AAAshraf A. Ali

Ashraf A. Ali

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ashraf A. Ali has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Central Composite Design and Response Surface Methodology for Optimizing the Diameter of Electrospun Polyamide-6,6 Nanofiber Mat

    by Saleh S. Abdelhady, Ashraf A. Ali, Said H. Zoalfakar, Rehab E. Elbadawi

    Electrospinning is a well-established technique for creating submicron polymer fibers to create distinctive functional nanostructures. Electrospinning parameters including solution concentration, tip-to-collector distance and applied voltage are adjusted to produce nonwovens with variable fiber diameter distributions. This research on the response surface methodology (RSM) is being used to model the diameter of a polyamide-6,6 (PA-6,6) nanofiber mat. The experiments were designed using central composite design (CCD) and RSM, which evaluated the interactions between the operating variables (polymer concentration, applied positive voltage, needle tip to collector distance and spinning angle) on the diameter of the PA-6,6 nanofiber. The average nanofiber diameter increased as the concentration of the PA-6,6 polymer solution increased. The model’s strong regression coefficient ([ ]) reveals that it did a desirable of predicting the diameter of PA-6,6 fibers. The experimental findings and predicted fiber diameters were in good agreement. The results demonstrate that the optimization of electrospinning process to produce the smallest nanofibers and narrowest diameter distribution ([ ]) combined effects of 10% polymer concentration, 21[ ]kV applied positive voltage, 18[ ]cm needle tip to collector distance and [ ] spinning angle are substantial interacting effects that have an impact on the surface response nanofibers. The results of the research and several mathematical models will offer useful guidelines for choosing parameter settings for electrospinning PA-6,6 to achieve the required fiber diameter. By saving time, effort and money more effectively, this research will expand the field of investigation for the quality of electrospun nanofibers.


  • Open Access

    Modeling electrospun PLGA nanofibers’ diameter using response surface methodology and artificial neural networks

    by Saleh S Abdelhady, Mm Atta, Aa Megahed, Ka Abu-Hasel, Mohammed Alquraish, Ashraf A Ali, Said H Zoalfakar

    The present work is an attempt to model the diameter of Poly Lactic-co-Glycolic Acid (PLGA) nanofibers by utilizing response surface methodology (RSM) and artificial neural networks (ANNs). Hence, determining the optimal electrospinning process conditions to produce a minimum fiber diameter. For modelling the average diameter of nanofibers, RSM approach based on four parameters (polymer concentration, high voltage and needle tip to collector distance and spinning angle) with five-level was compared to ANN technique. In the RSM approach, central composite design (CCD) was used to determine the individual and interaction impacts of the parameters on the average diameter of nanofibers. Several ANNs of single and double hidden layers with different number of cells for each were tried to obtain the best network structure. The experimental and predicted PLGA fiber diameters using an ANN showed a strong correlation, indicating that the network topology of 4-14-1 has good predictability for analyzing factors impacting PLGA fiber diameter. The average absolute relative error for predicting PLGA nanofibers’ diameter using ANN (2.24%) is slightly less than that obtained from RSM (2.59%). The high regression coefficient between the variables and the response (R2 = 0.9636) shows a good second-order polynomial regression model for evaluating experimental data. The R2 value was 0.945, indicating that the ANN model was good fitting with the experimental results. The optimum combinations (PLGA concentration of 26 wt.%, high voltage 22 kV, needle tip to collector distance 20 cm, and spinning angle 60o) were developed by RSM model for electrospinning PLGA nanofiber that can produce fine, consistent, and high-quality nanofibers.


  • Open Access

    Electrospun Nanofibrous Scaffolds: Review of Current Progress in the Properties and Manufacturing Process, and Possible Applications for COVID-19

    by Mohamed Kchaou, Mohammed Alquraish, Khaled Abuhasel, Ahmad Abdullah, Ashraf A. Ali

    Over the last twenty years, researchers have focused on the potential applications of electrospinning, especially its scalability and versatility. Specifically, electrospun nanofiber scaffolds are considered an emergent technology and a promising approach that can be applied to biosensing, drug delivery, soft and hard tissue repair and regeneration, and wound healing. Several parameters control the functional scaffolds, such as fiber geometrical characteristics and alignment, architecture, etc. As it is based on nanotechnology, the concept of this approach has shown a strong evolution in terms of the forms of the materials used (aerogels, microspheres, etc.), the incorporated microorganisms used to treat diseases (cells, proteins, nuclei acids, etc.), and the manufacturing process in relation to the control of adhesion, proliferation, and differentiation of the mimetic nanofibers. However, several difficulties are still considered as huge challenges for scientists to overcome in relation to scaffolds design and properties (hydrophilicity, biodegradability, and biocompatibility) but also in relation to transferring biological nanofibers products into practical industrial use by way of a highly efficient bio-solution. In this article, the authors review current progress in the materials and processes used by the electrospinning technique to develop novel fibrous scaffolds with suitable design and that more closely mimic structure. A specific interest will be given to the use of this approach as an emergent technology for the treatment of bacteria and viruses such as COVID-19.


