printing, forgoing the need for complex fabrication procedures and methodologies. Such THz photonic elements include periodic Bragg structures, which are capable of filtering specific THz frequencies. The authors present a THz Bragg structure fabricated with 3D printing via fused filament fabrication. The THz Bragg structure is made from high-impact polystyrene filament material, which is characterized in this paper with THz time-domain spectroscopy. The geometry and theoretical operation of the THz Bragg structure is investigated with finite-difference time-domain electromagnetic simulations. The THz Bragg structure is evaluated using a THz experimental test bed. There is agreement between the theoretical and the experimental filtering placement within the frequency domain for the THz Bragg structure. The capability of tunable frequency filtering of the presented THz Bragg structure, fabricated with 3D printing, is established and facilitates future advancements in applications of THz science and technology.