Francesco Lunardon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Francesco Lunardon has a total of 148 co-authors. Here are the top co-authors by number of shared publications:
- Elena Gaio
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
11 shared publications - Alberto Maistrello
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4
10 shared publications - Roberto Piovan
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
5 shared publications - Alberto Ferro
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
4 shared publications Roberto Piovan
Consorzio RFX, Corso Stati Uniti 4, I-35127 Padua, Italy
4 shared publications- Francesco Santoro
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4
3 shared publications
Latest Publications
- 26 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4209-4216
MEST Multicoil System Control and Application Study to a PILOT FFHR With an RFP Fusion Core
The magnetic energy storage and transfer (MEST) system is a newly developed scheme to supply the superconducting (SC) coils in large-size tokamak and reversed field pinch (RFP) reactors to cope with the issues related to electrical power handling in these applications. It is a very promising alternative to face both the issues related to high active power peaks, required during plasma formation and control, and the huge reactive power demand, linked to the use of thyristor converters. The MEST system operating principle and control strategy supplying a single SC coil have already been outlined and studied in previous works. From this starting point, the MEST control system has been expanded to supply a complete set of SC poloidal field coils, considering the magnetic coupling and the energies associated with the magnets-plasma system, essential to control the overall system energy and achieve a certain degree of decoupling between the grid and the coils. This article presents and discusses the principles of controlling the currents of a complete set of poloidal field coils using the MEST system with efficient electrical power management. The application study to PILOT fusion–fission hybrid reactor (FFHR) is reported using analytical calculations and numerical simulations to assess the control operation.
- 26 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 4209-4216
MEST Multicoil System Control and Application Study to a PILOT FFHR With an RFP Fusion Core
The magnetic energy storage and transfer (MEST) system is a newly developed scheme to supply the superconducting (SC) coils in large-size tokamak and reversed field pinch (RFP) reactors to cope with the issues related to electrical power handling in these applications. It is a very promising alternative to face both the issues related to high active power peaks, required during plasma formation and control, and the huge reactive power demand, linked to the use of thyristor converters. The MEST system operating principle and control strategy supplying a single SC coil have already been outlined and studied in previous works. From this starting point, the MEST control system has been expanded to supply a complete set of SC poloidal field coils, considering the magnetic coupling and the energies associated with the magnets-plasma system, essential to control the overall system energy and achieve a certain degree of decoupling between the grid and the coils. This article presents and discusses the principles of controlling the currents of a complete set of poloidal field coils using the MEST system with efficient electrical power management. The application study to PILOT fusion–fission hybrid reactor (FFHR) is reported using analytical calculations and numerical simulations to assess the control operation.
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3970-3977
Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives
The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requirements, the applicability to DEMO PES of the technologies and design approaches adopted in ITER and nuclear power plants (NPP) has been evaluated. This article presents the results of the survey and proposes alternative solutions to deal with the identified criticalities.
- 21 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (9) , 3970-3977
Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives
The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requirements, the applicability to DEMO PES of the technologies and design approaches adopted in ITER and nuclear power plants (NPP) has been evaluated. This article presents the results of the survey and proposes alternative solutions to deal with the identified criticalities.
- Open Access
- 16 March 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 192
Control strategy for the magnetic energy storage and transfer system (MEST)
- 16 March 2023
- Published by Elsevier in Fusion Engineering and Design
- Vol. 192
Open AccessControl strategy for the magnetic energy storage and transfer system (MEST)
- 20 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (3) , 927-935
SPIDER, the Negative Ion Source Prototype for ITER: Overview of Operations and Cesium Injection
An overview of the recent operations and the main results of cesium injection in the Source for the Production of Ions of Deuterium Extracted from Rf plasma (SPIDER) negative ion source are described in this contribution. In experiments without cesium injection, all SPIDER plants were tested to verify the basic expectations on the operational parameters (e.g., electron cooling effectiveness of magnetic filter field) and to determine its operational region. For beam properties, it was shown that the current density varies across the beam in the vertical direction. In preliminary cesium experiments, the expected increase of negative ion current and simultaneous decrease of co-extracted electrons were found, along with the influence of the control parameters (polarization of the plasma electrodes, magnetic filter field) on the SPIDER beam uniformity in the horizontal and vertical directions. It was shown that non-Gaussian tails can be identified in the angular distribution on the plane perpendicular to the beam propagation direction. Stray particles, nonhomogeneous beam and large divergence might result in unexpected heat and particle loads over ITER neutral beam injector (NBI) accelerator grids; it is the goal of SPIDER to assess and possibly to identify suitable methods for controlling these beam features. A major shutdown, planned for late 2021, to solve the issues identified during the operation and to carry out scheduled modifications, is outlined. Such improvements are expected to allow SPIDER to pursue the ITER requirements in terms of negative ion current, electron-to-ion ratio, and beam duration.
