Maksym Borysenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maksym Borysenko has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Serhii Zavhorodnii
State Enterprise «National Institute for Development Infrastructure» (SE «NIDI»), Kyiv, Ukraine
7 shared publications - Bohdan Zelenskyi
State Enterprise «National Institute for Development Іnfrastructure» (SE «NIDI»), Kyiv, Ukraine
3 shared publications - Liuda Panibratets
State Enterprise «National Institute for Development Іnfrastructure» (SE «NIDI»), Kyiv, Ukraine
2 shared publications - Pavlo Stashuk
State Enterprise «National Institute for Development Infrastructure» (SE «NIDI»), Kyiv, Ukraine
2 shared publications - Volodymyr Kaskiv
State Enterprise «National Institute for Development Іnfrastructure» (SE «NIDI»), Kyiv, Ukraine
2 shared publications - Anatolii Mudrychenko
Deputy head of department of technologies of road works of M.P. Shulgin State Road Research Institute State Enterprise – DerzhdorNDI SE, Kyiv, Ukraine
1 shared publication
Latest Publications
- 23 October 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (34) , 103-114
Practical aspects of chloride effects on reinforced concrete transportation structures
Chloride-induced reinforcement corrosion is a major cause of premature deterioration of reinforced concrete bridge elements exposed to cyclic wetting and de-icing agents. Visual inspection mainly records the propagation stage, whereas water-soluble chloride testing can identify hazardous conditions before widespread cracking and spalling. Chloride content, however, cannot by itself define the operational condition without considering reinforcement depth, moisture, cracking and electrochemical evidence. To generalize field measurements of water-soluble chlorides in six transportation structures in Kyiv, evaluate spatial variability and develop a practical diagnostic workflow. The study covered a bridge over the Lybid River and five overpasses near Poliarna Street, Portova Street and the Osokorky, Nyvky and Chernihivska metro stations. Visual inspection, core or local sampling, layer preparation and silver nitrate titration were used. After removing duplicate and missing records, 103 determinations expressed as percent of estimated cement mass were analyzed. Water-soluble chloride content ranged from 0.01 to 2.00 %, with a median of 0.55 %. Under the adopted limits for non-prestressed reinforcement, 23 results fell within the common range for conditions 1–3, 36 within condition 4, and 44 within condition 5; the corresponding counts for prestressed reinforcement were 19, 13, and 71. Thirty paired surface/deeper measurements confirmed a non-uniform chloride profile. Results should be interpreted using assessment levels corresponding to operational conditions 1–5, with separate limits for prestressed and non-prestressed reinforcement and samples taken at two levels. Chloride content alone does not distinguish conditions 1–3; the final condition requires visual, electrochemical, and structural evidence.
- 23 October 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (34) , 103-114
Practical aspects of chloride effects on reinforced concrete transportation structures
Chloride-induced reinforcement corrosion is a major cause of premature deterioration of reinforced concrete bridge elements exposed to cyclic wetting and de-icing agents. Visual inspection mainly records the propagation stage, whereas water-soluble chloride testing can identify hazardous conditions before widespread cracking and spalling. Chloride content, however, cannot by itself define the operational condition without considering reinforcement depth, moisture, cracking and electrochemical evidence. To generalize field measurements of water-soluble chlorides in six transportation structures in Kyiv, evaluate spatial variability and develop a practical diagnostic workflow. The study covered a bridge over the Lybid River and five overpasses near Poliarna Street, Portova Street and the Osokorky, Nyvky and Chernihivska metro stations. Visual inspection, core or local sampling, layer preparation and silver nitrate titration were used. After removing duplicate and missing records, 103 determinations expressed as percent of estimated cement mass were analyzed. Water-soluble chloride content ranged from 0.01 to 2.00 %, with a median of 0.55 %. Under the adopted limits for non-prestressed reinforcement, 23 results fell within the common range for conditions 1–3, 36 within condition 4, and 44 within condition 5; the corresponding counts for prestressed reinforcement were 19, 13, and 71. Thirty paired surface/deeper measurements confirmed a non-uniform chloride profile. Results should be interpreted using assessment levels corresponding to operational conditions 1–5, with separate limits for prestressed and non-prestressed reinforcement and samples taken at two levels. Chloride content alone does not distinguish conditions 1–3; the final condition requires visual, electrochemical, and structural evidence.
