Hesham Okeil
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hesham Okeil has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Gerhard Wachutka
Department of Electrical Engineering, TUM School of Computation, Information and Technology, Technical University of Munich, Munich, Germany
9 shared publications- Gabriele Schrag
Technical University of Munich
2 shared publications - Gerhard Wachutka
Institute for Physics of Electrotechnology, Munich University of Technology, Germany
2 shared publications - Tobias Erlbacher
Nexperia
2 shared publications Gabriele Schrag
Chair for Physics of Electrotechnology, Technical University of Munich, 80333 Munich, Germany
1 shared publication
Latest Publications
- Open Access
- 23 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (13) , 23966-23972
Very High-Temperature Operation and Noise-Limited Performance of 4H-SiC Lateral Magnetotransistors
4H-SiC is a key material for enabling integrated electronics and sensors that operate in very high-temperature environments. In this paper, we demonstrate the operation of 4H-SiC-based in-plane magnetic field sensitive lateral magnetotransistors across a broad range of temperatures, spanning room temperature up to 500 °C. We evaluate the magnetic field sensitivity, linearity, and electrical stability of the sensors. By conducting temperature-dependent collector current noise measurements, we determine the magnetic field detectivity up to 500 °C. A noise-limited detectivity of 3.7 μT/√Hz is achieved at 500 °C, reflecting the potential of lateral magnetotransistors for very high-temperature magnetic field sensing applications. Furthermore, we report on an anomalous slow turn-on transient behavior observed at high temperatures and discuss the possible role of extended defects.
- 23 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (13) , 23966-23972
Open AccessVery High-Temperature Operation and Noise-Limited Performance of 4H-SiC Lateral Magnetotransistors
4H-SiC is a key material for enabling integrated electronics and sensors that operate in very high-temperature environments. In this paper, we demonstrate the operation of 4H-SiC-based in-plane magnetic field sensitive lateral magnetotransistors across a broad range of temperatures, spanning room temperature up to 500 °C. We evaluate the magnetic field sensitivity, linearity, and electrical stability of the sensors. By conducting temperature-dependent collector current noise measurements, we determine the magnetic field detectivity up to 500 °C. A noise-limited detectivity of 3.7 μT/√Hz is achieved at 500 °C, reflecting the potential of lateral magnetotransistors for very high-temperature magnetic field sensing applications. Furthermore, we report on an anomalous slow turn-on transient behavior observed at high temperatures and discuss the possible role of extended defects.
- Open Access
- 9 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (11) , 2173-2176
4H-SiC Lateral Magnetotransistor With Sub-Microtesla In-Plane Magnetic Field Detectivity
In this letter, we report on the first 4H-SiC based lateral magnetotransistor. The sensor is fabricated in a 4H-SiC wafer scale Bipolar-CMOS-DMOS (BCD) technology and exhibits high sensitivity to in-plane magnetic fields, reaching$960 \; \mu $ A/T. We study its electrical and magnetic characteristics and measure the achievable magnetic field detectivity. A minimum noise-limited detectivity of 273 nT/$\sqrt {\text {Hz}}$ is achieved. Using TCAD simulations, we study the underlying transduction mechanism and identify electron hole plasma modulation as the main operating principle.- 9 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (11) , 2173-2176
Open Access4H-SiC Lateral Magnetotransistor With Sub-Microtesla In-Plane Magnetic Field Detectivity
In this letter, we report on the first 4H-SiC based lateral magnetotransistor. The sensor is fabricated in a 4H-SiC wafer scale Bipolar-CMOS-DMOS (BCD) technology and exhibits high sensitivity to in-plane magnetic fields, reaching$960 \; \mu $ A/T. We study its electrical and magnetic characteristics and measure the achievable magnetic field detectivity. A minimum noise-limited detectivity of 273 nT/$\sqrt {\text {Hz}}$ is achieved. Using TCAD simulations, we study the underlying transduction mechanism and identify electron hole plasma modulation as the main operating principle. - Open Access
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (19) , 29884-29889
