Nicholas E. Wierschem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Nicholas E. Wierschem has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Alexander F. Vakakis
University of Illinois at Urbana-Champaign
3 shared publications - Jie Luo
Univ. of Illinois at Urbana-Champaign
3 shared publications - Larry A. Fahnestock
Univ. of Illinois Urbana-Champaign
3 shared publications - Lawrence A. Bergman
University of Illinois at Urbana–Champaign, Urbana, Illinois 61801
3 shared publications - Billie F. Spencer
Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA
2 shared publications - Donald Michael McFarland
Ningbo Institute of Digital Twin, Eastern Institute of Technology, 568 Tongxin Road, Ningbo 315200, P. R. China
2 shared publications
Latest Publications
- 1 June 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 140 (6)
Experimental Testing and Numerical Simulation of a Six-Story Structure Incorporating Two-Degree-of-Freedom Nonlinear Energy Sink
The nonlinear energy sink (NES) is a fully passive attachment used to rapidly dissipate a significant portion of energy induced in a linear primary structure to which it is attached. In this study, the performance of a Type III NES in reducing the response of a large primary structure when subjected to a shock-type loading is evaluated experimentally. The Type III NES is a two-degree-of-freedom device comprising two relatively lightweight masses in series coupled together and to the primary structure through essentially nonlinear (i.e., nonlinearizable) stiffness elements. The essential stiffness nonlinearity of the NES and the corresponding lack of preferential resonance frequencies enable it to resonantly interact with multiple structural modes over broad frequency and energy ranges. Hence a local NES can induce global effects in the dynamics of the structure to which it is attached. In this study, and for the first time, specially shaped polyurethane bumpers are employed for realizing these essentially nonlinear stiffness elements of the Type III NES. Measures calculated from the experiments in this study, such as the effective damping of the primary structure, indicate the ability of the NES to dissipate energy and reduce the response of the primary structure over a wide range of magnitudes of a shock loading. Good agreement between numerical predictions and experimental observations validates the identified model of the NES.
- 1 June 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 140 (6)
Experimental Testing and Numerical Simulation of a Six-Story Structure Incorporating Two-Degree-of-Freedom Nonlinear Energy Sink
The nonlinear energy sink (NES) is a fully passive attachment used to rapidly dissipate a significant portion of energy induced in a linear primary structure to which it is attached. In this study, the performance of a Type III NES in reducing the response of a large primary structure when subjected to a shock-type loading is evaluated experimentally. The Type III NES is a two-degree-of-freedom device comprising two relatively lightweight masses in series coupled together and to the primary structure through essentially nonlinear (i.e., nonlinearizable) stiffness elements. The essential stiffness nonlinearity of the NES and the corresponding lack of preferential resonance frequencies enable it to resonantly interact with multiple structural modes over broad frequency and energy ranges. Hence a local NES can induce global effects in the dynamics of the structure to which it is attached. In this study, and for the first time, specially shaped polyurethane bumpers are employed for realizing these essentially nonlinear stiffness elements of the Type III NES. Measures calculated from the experiments in this study, such as the effective damping of the primary structure, indicate the ability of the NES to dissipate energy and reduce the response of the primary structure over a wide range of magnitudes of a shock loading. Good agreement between numerical predictions and experimental observations validates the identified model of the NES.
- 1 May 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 140 (5)
Realization of a Strongly Nonlinear Vibration-Mitigation Device Using Elastomeric Bumpers
Recent research has shown the viability of using nonlinear energy-sink (NES) devices for vibration mitigation in mechanical and structural systems. When attached to a primary structure, these lightweight passive devices can effectively reduce the structural vibration response through their nonlinear stiffness properties. In this research, a two-degree-of-freedom NES device is designed using innovative elastomeric bumpers as the critical components providing nonlinear restoring forces. A number of elastomeric bumper configurations are evaluated experimentally, and the effect of geometric bumper parameters is investigated with a focus on their influence on the stiffness properties of the bumper. A NES device employing different bumpers is then implemented on a 6-story model building and tested using impulse-like base motion. Nonlinear system identification of the NES device shows that nonlinear stiffness properties are achieved using the elastomeric bumpers. Shake-table testing of the building equipped with the NES device demonstrates that the device is capable of dissipating and redistributing the induced vibration energy in a rapid, effective, and robust fashion.
