Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohammad Yaghoub Abdollahzadeh Jamalabadi has a total of 85 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermal Management Across Electronics, Data Centers, and Electric Vehicles: A Heat-Flux-Centered Review of Cooling Technologies and System Integration

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi, Ali Lavajoo

    Thermal management is becoming a first-order design constraint in high-performance electronics, artificialintelligence data centers, and electrified transportation. The common driver is a rapid increase in power density: processors and power modules dissipate more heat from smaller areas, data centers concentrate unprecedented electrical loads in individual racks, and electric vehicles must sustain fast charging while protecting batteries, inverters, and motors from temperature-driven degradation. This review connects these three application areas through a heat-flux-centered framework. It first revisits conduction, convection, radiation, thermal-resistance networks, and interface losses, then evaluates air cooling, heat pipes and vapor chambers, cold plates, microchannels, immersion and two-phase methods, phase-change materials, advanced thermal-interface materials, and wide-bandgap device constraints. Data-center sections address PUE, liquid-cooling architectures, free cooling, heat recovery, water and carbon metrics, and the growing role of standards. The electric-vehicle discussion covers battery temperature limits, thermal-runaway prevention, liquid and refrigerant-assisted cooling, heat pumps, power-electronics cooling, motor cooling, and fast-charge preconditioning. Cross-cutting topics include nanofluids, liquid metals, electromagnetic pumping, machine-learning-based control, additive manufacturing, phase-change materials, and thermoelectric technologies. The central conclusion is that future thermal systems will increasingly be co-designed with the electronic hardware itself, combining targeted high-flux cooling, intelligent control, and sustainability constraints rather than treating cooling as a downstream auxiliary system.

  • Open Access

    Reliability-Qualified Aerodynamic Benefits and Geometric Structural-Capacity Trade-Offs in Shape-Modified Low-Reynolds-Number Airfoils for Small Wind Turbines

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi, Ali Lavajoo

    Shape modification of low Reynolds number airfoils is often measured by lift-to-drag ratio increase but the change in geometric envelope available for load carrying blade structure is rarely quantified. In this study a reliability qualified post optimization framework is developed to quantify this tradeoff using five smallwind turbine airfoils (E387, RG15, S2055, SD6060 and BW-3) and their previously reported modified geometries. Coordinate maximum thickness camber enclosed sectional area centroidal second moments of area conservative section modulus proxies local section depth were evaluated for the ten endpoint geometries. Reliability qualified endpoint aerodynamic performance was considered over Re= 1×10 5-1×10 6. Intermediate states at λ= 0 , 0.25 , 0.50 , 0.75 , and 1.00 were also studied at Re = 2×10 5 , 5×10 5 and 9×105 to investigate evolution between baseline and modified geometries giving a total of 75 morphingpath aerodynamic cases. The endpoint geometric penalties were highly non-uniform: BW-3 reduced normalized enclosed area by about 58.2%, Ixx * by 56.3% and minimum section-modulus proxy by 52.2% but only about 32.0% was retained for minimum sampled local depth. Morphing trajectories also showed that aerodynamic benefit was not always proportional to the degree of geometric modification: at Re = 9 × 10 5 SD6060 gave about 49.5% improvement in peak aerodynamic efficiency at a geometric sectionmodulus cost of about 15.0% whereas BW-3 gave similar 48.9% improvement at about 52.2%. Of the 75 morphing simulations, 43 were complete; 29 peak valid incomplete; two peak uncertain and one invalid. Sampled path non-dominance analysis also showed that fully modified endpoints were not always retained: intermediate states dominated the final S2055 geometry under all three Reynolds numbers and late E387 states under several conditions. Hence our proposed framework provides a geometry-resolved screening technique to identify modifications that preserve relatively larger section level geometric capacity without implying full blade level structural performance.

