Bohdan Zelenskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bohdan Zelenskyi has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Maksym Borysenko
State Enterprise «National Institute for Development Іnfrastructure» (SE «NIDI»), Kyiv, Ukraine
3 shared publications - Serhii Zavhorodnii
State Enterprise «National Institute for Development Infrastructure» (SE «NIDI»), Kyiv, Ukraine
3 shared publications - Olena Slavinska
National Transport University
2 shared publications - Olena Usychenko
National Transport University
2 shared publications - Pavlo Stashuk
State Enterprise «National Institute for Development Infrastructure» (SE «NIDI»), Kyiv, Ukraine
2 shared publications - Inessa Rutkovska
National Transport University
1 shared publication
Latest Publications
- 23 October 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (34) , 103-114
Practical aspects of chloride effects on reinforced concrete transportation structures
Chloride-induced reinforcement corrosion is a major cause of premature deterioration of reinforced concrete bridge elements exposed to cyclic wetting and de-icing agents. Visual inspection mainly records the propagation stage, whereas water-soluble chloride testing can identify hazardous conditions before widespread cracking and spalling. Chloride content, however, cannot by itself define the operational condition without considering reinforcement depth, moisture, cracking and electrochemical evidence. To generalize field measurements of water-soluble chlorides in six transportation structures in Kyiv, evaluate spatial variability and develop a practical diagnostic workflow. The study covered a bridge over the Lybid River and five overpasses near Poliarna Street, Portova Street and the Osokorky, Nyvky and Chernihivska metro stations. Visual inspection, core or local sampling, layer preparation and silver nitrate titration were used. After removing duplicate and missing records, 103 determinations expressed as percent of estimated cement mass were analyzed. Water-soluble chloride content ranged from 0.01 to 2.00 %, with a median of 0.55 %. Under the adopted limits for non-prestressed reinforcement, 23 results fell within the common range for conditions 1–3, 36 within condition 4, and 44 within condition 5; the corresponding counts for prestressed reinforcement were 19, 13, and 71. Thirty paired surface/deeper measurements confirmed a non-uniform chloride profile. Results should be interpreted using assessment levels corresponding to operational conditions 1–5, with separate limits for prestressed and non-prestressed reinforcement and samples taken at two levels. Chloride content alone does not distinguish conditions 1–3; the final condition requires visual, electrochemical, and structural evidence.
- 23 October 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (34) , 103-114
Practical aspects of chloride effects on reinforced concrete transportation structures
Chloride-induced reinforcement corrosion is a major cause of premature deterioration of reinforced concrete bridge elements exposed to cyclic wetting and de-icing agents. Visual inspection mainly records the propagation stage, whereas water-soluble chloride testing can identify hazardous conditions before widespread cracking and spalling. Chloride content, however, cannot by itself define the operational condition without considering reinforcement depth, moisture, cracking and electrochemical evidence. To generalize field measurements of water-soluble chlorides in six transportation structures in Kyiv, evaluate spatial variability and develop a practical diagnostic workflow. The study covered a bridge over the Lybid River and five overpasses near Poliarna Street, Portova Street and the Osokorky, Nyvky and Chernihivska metro stations. Visual inspection, core or local sampling, layer preparation and silver nitrate titration were used. After removing duplicate and missing records, 103 determinations expressed as percent of estimated cement mass were analyzed. Water-soluble chloride content ranged from 0.01 to 2.00 %, with a median of 0.55 %. Under the adopted limits for non-prestressed reinforcement, 23 results fell within the common range for conditions 1–3, 36 within condition 4, and 44 within condition 5; the corresponding counts for prestressed reinforcement were 19, 13, and 71. Thirty paired surface/deeper measurements confirmed a non-uniform chloride profile. Results should be interpreted using assessment levels corresponding to operational conditions 1–5, with separate limits for prestressed and non-prestressed reinforcement and samples taken at two levels. Chloride content alone does not distinguish conditions 1–3; the final condition requires visual, electrochemical, and structural evidence.
