RSRuslan Smolianets

Ruslan Smolianets

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ruslan Smolianets has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Role of Peierls relief in low-temperature plasticity of α-solid solution Ti–Nb

    by V. A. Moskalenko, R. V. Smolianets

    The most commonly used Ti alloys are two-phase, consisting of the α- (hcp) and β- (bcc) allotropes of Ti. Varying the relative phase contents (considering the properties of each) allows the production of alloys with specified physical and mechanical properties. This paper examines the dislocation mechanisms that govern the plastic deformation rate of α-Ti–Nb solid solutions, which are characterized by unique functional properties such as high corrosion resistance, superconductivity, and biocompatibility. The temperature dependences of the yield strength and strain rate sensitivity of α-Ti–Nb alloys under quasi-static tension in the temperature range of 1.7–423 K are determined. The experimental results are discussed within the framework of a theoretical model of thermoactivated dislocation string motion in the Peierls relief. It is shown that the studied temperature range can be divided into three intervals, each with its own specific characteristics of dislocation motion in the Peierls relief. In the temperature range of approximately 18 to 150 K, the plastic deformation of α-Ti–Nb substitutional solid solutions is governed by the overcoming of Peierls stresses by dislocations through the nucleation, expansion, and annihilation of kink pairs—a mechanism characteristic of high-purity titanium. In the temperature range from 150 to 423 K, prismatic slip is controlled by another, as yet unidentified, thermally activated process. At temperatures below 18 K, plasticity is governed by a thermo-inertial mechanism associated with the transition, as temperature decreases, from thermally activated dislocation motion to dynamic (over-the-barrier) motion driven by the inertial properties of dislocations.

  • Open Access

    Thermally Activated Acoustic Relaxation in Nanostructured and Ultrafine-Grained Titanium

    by Yuri Semerenko, Vasilij Natsik, Nikolai Galtsov, Diana Hurova, Tamara Bednarchuk, Peter Zinoviev, Viktor Zoryansky, Vladyslav Moskalenko, Ruslan Smolianets, Alexander Smirnov, et al.

    In the range of 5-325 K, the temperature dependence of acoustic properties - absorption and dynamic Young’s modulus - was studied in nanocrystalline and fine-crystalline technical purity titanium VT1-0. Measurements were performed using resonance mechanical spectroscopy at 2.4-3.7 kHz. The influence of grain size on low-temperature acoustic behavior was examined.Samples with varying grain sizes were produced by severe plastic deformation through rolling at 100 K and 290 K to true strains of 120-190%, followed by annealing at 525 K, 720 K, and 940 K. Their structures were characterized by electron microscopy and X-ray diffraction.Intense plastic deformation was found to induce an acoustic anomaly, peak P1, at 150-230 K. Transition from fine- to nanocrystalline states introduced an additional absorption peak, P2, at 43-78 K. A microscopic dislocation model was proposed to explain these phenomena. The activation parameters of P1 correspond to thermally activated detachment of dislocation segments from local defects, consistent with the Koiwa-Hasiguti peak. In contrast, the activation parameters of P2 reflect dislocation motion across a Peierls barrier via thermally activated kink pair formation, analogous to Bordoni peaks observed in fcc crystals.This study demonstrates how grain refinement and deformation strongly affect the acoustic response of titanium, revealing distinct mechanisms of dislocation dynamics at different temperature ranges.

  • Open Access

    Mechanisms of plastic deformation of cryorolled hafnium in the temperature range 1.7–430 K

    by V. A. Moskalenko, R. V. Smolianets, Yu. M. Pohribna, K. V. Kovtun, S. P. Stetsenko

    The stress-strain curves of coarse-grained and nanocrystalline hafnium were found under quasi-static uniaxial compression in the temperature range 1.7–430 K. The temperature dependences of the yield strength, rate sensitivity of the deforming stress, and activation volume of the plastic deformation process were determined. The nanoscale grain size was obtained by rolling at liquid nitrogen temperature. When discussing the physical nature of the features observed below 25 K, such as the transition from smooth at room and moderately low temperatures to jump-like plastic flow, as well as the athermicity of the temperature dependences of the yield stress and its rate sensitivity, theoretical hypotheses related to the manifestation of the inertial properties of dislocations were used. Experimental results for the temperature range above 25 K were discussed using the method of thermal activation analysis within the framework of the model of dislocations overcoming local barriers, and dislocation mechanisms that control the rate of plastic deformation were established.

  • Open Access

    Creation of a heterogeneous grain structure is a condition for increasing the low-temperature ductility of nanocrystalline hcp metals

    by V. A. Moskalenko, A. R. Smirnov, R. V. Smolianets, Yu. M. Pohribna

    The paper considers the influence of a heterogeneous (bimodal) grain structure on the ductility characteristics of commercial purity titanium in a wide range of low temperatures (4.2–395 K) as a strategy for optimizing mechanical properties within the framework of the “strength–plasticity” ratio. Using titanium as an example, the physical mechanism for increasing the low-temperature ductility of hcp nanocrystalline metals with a heterogeneous grain size distribution is explained by a combination of several processes: an increase in the activity of intragrain dislocation slip, dynamic grain growth under tensile stresses, and activation of nanotwinning in submicron-sized grains.

