CBC. Harrison Brodie

C. Harrison Brodie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


C. Harrison Brodie has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Terahertz Components by Additive Manufacturing: Material and Fabrication Characterizations Realized Through Bragg Structures

    by C. Harrison Brodie, Isaac Spotts, Christopher M. Collier

    This work explores Bragg structures and superstructures for the terahertz regime that are 3D printed with two filament materials, being high impact polystyrene (HIPS) and cyclic olefin copolymer (COC). We show underlying frequency responses that come about due to the material absorption and chosen 3D printing resolution. A terahertz time-domain spectroscopy analysis shows the favorable low absorption coefficient of COC filament material compared to that of HIPS filament material. Through a demonstration of terahertz Bragg superstructures for both HIPS and COC filament material, we show the contrast in performance and mitigation of undesired absorption for a terahertz photonic element made from COC filament material. The experimental results show agreement with a finite-difference time-domain simulation of the terahertz Bragg superstructures. Through a demonstration of terahertz Bragg structures for both HIPS and COC filament material, we show the effect of printing resolution (over 50 to 400 micron range) of the terahertz spectral response. Terahertz Bragg structures and superstructures made from COC filament material show great promise for rapid prototyping of terahertz photonic elements.


  • Open Access

    Integration of liquid crystal optical delay and mechanical stage optical delay for measurement of ultrafast autocorrelations and terahertz pulses

    by Isaac Spotts, C Harrison Brodie, Christopher M Collier

    To improve the temporal resolution in an optical delay system that uses a conventional mechanical delay stage, we integrate an in-line liquid crystal (LC) wave retarder. Previous implementations of LC optical delay methods are limited due to the small temporal window provided. Using a conventional mechanical delay stage system in series with the LC wave retarder, the temporal window is lengthened. Additionally, the limitation on temporal resolution resulting from the minimum optical path alteration (resolution of 400 nm) of the conventionally used mechanical delay stage is reduced via the in-line wave retarder (resolution of 50 nm). Interferometric autocorrelation measurements are conducted at multiple laser emission frequencies (349, 357, 375, 394, and 405 THz) using the in-line LC and conventional mechanical delay stage systems. The in-line LC system is compared to the conventional mechanical delay stage system to determine the improvements in temporal resolution relating to maximum resolvable frequency. This work demonstrates that the integration of the in-line LC system can extend the maximum resolvable frequency from 375 to 3000 THz. The in-line LC system is also applied for measurement of terahertz pulses.


  • Open Access

    A digital microfluidic chip with programmable open system actuation and enhanced optical annealing with near‐infrared light

    by Sydney Lepard, Isaac Spotts, C. Harrison Brodie, Camille A. Leclerc, Rahul Eswar, Huiyan Li, Christopher M. Collier

    This work investigates a digital microfluidic chip and presents an advancement to microfluidic optical annealing methods through the application of whispering gallery mode (WGM) with near infrared excitation. Establishing a microfluidic chip with point‐of‐care capabilities, including actuation and annealing, has proven to be important. Unfortunately, poor heat absorption due to the long optical penetration depth of near infrared light creates scaling limitations for applications in optical‐based microfluidics. Through the application of WGM, the interaction length between the droplet and light is increased beyond the droplet diameter to improve heating and optical absorption. This is supported by finite‐difference time‐domain electromagnetic simulations and experimental results showing a greatly improved temperature change. Such a system is implemented in an open system digital microfluidic chip, to facilitate annealing via side illumination of droplets. The open system digital microfluidic chip is programmable for droplet actuation. The fundamental experiment of preprogrammed actuation of microdroplets is demonstrated in a 36 electrode grid. The results of annealing and actuation show potential for implementation in point‐of‐care microfluidic devices.

  • THz Bragg structures fabricated with additive manufacturing

    by C. Harrison Brodie, Isaac Spotts, Christopher M. Collier

    The advancement of THz science and technology is desirable to facilitate the application of THz technologies in many sectors. Specialized THz photonic elements for these applications require desirable absorption and refractive characteristics in the THz regime. THz photonic elements can be created with additive manufacturing, and specifically 3D printing, forgoing the need for complex fabrication procedures and methodologies. Such THz photonic elements include periodic Bragg structures, which are capable of filtering specific THz frequencies. The authors present a THz Bragg structure fabricated with 3D printing via fused filament fabrication. The THz Bragg structure is made from high-impact polystyrene filament material, which is characterized in this paper with THz time-domain spectroscopy. The geometry and theoretical operation of the THz Bragg structure is investigated with finite-difference time-domain electromagnetic simulations. The THz Bragg structure is evaluated using a THz experimental test bed. There is agreement between the theoretical and the experimental filtering placement within the frequency domain for the THz Bragg structure. The capability of tunable frequency filtering of the presented THz Bragg structure, fabricated with 3D printing, is established and facilitates future advancements in applications of THz science and technology.


