Hongrui Chen
Research Subjects
Hongrui Chen has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Ziyang Zhang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
7 shared publications - Xiaoran Zhang
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing 102616, China
6 shared publications - Chaohong Tan
Beijing Engineering Research Center of Sustainable Urban Sewage System Construction and Risk Control, Beijing University of Civil Engineering and Architecture, Beijing 100044, China
4 shared publications - Fangyuan Liu
Beijing SDL Technology Co., Ltd., Beijing 102206, China
2 shared publications - Haiyan Li
Beijing University of Civil Engineering and Architecture
2 shared publications - Yongwei Gong
Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture, Beijing, China
2 shared publications
Latest Publications
- Open Access
- 2 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5599
Long-Term Assessment of Heavy Metal Removal Efficiency and Ecological Risk of Permeable Brick Pavement Systems with Modified Cushion Fillers
As a widely used sponge facility, the permeable pavement system (PPS) frequently exhibited a decline in pollutant removal after long-term operation. However, the long-term impacts of different cushion fillers on pollutant removal and ecological risk remain unclear. This study modified a conventional sand-based PPS (S1) by replacing the cushion layer with five materials: construction waste bricks (S2), coal gangue (S3), activated carbon (S4), carbon nanotubes (S5), and graphene (S6). A 5-year laboratory experiment evaluated the removal efficiency, fraction distribution, and ecological risk of heavy metals (HMs: Mn, Pb, Zn, Cu, Cd, Ni) from rainfall. The key findings demonstrated significant variations among fillers. S2 showed the poorest performance with a removal efficiency of 83.26% ± 13.02 across all HMs, whereas carbonaceous-modified systems (S4–S6) exhibited high removal efficiencies, exceeding 97.00% ± 1.89. Residual and Fe/Mn oxide states were predominant among the HMs, exceeding 43.69%, indicating enhanced metal immobilization. The ecological risks of carbon nanotubes and graphene were the highest, with risk indices of 1123.02 and 1129.63, respectively. These findings demonstrated that carbonaceous fillers achieved superior HM sequestration, leading to an overall reduction in ecological risk in the effluent of PPS after long-term operation. Overall, this study provided new perspectives on elucidating long-term removal efficiency and the ecological risk mitigation of PPS, and supported future application of carbonaceous fillers in sustainable PPS design and construction.
- 2 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (11) , 5599
Open AccessLong-Term Assessment of Heavy Metal Removal Efficiency and Ecological Risk of Permeable Brick Pavement Systems with Modified Cushion Fillers
As a widely used sponge facility, the permeable pavement system (PPS) frequently exhibited a decline in pollutant removal after long-term operation. However, the long-term impacts of different cushion fillers on pollutant removal and ecological risk remain unclear. This study modified a conventional sand-based PPS (S1) by replacing the cushion layer with five materials: construction waste bricks (S2), coal gangue (S3), activated carbon (S4), carbon nanotubes (S5), and graphene (S6). A 5-year laboratory experiment evaluated the removal efficiency, fraction distribution, and ecological risk of heavy metals (HMs: Mn, Pb, Zn, Cu, Cd, Ni) from rainfall. The key findings demonstrated significant variations among fillers. S2 showed the poorest performance with a removal efficiency of 83.26% ± 13.02 across all HMs, whereas carbonaceous-modified systems (S4–S6) exhibited high removal efficiencies, exceeding 97.00% ± 1.89. Residual and Fe/Mn oxide states were predominant among the HMs, exceeding 43.69%, indicating enhanced metal immobilization. The ecological risks of carbon nanotubes and graphene were the highest, with risk indices of 1123.02 and 1129.63, respectively. These findings demonstrated that carbonaceous fillers achieved superior HM sequestration, leading to an overall reduction in ecological risk in the effluent of PPS after long-term operation. Overall, this study provided new perspectives on elucidating long-term removal efficiency and the ecological risk mitigation of PPS, and supported future application of carbonaceous fillers in sustainable PPS design and construction.