- 1 May 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 140 (5)
Realization of a Strongly Nonlinear Vibration-Mitigation Device Using Elastomeric Bumpers
Recent research has shown the viability of using nonlinear energy-sink (NES) devices for vibration mitigation in mechanical and structural systems. When attached to a primary structure, these lightweight passive devices can effectively reduce the structural vibration response through their nonlinear stiffness properties. In this research, a two-degree-of-freedom NES device is designed using innovative elastomeric bumpers as the critical components providing nonlinear restoring forces. A number of elastomeric bumper configurations are evaluated experimentally, and the effect of geometric bumper parameters is investigated with a focus on their influence on the stiffness properties of the bumper. A NES device employing different bumpers is then implemented on a 6-story model building and tested using impulse-like base motion. Nonlinear system identification of the NES device shows that nonlinear stiffness properties are achieved using the elastomeric bumpers. Shake-table testing of the building equipped with the NES device demonstrates that the device is capable of dissipating and redistributing the induced vibration energy in a rapid, effective, and robust fashion.
- 30 April 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 2241-2252
Experimental Testing of a Large 9-Story Structure Equipped with Multiple Nonlinear Energy Sinks Subjected to an Impulsive Loading
Building structures can be critically affected by impulsive loads such as blasts, collisions, gusts, and pulse-dominated earthquakes. The addition of nonlinear energy sinks (NESs) in buildings has been proposed as a means to rapidly and passively dissipate the energy in a system exposed to this type of loading. This rapid dissipation occurs because the essential nonlinearity of the NES allows it to resonate with any mode of the structure and engage in targeted energy transfer, the nearly one-way transfer of energy to the NES where it is locally dissipated. Additionally, the NES couples the modes of the structure and facilitates the transfer of energy from the lower modes of the structure to the higher modes, where it can be dissipated at a reduced time scale. In this study the experimental performance of a system of multiple NESs in a large 9-story test structure is discussed. Two different types of NESs are used, each of which employ a different type of restoring force; one type of NES utilizes a smooth restoring force that is roughly cubic, while the other utilizes a linear restoring force coupled with one-sided vibro-impacts. To load this system, an impulse-like ground motion is applied via a large shake table. The results of this study show that the system of NESs greatly improves the performance of the structure across a wide range of impulse amplitudes by reducing and very rapidly attenuating its response.
- 30 April 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 2241-2252
Experimental Testing of a Large 9-Story Structure Equipped with Multiple Nonlinear Energy Sinks Subjected to an Impulsive Loading
Building structures can be critically affected by impulsive loads such as blasts, collisions, gusts, and pulse-dominated earthquakes. The addition of nonlinear energy sinks (NESs) in buildings has been proposed as a means to rapidly and passively dissipate the energy in a system exposed to this type of loading. This rapid dissipation occurs because the essential nonlinearity of the NES allows it to resonate with any mode of the structure and engage in targeted energy transfer, the nearly one-way transfer of energy to the NES where it is locally dissipated. Additionally, the NES couples the modes of the structure and facilitates the transfer of energy from the lower modes of the structure to the higher modes, where it can be dissipated at a reduced time scale. In this study the experimental performance of a system of multiple NESs in a large 9-story test structure is discussed. Two different types of NESs are used, each of which employ a different type of restoring force; one type of NES utilizes a smooth restoring force that is roughly cubic, while the other utilizes a linear restoring force coupled with one-sided vibro-impacts. To load this system, an impulse-like ground motion is applied via a large shake table. The results of this study show that the system of NESs greatly improves the performance of the structure across a wide range of impulse amplitudes by reducing and very rapidly attenuating its response.