- 7 April 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (33) , 178-189
The oretical aspects of chloride effects on reinforced concrete transportation structures
Introduction. The article considers the fundamental problem of ensuring the durability of highway bridges under aggressive chloride action. The operational reliability of transport structures is largely determined by the condition of reinforced concrete structures exposed to de-icing agents and cyclic wetting. Problem Statement. Chloride-induced corrosion of reinforcement is one of the most dangerous degradation factors, leading to a loss of load-bearing capacity and premature failure of bridges. The existing regulatory framework of Ukraine only partially accounts for these processes, necessitating harmonization with international standards. Objective. The objective of this work is to systematize theoretical knowledge regarding chloride mass transport mechanisms, analyze the influence of mineral admixtures and carbonation on corrosion resistance, and review modern regulatory methods for determining chloride content to improve the national bridge monitoring system. Materials and Methods. Methods of analytical review of scientific literature and regulatory documents regarding diffusion processes, thermodynamic modeling of chloride binding, and probabilistic risk assessment methods were used. Results. The differences between free and bound forms of chlorides are analyzed, and the effect of carbonation on the release of bound salts is examined. Regulatory methodologies for determining water- and acid-soluble chlorides, their advantages, and limitations are described in detail. The necessity of transitioning from deterministic threshold values to probabilistic models of corrosion risk assessment is substantiated. Conclusions. The results demonstrate effective durability prediction of transport structures requires differentiated consideration of free and bound chlorides, especially for concretes with mineral admixtures and under carbonation conditions. The feasibility of implementing ASTM C876 and AASHTO T 260 methodologies into domestic bridge monitoring practice is substantiated. The proposed approach allows for the identification of corrosion processes at the initiation stage, which is a prerequisite for introducing asset management systems based on actual technical condition.
- 7 April 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (33) , 178-189
The oretical aspects of chloride effects on reinforced concrete transportation structures
Introduction. The article considers the fundamental problem of ensuring the durability of highway bridges under aggressive chloride action. The operational reliability of transport structures is largely determined by the condition of reinforced concrete structures exposed to de-icing agents and cyclic wetting. Problem Statement. Chloride-induced corrosion of reinforcement is one of the most dangerous degradation factors, leading to a loss of load-bearing capacity and premature failure of bridges. The existing regulatory framework of Ukraine only partially accounts for these processes, necessitating harmonization with international standards. Objective. The objective of this work is to systematize theoretical knowledge regarding chloride mass transport mechanisms, analyze the influence of mineral admixtures and carbonation on corrosion resistance, and review modern regulatory methods for determining chloride content to improve the national bridge monitoring system. Materials and Methods. Methods of analytical review of scientific literature and regulatory documents regarding diffusion processes, thermodynamic modeling of chloride binding, and probabilistic risk assessment methods were used. Results. The differences between free and bound forms of chlorides are analyzed, and the effect of carbonation on the release of bound salts is examined. Regulatory methodologies for determining water- and acid-soluble chlorides, their advantages, and limitations are described in detail. The necessity of transitioning from deterministic threshold values to probabilistic models of corrosion risk assessment is substantiated. Conclusions. The results demonstrate effective durability prediction of transport structures requires differentiated consideration of free and bound chlorides, especially for concretes with mineral admixtures and under carbonation conditions. The feasibility of implementing ASTM C876 and AASHTO T 260 methodologies into domestic bridge monitoring practice is substantiated. The proposed approach allows for the identification of corrosion processes at the initiation stage, which is a prerequisite for introducing asset management systems based on actual technical condition.
