Mahmood R. S. Shirazy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mahmood R. S. Shirazy has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Abdelkader Souifi
Laboratoire des Technologies de la Microlectronique, Laboratoire Ampre, National Institute of Applied Sciences, Villeurbanne cedex, France
1 shared publication - Jean-Philippe Colonna
CEA-LETI, 38054 Grenoble, France
1 shared publication - Louis-Michel Collin
Interdisciplinary Institute for Technological Innovation (3IT) and UMI-LN2, Université de Sherbrooke, Sherbrooke, QC J1K 2R1, Canada
1 shared publication - Luc Guy Frechette
Université de Sherbrooke
1 shared publication Perceval Coudrain
STMicroelectronics, F-38920 Crolles, France
1 shared publication- Severine Cheramy
CEA Léti - MINATEC; 17 rue des Martyrs; F-38054 GRENOBLE - France
1 shared publication
Latest Publications
- 8 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (3) , 434-445
Add-On Microchannels for Hotspot Thermal Management of Microelectronic Chips in Compact Applications
This work demonstrates an experimental microchannel solution to cool microelectronic chips with hot spots, using an integrated, yet non-intrusive technique. In microelectronics, approaches such as die thinning induce acute stress on cooling because it increases the hot spot phenomena and reduces chip bulk thickness that could be used for microchannels. In compact devices, heat must be removed using limited pumping power and cooling space. Microchannels etched in the backside of the chip, usually considered as an efficient cooling solution, are impracticable on highly thinned chips. This work experimentally investigates the cooling performance of a non-invasive and hot spot aware microchannel die that is in direct fluidic contact with the backside of the microelectronic chip. It also proposes a confinement-wise metric. A thermal resistance of 2.8 °C/W is achieved at a heat flux of 812 W/cm2 per heat source, for a total dissipated power of 20 W and a maximum allowed temperature rise of 55 °C. Such performance is obtained with only 19.2 kPa of pressure drop and 9.4 ml/min of flow rate, corresponding to a hydraulic power of only 3 mW and a coefficient of performance of 6 500. In addition, the complete chip stack, including the thinned chip, measures only 660 μm high. Therefore, backside cooling appears to be a promising compact and low consumption solution for compact electronic applications having confined hot spots.
- 8 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (3) , 434-445
Add-On Microchannels for Hotspot Thermal Management of Microelectronic Chips in Compact Applications
This work demonstrates an experimental microchannel solution to cool microelectronic chips with hot spots, using an integrated, yet non-intrusive technique. In microelectronics, approaches such as die thinning induce acute stress on cooling because it increases the hot spot phenomena and reduces chip bulk thickness that could be used for microchannels. In compact devices, heat must be removed using limited pumping power and cooling space. Microchannels etched in the backside of the chip, usually considered as an efficient cooling solution, are impracticable on highly thinned chips. This work experimentally investigates the cooling performance of a non-invasive and hot spot aware microchannel die that is in direct fluidic contact with the backside of the microelectronic chip. It also proposes a confinement-wise metric. A thermal resistance of 2.8 °C/W is achieved at a heat flux of 812 W/cm2 per heat source, for a total dissipated power of 20 W and a maximum allowed temperature rise of 55 °C. Such performance is obtained with only 19.2 kPa of pressure drop and 9.4 ml/min of flow rate, corresponding to a hydraulic power of only 3 mW and a coefficient of performance of 6 500. In addition, the complete chip stack, including the thinned chip, measures only 660 μm high. Therefore, backside cooling appears to be a promising compact and low consumption solution for compact electronic applications having confined hot spots.