Giovanni Scarlato
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Giovanni Scarlato has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
John R. Long
RF/MMIC Group, Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON, Canada
2 shared publications- Ahmed Ben Ayed
Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON, Canada
1 shared publication - Eric Ng
Anokiwave Inc., Billerica, MA, USA
1 shared publication John R Long
Department of ECE, RF/MMIC Group, University of Waterloo
1 shared publication- Patrick Mitran
Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, Canada
1 shared publication - Slim Boumaiza
University of Waterloo
1 shared publication
Latest Publications
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 9, 65-68
A 70-GHz Bandwidth Amplifier With Integrated Differential Bridged T-coil Peaking and Uniform Group Delay
A two-stage amplifier in 22-nm FD-SOI CMOS integrates a fully-differential bridged T-coil for the first time. Circuit performance is benchmarked against an identical amplifier topology designed with single-ended T-coils (pseudo-differential) and an unpeaked reference. It realizes 70-GHz bandwidth with $12~\pm ~2$ -ps group delay and >10-dB return loss across 90 GHz. Bandwidth is 2.2x greater than the unpeaked reference circuit and is 58% larger than a pseudo-differential equivalent. The 54 x $56~\mu $ m2 differential T-coil occupies one-third the area of two single-ended coils.
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 9, 65-68
A 70-GHz Bandwidth Amplifier With Integrated Differential Bridged T-coil Peaking and Uniform Group Delay
A two-stage amplifier in 22-nm FD-SOI CMOS integrates a fully-differential bridged T-coil for the first time. Circuit performance is benchmarked against an identical amplifier topology designed with single-ended T-coils (pseudo-differential) and an unpeaked reference. It realizes 70-GHz bandwidth with $12~\pm ~2$ -ps group delay and >10-dB return loss across 90 GHz. Bandwidth is 2.2x greater than the unpeaked reference circuit and is 58% larger than a pseudo-differential equivalent. The 54 x $56~\mu $ m2 differential T-coil occupies one-third the area of two single-ended coils.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (10) , 1158-1161
A Monolithic Differential Bridged T-Coil
Two-pole and three-pole fully differential bridged T-coils applicable to wideband and high-speed integrated circuits are described. T-coil prototypes designed for maximally flat amplitude (MFA) and envelope delay (MFED) responses are characterized. Measured transimpedance bandwidth and group delay of the two-pole MFA design are 43.2 GHz and 7 ${\pm}$ 2 ps, respectively, across 45 GHz. The three-pole MFED design exhibits 23-GHz bandwidth and 12 ${\pm}$ 2-ps group delay across 30 GHz. The bandwidth extension ratio (BWER) compared to each respective unpeaked R–C circuit is 2.43 $\times$ (MFA) and 2.2 $\times$ (MFED). Implemented in 22-nm FD-SOI CMOS technology, the T-coil prototypes occupy a chip area of $224$ $\times$ $215~{\mu{\text{m}}^2}$ .
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 34 (10) , 1158-1161
A Monolithic Differential Bridged T-Coil
Two-pole and three-pole fully differential bridged T-coils applicable to wideband and high-speed integrated circuits are described. T-coil prototypes designed for maximally flat amplitude (MFA) and envelope delay (MFED) responses are characterized. Measured transimpedance bandwidth and group delay of the two-pole MFA design are 43.2 GHz and 7 ${\pm}$ 2 ps, respectively, across 45 GHz. The three-pole MFED design exhibits 23-GHz bandwidth and 12 ${\pm}$ 2-ps group delay across 30 GHz. The bandwidth extension ratio (BWER) compared to each respective unpeaked R–C circuit is 2.43 $\times$ (MFA) and 2.2 $\times$ (MFED). Implemented in 22-nm FD-SOI CMOS technology, the T-coil prototypes occupy a chip area of $224$ $\times$ $215~{\mu{\text{m}}^2}$ .