- 7 April 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (33) , 178-189
The oretical aspects of chloride effects on reinforced concrete transportation structures
Introduction. The article considers the fundamental problem of ensuring the durability of highway bridges under aggressive chloride action. The operational reliability of transport structures is largely determined by the condition of reinforced concrete structures exposed to de-icing agents and cyclic wetting. Problem Statement. Chloride-induced corrosion of reinforcement is one of the most dangerous degradation factors, leading to a loss of load-bearing capacity and premature failure of bridges. The existing regulatory framework of Ukraine only partially accounts for these processes, necessitating harmonization with international standards. Objective. The objective of this work is to systematize theoretical knowledge regarding chloride mass transport mechanisms, analyze the influence of mineral admixtures and carbonation on corrosion resistance, and review modern regulatory methods for determining chloride content to improve the national bridge monitoring system. Materials and Methods. Methods of analytical review of scientific literature and regulatory documents regarding diffusion processes, thermodynamic modeling of chloride binding, and probabilistic risk assessment methods were used. Results. The differences between free and bound forms of chlorides are analyzed, and the effect of carbonation on the release of bound salts is examined. Regulatory methodologies for determining water- and acid-soluble chlorides, their advantages, and limitations are described in detail. The necessity of transitioning from deterministic threshold values to probabilistic models of corrosion risk assessment is substantiated. Conclusions. The results demonstrate effective durability prediction of transport structures requires differentiated consideration of free and bound chlorides, especially for concretes with mineral admixtures and under carbonation conditions. The feasibility of implementing ASTM C876 and AASHTO T 260 methodologies into domestic bridge monitoring practice is substantiated. The proposed approach allows for the identification of corrosion processes at the initiation stage, which is a prerequisite for introducing asset management systems based on actual technical condition.
- 7 April 2026
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2026 (33) , 178-189
The oretical aspects of chloride effects on reinforced concrete transportation structures
Introduction. The article considers the fundamental problem of ensuring the durability of highway bridges under aggressive chloride action. The operational reliability of transport structures is largely determined by the condition of reinforced concrete structures exposed to de-icing agents and cyclic wetting. Problem Statement. Chloride-induced corrosion of reinforcement is one of the most dangerous degradation factors, leading to a loss of load-bearing capacity and premature failure of bridges. The existing regulatory framework of Ukraine only partially accounts for these processes, necessitating harmonization with international standards. Objective. The objective of this work is to systematize theoretical knowledge regarding chloride mass transport mechanisms, analyze the influence of mineral admixtures and carbonation on corrosion resistance, and review modern regulatory methods for determining chloride content to improve the national bridge monitoring system. Materials and Methods. Methods of analytical review of scientific literature and regulatory documents regarding diffusion processes, thermodynamic modeling of chloride binding, and probabilistic risk assessment methods were used. Results. The differences between free and bound forms of chlorides are analyzed, and the effect of carbonation on the release of bound salts is examined. Regulatory methodologies for determining water- and acid-soluble chlorides, their advantages, and limitations are described in detail. The necessity of transitioning from deterministic threshold values to probabilistic models of corrosion risk assessment is substantiated. Conclusions. The results demonstrate effective durability prediction of transport structures requires differentiated consideration of free and bound chlorides, especially for concretes with mineral admixtures and under carbonation conditions. The feasibility of implementing ASTM C876 and AASHTO T 260 methodologies into domestic bridge monitoring practice is substantiated. The proposed approach allows for the identification of corrosion processes at the initiation stage, which is a prerequisite for introducing asset management systems based on actual technical condition.