- 20 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (3) , 927-935
SPIDER, the Negative Ion Source Prototype for ITER: Overview of Operations and Cesium Injection
An overview of the recent operations and the main results of cesium injection in the Source for the Production of Ions of Deuterium Extracted from Rf plasma (SPIDER) negative ion source are described in this contribution. In experiments without cesium injection, all SPIDER plants were tested to verify the basic expectations on the operational parameters (e.g., electron cooling effectiveness of magnetic filter field) and to determine its operational region. For beam properties, it was shown that the current density varies across the beam in the vertical direction. In preliminary cesium experiments, the expected increase of negative ion current and simultaneous decrease of co-extracted electrons were found, along with the influence of the control parameters (polarization of the plasma electrodes, magnetic filter field) on the SPIDER beam uniformity in the horizontal and vertical directions. It was shown that non-Gaussian tails can be identified in the angular distribution on the plane perpendicular to the beam propagation direction. Stray particles, nonhomogeneous beam and large divergence might result in unexpected heat and particle loads over ITER neutral beam injector (NBI) accelerator grids; it is the goal of SPIDER to assess and possibly to identify suitable methods for controlling these beam features. A major shutdown, planned for late 2021, to solve the issues identified during the operation and to carry out scheduled modifications, is outlined. Such improvements are expected to allow SPIDER to pursue the ITER requirements in terms of negative ion current, electron-to-ion ratio, and beam duration.
- 26 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4368-4374
Combined Capacitor–Resistor Energy Transfer System to Increase Plasma Current in RFX-Mod2
RFX-mod is an experimental fusion device, which contributes to plasma physics studies both in reversed field pinch (RFP) and tokamak configurations. Its high flexibility, due to an active magnetohydrodynamic (MHD) control system and the modular coils power supply (CPS) system, allowed operating RFX-mod in a wide range of experimental conditions with a plasma current up to$2$ MA. Experiments with such high plasma current allowed the study on new promising confinement regimes, dominated by a self-organization process with the generation of a helical structure in the plasma core. Presently, RFX-mod is under a significant upgrade (RFX-mod2) to extend the operational scenarios increasing the proximity between the conductive shell and the plasma. This main modification of the magnetic front-end, together with other main improvements, is expected to increase the performance of the machine in both magnetic configurations. In the frame of the studies to exploit the new potential of RFX-mod2 achieving a higher plasma current and longer flat-top duration, a solution based on additional magnetic energy storage has already been proposed. The study of RFP physics at higher plasma current could be crucial to confirm positive trends, such as electron temperature and persistence of quasi single helicity states with the plasma current, and to explore and achieve improved confinement states. This article presents an alternative reconfiguration of the poloidal power supply system of RFX-mod2 based on a combined resistor–capacitor energy transfer system. This system allows to store energy in capacitor banks during the first phase of the plasma current ramp-up and release it to the plasma when the magnetizing current changes polarity, driving the plasma current over 2.5 MA. The proposed upgrade does not involve radical poloidal CPS modifications, maintaining the present converters number and ratings and remaining within the power limits of the main power transformers (300 MVA).- 26 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4368-4374
Combined Capacitor–Resistor Energy Transfer System to Increase Plasma Current in RFX-Mod2
RFX-mod is an experimental fusion device, which contributes to plasma physics studies both in reversed field pinch (RFP) and tokamak configurations. Its high flexibility, due to an active magnetohydrodynamic (MHD) control system and the modular coils power supply (CPS) system, allowed operating RFX-mod in a wide range of experimental conditions with a plasma current up to$2$ MA. Experiments with such high plasma current allowed the study on new promising confinement regimes, dominated by a self-organization process with the generation of a helical structure in the plasma core. Presently, RFX-mod is under a significant upgrade (RFX-mod2) to extend the operational scenarios increasing the proximity between the conductive shell and the plasma. This main modification of the magnetic front-end, together with other main improvements, is expected to increase the performance of the machine in both magnetic configurations. In the frame of the studies to exploit the new potential of RFX-mod2 achieving a higher plasma current and longer flat-top duration, a solution based on additional magnetic energy storage has already been proposed. The study of RFP physics at higher plasma current could be crucial to confirm positive trends, such as electron temperature and persistence of quasi single helicity states with the plasma current, and to explore and achieve improved confinement states. This article presents an alternative reconfiguration of the poloidal power supply system of RFX-mod2 based on a combined resistor–capacitor energy transfer system. This system allows to store energy in capacitor banks during the first phase of the plasma current ramp-up and release it to the plasma when the magnetizing current changes polarity, driving the plasma current over 2.5 MA. The proposed upgrade does not involve radical poloidal CPS modifications, maintaining the present converters number and ratings and remaining within the power limits of the main power transformers (300 MVA).- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4311-4317
Double Poloidal Field System With Superconducting and Conventional Copper Coils for Induced High Loop Voltage: A New Concept and a Feasibility Study for an RFP FFHR