500 °C Microtesla Sensitive Magnetic Field Sensing Using a 4H-SiC PIN Diode
Wide band gap semiconductors possess a large potential for the development of sensors operating in harsh environments. In this paper we present an in-depth investigation of the magnetic field sensing capabilities of a 4H-SiC based lateral pin diode up to a temperature of 500 °C. We characterize the diode in terms of magnetic field sensitivity, linearity, stability, and current noise. By combining the sensitivity and noise measurements we finally evaluate the magnetic field detectivity. The results reflect the potential of the diode for magnetic field sensing in harsh environments as well as for current sensing applications in SiC power modules.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (19) , 29884-29889
Open Access500 °C Microtesla Sensitive Magnetic Field Sensing Using a 4H-SiC PIN Diode
Wide band gap semiconductors possess a large potential for the development of sensors operating in harsh environments. In this paper we present an in-depth investigation of the magnetic field sensing capabilities of a 4H-SiC based lateral pin diode up to a temperature of 500 °C. We characterize the diode in terms of magnetic field sensitivity, linearity, stability, and current noise. By combining the sensitivity and noise measurements we finally evaluate the magnetic field detectivity. The results reflect the potential of the diode for magnetic field sensing in harsh environments as well as for current sensing applications in SiC power modules.
- Open Access
- 7 August 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (1)
Very High Temperature Hall Sensors in a Wafer‐Scale 4H‐SiC Technology
4H‐SiC is a key enabler for realizing integrated electronics operating in harsh environments, which exhibit very high temperatures. Through advances in 4H‐SiC process technology, different sensor and circuit types have been demonstrated to operate stable at temperatures as high as 800 °C, paving the way toward harsh‐environment immune smart sensors. In this work, for the first time the operation of ion‐implanted 4H‐SiC Hall sensors realized in a wafer scale Bipolar‐CMOS‐DMOS technology is demonstrated at a wide operation temperature range spanning room temperature up to 500 °C in addition to short‐term operation up to 600 °C. The temperature‐dependent sensor characteristics of 15–22 samples are evaluated in terms of sensitivity and noise. The small inter‐device variations reflect the stability of the used process for very high temperature Hall sensors. The noise‐limited detectivity is further evaluated, revealing a best value of 950 nT/ and a mean detectivity of 1 µT/ at 500 °C. This is the best value reported up to date for very high temperature Hall sensors, besides being the first demonstration of ion‐implanted wide‐bandgap Hall sensors. Overall, the results reflect the potential of the demonstrated Hall sensors for the next generation of integrated magnetic field sensors in harsh environments.
- 7 August 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (1)
Open AccessVery High Temperature Hall Sensors in a Wafer‐Scale 4H‐SiC Technology
4H‐SiC is a key enabler for realizing integrated electronics operating in harsh environments, which exhibit very high temperatures. Through advances in 4H‐SiC process technology, different sensor and circuit types have been demonstrated to operate stable at temperatures as high as 800 °C, paving the way toward harsh‐environment immune smart sensors. In this work, for the first time the operation of ion‐implanted 4H‐SiC Hall sensors realized in a wafer scale Bipolar‐CMOS‐DMOS technology is demonstrated at a wide operation temperature range spanning room temperature up to 500 °C in addition to short‐term operation up to 600 °C. The temperature‐dependent sensor characteristics of 15–22 samples are evaluated in terms of sensitivity and noise. The small inter‐device variations reflect the stability of the used process for very high temperature Hall sensors. The noise‐limited detectivity is further evaluated, revealing a best value of 950 nT/ and a mean detectivity of 1 µT/ at 500 °C. This is the best value reported up to date for very high temperature Hall sensors, besides being the first demonstration of ion‐implanted wide‐bandgap Hall sensors. Overall, the results reflect the potential of the demonstrated Hall sensors for the next generation of integrated magnetic field sensors in harsh environments.