- 7 April 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (33) , 230-238
Analysis of american experience in the use of frost-resistant admixtures in reinforced concrete structures of transport facilities
Introduction. The article examines the U.S. experience regarding the use of frost-resistant admixtures in reinforced concrete structures of transport facilities. Technologies for increasing concrete durability under cyclic freezing and thawing conditions are analyzed, with examples of applications in bridges in the states of Minnesota, Michigan, and Alaska. The results of studies on the effectiveness of various types of admixtures and their impact on the performance characteristics of structures are presented. Opportunities for adapting the American experience in Ukraine are identified. Problem Statement. The main problem with reinforced concrete structures of transport facilities in cold regions is their insufficient resistance to freeze-thaw cycles. Water penetrating the concrete pores expands during freezing and creates internal stresses, leading to cracking, surface scaling, and gradual loss of strength. In the U.S., this issue is particularly relevant for bridges and road pavements in northern states, where the number of freeze-thaw cycles can exceed one hundred per year. The solution to this problem lies in the use of frost-resistant admixtures that reduce concrete permeability and increase its durability. Materials and Methods. To increase the frost resistance of concrete, American engineers use various types of admixtures: air-entraining agents that form micropores; mineral admixtures (fly ash, ground granulated blast-furnace slag, silica fume) that densify the structure of the cement paste; and modern nano-modified materials. Research methods include laboratory testing for freeze-thaw cycles, measuring concrete permeability, microstructure analysis, and long-term operational observations of actual transport structures. Results. Studies have shown that the use of air-entraining admixtures ensures concrete frost resistance at a level of 300–400 freeze-thaw cycles. The use of silica fume allows for a reduction in concrete permeability by 40–45%, significantly decreasing the risk of cracking. Composite admixtures (a combination of air-entraining agents with slag materials) demonstrate the highest efficiency — up to 500 cycles without loss of strength. Practical examples of bridges in Minnesota, Michigan, and Alaska confirm that such technologies extend the service life of structures by decades. Conclusions. The American experience proves that the use of frost-resistant admixtures is a key factor in ensuring the durability of transport structures in cold climates. The use of various types of admixtures allows for the adaptation of concrete mixes to specific operating conditions, reduces repair costs, and increases infrastructure reliability. For Ukraine, the implementation of similar technologies is relevant, taking into account local resources (fly ash, slag) and the improvement of the regulatory framework for controlling concrete frost resistance.
- 7 April 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (33) , 230-238
Analysis of american experience in the use of frost-resistant admixtures in reinforced concrete structures of transport facilities
Introduction. The article examines the U.S. experience regarding the use of frost-resistant admixtures in reinforced concrete structures of transport facilities. Technologies for increasing concrete durability under cyclic freezing and thawing conditions are analyzed, with examples of applications in bridges in the states of Minnesota, Michigan, and Alaska. The results of studies on the effectiveness of various types of admixtures and their impact on the performance characteristics of structures are presented. Opportunities for adapting the American experience in Ukraine are identified. Problem Statement. The main problem with reinforced concrete structures of transport facilities in cold regions is their insufficient resistance to freeze-thaw cycles. Water penetrating the concrete pores expands during freezing and creates internal stresses, leading to cracking, surface scaling, and gradual loss of strength. In the U.S., this issue is particularly relevant for bridges and road pavements in northern states, where the number of freeze-thaw cycles can exceed one hundred per year. The solution to this problem lies in the use of frost-resistant admixtures that reduce concrete permeability and increase its durability. Materials and Methods. To increase the frost resistance of concrete, American engineers use various types of admixtures: air-entraining agents that form micropores; mineral admixtures (fly ash, ground granulated blast-furnace slag, silica fume) that densify the structure of the cement paste; and modern nano-modified materials. Research methods include laboratory testing for freeze-thaw cycles, measuring concrete permeability, microstructure analysis, and long-term operational observations of actual transport structures. Results. Studies have shown that the use of air-entraining admixtures ensures concrete frost resistance at a level of 300–400 freeze-thaw cycles. The use of silica fume allows for a reduction in concrete permeability by 40–45%, significantly decreasing the risk of cracking. Composite admixtures (a combination of air-entraining agents with slag materials) demonstrate the highest efficiency — up to 500 cycles without loss of strength. Practical examples of bridges in Minnesota, Michigan, and Alaska confirm that such technologies extend the service life of structures by decades. Conclusions. The American experience proves that the use of frost-resistant admixtures is a key factor in ensuring the durability of transport structures in cold climates. The use of various types of admixtures allows for the adaptation of concrete mixes to specific operating conditions, reduces repair costs, and increases infrastructure reliability. For Ukraine, the implementation of similar technologies is relevant, taking into account local resources (fly ash, slag) and the improvement of the regulatory framework for controlling concrete frost resistance.