  • Morphological, mechanical, and thermal characterization of electrospun three‐dimensional graphite nanoplatelets/polystyrene ultra‐fine fibril composite fabrics

    by A. S. Fayed, K. A. Abu‐Hasel, Sameh M. Mahdy, Ashraf A. Ali

    Ultra‐fine fibril composites were produced by electrospinning of a polymer solution containing polystyrene (PS)/dimethylformamide (DMF) with different concentrations of three‐dimensional graphite nanoplatelets (3D‐GNPs). Berry's number of PS/DMF polymer solution was extensively studied to produce minimum electrospun PS fiber diameters. Three‐dimensional GNPs of different weight percentages were dispersed in the optimized PS/DMF to produce ultrafine fibril composite fabric. The electrospun average diameters decreased from 1.5 μm for PS fibers to 890 nm for 3D‐GNPs/PS fibril composites, respectively, at 12 and 9.8 Berry's number. High‐resolution transmission electron microscopy samples' micrographs confirm a homogenous dispersion and alignment of 3D‐GNPs in PS fibril composites. Thermal and mechanical characteristics of fabrics were determined using thermogravimetric analysis, thermomechanical Analysis, and dynamic mechanical analysis (DMA). It was found that there was an increase in percentage elongation, tensile strength, thermal stability, and glass‐transition temperature for 3D‐GNPs PS fibril composite fabrics compared to PS fabrics. Diminishing the value of loss tangent, measured by DMA, was used as an approach to predict the maximum amount of 3D‐GNPs weight percent dispersion in electrospun PS/dimethylformamide solution. One of the most important potential applications of the electrospun 3D‐GNPs/PS fibril composite fabrics is in the interiors of vehicles and aerospace industries as it characterizes by its good thermal and mechanical properties as well as its low density.


  • Treated basalt fibers reinforced nylon 6,6/epoxy hybrid nanofibril composites

    by Saleh S Abdelhady, Said H Zoalfakar, Ma Agwa, Ashraf A Ali

    Basalt fiber was first treated in a mixture of formic acid (FA) and dichloromethane (DCM) to reduce its diameter down to one micrometer. Electrospinning process was utilized to produce treated basalt fiber (TBF)-reinforced nylon 6,6/epoxy (NY/EP) hybrid nanofibril composites. NY/EP polymers have been dissolved in 80:20 mixture of FA/DCM solvent to form a homogenous solution. TBFs with different weight ratios of 5, 10, 15, 20, and 25 wt% were added to NY/EP (ratio of 5:1). The morphology of the hybrid nanocomposites was investigated by scanning electron microscopy and their compositions were analyzed using energy-dispersive X-ray spectroscopy. The thermal properties were studied by differential scanning calorimetry and thermogravimetric analysis. The mechanical properties of the hybrid nanocomposites, including tensile strength and modulus, are improved with respect to NY/EP hybrid nanofibers. An increase of 76% and 87% in tensile strength and Young’s modulus was acquired, respectively, at 15 wt% of TBF. Also, the addition of TBF increased the thermal stability of nanofibril composites.


  • Electrospun EGNPs reinforced precursor carbon nanofibril composites by using RSM

    by Said H. Zoalfakar, Mostafa A. Mohamed, Mohamed A. El‐Hamid, Ashraf A. Ali

    Response surface methodology (RSM),based on five‐level, four variable Box‐Benkhen technique was investigated for modeling the average fiber diameter of electrospun polyacrylonitrile (PAN) nanofibers. The four important electrospinning parameters were studied including applied voltage (kV), Berry's number, deposition distance from nozzle to collector (cm), and spinning angle (Ѳ in degree). The measured fiber diameters were in a good agreement with the predicted results by using RSM technique. High‐regression coefficient between the variables and the response ( R 2 = 87.74%) indicates excellent evaluation of experimental data by second‐order polynomial regression model. The optimum PAN average fiber diameters of 208 and 37‐nm standard deviation were collected at 19 kV, Berry's number = 10, 25 ° spinning angle, and 16‐cm deposition distance. The PAN/ N,N ‐dimethylformamide (DMF) polymer solution with the optimum weight concentration (10 wt.%) was selected to study the effect of dispersing exfoliated graphite nanoplatelets (EGNPs) in PAN/DMF solution on the electrospun EGNP/PAN fibril composite diameter. Five different EGNPs weight concentrations (2, 4, 6, 8, and 10 wt.%) were dispersed in the optimized PAN/DMF polymer solution. Morphology of EGNPs/PAN fibril composites and its distribution were investigated by scanning electron microscopy (SEM) to show the minimum fiber diameter for the above‐mentioned 5 wt. % of EGNPs. A minimum fibril composite diameter of 182 nm was obtained at 10 wt.% of EGNPs. Morphological characteristics of electrospun fibers and their distribution were tested by Raman spectroscopy, SEM, differential light scattering, and high‐resolution transmission electron microscopy.