- Open Access
- 13 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (20)
Publisher's Note: “4H–SiC vertical magnetotransistor with microtesla detectivity up to 500 °C” [Appl. Phys. Lett. 124, 192101 (2024)]
This article was originally published online on 6 May 2024 with errors on pages 2, 3, and 4. This article was originally published online on 6 May 2024 with errors on pages 2, 3, and 4.
- 13 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (20)
Open AccessPublisher's Note: “4H–SiC vertical magnetotransistor with microtesla detectivity up to 500 °C” [Appl. Phys. Lett. 124, 192101 (2024)]
This article was originally published online on 6 May 2024 with errors on pages 2, 3, and 4. This article was originally published online on 6 May 2024 with errors on pages 2, 3, and 4.
- Open Access
- 6 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (19)
4H–SiC vertical magnetotransistor with microtesla detectivity up to 500 °C
In this Letter, we demonstrate the operation of an in-plane magnetic field sensitive 4H–SiC vertical magnetotransistor over a wide range of temperatures, ranging from room temperature up to 500 °C. The sensor is realized using the ion-implanted wells of a wafer-scale 4H–SiC Bipolar-CMOS-DMOS technology. We measure and analyze the sensor's DC characteristics, magnetic sensitivity, linearity, and noise performance and determine the achievable magnetic detectivity, which lies in the low μT/Hz regime up to 500 °C. Furthermore, we elaborate on the origin of the observed magnetic sensitivity using TCAD simulations.
- 6 May 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (19)
Open Access4H–SiC vertical magnetotransistor with microtesla detectivity up to 500 °C
In this Letter, we demonstrate the operation of an in-plane magnetic field sensitive 4H–SiC vertical magnetotransistor over a wide range of temperatures, ranging from room temperature up to 500 °C. The sensor is realized using the ion-implanted wells of a wafer-scale 4H–SiC Bipolar-CMOS-DMOS technology. We measure and analyze the sensor's DC characteristics, magnetic sensitivity, linearity, and noise performance and determine the achievable magnetic detectivity, which lies in the low μT/Hz regime up to 500 °C. Furthermore, we elaborate on the origin of the observed magnetic sensitivity using TCAD simulations.
- Open Access
- 27 March 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (5) , 2300531
Very High In‐Plane Magnetic Field Sensitivity in Ion‐Implanted 4H‐SiC PIN Diodes
In this study ion‐implanted lateral 4H‐SiC pin diodes are reported, which show an unexpectedly high room temperature in‐plane magnetic field sensitivity approaching 100 % at 0.5 Tesla. Using dedicated TCAD simulations the underlying transduction mechanism is studied, and the effect of implantation‐induced carrier traps on the observed high sensitivity is unraveled. The study shows how such traps can greatly control the injection conditions at the highly doped implant regions providing a plausible explanation for an observed portion in the IV‐characteristics of the pin diodes exhibiting the aforementioned high magnetic field sensitivity.
- 27 March 2024
- Published by Wiley in Advanced Electronic Materials
- Vol. 10 (5) , 2300531
Open AccessVery High In‐Plane Magnetic Field Sensitivity in Ion‐Implanted 4H‐SiC PIN Diodes
In this study ion‐implanted lateral 4H‐SiC pin diodes are reported, which show an unexpectedly high room temperature in‐plane magnetic field sensitivity approaching 100 % at 0.5 Tesla. Using dedicated TCAD simulations the underlying transduction mechanism is studied, and the effect of implantation‐induced carrier traps on the observed high sensitivity is unraveled. The study shows how such traps can greatly control the injection conditions at the highly doped implant regions providing a plausible explanation for an observed portion in the IV‐characteristics of the pin diodes exhibiting the aforementioned high magnetic field sensitivity.
