HBHongyeol Bae

Hongyeol Bae

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hongyeol Bae has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Brittle Fracture Avoidance Technology in Large Structures with Thick Steel Plates

    by Gyubaek An, Jeongung Park, Hongyeol Bae

    The 460-MPa-class steel was developed by thermomechanical control process for shipbuilding, and the maximum plate thickness was 100 mm, which has the fine grain size as 5–20 µm. The surfaces were studied in terms of micro and nano structures, surface roughness, and surface energy to evaluate the effect of fracture toughness in large steel structure. The thick steel plate has possibility to occur unstable fracture because the fracture toughness will be decrease with increase of thickness. The increase in the temperature in thermomechanical control process accelerated the surface energy and created both micro and nano structures on the surfaces more effectively. It was effective to avoid brittle fracture in the base metal when the brittle crack was deviated into base metal. The developed 460-MPa-class steel plate improves the brittle fracture safety despite being a thick steel plate through the fine grain size. They had to be designed in such a manner as to avoid crack initiation, especially in welded joints. In this study, brittle crack arrest designs were developed for large weld construction using arrest design concept and micro and nano structures in high strength steel plate.


  • Development of Crack Arrest Temperature Test Method by Using a Local Temperature Gradient

    by Gyubaek An, Hong-Yeol Bae, Jeong-Ung Park

    This study evaluated the brittle Crack Arrest Temperature (CAT) through an isothermal crack arrest test. Generally, the embrittled zone is required in a CAT test. According to conventional studies, the test method consists of arresting a double tension–type brittle crack with an Electron Beam melt-run, which acts as a crack initiator and crack runway. However, conventional CAT test methods have disadvantages in that they need additional processes to create an embrittled zone with Electron Beam Welding (EBW). A Local Temperature Gradient (LTG) system is developed to overcome the limitations of the conventional EBW embrittlement CAT test method. LTG systems do not require additional EBW to develop a brittle zone to initiate a brittle crack. In a LTG system, the LTG method is proposed instead of EBW to create the embrittled zone. The LTG system is free of flaws. In EBW, it is impossible to perform accurate CAT tests because the presence of defects affects the brittle crack arrest. In this study, a new CAT test method is introduced to evaluate brittle CATs more easily. Furthermore, both test methods were compared for the same specimens to verify the validity of the test method.


  • Open Access

    Brittle Crack Propagation Path Due to the Effect of Welding Residual Stresses

    by Gyubaek An, Hongyeol Bae, Jeongung Park, Wan Chuck Woo