- Open Access
- 31 March 2026
- Published by The State Enterprise - The State Road Transport Research Institute - SE SRTRI in Avtoshliakhovyk Ukrayiny
- Vol. 286 (1)
WORLD EXPERIENCE IN RESEARCHING THE PRIORITIZATION OF REPAIRS AND RESTORATION OF TRANSPORT STRUCTURES
Transport structures, especially bridges, are critically important elements of the road network and infrastructure stability of the state. In the context of aging bridge stock, increasing traffic intensity, and limited funding, the issue of effective planning of repairs and restoration is becoming increasingly important. The purpose of the article is to summarize global experience in developing systems for prioritizing bridge repairs and maintenance, analyze current methodological approaches to multi-criteria ranking and budget allocation optimization, and identify directions for the development of management decision support tools. The study is based on a systematic analysis of scientific publications from recent decades, including the results of a scientometric review of 380 peer-reviewed works (1990–2025) from the Scopus and Web of Science databases. The paper considers multi-criteria decision-making methods (AHP, TOPSIS, VIKOR, COPRAS, MOORA), approaches to determining criterion weights (expert and objective methods), budget optimization models, life cycle assessment, as well as machine learning tools and structural health monitoring (SHM) systems. It has been established that modern bridge management systems have evolved from single-factor ranking to integrated models that combine multi-criteria analysis, optimization, risk assessment, and monitoring data. It has been shown that the use of MCDM / MCDA methods ensures transparency and reproducibility in priority setting, while the integration of life cycle assessment and optimization algorithms allows for the development of long-term intervention programs that take into account budget constraints and uncertainty. Effective prioritization of transport infrastructure repairs should be based on a comprehensive combination of multi-criteria models, optimization methods, life cycle analysis, and digital monitoring tools. The transition to integrated adaptive management systems creates the conditions for improving the safety, economic efficiency, and sustainability of transport infrastructure, which is particularly relevant in the context of resource constraints and increased external risks. Keywords: prioritization, road bridges, transport structures, asset management, prioritization, multi-criteria analysis, priority index, repair, maintenance, critical infrastructure, technical condition.
- 31 March 2026
- Published by The State Enterprise - The State Road Transport Research Institute - SE SRTRI in Avtoshliakhovyk Ukrayiny
- Vol. 286 (1)
Open AccessWORLD EXPERIENCE IN RESEARCHING THE PRIORITIZATION OF REPAIRS AND RESTORATION OF TRANSPORT STRUCTURES
Transport structures, especially bridges, are critically important elements of the road network and infrastructure stability of the state. In the context of aging bridge stock, increasing traffic intensity, and limited funding, the issue of effective planning of repairs and restoration is becoming increasingly important. The purpose of the article is to summarize global experience in developing systems for prioritizing bridge repairs and maintenance, analyze current methodological approaches to multi-criteria ranking and budget allocation optimization, and identify directions for the development of management decision support tools. The study is based on a systematic analysis of scientific publications from recent decades, including the results of a scientometric review of 380 peer-reviewed works (1990–2025) from the Scopus and Web of Science databases. The paper considers multi-criteria decision-making methods (AHP, TOPSIS, VIKOR, COPRAS, MOORA), approaches to determining criterion weights (expert and objective methods), budget optimization models, life cycle assessment, as well as machine learning tools and structural health monitoring (SHM) systems. It has been established that modern bridge management systems have evolved from single-factor ranking to integrated models that combine multi-criteria analysis, optimization, risk assessment, and monitoring data. It has been shown that the use of MCDM / MCDA methods ensures transparency and reproducibility in priority setting, while the integration of life cycle assessment and optimization algorithms allows for the development of long-term intervention programs that take into account budget constraints and uncertainty. Effective prioritization of transport infrastructure repairs should be based on a comprehensive combination of multi-criteria models, optimization methods, life cycle analysis, and digital monitoring tools. The transition to integrated adaptive management systems creates the conditions for improving the safety, economic efficiency, and sustainability of transport infrastructure, which is particularly relevant in the context of resource constraints and increased external risks. Keywords: prioritization, road bridges, transport structures, asset management, prioritization, multi-criteria analysis, priority index, repair, maintenance, critical infrastructure, technical condition.
