CMCodi D. McKee

Codi D. McKee

*This is an algorithmically generated author record based on publicly available information.

Codi D. McKee has a total of 8 co-authors. Here are the top co-authors by number of shared publications:

  • Anna C. Birely

    Assistant Professor, Zachry Dept. of Civil Engineering, Texas A&M Univ., 3136 TAMU, College Station, TX 77843. ORCID:

    3 shared publications
  • John B. Mander

    Zachry Professor in Design and Construction Integration I, Zachry Dept. of Civil Engineering, Texas A&M Univ., 3136 TAMU, College Station, TX 77843

    3 shared publications
  • Ju Dong Lee

    Postdoctoral Research Associate, Roadside Safety and Physical Security Division, Texas A&M Transportation Institute, 3135 TAMU, College Station, TX 77843. ORCID:

    2 shared publications
  • Ju Dong Lee

    Graduate Assistant Researcher, Zachry Dept. of Civil Engineering, Texas A&M Univ., 3136 TAMU, College Station, TX 77843

    1 shared publication
  • Kevin J. Yole

    Formerly, Graduate Assistant Researcher, Zachry Dept. of Civil Engineering, Texas A&M Univ., 3136 TAMU, College Station, TX 77843

    1 shared publication
  • Mija Helena Hubler

    University of Colorado Boulder

    1 shared publication

Latest Publications

  • Experimental Behavior of Reinforced Concrete and Pretensioned Concrete Bent Caps

    by Anna C. Birely, Kevin J. Yole, Ju Dong Lee, Codi D. McKee, John B. Mander

    Accelerated bridge construction using precast bridge substructures can enable reduction of traffic disruption, increased worker safety, and increased quality through controlled conditions at the time of fabrication. A largely unrealized benefit of precast substructures is the use of pretensioned bent caps that can provide superior performance to that of reinforced concrete bent caps. Full-scale experimental tests of reinforced concrete (RC) and pretensioned, prestressed concrete (PSC) bent cap subassemblies were conducted to verify the improved performance of pretensioned caps. Flexural reinforcing bars and strands were distributed along the sides of the bent cap to accommodate a pocket connection designed to provide large construction tolerances. Results showed superior performance of the pretensioned cap, including delayed initial cracking, smaller average flexure crack widths, and absence of shear cracking. Removal of live loads resulted in full closure of cracks, validating the design philosophy of zero tension under dead load.


  • Experimental Behavior of Pretensioned Bent Caps with Internal Voids for Weight Reduction

    by Codi D. McKee, Ju Dong Lee, Anna C. Birely, John B. Mander

    Precast bent caps offer the opportunity to reduce onsite labor and materials and to accelerate the speed of construction. For many bridges, the weight is manageable for shipping and placement without the need for large cranes. For large bent caps, the weight can become a significant challenge for construction. Internal voids can be effective in reducing the weight but introduce the potential for the formation of shear cracks at service loads, because the shear width is smaller than in a solid bent cap. Internal voids are an attractive option when bent caps are pretensioned, because pretensioning delays the formation of cracks. This paper presents the results of a full-scale experimental test program that investigated the progression of damage and the failure mechanisms of pretensioned bent caps with internal voids. Test specimens were subassemblies of a portion of a multicolumn bent that included an overhang, a negative bending region at the connection to a column, and a positive bending region. The variables investigated were the presence of a void, the amount of prestressing, and the void termination location. Results indicated that voided caps had similar flexural behavior to solid caps, but were more prone to shear cracking and had more brittle failures. The use of a higher prestressing force was found to significantly delay flexural cracking but to have a minor effect on delaying the formation of shear cracks. The location of void termination adjacent to the connection region influenced the extent of the damage at failure.


  • Recommendations for Design of Concentrically Pretensioned, Precast Concrete Bent Caps

    by Ju Dong Lee, Usha R. Barooah, Codi D. McKee, Anna C. Birely, John B. Mander

    Precast, prestressed bent caps are an attractive design option because they permit accelerated bridge construction and can extend the service life of bridges by reducing or eliminating the service-level cracking observed in RC bent caps. A design procedure is recommended for the flexural design of pretensioned bent caps in which the amount of prestressing is selected to ensure zero tension at service, with service- and strength-limit states serving as checks on the design. Recommendations include how to account for openings for connections that may influence the bent cap performance. Using the recommended flexural design procedure and AASHTO shear design provisions, pretensioned bent caps were designed for a suite of multicolumn bridges. The flexural design procedure is shown to be efficient for the design of most bridges, and many bent caps are expected to have only minor cracking, if any, at ultimate demands. The minimum area of transverse reinforcement was found to govern most bridge designs, leading to recommendations to use the general, noniterative sectional shear design method. The resulting designs lead to recommendations for how designers and contractors can use precast, pretensioned bent caps not only to enable accelerated construction and extend bridge service life but also to increase design and construction efficiency.