  • Open Access

    A Convergence-Aware Assessment of Peak-Performance Reproducibility in XFOIL Simulations of Low-Reynolds-Number Wind-Turbine Airfoils

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi, Ali Lavajoo

    XFOIL is widely used for preliminary aerodynamic screening and optimization of low-Reynolds-number airfoils because it combines low computational cost with viscous-inviscid interaction and transition modeling. Optimization studies usually look for performance improvements from the maximum lift-to-drag ratio stored in a polar, but the convergence history of angle-of-attack sequence is rarely addressed explicitly. In this study we perform a convergence aware reproducibility audit of five low Reynolds number wind turbine airfoils (E387, RG15, BW-3, SD6060 and S2055) and their previously proposed modified geometries. One hundred XFOIL cases were examined over Re = 1×10 5 to 1×10 6 , angles of attack from 0° to 10° by steps of 0.5°. Raw polar files, lift to drag data, geometry files, input scripts and complete solver logs were cross checked point by point. We introduced a peak-reliability framework to distinguish between complete sweeps (all 21 operating points were available), incomplete polars with local maximum resolved, peak uncertain runs with failed neighboring operating point and invalid runs in which no meaningful optimum was found. Only 59 of the 100 sweeps had all 21 intended operating points and 102 top-level operating-point VISCAL convergence failures were found but 95 cases still had a resolved local peak neighborhood. Of the 50 baseline-to-modified performance comparisons: 45 were reliable; three were peak uncertain; two were invalid. All 30 comparisons for RG15, S2055 and SD6060 were reliable whereas BW-3 and E387 contained critical failures. At Re =106 rerun gains were 17.20%, 17.90%, 23.95%, 67.80% and an observed 15.18% for RG15, S2055, SD6060, BW-3 and E387 respectively compared with previously reported values of 16.81%, 17.82%, 21.73%, 74.26% and 22.81%. The results show that the largest stored CL/CD value should not be interpreted automatically as a resolved aerodynamic optimum and pointwise convergence information should be retained and reported in low Reynolds number XFOIL optimization studies.

  • Open Access

    The Crack Clock: A Three-Stage Analytical Framework Predicting When Humidity Will Damage a Panel Painting

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi

    This study presents an analytical framework to predict moisture-induced damage in biosystem composites, using wooden panel paintings as a model system. It brings together a transient diffusion equation, a bilayer hygroscopic stress equation, and a fracture-mechanics evaluation, and from these gets closed-form expressions for the critical exposure time – a quantity that lets one screen durability quickly, without running a simulation each time. For the wood types studied here, hygroscopic expansion coefficients fall between and; the corresponding critical RH thresholds run from 39.1% to 62.9%, and exposure times span 45.4 days (1090 h, the shortest case) up to more than 180 days (the model was checked against data and matched within 3.8% MAPE). A closed-form separation-line criterion is also derived, giving a simple safe/unsafe crack-depth boundary that can be evaluated without re-running the full ASED calculation. Taken together, the results give conservators a way to rank how vulnerable different species are, point toward more eco-friendly material choices, and suggest safe operating conditions that extend service life, cut down on replacement cycles, and help manage conservation resources while keeping energy costs low. Comparison with EN 16893:2018 indicates that its 30–65% RH band is safe for all species studied when objects are kept above 20% RH, but may be insufficient for objects previously stored below 20% RH; we recommend the standard be revised to include species-specific maximum ΔRH limits and an explicit warning for this low-RH scenario.

  • Open Access

    Optimization for Next-Generation Wind Farms

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi

    The levelized cost of energy (LCOE) is the definitive metric for wind farm viability, yet its minimization demands coordinated optimization across turbine sizing, spatial layout, wake management, structural fatigue, forecasting, and grid integration—domains traditionally treated in isolation. This review synthesizes 2024–2026 literature spanning onshore, offshore, and floating configurations to reveal how these disciplines are converging into a unified design optimization framework. Three findings anchor the analysis: offshore turbine sizing has converged near 15– 15.5 MW; multi-type turbine layouts reduce LCOE by nearly 5% versus single-type designs; and lifetime-aware optimization that accounts for wake-induced blade fatigue eliminates a hidden 7% LCOE penalty invisible to conventional annual-energy-production objectives. We trace the theoretical foundation from one-dimensional momentum theory and the Betz limit (16/27) through composite material characterization—including anisotropic stiffness models, micromechanics, and fatigue-driven stiffness degradation—to blade testing, aeroelastic modeling, and probabilistic life prediction. The fatigue phenomenon is examined in depth: cyclic loading environments, damage mechanisms in composites, S–N formulations, cycle-counting rules, and reliability-based life prediction. Measurement technologies—cup anemometry, LiDAR, load sensors—and wind power forecasting are positioned as first-class economic variables that determine AEP uncertainty and risk premiums. We identify critical gaps: the integration of fatigue and stiffness degradation models into farm-level layout optimization, forecast uncertainty quantification, validation against in-service load data, and site-specific techno-economic calibration. The review concludes that LCOE minimization has transitioned from a geometric layout problem to a multidisciplinary design optimization challenge requiring co-optimization of aerodynamic efficiency, structural reliability, forecast-driven operation, and market conditions.