- Open Access
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
A Monolithic Differential Bridged T-coil
Design and verification of two-and three-pole differential bridged T-coils applicable to wideband and high-speed integrated circuits, broadband I/O terminations, capacitive loads, and ESD protection circuits are described. T-coil prototypes with 50-Ω terminations, designed for maximally flat amplitude (MFA) and envelope delay (MFED) responses, are characterized. Measured transimpedance bandwidth and group delay of the two-pole MFA design are 43.2GHz and 7±2ps across 45GHz, respectively. The bandwidth extension ratio (BWER) is 2.43x compared to an unpeaked R-C circuit. The three-pole MFED T-coil realizes a 2.2x BWER, with 23-GHz bandwidth and 12±2-ps group delay across 30GHz. Implemented in 22-nm FD-SOI CMOS technology, the T-coils occupy 224 x 215µm^2 .
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessA Monolithic Differential Bridged T-coil
Design and verification of two-and three-pole differential bridged T-coils applicable to wideband and high-speed integrated circuits, broadband I/O terminations, capacitive loads, and ESD protection circuits are described. T-coil prototypes with 50-Ω terminations, designed for maximally flat amplitude (MFA) and envelope delay (MFED) responses, are characterized. Measured transimpedance bandwidth and group delay of the two-pole MFA design are 43.2GHz and 7±2ps across 45GHz, respectively. The bandwidth extension ratio (BWER) is 2.43x compared to an unpeaked R-C circuit. The three-pole MFED T-coil realizes a 2.2x BWER, with 23-GHz bandwidth and 12±2-ps group delay across 30GHz. Implemented in 22-nm FD-SOI CMOS technology, the T-coils occupy 224 x 215µm^2 .
- 16 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (11) , 4479-4492
Digital Predistortion of Millimeter-Wave RF Beamforming Arrays Using Low Number of Steering Angle-Dependent Coefficient Sets
This paper proposes a single-input single-output (SISO) digital predistortion (DPD) model for linearizing millimeter-wave (mm-wave) RF beamforming arrays. It starts with a dual-input power amplifier (PA) model that accounts for steering angle-dependent load modulation effects. This dual-input model is then transformed into a SISO model under the assumption of weak PA nonlinearity and RF beamforming architecture. The underlying coefficients of the SISO array model incorporate the beamforming weights, antenna cross-coupling, channel coefficients, and any possible phase-shifter gain variation with phase shift setting. An over-the-air (OTA) measurement setup is finally developed to validate the capacity of a SISO DPD model to linearize two different arrays-under-test with 4 and 64 elements and radiating mm-wave modulated signals with 320- and 800-MHz bandwidth. Although, in principle, the DPD coefficients should be retrained for each steering angle, experimental results have shown that the same set of coefficients can be used over a wide range of steering angles, and only a few sets of trained DPD coefficients are sufficient to minimize the distortion in a mm-wave RF beamforming array across a 120° steering range.
- 16 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (11) , 4479-4492
Digital Predistortion of Millimeter-Wave RF Beamforming Arrays Using Low Number of Steering Angle-Dependent Coefficient Sets
This paper proposes a single-input single-output (SISO) digital predistortion (DPD) model for linearizing millimeter-wave (mm-wave) RF beamforming arrays. It starts with a dual-input power amplifier (PA) model that accounts for steering angle-dependent load modulation effects. This dual-input model is then transformed into a SISO model under the assumption of weak PA nonlinearity and RF beamforming architecture. The underlying coefficients of the SISO array model incorporate the beamforming weights, antenna cross-coupling, channel coefficients, and any possible phase-shifter gain variation with phase shift setting. An over-the-air (OTA) measurement setup is finally developed to validate the capacity of a SISO DPD model to linearize two different arrays-under-test with 4 and 64 elements and radiating mm-wave modulated signals with 320- and 800-MHz bandwidth. Although, in principle, the DPD coefficients should be retrained for each steering angle, experimental results have shown that the same set of coefficients can be used over a wide range of steering angles, and only a few sets of trained DPD coefficients are sufficient to minimize the distortion in a mm-wave RF beamforming array across a 120° steering range.