  • Dislocation mechanisms of low-temperature plasticity of nanocrystalline titanium: The role of impurity and grain boundary strengthening

    by V. A. Moskalenko, R. V. Smolianets, V. D. Natsik, Yu. M. Pohribna

    The temperature dependences of the yield strength, the strain rate sensitivity of the deforming stress and the activation volume of the process of plastic deformation of nanocrystalline titanium VT1-0 under quasi-static tension in the temperature range 4.2–395 K are found. The nanoscale grain size was obtained using the method of cryomechanical grain fragmentation. A detailed thermal activation analysis of the experimental results was carried out and it was shown that the process of plastic deformation under conditions of ambient and low temperatures is determined by the overcoming of local impurity barriers by dislocations, and grain boundaries are a source of internal stresses. Empirical estimates are obtained for the parameters of the dislocation-impurity interaction. The unambiguous relationship between internal stresses and grain size established for monomodal nanocrystalline titanium made it possible to separate the effects of impurity and grain boundary hardening. The result obtained is an indirect basis for the conclusion about the impossibility of accumulation of dislocations in nanograins during plastic deformation. The decrease in the activation volume for a nanoscale grain at a constant impurity concentration is considered because of the manifestation of the dependence of the diameter of the dislocation loop generated by a grain boundary source on the grain size (confinement effect).


  • Thermal stability of nanocrystalline and ultrafine-grained titanium created by cryomechanical fragmentation

    by Yu. M. Pogribnaya, R. V. Smolianets, V. A. Moskalenko, I. S. Braude

    Using X-ray diffraction analysis methods, the authors have studied the effect of stepwise isothermal annealing in the temperature range 150–670 C on the deformation microstructure parameters of cryodeformed VT1-0 titanium with micron, submicron, and nanoscale grain sizes. The structural states were obtained by rolling at liquid nitrogen temperature. This study discusses the influence of dislocations and twins as elements of deformation microstructure on the thermal stability of crystallite sizes (coherent scattering regions) and the magnitude of microdeformations. The dependences of microhardness on annealing temperature have been determined for samples in different initial structural states.


  • Open Access

    Kinetics of low-temperature plasticity of nanocrystalline titanium

    by R. V. Smolianets, V. A. Moskalenko

    The temperature dependences of the offset yield strength, strain-rate sensitivity of deformation stress, and the activation volume of plastic deformation in VT1-0 nanocrystalline titanium, have been determined under quasistatic tension in the temperature range 4.2–395 K. Thermal activation analysis of experimental data has been performed. The low-temperature plasticity of nanocrystalline titanium is shown to be controlled by the thermally activated passage of dislocations through local barriers formed by interstitial impurity atoms. The empirical values of the theoretical parameters of the dislocation–impurity interaction have been determined.


  • Low-Temperature feature of grain-boundary hardening of nanocrystalline titanium

    by R. V. Smolianets, V. A. Moskalenko

    The yield strength σ0.2 of titanium polycrystals in tension and in the temperature range of 4.2–395 K is studied as a function of grain size (d) ranging from micro- to nanometer dimensions. It was found that at temperatures below ∼180 K, the σ0.2 (d) dependences are not described by the classical Hall–Petch relation, shifting instead to higher stresses at nanometer size (d). The characteristics of grain-boundary hardening observed at low temperatures are explained using theoretical models, according to which in nanometer-size grains, the diameter of a dislocation loop originating at a grain boundary is proportional to d, with the nucleation stress being σ ∼ 1/d. The critical value dnc is estimated, below which the ratio σ0.2 ∼ 1/d holds at a fixed temperature. It is established that the dnc value decreases with an increase in the temperature of the experiment.


  • Anisotropy of the yield strength and structural parameters of nanocrystalline titanium obtained by cryodeformation

    by V. A. Moskalenko, Yu. M. Pohribnaya, R. V. Smolianets, I. S. Braude

    Anisotropy of the yield strength of nanocrystalline VT1-0 technical-grade titanium with grain size ∼45 nm, obtained by the cryomechanical grain fragmentation method, was studied. The experiments were carried out using the uniaxial compression regime at a nominal plastic deformation rate of 3.5 × 10−4 s−1 in the temperature range 4.2–300 K. The temperature dependences of the macroscopic yield strength of the samples with the compression axis parallel and perpendicular to the cryorolling direction were obtained. The anisotropy coefficient of the yield strength was calculated, and its temperature dependence was established. The parameters of the deformation microstructure in mutually orthogonal planes were determined: the crystallite (coherent scattering region) sizes and the magnitudes of microdeformations. It was observed that the crystallites are morphologically anisotropic. The calculated and experimental values of the yield strength of the samples deformed parallel and perpendicular to the cryorolling direction were found to be in agreement with the Hall–Petch ratio and the observed crystallite sizes. It was established that the anisotropy of the yield strength of nanocrystalline titanium is related to the shape anisotropy of its structural elements, such as a grain/crystallite.


  • Instability of plastic deformation of nanocrystalline titanium at low temperatures

    by R. V. Smolianets, V. A. Moskalenko

    A study of how changes to the grain size from micrometer to nanoscale values impact the titanium plastic deformation localization under quasi-static tension, at low temperatures. The impact the strain hardening rate, true stress and its strain rate sensitivity have on the sharp decrease in uniform deformation when nanocrystalline titanium is subjected to tension is determined. It is found that the appearance of submicron-sized grains in the nanomatrix (the creation of a bimodal structure) leads to an increase in the plasticity of titanium. This effect is enhanced at low temperatures as a result of the activation of twinning in larger grains.