The reversed field pinch (RFP) could be a valid basis for the 14.1-MeV neutron source as required in fusion–fission hybrid reactors (FFHRs). The use of superconductors in an RFP reactor, although mandatory in the magnetizing/equilibrium coils, could represent an issue due to their limitations in the allowed magnetic field derivative, which is quite high during the initial plasma current phase of the RFP operation. A new concept is proposed based on a double-coil system: the first made with superconductors and the other with conventional copper coils. The basic principle is first introduced with the help of a simplified model that allows understanding the double-coil system operation. A feasibility study applying this solution has been carried out in the design of the poloidal magnetic system of a pilot RFP ($R$ $=$ 4 m and$a$ $=$ 0.8 m) as a fusion core for an FFHR. This article presents the preliminary results and, in particular, the possibility of obtaining high initial loop voltage for a fast rise of the RFP plasma current with a magnetic field derivative within the superconductor limits.- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 4311-4317
Double Poloidal Field System With Superconducting and Conventional Copper Coils for Induced High Loop Voltage: A New Concept and a Feasibility Study for an RFP FFHR
The reversed field pinch (RFP) could be a valid basis for the 14.1-MeV neutron source as required in fusion–fission hybrid reactors (FFHRs). The use of superconductors in an RFP reactor, although mandatory in the magnetizing/equilibrium coils, could represent an issue due to their limitations in the allowed magnetic field derivative, which is quite high during the initial plasma current phase of the RFP operation. A new concept is proposed based on a double-coil system: the first made with superconductors and the other with conventional copper coils. The basic principle is first introduced with the help of a simplified model that allows understanding the double-coil system operation. A feasibility study applying this solution has been carried out in the design of the poloidal magnetic system of a pilot RFP ($R$ $=$ 4 m and$a$ $=$ 0.8 m) as a fusion core for an FFHR. This article presents the preliminary results and, in particular, the possibility of obtaining high initial loop voltage for a fast rise of the RFP plasma current with a magnetic field derivative within the superconductor limits.- 19 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3928-3934
Early Operational Experience and Improvements of SPIDER Ion Source Power Supplies at Beam Energies Exceeding 30 keV
At the International Thermonuclear Experimental Reactor (ITER) Neutral Beam Test Facility in Padua (Italy), the ion source full-scale prototype--SPIDER--has been in operation since June 2018 and, as of March 2021, has begun to explore the range of beam energies exceeding 30 keV. This has revealed a number of novel issues with the power supplies of ion source and extractor, mainly associated with grid breakdowns. Those power supplies include a set of high current single quadrant resonant converters, known as ion source support power supplies (ISSSs) and a high voltage pulse step modulator feeding the extraction gap. Grid breakdowns at beam energies exceeding 30 keV have shown the capability to upset the output measurements of the ISSSs, limiting operation and reducing reliability of the whole system. This article describes work undertaken first to identify the issues, found to belong to two distinct categories: general failures of all ISSSs measurements and trips from the output voltage measurements of the extraction gap power supply. Further investigation has associated the failures of the ISSS measurements to transient voltage affecting the electronics during grid breakdowns. A number of modifications to both power circuit and electronics have been undertaken and successfully tested, achieving immunity down to the full SPIDER operating voltage (-96 kV). The extraction gap power supply overvoltage has been quantified and a temporary modification deployed, able to mitigate it significantly. A deeper redesign will be required in this case and is planned during the 2022 shutdown of the experiment.
- 19 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (11) , 3928-3934
Early Operational Experience and Improvements of SPIDER Ion Source Power Supplies at Beam Energies Exceeding 30 keV
At the International Thermonuclear Experimental Reactor (ITER) Neutral Beam Test Facility in Padua (Italy), the ion source full-scale prototype--SPIDER--has been in operation since June 2018 and, as of March 2021, has begun to explore the range of beam energies exceeding 30 keV. This has revealed a number of novel issues with the power supplies of ion source and extractor, mainly associated with grid breakdowns. Those power supplies include a set of high current single quadrant resonant converters, known as ion source support power supplies (ISSSs) and a high voltage pulse step modulator feeding the extraction gap. Grid breakdowns at beam energies exceeding 30 keV have shown the capability to upset the output measurements of the ISSSs, limiting operation and reducing reliability of the whole system. This article describes work undertaken first to identify the issues, found to belong to two distinct categories: general failures of all ISSSs measurements and trips from the output voltage measurements of the extraction gap power supply. Further investigation has associated the failures of the ISSS measurements to transient voltage affecting the electronics during grid breakdowns. A number of modifications to both power circuit and electronics have been undertaken and successfully tested, achieving immunity down to the full SPIDER operating voltage (-96 kV). The extraction gap power supply overvoltage has been quantified and a temporary modification deployed, able to mitigate it significantly. A deeper redesign will be required in this case and is planned during the 2022 shutdown of the experiment.
- 1 December 2021
- Published by Elsevier in Fusion Engineering and Design
- Vol. 173
Feasibility study of RFX-mod2 performance improvement by additional magnetic energy storage
- 1 December 2021
- Published by Elsevier in Fusion Engineering and Design
- Vol. 173
Feasibility study of RFX-mod2 performance improvement by additional magnetic energy storage
- 1 August 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 157
The MEST, a new magnetic energy storage and transfer system: Application studies to the European DEMO
- 1 August 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 157
The MEST, a new magnetic energy storage and transfer system: Application studies to the European DEMO
- 1 July 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 156
The EU DEMO Plant Electrical System: Issues and perspective
- 1 July 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 156
The EU DEMO Plant Electrical System: Issues and perspective