- 14 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-8
High-Throughput Apparatus for Semiconductor Device Characterization in a Magnetic Field at Extreme High Temperatures
We report on the development of a 600 °C withstanding low-noise apparatus, which enables high throughput magnetic field dependent characterization of semiconductor devices bonded to a ceramic substrate at very high temperatures. A novel and simple method for electrically contacting metal pads on the ceramic substrate is developed, which allows contacting many metal pads simultaneously on limited space. The apparatus can be used for a variety of high temperature experiments such as studying galvanomagnetic transport effects in devices and the characterization of SiC or GaN magnetic field sensors at very high temperatures. Furthermore, it can be used for performing very high temperature die attach processes. The apparatus has been successfully used to resolve magnetic field dependent current changes in a SiC pn diode ranging into the ppm scale at 500 °C.
- 14 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-8
High-Throughput Apparatus for Semiconductor Device Characterization in a Magnetic Field at Extreme High Temperatures
We report on the development of a 600 °C withstanding low-noise apparatus, which enables high throughput magnetic field dependent characterization of semiconductor devices bonded to a ceramic substrate at very high temperatures. A novel and simple method for electrically contacting metal pads on the ceramic substrate is developed, which allows contacting many metal pads simultaneously on limited space. The apparatus can be used for a variety of high temperature experiments such as studying galvanomagnetic transport effects in devices and the characterization of SiC or GaN magnetic field sensors at very high temperatures. Furthermore, it can be used for performing very high temperature die attach processes. The apparatus has been successfully used to resolve magnetic field dependent current changes in a SiC pn diode ranging into the ppm scale at 500 °C.
- 23 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (12) , 5653-5661
Design and Simulation of Novel Low-Voltage CMOS Vertical Hall Devices With Capacitively Coupled Measuring Contacts
In this article, we introduce the novel concept of capacitively coupled measuring contacts (CCMCs) for microscaled vertical Hall sensors. Using dedicated numerical simulations, we show how this concept results in shaping and consequent focusing of the Hall potential into the measuring contacts and, in addition, strongly reduces the parasitic short-circuit current flowing into the measuring contacts. We use these effects purposefully for the design of novel low-voltage CMOS vertical Hall sensors with high magnetic sensitivity. The shallow well along with the CCMCs confines the sensor response to a small active region, which shows potential for a wide range of applications.
- 23 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (12) , 5653-5661
Design and Simulation of Novel Low-Voltage CMOS Vertical Hall Devices With Capacitively Coupled Measuring Contacts
In this article, we introduce the novel concept of capacitively coupled measuring contacts (CCMCs) for microscaled vertical Hall sensors. Using dedicated numerical simulations, we show how this concept results in shaping and consequent focusing of the Hall potential into the measuring contacts and, in addition, strongly reduces the parasitic short-circuit current flowing into the measuring contacts. We use these effects purposefully for the design of novel low-voltage CMOS vertical Hall sensors with high magnetic sensitivity. The shallow well along with the CCMCs confines the sensor response to a small active region, which shows potential for a wide range of applications.
- 6 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 10 (1949307X) , 1-5
Design and Simulation of a Novel Vertical Hall Sensor With High Negative Differential Sensitivity
We report on the design and simulation of a novel vertical Hall sensor, which exhibits highly nonlinear characteristics between Hall voltage and bias voltage, featuring a region of large negative differential sensitivity. Based on these features, novel techniques for exciting the Hall plate and for signal extraction are suggested, allowing for further enhancement of the residual offset-limited dc resolution of in-plane magnetic field-sensitive Hall sensors, in particular, and integrated three-dimensional Hall sensors, in general.
- 6 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 10 (1949307X) , 1-5
Design and Simulation of a Novel Vertical Hall Sensor With High Negative Differential Sensitivity
We report on the design and simulation of a novel vertical Hall sensor, which exhibits highly nonlinear characteristics between Hall voltage and bias voltage, featuring a region of large negative differential sensitivity. Based on these features, novel techniques for exciting the Hall plate and for signal extraction are suggested, allowing for further enhancement of the residual offset-limited dc resolution of in-plane magnetic field-sensitive Hall sensors, in particular, and integrated three-dimensional Hall sensors, in general.