- 20 December 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise
- p. 97-99
The impact of explosive loading on bridges and overpasses and the possibility of their further restoration
Військова агресія РФ проти України призвела до руйнування значної кількості транспортної інфраструктури, включаючи мости, шляхопроводи та водопропускні труби. Виникла потреба у проведенні обстежень цих споруд для оцінки можливості їх подальшого використання. Особливу увагу потребують об'єкти, пошкоджені внаслідок ракетних атак, артилерійських обстрілів, влучань протитанкових снарядів та осколкових пошкоджень під час бойових дій
- 20 December 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise
- p. 97-99
The impact of explosive loading on bridges and overpasses and the possibility of their further restoration
Військова агресія РФ проти України призвела до руйнування значної кількості транспортної інфраструктури, включаючи мости, шляхопроводи та водопропускні труби. Виникла потреба у проведенні обстежень цих споруд для оцінки можливості їх подальшого використання. Особливу увагу потребують об'єкти, пошкоджені внаслідок ракетних атак, артилерійських обстрілів, влучань протитанкових снарядів та осколкових пошкоджень під час бойових дій
- 17 May 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2024, 225-234
STUDY OF CONCRETE STRENGTH BY NON-DESTRUCTIVE AND DESTRUCTIVE METHODS
Introduction. As a result of the military aggression of the Russian Federation against Ukraine, there is an urgent need to restore damaged and destroyed structures. Depending on the material of the span structure, bridges are divided into reinforced concrete, metal, steel-reinforced concrete, stone and wooden. Reinforced concrete bridges are the most common in Ukraine. Such structures account for almost 94 % of the total number of all bridges. Even if the bridge span is made of metal beams, such structures often have a reinforced concrete overlay slab, which means that reinforced concrete is also an integral load-bearing part of the bridge that requires proper maintenance during operation and, if necessary, repair or restoration work. In order to determine the technical condition of span structures, it is first of all necessary to inspect the structure. Typically, the list of inspection activities includes testing the concrete of structures for compressive strength. Therefore, determining the physical and mechanical characteristics of concrete is an integral part of planning for major repairs, reconstruction or new construction. This paper investigates different methods for determining the concrete strength of bridge elements. The accuracy of the results of different methods in laboratory conditions is analyzed. Problem statement. The use of a particular method has its advantages and disadvantages, which, in turn, can affect the accuracy of the data obtained.
- 17 May 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2024, 225-234
STUDY OF CONCRETE STRENGTH BY NON-DESTRUCTIVE AND DESTRUCTIVE METHODS
Introduction. As a result of the military aggression of the Russian Federation against Ukraine, there is an urgent need to restore damaged and destroyed structures. Depending on the material of the span structure, bridges are divided into reinforced concrete, metal, steel-reinforced concrete, stone and wooden. Reinforced concrete bridges are the most common in Ukraine. Such structures account for almost 94 % of the total number of all bridges. Even if the bridge span is made of metal beams, such structures often have a reinforced concrete overlay slab, which means that reinforced concrete is also an integral load-bearing part of the bridge that requires proper maintenance during operation and, if necessary, repair or restoration work. In order to determine the technical condition of span structures, it is first of all necessary to inspect the structure. Typically, the list of inspection activities includes testing the concrete of structures for compressive strength. Therefore, determining the physical and mechanical characteristics of concrete is an integral part of planning for major repairs, reconstruction or new construction. This paper investigates different methods for determining the concrete strength of bridge elements. The accuracy of the results of different methods in laboratory conditions is analyzed. Problem statement. The use of a particular method has its advantages and disadvantages, which, in turn, can affect the accuracy of the data obtained.