- Open Access
- 8 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (8) , 3322
β-Cyclodextrin/Graphene Oxide Multilayer Composite Membrane: A Novel Sustainable Strategy for High-Efficiency Removal of Pharmaceuticals and Personal Care Products
The efficient removal of pharmaceuticals and personal care products (PPCPs) from aqueous solutions using conventional adsorbents is hindered by low adsorption capacity, insufficient selectivity, poor regeneration performance, and limited stability. In this study, a multilayer β-CD/GO membrane was successfully prepared via layer-by-layer coating with β-cyclodextrin (β-CD) and graphene oxide (GO). The multilayer β-CD/GO membrane combines the host–guest complexation ability of β-CD with the abundant oxygen-containing functional groups of GO to enhance the targeted removal of PPCPs (CTD, SMZ, and DCF) from aqueous solutions. The prepared multilayer β-CD/GO membrane adsorbent overcomes the separation difficulties and poor regeneration performance of powdered adsorbents, and the multilayer structure can significantly enhance structural stability and increase the number of adsorption sites. Batch adsorption experiments showed that the optimal adsorption performance of the multilayer β-CD/GO membrane for PPCPs occurred at pH 4 and in the absence of coexisting ions. With increasing pH values in the range of 4–9, the adsorption capacities of CTD, SMZ, and DCF slightly decreased to 14.37, 13.69, and 13.01 mg/g, respectively, and the adsorption capacities decreased slowly to 4.88, 3.51, and 3.26 mg/g as the coexisting ion concentrations increased from 0 to 0.20 mol/L. The adsorption mechanism of the multilayer β-CD/GO membrane for PPCPs was systematically investigated through adsorption kinetics, isotherms, and thermodynamics. The adsorption processes of CTD, SMZ, and DCF by the multilayer β-CD/GO membrane were well described by both pseudo-first-order and pseudo-second-order kinetic models (R2 > 0.984), suggesting a hybrid adsorption mechanism involving both physisorption and chemisorption. The isotherm results indicated that the adsorption of CTD by the multilayer β-CD/GO membrane followed the Langmuir model (R2 = 0.923), whereas the adsorption of SMZ and DCF was better described by the Freundlich model (R2 = 0.984–0.988). The multilayer β-CD/GO membrane exhibited high adsorption capacities for CTD, SMZ, and DCF with maximum capacities of 35.56, 43.29, and 39.49 mg/g, respectively. Thermodynamic analyses indicated that the adsorption of PPCPs was exothermic ( = −86.16 to −218.49 J/mol/K) and non-spontaneous ( = 9.84–11.56, 9.50–12.54, and 10.09–14.46 kJ/mol). The multilayer β-CD/GO membrane maintained a removal efficiency of over 58.45–71.73% for CTD, SMZ, and DCF after five consecutive regeneration cycles, demonstrating high reusability for practical applications. The adsorption mechanisms of the multilayer β-CD/GO membrane include electrostatic interactions, hydrogen bonding, hydrophobic interactions, and π-π EDA interactions. This study offers a promising and environmentally friendly adsorbent for the efficient removal of PPCPs from aqueous solutions.- 8 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (8) , 3322
Open Accessβ-Cyclodextrin/Graphene Oxide Multilayer Composite Membrane: A Novel Sustainable Strategy for High-Efficiency Removal of Pharmaceuticals and Personal Care Products
The efficient removal of pharmaceuticals and personal care products (PPCPs) from aqueous solutions using conventional adsorbents is hindered by low adsorption capacity, insufficient selectivity, poor regeneration performance, and limited stability. In this study, a multilayer β-CD/GO membrane was successfully prepared via layer-by-layer coating with β-cyclodextrin (β-CD) and graphene oxide (GO). The multilayer β-CD/GO membrane combines the host–guest complexation ability of β-CD with the abundant oxygen-containing functional groups of GO to enhance the targeted removal of PPCPs (CTD, SMZ, and DCF) from aqueous solutions. The prepared multilayer β-CD/GO membrane adsorbent overcomes the separation difficulties and poor regeneration performance of powdered adsorbents, and the multilayer structure can significantly enhance structural stability and increase the number of adsorption sites. Batch adsorption experiments showed that the optimal adsorption performance of the multilayer β-CD/GO membrane for PPCPs occurred at pH 4 and in the absence of coexisting ions. With increasing pH values in the range of 4–9, the adsorption capacities of CTD, SMZ, and DCF slightly decreased to 14.37, 13.69, and 13.01 mg/g, respectively, and the adsorption capacities decreased slowly to 4.88, 3.51, and 3.26 mg/g as the coexisting ion concentrations increased from 0 to 0.20 mol/L. The adsorption mechanism of the multilayer β-CD/GO membrane for PPCPs was systematically investigated through adsorption kinetics, isotherms, and