- 9 October 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2024 (30) , 283-297
Method of physical and functional wear assessment in determining the quality condition of road bridges
Introduction. Assessment of the qualitative condition of road bridges is a complex process that involves the analysis of physical and functional deterioration of structures. Physical deterioration is associated with deterioration of materials and loss of strength of elements, while functional deterioration is manifested in a decrease in the bearing capacity and deformability of the bridge. Problems. To determine the level of wear, a comprehensive method is used, including visual inspection, calculation estimates and experimental studies. In addition, a differentiated method is used, which allows comparing actual values with design values and drawing conclusions about the quality of individual elements and the structure as a whole. Objective. The expert method is an important addition to other methods of assessing the technical condition of bridges.
- 9 October 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2024 (30) , 283-297
Method of physical and functional wear assessment in determining the quality condition of road bridges
Introduction. Assessment of the qualitative condition of road bridges is a complex process that involves the analysis of physical and functional deterioration of structures. Physical deterioration is associated with deterioration of materials and loss of strength of elements, while functional deterioration is manifested in a decrease in the bearing capacity and deformability of the bridge. Problems. To determine the level of wear, a comprehensive method is used, including visual inspection, calculation estimates and experimental studies. In addition, a differentiated method is used, which allows comparing actual values with design values and drawing conclusions about the quality of individual elements and the structure as a whole. Objective. The expert method is an important addition to other methods of assessing the technical condition of bridges.
- Open Access
- 26 May 2024
- Published by RS Global Sp. z O.O. in World Science
- No. 2(84)
THE METHODS OF THE SORBED QUANTITY OF THE DIFFUSION COEFFICIENTS AND POLYMERS LIQUID AREAS
The article presents the application of a method for assessing the qualitative state of bridges based on the use of qualimetry methods. The proposed approach considers a wide range of parameters that affect the functioning and reliability of road bridges. The method involves the use of a qualimetric model that allows systematizing and structuring of information about the physical condition of individual bridge elements and functional indicators. The weighting of the parameters was determined using expert and estimated methods, which increased the accuracy and objectivity of the assessment. The development of a qualitative condition model includes the following stages: identification of bridge elements, determination of assessment parameters, development of a qualimetric model, determination of weighting coefficients for each criterion, analysis of the results of a specific object inspection, and determination of the overall operational condition of the bridge. The results of the study show that the proposed methodology can be effectively used to assess the condition of bridges, providing a sufficiently high accuracy and completeness of the assessment. This contributes to improving the safety and reliability of bridge structures, reducing accidents and optimizing their maintenance costs. The proposed assessment method has prospects for implementation in the practice of bridge condition management and can be further applied in the system of monitoring the condition of transport facilities.
- 26 May 2024
- Published by RS Global Sp. z O.O. in World Science
- No. 2(84)
Open AccessTHE METHODS OF THE SORBED QUANTITY OF THE DIFFUSION COEFFICIENTS AND POLYMERS LIQUID AREAS
The article presents the application of a method for assessing the qualitative state of bridges based on the use of qualimetry methods. The proposed approach considers a wide range of parameters that affect the functioning and reliability of road bridges. The method involves the use of a qualimetric model that allows systematizing and structuring of information about the physical condition of individual bridge elements and functional indicators. The weighting of the parameters was determined using expert and estimated methods, which increased the accuracy and objectivity of the assessment. The development of a qualitative condition model includes the following stages: identification of bridge elements, determination of assessment parameters, development of a qualimetric model, determination of weighting coefficients for each criterion, analysis of the results of a specific object inspection, and determination of the overall operational condition of the bridge. The results of the study show that the proposed methodology can be effectively used to assess the condition of bridges, providing a sufficiently high accuracy and completeness of the assessment. This contributes to improving the safety and reliability of bridge structures, reducing accidents and optimizing their maintenance costs. The proposed assessment method has prospects for implementation in the practice of bridge condition management and can be further applied in the system of monitoring the condition of transport facilities.