  • Open Access

    Analytical and Numerical Treatment of Nonlinear Diffusion for HTGR applications

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi

    This work presents a unified treatment of nonlinear diffusion governed by \(D(C)=D_0C^n\), bridging exact analytical solutions with advanced numerical methods for nuclear and engineering applications. Exact Barenblatt solutions for instantaneous line sources capture finite-speed propagation and compact support. For finite domains, early-time similarity reductions provide correct front exponents, while front-tracking and moment-balance methods yield profile exponents \(m=1/n\) and \(p=2/(2n+1)\). Empirical correlations for effective case depth in carburized steels, validated with \(R^2>0.993\), are derived. The second part addresses pebble-bed high-temperature gas-cooled reactor (HTGR) multiphysics. The Equivalent Low-order Nonlinear Elimination (NLE-EL) framework reduces computational cost by a factor of 60 while preserving Newton-like convergence by expressing pebble variables as functional mappings and using a low-order surrogate during Jacobian assembly. Validation against TINTE for a reactivity-insertion transient shows peak fuel-temperature differences below \(0.01^\circ\)C and a 3.78\(\times\) speed-up. This integrated approach provides both fundamental insight and practical computational efficiency for complex multi-scale engineering systems.

  • Open Access

    Optimal Design of Textiles based on Metabolism Rate and Fat Ratio

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi

    Constructal theory predicts that a moving body settles on a compromise between carrying inactive mass, such as fat, and shedding heat to its surroundings. Clothing changes that compromise: by cutting heat loss, it lets the body get away with thinner natural insulation, but how much depends on the fabric’s porosity. We build a biophysical model that links three heat pathways in series—conduction through the fat layer, convection at the skin, and transfer through agarment whose insulating power is setbya dimensionless porosity parameter—and combine them in a single cost function. That function charges a penalty both for the metabolic burden of surplus fat and for the manufacturing and weight cost of dense, low-porosity textiles. Minimizing it simultaneously over body fat fraction and porosity yields the joint optimum (Bopt, opt) for a given climate and activity level. The model predicts that more breathable fabric pushes the optimal fat fraction upward to make up the extra heat loss, while tighter, less porous fabric lowers the fat requirement at the price of a steeper textile cost. Extending the model to exercise conditions shows the same logic reversing: once evaporative cooling becomes the binding constraint, the optimum shifts sharply toward high porosity regardless of ambient temperature. Together these results offer a physical account of why human clothing has historically settled on intermediate breathability rather than fully sealed or fully open weaves, and they point to a practical design rule—matching porosity to activity level—for minimizing the combined “movement drag” of fat and fabric.

  • Open Access

    La₃Ni₂O₇: The Spin-Crossover Affair

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi

    The discovery of superconductivity near 80 K in the bilayer Ruddlesden-Popper nickelate La₃Ni₂O₇ under applied pressure has established the third family of unconventional high-temperature superconductors and ignited a new wave of activity in condensed matter physics. In this review, we place bilayer nickelates firmly within the broader landscape of correlated-electron superconductors, offering a systematic comparison to cuprates, iron-based materials, and heavy-fermion systems. We survey the key experimental milestones: the initial pressure-driven discovery, the recent realization of ambient-pressure superconductivity in epitaxially strained thin films, the characterization of competing spin and charge density wave orders, and the determination of a two-gap superconducting structure via Andreev reflection spectroscopy. Drawing on recent theoretical advances, we argue that the central organizing principle of this system is a pressure-driven crossover in the nickel electronic ground state-from a high-spin (S = 3/2) configuration at ambient pressure, stabilized by strong Hund's coupling across the two (eg) orbitals, to a low-spin (S = 1/2) metallic state under pressure. This crossover activates orbital-selective correlations and provides the spin-fluctuation glue for magnetically mediated Cooper pairing. The resulting picture unifies the coexistence of orbital selectivity, competing order, and high (Tc) in a single framework. Bilayer nickelates thus emerge as a distinctive bridge: they connect the single-orbital Mott physics of the cuprates with the multi-orbital Hund's metal physics of the iron-based superconductors, while introducing a new interlayer pairing mechanism unique to the bilayer geometry.