thermodynamics. The adsorption processes of CTD, SMZ, and DCF by the multilayer β-CD/GO membrane were well described by both pseudo-first-order and pseudo-second-order kinetic models (R2 > 0.984), suggesting a hybrid adsorption mechanism involving both physisorption and chemisorption. The isotherm results indicated that the adsorption of CTD by the multilayer β-CD/GO membrane followed the Langmuir model (R2 = 0.923), whereas the adsorption of SMZ and DCF was better described by the Freundlich model (R2 = 0.984–0.988). The multilayer β-CD/GO membrane exhibited high adsorption capacities for CTD, SMZ, and DCF with maximum capacities of 35.56, 43.29, and 39.49 mg/g, respectively. Thermodynamic analyses indicated that the adsorption of PPCPs was exothermic ( = −86.16 to −218.49 J/mol/K) and non-spontaneous ( = 9.84–11.56, 9.50–12.54, and 10.09–14.46 kJ/mol). The multilayer β-CD/GO membrane maintained a removal efficiency of over 58.45–71.73% for CTD, SMZ, and DCF after five consecutive regeneration cycles, demonstrating high reusability for practical applications. The adsorption mechanisms of the multilayer β-CD/GO membrane include electrostatic interactions, hydrogen bonding, hydrophobic interactions, and π-π EDA interactions. This study offers a promising and environmentally friendly adsorbent for the efficient removal of PPCPs from aqueous solutions. - Open Access
Removal Efficiency and Mechanism of Typical PPCPs onto Novel Cyclodextrin–Graphene Oxide Composite Adsorbent in Aqueous Solutions
A novel β-cyclodextrin–graphene oxide (β-CD/GO) composite adsorbent was synthesized via a hydrothermal method. Removal efficiency and mechanisms of typical pharmaceutical and personal care products (PPCPs) by the β-CD/GO composite were investigated in aqueous solutions. The results demonstrated that the β-CD/GO composite was successfully formed through cross-linking between β-CD and GO nanosheets, exhibiting enriched hydroxyl groups, a porous layered structure, and good thermal stability. The adsorption of cimetidine (CTD), sulfamethazine (SMZ), and diclofenac (DCF) onto the β-CD/GO composite was well described by pseudo-first-order and pseudo-second-order kinetic models, and Langmuir isotherm. The maximum adsorption capacities of CTD, SMZ, and DCF onto the β-CD/GO composite were 58.86, 35.62, and 29.11 mg g−1 at 298 K, respectively. The adsorption process was rapid and reached equilibrium after 6 h. The adsorption followed a monolayer mechanism and was an exothermic process. The adsorption capacity decreased with increasing pH values and ion concentrations. The β-CD/GO composite exhibited maximum adsorption capacities of 17.69, 16.96, and 16.23 mg g−1 for CTD, SMZ, and DCF, respectively, under a pH of 4 with a dosage of 1.0 g/L at 298 K for 6 h. Due to the combined impacts of electrostatic interaction, hydrogen bonding, and host–guest interaction, the adsorption of PPCPs onto β-CD/GO composite was fast and efficient. β-CD/GO composite exhibited superior adsorption efficacy and structural stability, which highlighted its promising application in the elimination of micropollutants from aqueous solutions.
Open AccessRemoval Efficiency and Mechanism of Typical PPCPs onto Novel Cyclodextrin–Graphene Oxide Composite Adsorbent in Aqueous Solutions
A novel β-cyclodextrin–graphene oxide (β-CD/GO) composite adsorbent was synthesized via a hydrothermal method. Removal efficiency and mechanisms of typical pharmaceutical and personal care products (PPCPs) by the β-CD/GO composite were investigated in aqueous solutions. The results demonstrated that the β-CD/GO composite was successfully formed through cross-linking between β-CD and GO nanosheets, exhibiting enriched hydroxyl groups, a porous layered structure, and good thermal stability. The adsorption of cimetidine (CTD), sulfamethazine (SMZ), and diclofenac (DCF) onto the β-CD/GO composite was well described by pseudo-first-order and pseudo-second-order kinetic models, and Langmuir isotherm. The maximum adsorption capacities of CTD, SMZ, and DCF onto the β-CD/GO composite were 58.86, 35.62, and 29.11 mg g−1 at 298 K, respectively. The adsorption process was rapid and reached equilibrium after 6 h. The adsorption followed a monolayer mechanism and was an exothermic process. The adsorption capacity decreased with increasing pH values and ion concentrations. The β-CD/GO composite exhibited maximum adsorption capacities of 17.69, 16.96, and 16.23 mg g−1 for CTD, SMZ, and DCF, respectively, under a pH of 4 with a dosage of 1.0 g/L at 298 K for 6 h. Due to the combined impacts of electrostatic interaction, hydrogen bonding, and host–guest interaction, the adsorption of PPCPs onto β-CD/GO composite was fast and efficient. β-CD/GO composite exhibited superior adsorption efficacy and structural stability, which highlighted its promising application in the elimination of micropollutants from aqueous solutions.