- 17 May 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2024, 225-234
STUDY OF CONCRETE STRENGTH BY NON-DESTRUCTIVE AND DESTRUCTIVE METHODS
Introduction. As a result of the military aggression of the Russian Federation against Ukraine, there is an urgent need to restore damaged and destroyed structures. Depending on the material of the span structure, bridges are divided into reinforced concrete, metal, steel-reinforced concrete, stone and wooden. Reinforced concrete bridges are the most common in Ukraine. Such structures account for almost 94 % of the total number of all bridges. Even if the bridge span is made of metal beams, such structures often have a reinforced concrete overlay slab, which means that reinforced concrete is also an integral load-bearing part of the bridge that requires proper maintenance during operation and, if necessary, repair or restoration work. In order to determine the technical condition of span structures, it is first of all necessary to inspect the structure. Typically, the list of inspection activities includes testing the concrete of structures for compressive strength. Therefore, determining the physical and mechanical characteristics of concrete is an integral part of planning for major repairs, reconstruction or new construction. This paper investigates different methods for determining the concrete strength of bridge elements. The accuracy of the results of different methods in laboratory conditions is analyzed. Problem statement. The use of a particular method has its advantages and disadvantages, which, in turn, can affect the accuracy of the data obtained.
- 17 May 2024
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2024, 225-234
STUDY OF CONCRETE STRENGTH BY NON-DESTRUCTIVE AND DESTRUCTIVE METHODS
Introduction. As a result of the military aggression of the Russian Federation against Ukraine, there is an urgent need to restore damaged and destroyed structures. Depending on the material of the span structure, bridges are divided into reinforced concrete, metal, steel-reinforced concrete, stone and wooden. Reinforced concrete bridges are the most common in Ukraine. Such structures account for almost 94 % of the total number of all bridges. Even if the bridge span is made of metal beams, such structures often have a reinforced concrete overlay slab, which means that reinforced concrete is also an integral load-bearing part of the bridge that requires proper maintenance during operation and, if necessary, repair or restoration work. In order to determine the technical condition of span structures, it is first of all necessary to inspect the structure. Typically, the list of inspection activities includes testing the concrete of structures for compressive strength. Therefore, determining the physical and mechanical characteristics of concrete is an integral part of planning for major repairs, reconstruction or new construction. This paper investigates different methods for determining the concrete strength of bridge elements. The accuracy of the results of different methods in laboratory conditions is analyzed. Problem statement. The use of a particular method has its advantages and disadvantages, which, in turn, can affect the accuracy of the data obtained.
- 1 January 2024
- Published by National Transport University in Automobile Roads and Road Construction
- No. 115.1
STUDY OF THE STRUCTURAL FEATURES OF STRING-CONCRETE SPAN STRUCTURES
Summary. The analysis of inspection results and experience in the operation of transport facilities show that bridges with string-concrete girders according to the standard designs VTP-16 and VTP-15 are in the worst condition. The wire prestressing reinforcement of these beams, which has a small diameter of 3 mm or 5 mm, loses its cross-section over time and breaks due to corrosion. This leads to the exhaustion of the residual service life of string-concrete girders on many bridges, which has caused several collapses in Ukraine in recent years. The structural features of string-concrete girders, including the use of small-diameter prestressed wire reinforcement, play a key role in their long-term operation and reliability. The number of such structures on Ukrainian roads of national importance reaches about 500 units, and their service life is more than 60 years. Lack of proper maintenance can lead to serious economic and safety problems. Analysing the technical condition of bridge span elements and identifying defects helps to improve traffic safety, extend the service life of bridges and reduce overall costs. Effective repair and strengthening of bridge structures ensure the normal functioning of the transport infrastructure, which is critical for the economic development and security of the country. This article investigates various aspects of the operation of bridges with string-concrete girders. The causes of defects are analysed and proposals are made to temporarily preserve the stability of structures prior to major repairs or reconstruction. The structural features of bridges with string-concrete girders reveal significant shortcomings that eventually lead to serious problems. Small-diameter wire prestressing reinforcement is prone to corrosion, which reduces its cross-section and leads to rupture. This, in turn, can lead to a complete collapse of the bridge span. Keywords: bridge, span structure, string-concrete, technical condition, defects, recommendations.