  • Open Access

    The Ferrofluidic Liquid Metal Revolution: Breaking the 10 kW/cm2 Thermal Wall with Electromagnetically Actuated Jet Impingement for AI Chips and EV Inverters

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi

    This comprehensive review paper examines three interconnected domains that represent the forefront of thermal engineering challenges in the 21st century: electronic cooling, data center thermal management, and electric vehicle battery and powertrain thermal systems. As power densities continue to escalate across all three domains — driven by miniaturi-zation in consumer electronics, explosive growth in cloud computing and artificial intel-ligence workloads, and the global transition to electrified transportation — the effective dissipation of heat has emerged as a critical bottleneck constraining performance, reliabil-ity, and energy efficiency. This paper systematically reviews fundamental heat transfer mechanisms, state-of-the-art cooling technologies, emerging materials and architectures, and the evolving regulatory and sustainability landscape. Key findings indicate that two-phase immersion cooling, advanced heat pipe systems, microchannel heat exchang-ers, and phase change materials are among the most promising near-term solutions. Long-term advances hinge on the integration of intelligent thermal management systems leveraging machine learning, novel nanofluids, and topology-optimized heat sink de-signs. The convergence of these technologies across sectors presents unique cross-disciplinary opportunities and is expected to define the trajectory of thermal engi-neering research through 2035 and beyond.

  • Open Access

    Multi-Source Acoustic Arrays Induce Volumetric Bulk Cracking in Stone Analogues: A Phase-Field Computational Study with Implications for Next-Generation Lithotripters

    by Mohammad Yaghoub Abdollahzadeh Jamalabadi

    Background: Extracorporeal shock wave lithotripsy (ESWL) remains a non invasive option for urolithiasis, but its stone free rates are inferior to endoscopic alternatives, particularly for dense calculi. The physical mechanisms governing shock wave induced fracture—especially the role of multi source acoustic arrays—are incompletely understood. Furthermore, the presence of heavy metals (e.g., cadmium, lead, arsenic) in some kidney stones may increase fragmentation resistance. Methods: We conducted a systematic synthesis of 22 meta analyses comparing ESWL, ureteroscopic laser lithotripsy (URSL), retrograde intrarenal surgery (RIRS), and percutaneous nephrolithotomy (PCNL). Separately, we developed a novel axisymmetric phase field damage model coupling nonlinear pressure acoustics in water with elastodynamics in a heavy metal stone analogue, incorporating acoustic structure interaction and Ginzburg–Landau fracture evolution. Simulations compared single monopole versus ten monopole source configurations. Results: Clinical synthesis confirms that ESWL has the lowest complication rate (RR 0.58, 95% CI 0.51–0.66) but significantly lower stone free rates than RIRS (RR 0.57) and URSL (RR 0.58). Computationally, the ten source array produced constructive interference that shifted peak von Mises stress from the fluid solid interface to the stone center. This altered the fracture mechanism from surface dominated spallation to volumetric bulk cracking, increasing the phase field damage volume fraction by approximately 300% and promoting finer fragmentation (“dusting”). Heavy metal content (Cd, Pb, As) correlated with increased stone risk (19–69% higher odds) and may also reduce fragmentation efficiency. Conclusions: Multi source acoustic arrays fundamentally improve stone comminution by inducing volumetric bulk cracking rather than surface spallation. This computational evidence supports the design of next generation lithotripters with multiple, phased sources to achieve higher stone free rates while preserving the low complication profile of ESWL. Integration of stone density, heavy metal content, and array configuration may enable personalized shock wave protocols.