- Open Access
- 22 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 6306
Surfactant-Modified Construction Waste Bricks for the Removal of Diclofenac from Aqueous Solutions
This study aimed to enhance the efficiency of construction waste bricks (PRBPs) in removing diclofenac (DFC) by preparing surfactant-modified waste bricks (CCBPs) as adsorbents. The properties of the adsorbents were analyzed, and the parameters related to the adsorption process were examined. The findings demonstrate that the addition of cetyltrimethyl ammonium bromide (CTAB) significantly improved the ability of the waste bricks to adsorb DCF. The pH values affected the adsorption behavior, with the adsorption decreasing as the pH increased. The adsorption process followed the pseudo-first-order kinetic equation, and the rate of adsorption was fast. The Langmuir model was used to fit the adsorption isotherms. According to the adsorption thermodynamics, the adsorption of DCF onto both adsorbents was exothermic, and it was more favorable at lower temperatures. The adsorption capacity of the CCBPs decreased sharply as the KCl concentration increased. The mechanism of adsorption might be explained by the interplay of the π-π interaction, surface complexation, and electrostatic interaction. This study offers a new method for removing micropollutants from aqueous solutions using waste bricks, thus extending the scope of their reuse applications.
- 22 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 6306
Open AccessSurfactant-Modified Construction Waste Bricks for the Removal of Diclofenac from Aqueous Solutions
This study aimed to enhance the efficiency of construction waste bricks (PRBPs) in removing diclofenac (DFC) by preparing surfactant-modified waste bricks (CCBPs) as adsorbents. The properties of the adsorbents were analyzed, and the parameters related to the adsorption process were examined. The findings demonstrate that the addition of cetyltrimethyl ammonium bromide (CTAB) significantly improved the ability of the waste bricks to adsorb DCF. The pH values affected the adsorption behavior, with the adsorption decreasing as the pH increased. The adsorption process followed the pseudo-first-order kinetic equation, and the rate of adsorption was fast. The Langmuir model was used to fit the adsorption isotherms. According to the adsorption thermodynamics, the adsorption of DCF onto both adsorbents was exothermic, and it was more favorable at lower temperatures. The adsorption capacity of the CCBPs decreased sharply as the KCl concentration increased. The mechanism of adsorption might be explained by the interplay of the π-π interaction, surface complexation, and electrostatic interaction. This study offers a new method for removing micropollutants from aqueous solutions using waste bricks, thus extending the scope of their reuse applications.
- Open Access
- 14 August 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (16) , 3346
Preparation and Removal Properties of Cimetidine from Aqueous Solution by Waste Bricks Incorporated with Different Iron Oxides
In this study, to investigate the elimination of micropollutant from aqueous solutions by construction waste, waste red brick (WRB) with and without incorporated of iron species (goethite and hematite) were prepared by a simple method. The prepared materials were systematically characterized and batch experiments were conducted to study the elimination of typical micropollutant cimetidine from the water environment. Results showed that both two iron species could be successfully incorporated onto WRB and the main structure of WRB were maintained. The adsorption process of cimetidine onto bricks was fast due to the microstructure and useful adsorption sites on the surface of bricks. The Langmuir model fitted the experimental data better and the qmax of cimetidine increased about 24.4% and 39.6% for the incorporation of hematite and goethite, respectively. The pH values influenced the adsorption behavior greatly and the favorable pH value was around 6.0. The charge screening effect and competition adsorption may influence the adsorption behavior together. Due to the interaction between cimetidine and bricks, the outer-sphere complexation may be formed in the adsorption process. This study shows new methods for the elimination of the micropollutant from the water environment and offers useful guidelines for the reuse of construction waste.