- 1 January 2024
- Published by National Transport University in Automobile Roads and Road Construction
- No. 115.1
STUDY OF THE STRUCTURAL FEATURES OF STRING-CONCRETE SPAN STRUCTURES
Summary. The analysis of inspection results and experience in the operation of transport facilities show that bridges with string-concrete girders according to the standard designs VTP-16 and VTP-15 are in the worst condition. The wire prestressing reinforcement of these beams, which has a small diameter of 3 mm or 5 mm, loses its cross-section over time and breaks due to corrosion. This leads to the exhaustion of the residual service life of string-concrete girders on many bridges, which has caused several collapses in Ukraine in recent years. The structural features of string-concrete girders, including the use of small-diameter prestressed wire reinforcement, play a key role in their long-term operation and reliability. The number of such structures on Ukrainian roads of national importance reaches about 500 units, and their service life is more than 60 years. Lack of proper maintenance can lead to serious economic and safety problems. Analysing the technical condition of bridge span elements and identifying defects helps to improve traffic safety, extend the service life of bridges and reduce overall costs. Effective repair and strengthening of bridge structures ensure the normal functioning of the transport infrastructure, which is critical for the economic development and security of the country. This article investigates various aspects of the operation of bridges with string-concrete girders. The causes of defects are analysed and proposals are made to temporarily preserve the stability of structures prior to major repairs or reconstruction. The structural features of bridges with string-concrete girders reveal significant shortcomings that eventually lead to serious problems. Small-diameter wire prestressing reinforcement is prone to corrosion, which reduces its cross-section and leads to rupture. This, in turn, can lead to a complete collapse of the bridge span. Keywords: bridge, span structure, string-concrete, technical condition, defects, recommendations.
- 14 December 2023
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2023 (28) , 195-202
APPLICATION OF ARTIFICIAL INTELLIGENCE FOR MONITORING THE TECHNICAL CONDITION OF BRIDGES: ADVANTAGES AND PROSPECTS
Introduction. This article explores the use of artificial intelligence (AI) to monitor the technical condition of bridges and predict the service life of structures. It outlines the relevance of this issue, analyzes recent research and publications, defines the purpose and objectives of the study, and describes the main material, results, conclusions, and prospects for further research. Problem Statement. Monitoring the technical condition of bridges and predicting their service life requires a lot of time to process the results of the survey and determine the actual technical condition of the bridge elements. Purpose. To analyze the possibility of using artificial intelligence to monitor the technical condition of bridges and predict their service life. To establish the reliability of the data obtained in comparison with traditional methods of assessing the technical condition. Materials and methods. To analyze the possibility of using artificial intelligence to monitor the technical condition of bridges, we use available resources and databases on the Internet. State standards and regulations in force in Ukraine are used as initial data for the assessment.
- 14 December 2023
- Published by M.P. Shulgin State Road Research Institute State Enterprise in Dorogi i Mosti
- Vol. 2023 (28) , 195-202
APPLICATION OF ARTIFICIAL INTELLIGENCE FOR MONITORING THE TECHNICAL CONDITION OF BRIDGES: ADVANTAGES AND PROSPECTS
Introduction. This article explores the use of artificial intelligence (AI) to monitor the technical condition of bridges and predict the service life of structures. It outlines the relevance of this issue, analyzes recent research and publications, defines the purpose and objectives of the study, and describes the main material, results, conclusions, and prospects for further research. Problem Statement. Monitoring the technical condition of bridges and predicting their service life requires a lot of time to process the results of the survey and determine the actual technical condition of the bridge elements. Purpose. To analyze the possibility of using artificial intelligence to monitor the technical condition of bridges and predict their service life. To establish the reliability of the data obtained in comparison with traditional methods of assessing the technical condition. Materials and methods. To analyze the possibility of using artificial intelligence to monitor the technical condition of bridges, we use available resources and databases on the Internet. State standards and regulations in force in Ukraine are used as initial data for the assessment.