  • Improved Terahertz Time-Domain Spectroscopy via the Extended Kalman Filter

    by Isaac Spotts, C. Harrison Brodie, Daryoosh Saeedkia, S. Andrew Gadsden, Christopher M. Collier

    To implement terahertz time-domain spectroscopy (THz-TDS) systems that have short integration time and maintain performance, the extended Kalman filter (EKF) has been used. Performance of EKF with THz-TDS on vapor samples and solid samples is untested. Previous EKF methods were not adaptive for use on multiple THz-TDS systems. We provide an adaptive EKF method that can work on any THz setup, to improve maximum measurable absorption coefficient. Our adaptive EKF method responds to THz pulse properties. The adaptive EKF is exhaustively demonstrated for six different time-constant data sets spanning 1 ms to 300 ms for THz-TDS on vapor with electro-optic THz detection. The acquisition time saved is quantified and shown to significantly reduce acquisition time from 2.58 ms to 1 ms. This improvement of 2.58 times will have a significant effect to move spectral imaging from taking hours to taking minutes. Vapor absorption lines are maintained. We show the adaptive EKF maintain correct spectral information when compared to the high-resolution transmission molecular absorption (HITRAN) database. The adaptive EKF is also demonstrated for THz-TDS on vapor with photoconductive THz detection, thus demonstrating adaptability, and is applied for THz-TDS of a solid sample of polyethylene terephthalate glycol.


  • Lock-In Amplified Fluorescence Spectroscopy in a Digital Microfluidic Configuration for Antibiotic Detection of Ciprofloxacin in Milk

    by Rahul Eswar, C. Harrison Brodie, Christopher M. Collier

    Antibiotic detection in dairy is crucial, as introduction of antibiotics in food can lead to antibiotic resistance and cause allergic reactions in consumers. Dairy farmers risk monetary fines for shipping contaminated milk. Microfluidics is an appealing technology, as it is portable, can be implemented on-site, and is highly automated. This work presents a digital microfluidic dairy device for antibiotic detection. The digital microfluidic dairy device explores integration of a lock-in amplifier with droplet-based microfluidic techniques, being electrowetting actuation and droplet control. The lock-in amplifier setup is initially demonstrated for the fluorescent dye rhodamine B, to establish baseline operation. Ultimately, the lock-in amplifier setup is demonstrated for detection of ciprofloxacin in milk. The limit of detection is significantly lowered through the integration of the lock-in amplifier technology. Actuation of milk and water samples is shown, demonstrating full two dimensional control over the position of water and milk droplets, to enable a complete lab-on-a-chip system. The results show promise for modern dairy testing of antibiotic signatures. 2022-0120


  • Comprehensive study of 3D printing materials over the terahertz regime: absorption coefficient and refractive index characterizations

    by C. Harrison Brodie, Isaac Spotts, Hajer Reguigui, Camille A. Leclerc, Michael E. Mitchell, Jonathan F. Holzman, Christopher M. Collier

    Generation of terahertz (THz) radiation has become increasingly accessible over time. The research and development of THz applications is ongoing, often requiring the use of THz compatible optical components. At the same time, rapid prototyping three-dimensional (3D) printing systems are now commercially accessible and are capable of printing resolutions on the order of the THz wavelengths. Thus, 3D printing systems can be leveraged for use in creating novel THz optical components in varied experiments and applications. The filament material used in 3D printing systems dictates the absorptive and refractive properties of the 3D printed THz optical component. The commercial release of filament materials is continuous, year after year, inducing a need for literature to stay current with characterizing these filament materials over the THz gap. We use terahertz time-domain spectroscopy (THz-TDS) to characterize the absorptive and refractive properties of 3D printing materials over the THz gap. We present a consolidative and comprehensive aggregation of THz-TDS measurements of twenty-three 3D printing materials. A comparison of THz-TDS measurements for thick and thin samples provides verification of measurement accuracy. The measured THz bandwidth of these samples is extended by up to 1.2 THz. Furthermore, to the authors’ best knowledge, the proposed work puts forward the first THz-TDS measurements of polyvinyl butyral, polyetherimide, and low temperature polycaprolactone filament materials. This work primarily focuses on fused deposition modeling (FDM) 3D printed materials, rather than stereolithography (SLA) 3D printed materials.


  • Open Access

    Single-Point Detection Architecture via Liquid Crystal Modulation for Hyperspectral Imaging Systems

    by C. Harrison Brodie, Christopher M. Collier

    Hyperspectral imaging (HSI) architectures can acquire one-dimension of spatial information and one-dimension of spectral information on a two-dimensional image sensor for an image, such as in the traditional line-scan HSI architecture. However, development of HSI architectures for multiple spatial dimensions is challenging as there is not a third dimension on a two-dimensional image sensor on which to store spectral information. The presented work introduces a snapshot HSI architecture to alleviate this issue. The snapshot HSI architecture incorporates single-point detection via liquid crystal modulation and a single photodiode. Mixing of hyperspectral data is expressed as intermodulation frequency products within the Fourier-domain. Spatial information can be recorded through spatial frequencies and spectral information can be recorded through spectral frequencies. Such modulation is achieved through liquid crystal spatial and spectral arrays of an image beam. The spatial and spectral modulation frequencies form intermodulation frequency products that are recorded on the single photodiode and can be uncovered through Fourier-domain filtering.