- 14 August 2019
- Published by MDPI AG in Applied Sciences
- Vol. 9 (16) , 3346
Open AccessPreparation and Removal Properties of Cimetidine from Aqueous Solution by Waste Bricks Incorporated with Different Iron Oxides
In this study, to investigate the elimination of micropollutant from aqueous solutions by construction waste, waste red brick (WRB) with and without incorporated of iron species (goethite and hematite) were prepared by a simple method. The prepared materials were systematically characterized and batch experiments were conducted to study the elimination of typical micropollutant cimetidine from the water environment. Results showed that both two iron species could be successfully incorporated onto WRB and the main structure of WRB were maintained. The adsorption process of cimetidine onto bricks was fast due to the microstructure and useful adsorption sites on the surface of bricks. The Langmuir model fitted the experimental data better and the qmax of cimetidine increased about 24.4% and 39.6% for the incorporation of hematite and goethite, respectively. The pH values influenced the adsorption behavior greatly and the favorable pH value was around 6.0. The charge screening effect and competition adsorption may influence the adsorption behavior together. Due to the interaction between cimetidine and bricks, the outer-sphere complexation may be formed in the adsorption process. This study shows new methods for the elimination of the micropollutant from the water environment and offers useful guidelines for the reuse of construction waste.
- Open Access
Systematic Investigation of the Synergistic and Antagonistic Effects on the Removal of Pyrene and Copper onto Mesoporous Silica from Aqueous Solutions
Polycyclic aromatic hydrocarbons (PAHs) and heavy metals have attracted greater attention due to their single or complex risks. It is urgent to find useful methods to remove these two pollutants together. In this study, SBA15 and MCM-41 were selected and used for the simultaneous removal of pyrene and copper from aqueous solution. Batch experiments were conducted systematically by investigating the adsorption behavior and effects including kinetics, isotherms, ionic strength and pH effects. Experimental results showed that the Langmuir and pseudo-second-order model fitted the adsorption behavior better. The solution pH values and ionic strength affected the adsorption behavior greatly. Furthermore, the synergistic or antagonistic effects could be observed on the adsorption of pyrene and copper onto MCM-41 and SBA15, respectively. The synergistic and antagonistic effects of pyrene and copper onto mesoporous silica may be attributed to the size of pyrene–copper complex and the average pore size of adsorbents. With the higher pore size, the complex would be adsorbed onto the inner surface of MCM-41 which showed synergistic effect on the adsorption of pyrene and copper. This study shows new guidelines and insight into the study of adsorption behavior of PAHs and heavy metals from aquatic environments.
Open AccessSystematic Investigation of the Synergistic and Antagonistic Effects on the Removal of Pyrene and Copper onto Mesoporous Silica from Aqueous Solutions
Polycyclic aromatic hydrocarbons (PAHs) and heavy metals have attracted greater attention due to their single or complex risks. It is urgent to find useful methods to remove these two pollutants together. In this study, SBA15 and MCM-41 were selected and used for the simultaneous removal of pyrene and copper from aqueous solution. Batch experiments were conducted systematically by investigating the adsorption behavior and effects including kinetics, isotherms, ionic strength and pH effects. Experimental results showed that the Langmuir and pseudo-second-order model fitted the adsorption behavior better. The solution pH values and ionic strength affected the adsorption behavior greatly. Furthermore, the synergistic or antagonistic effects could be observed on the adsorption of pyrene and copper onto MCM-41 and SBA15, respectively. The synergistic and antagonistic effects of pyrene and copper onto mesoporous silica may be attributed to the size of pyrene–copper complex and the average pore size of adsorbents. With the higher pore size, the complex would be adsorbed onto the inner surface of MCM-41 which showed synergistic effect on the adsorption of pyrene and copper. This study shows new guidelines and insight into the study of adsorption behavior of PAHs and heavy metals from aquatic environments.
- Open Access
The Systematic Adsorption of Diclofenac onto Waste Red Bricks Functionalized with Iron Oxides
In this study, waste red bricks were incorporated with iron oxides (goethite and hematite) and used for the removal of diclofenac (DCF) from aqueous solutions. The prepared waste red bricks were systematically characterized by XRF, XRD, BET, and SEM. The batch experiments were systematically conducted by investigating the adsorption kinetics, isotherms, thermodynamics, pH, and ionic strength effect. Results showed that the incorporation of iron oxides could enhance the adsorption capacity of DCF onto waste bricks, while the increased effect of hematite was better than goethite. DCF was adsorbed rapidly onto waste bricks, and the adsorption kinetic fitted the pseudo-second-order model perfectly, which could be attributed to the strong interaction between DCF and iron oxides. The increasing pH values decreased the adsorption capacity greatly, which may be due to the electrostatic repulsive interactions. The adsorption of DCF onto waste bricks was an exothermic reaction, and the adsorption isotherms fitted well with the Langmuir model. This study offers new guidelines for the utilization of construction waste, and shows useful methods for the elimination of micropollutants from aqueous solution.
