Albert Zeller
Research Subjects
Research Interests
Albert Zeller has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Bernhard Walfort
LumiNova AG Switzerland Speicherstrasse 60a CH-9053 Teufen Switzerland
1 shared publication - Christian Grünzweig
Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institut, Switzerland.
1 shared publication - Malgorzata Grazyna Makowska
Photon Science Division, Paul Scherrer Institut, Villigen PSI, SWITZERLAND
1 shared publication - Thomas Bücherl
Technische Universität München - ZTWB Radiochemie
1 shared publication
Latest Publications
- Open Access
- 10 December 2017
- Published by MDPI AG in Journal of Imaging
- Vol. 3 (4) , 60
Performance of the Commercial PP/ZnS:Cu and PP/ZnS:Ag Scintillation Screens for Fast Neutron Imaging
Fast neutron imaging has a great potential as a nondestructive technique for testing large objects. The main factor limiting applications of this technique is detection technology, offering relatively poor spatial resolution of images and low detection efficiency, which results in very long exposure times. Therefore, research on development of scintillators for fast neutron imaging is of high importance. A comparison of the light output, gamma radiation sensitivity and spatial resolution of commercially available scintillator screens composed of PP/ZnS:Cu and PP/ZnS:Ag of different thicknesses are presented. The scintillators were provided by RC Tritec AG company and the test performed at the NECTAR facility located at the FRM II nuclear research reactor. It was shown that light output increases and the spatial resolution decreases with the scintillator thickness. Both compositions of the scintillating material provide similar light output, while the gamma sensitivity of PP/ZnS:Cu is significantly higher as compared to PP/ZnS:Ag-based scintillators. Moreover, we report which factors should be considered when choosing a scintillator and what are the limitations of the investigated types of scintillators.
- 10 December 2017
- Published by MDPI AG in Journal of Imaging
- Vol. 3 (4) , 60
Open AccessPerformance of the Commercial PP/ZnS:Cu and PP/ZnS:Ag Scintillation Screens for Fast Neutron Imaging
Fast neutron imaging has a great potential as a nondestructive technique for testing large objects. The main factor limiting applications of this technique is detection technology, offering relatively poor spatial resolution of images and low detection efficiency, which results in very long exposure times. Therefore, research on development of scintillators for fast neutron imaging is of high importance. A comparison of the light output, gamma radiation sensitivity and spatial resolution of commercially available scintillator screens composed of PP/ZnS:Cu and PP/ZnS:Ag of different thicknesses are presented. The scintillators were provided by RC Tritec AG company and the test performed at the NECTAR facility located at the FRM II nuclear research reactor. It was shown that light output increases and the spatial resolution decreases with the scintillator thickness. Both compositions of the scintillating material provide similar light output, while the gamma sensitivity of PP/ZnS:Cu is significantly higher as compared to PP/ZnS:Ag-based scintillators. Moreover, we report which factors should be considered when choosing a scintillator and what are the limitations of the investigated types of scintillators.