- 25 April 2023
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2023 (27) , 168-176
INVESTIGATION OF BRIDGES DAMAGED AND DESTROYED BY EXPLOSIONS
Introduction. Conducting inspections of destroyed and damaged bridges is crucial for the process of restoring these structures as the quality and objectivity of the decisions made during the design and construction works will depend. Problem Statement. In the course of Ukraine’s confrontation with the full-scale armed offensive of the russian federation, hundreds of bridges on roads of various administrative subordination were destroyed and damaged. The legislative and regulatory framework in Ukraine did not provide an algorithm for conducting inspections and restoration of destroyed buildings and structures at the time of the introduction of martial law. Purpose. The purpose of the article is to highlight the experience of conducting inspections of destroyed and damaged bridges, as well as to highlight changes in legislation after the introduction of martial law aimed at regulating the processes of fixing, inspecting and restoring damaged and destroyed transport facilities. Results. The article presents the results of inspections of about 40 damaged and destroyed structures on the roads of national importance in the regions where military operations took place during the martial law in Ukraine. The destruction of bridge structures is affected by various factors such as the nature of the explosion, the design of supports and spans, and the static scheme of the bridge. Conclusions. The experience gained from the inspection of about 40 bridges damaged as a result of the armed invasion of Ukraine by the Russian Federation allows us to draw conclusions in two directions. First, the inspection of structures requires a professional and responsible approach from both the contractors and the balance holders (owners) in terms of formulating the inspection task and accepting the relevant technical documentation based on the inspection results. Secondly, there is a need to develop and update legal, regulatory and technical documents that would take into account the experience gained and be aimed at reducing the potential threat of bridge collapse and reducing the costs of their subsequent restoration.
- 25 April 2023
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2023 (27) , 168-176
INVESTIGATION OF BRIDGES DAMAGED AND DESTROYED BY EXPLOSIONS
Introduction. Conducting inspections of destroyed and damaged bridges is crucial for the process of restoring these structures as the quality and objectivity of the decisions made during the design and construction works will depend. Problem Statement. In the course of Ukraine’s confrontation with the full-scale armed offensive of the russian federation, hundreds of bridges on roads of various administrative subordination were destroyed and damaged. The legislative and regulatory framework in Ukraine did not provide an algorithm for conducting inspections and restoration of destroyed buildings and structures at the time of the introduction of martial law. Purpose. The purpose of the article is to highlight the experience of conducting inspections of destroyed and damaged bridges, as well as to highlight changes in legislation after the introduction of martial law aimed at regulating the processes of fixing, inspecting and restoring damaged and destroyed transport facilities. Results. The article presents the results of inspections of about 40 damaged and destroyed structures on the roads of national importance in the regions where military operations took place during the martial law in Ukraine. The destruction of bridge structures is affected by various factors such as the nature of the explosion, the design of supports and spans, and the static scheme of the bridge. Conclusions. The experience gained from the inspection of about 40 bridges damaged as a result of the armed invasion of Ukraine by the Russian Federation allows us to draw conclusions in two directions. First, the inspection of structures requires a professional and responsible approach from both the contractors and the balance holders (owners) in terms of formulating the inspection task and accepting the relevant technical documentation based on the inspection results. Secondly, there is a need to develop and update legal, regulatory and technical documents that would take into account the experience gained and be aimed at reducing the potential threat of bridge collapse and reducing the costs of their subsequent restoration.
- 1 September 2022
- Published by M.P. Shulgin State Road Research Institute State Enterprise
"Youth Are the Drivers of the Revival of the Country" Collection of scientific papers "Dorogi i Mosti" (Roads and Bridges)
The collection presents abstracts of the reports of the participants of the First All-Ukrainian Scientific Conference of Young Researchers in the Road Industry "Youth Are the Drivers of the Revival of the Country", in which the issues of modern construction materials and technologies, operational maintenance and rehabilitation of highways and bridges, inspection and testing, economics and management organization in road construction are highlighted.
- 1 September 2022
- Published by M.P. Shulgin State Road Research Institute State Enterprise
"Youth Are the Drivers of the Revival of the Country" Collection of scientific papers "Dorogi i Mosti" (Roads and Bridges)
The collection presents abstracts of the reports of the participants of the First All-Ukrainian Scientific Conference of Young Researchers in the Road Industry "Youth Are the Drivers of the Revival of the Country", in which the issues of modern construction materials and technologies, operational maintenance and rehabilitation of highways and bridges, inspection and testing, economics and management organization in road construction are highlighted.
- 4 December 2018
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- No. 18,p. 54-69
The experience of implementation of the analytical expert bridges management system
- 4 December 2018
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- No. 18,p. 54-69
The experience of implementation of the analytical expert bridges management system