Open AccessThe Systematic Adsorption of Diclofenac onto Waste Red Bricks Functionalized with Iron Oxides
In this study, waste red bricks were incorporated with iron oxides (goethite and hematite) and used for the removal of diclofenac (DCF) from aqueous solutions. The prepared waste red bricks were systematically characterized by XRF, XRD, BET, and SEM. The batch experiments were systematically conducted by investigating the adsorption kinetics, isotherms, thermodynamics, pH, and ionic strength effect. Results showed that the incorporation of iron oxides could enhance the adsorption capacity of DCF onto waste bricks, while the increased effect of hematite was better than goethite. DCF was adsorbed rapidly onto waste bricks, and the adsorption kinetic fitted the pseudo-second-order model perfectly, which could be attributed to the strong interaction between DCF and iron oxides. The increasing pH values decreased the adsorption capacity greatly, which may be due to the electrostatic repulsive interactions. The adsorption of DCF onto waste bricks was an exothermic reaction, and the adsorption isotherms fitted well with the Langmuir model. This study offers new guidelines for the utilization of construction waste, and shows useful methods for the elimination of micropollutants from aqueous solution.
- Open Access
Simultaneous Determination of 24 Antidepressant Drugs and Their Metabolites in Wastewater by Ultra-High Performance Liquid Chromatography–Tandem Mass Spectrometry
Antidepressants are a new kind of pollutants being increasingly found in wastewater. In this study, a fast and sensitive ultra-high performance liquid chromatography-tandem mass spectrometry method was developed and validated for the analysis of 24 antidepressant drugs and six of their metabolites in wastewater. This is the first time that the antidepressant residues in wastewater of Beijing (China) were systematically reported. A solid-phase extraction process was performed with 3 M cation disk, followed by ultra-high performance liquid chromatography–tandem mass spectrometry measurements. The chromatographic separation and mass parameters were optimized in order to achieve suitable retention time and good resolution for analytes. All compounds were satisfactorily determined in one single injection within 20 min. The limit of quantification (LOQ), linearity, and extraction recovery were validated. The LOQ for analytes were ranged from 0.02 to 0.51 ng/mL. The determination coefficients were more than 0.99 within the tested concentration range (0.1–25 ng/mL), and the recovery rate for each target compound was ranged from 81.2% to 118% at 1 ng/mL. This new developed method was successfully applied to analysis the samples collected from Beijing municipal wastewater treatment plants. At least ten target antidepressants were found in all samples and the highest mean concentration of desmethylvenlafaxin was up to 415.6 ng/L.
Open AccessSimultaneous Determination of 24 Antidepressant Drugs and Their Metabolites in Wastewater by Ultra-High Performance Liquid Chromatography–Tandem Mass Spectrometry
Antidepressants are a new kind of pollutants being increasingly found in wastewater. In this study, a fast and sensitive ultra-high performance liquid chromatography-tandem mass spectrometry method was developed and validated for the analysis of 24 antidepressant drugs and six of their metabolites in wastewater. This is the first time that the antidepressant residues in wastewater of Beijing (China) were systematically reported. A solid-phase extraction process was performed with 3 M cation disk, followed by ultra-high performance liquid chromatography–tandem mass spectrometry measurements. The chromatographic separation and mass parameters were optimized in order to achieve suitable retention time and good resolution for analytes. All compounds were satisfactorily determined in one single injection within 20 min. The limit of quantification (LOQ), linearity, and extraction recovery were validated. The LOQ for analytes were ranged from 0.02 to 0.51 ng/mL. The determination coefficients were more than 0.99 within the tested concentration range (0.1–25 ng/mL), and the recovery rate for each target compound was ranged from 81.2% to 118% at 1 ng/mL. This new developed method was successfully applied to analysis the samples collected from Beijing municipal wastewater treatment plants. At least ten target antidepressants were found in all samples and the highest mean concentration of desmethylvenlafaxin was up to 415.6 ng/L.