Mykola Savytskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mykola Savytskyi has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Karim Limam
2 shared publications- Maryna Bordun
Ukrainian State University of Science and Technologies
2 shared publications - Mykola Bevz
Lviv Polytechnic National University
2 shared publications - Костянтин Михайлович Сухий
член-кореспондент НАН України, ректор Українського державного університету науки і технологій
2 shared publications Ievgenii Iurchenko
1 shared publication- Iryna Bernyk
National University of Life and Environmental Sciences of Ukraine
1 shared publication
Latest Publications
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Application of additive technologies in the construction of energy-efficient buildings with a positive energy balance
The article is dedicated to the development of additive technologies, using 3D frames from concrete bags, for the formation of energy-efficient housing structures with a positive energy balance. The advantages of lining 3D-laminated shells with highly efficient thermal insulation materials (PU, ecowool, mineral wool, EPS) in the context of reduced heat loss, increased energy efficiency and fluidity wakefulness. A three-tier research methodology is described - laboratory testing, digital modeling (Revit, Rhinoceros, Grasshopper, Energy Plus) and implementation on a real everyday life with the parameters of the future. The robot examines current approaches to the development of modern 3D technology as one of the promising directions for the post-war renovation of the housing stock of Ukraine. It has been shown that the use of additive technologies makes it possible to significantly speed up the work cycle, reduce the wastage of materials, increase the level of automation of everyday processes and ensure flexibility architectural and planning solutions. Particular attention is paid to ensuring energy efficiency through the integration of thermal insulation materials into the structure of 3D-laminated wall elements, as well as the integration of structural systems from renewed energy sources. The results of the study of the optimal technological parameters of 3D frames, the terms of pressing concrete mixes for 3DPC, the thermal insulation characteristics of wall elements, the modeling of the generation of electrical energy from solar panels are presented. Power station with a varied number of solar panels, technical and economic efficiency of 3D technology compared to traditional technology. Optimal parameters for the hand process have been established, ranging from the relationship between the height of the ball and the diameter of the printer nozzle, the fluidity of the hand and the characteristics of inter-ball adhesion. The results of experimental studies of thermal insulation authorities of various types of insulation materials were compiled and the most effective design solutions were identified to meet the Energy+.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessApplication of additive technologies in the construction of energy-efficient buildings with a positive energy balance
The article is dedicated to the development of additive technologies, using 3D frames from concrete bags, for the formation of energy-efficient housing structures with a positive energy balance. The advantages of lining 3D-laminated shells with highly efficient thermal insulation materials (PU, ecowool, mineral wool, EPS) in the context of reduced heat loss, increased energy efficiency and fluidity wakefulness. A three-tier research methodology is described - laboratory testing, digital modeling (Revit, Rhinoceros, Grasshopper, Energy Plus) and implementation on a real everyday life with the parameters of the future. The robot examines current approaches to the development of modern 3D technology as one of the promising directions for the post-war renovation of the housing stock of Ukraine. It has been shown that the use of additive technologies makes it possible to significantly speed up the work cycle, reduce the wastage of materials, increase the level of automation of everyday processes and ensure flexibility architectural and planning solutions. Particular attention is paid to ensuring energy efficiency through the integration of thermal insulation materials into the structure of 3D-laminated wall elements, as well as the integration of structural systems from renewed energy sources. The results of the study of the optimal technological parameters of 3D frames, the terms of pressing concrete mixes for 3DPC, the thermal insulation characteristics of wall elements, the modeling of the generation of electrical energy from solar panels are presented. Power station with a varied number of solar panels, technical and economic efficiency of 3D technology compared to traditional technology. Optimal parameters for the hand process have been established, ranging from the relationship between the height of the ball and the diameter of the printer nozzle, the fluidity of the hand and the characteristics of inter-ball adhesion. The results of experimental studies of thermal insulation authorities of various types of insulation materials were compiled and the most effective design solutions were identified to meet the Energy+.
- Open Access
- 1 August 2025
- Published by Ukrainian State University of Science and Technologies
Матеріали VІ науково-практичної конференції студентів, аспірантів і молодих вчених
У збірнику тез науково-практичної конференції студентів, аспірантів і молодих вчених розглядаються питання архітектури та містобудування, дизайну й образотворчого мистецтва, теоретичної основи будівництва, новітніх технологій, конструкцій та матеріалів для будівництва, реконструкції та відновлення будівель і споруд, інженерних систем будівель, енергоефективності, екологічних проблем, інформаційних технологій, механічної інженерії, матеріалознавства, економіки, фінансів, підприємницької діяльності, маркетингу та менеджменту, гуманітарної складової у вимірах сучасних вимог до будівельно-архітектурної галузі, а також роль фізичної культури та спорту у вихованні здорової нації. Робочі мови конференції – українська, англійська. Для викладачів, вчених, аспірантів, магістрів, бакалаврів, студентів технічних та гуманітраних факультетів, а також для широкого кола читачів.
- 1 August 2025
- Published by Ukrainian State University of Science and Technologies
Open AccessМатеріали VІ науково-практичної конференції студентів, аспірантів і молодих вчених
У збірнику тез науково-практичної конференції студентів, аспірантів і молодих вчених розглядаються питання архітектури та містобудування, дизайну й образотворчого мистецтва, теоретичної основи будівництва, новітніх технологій, конструкцій та матеріалів для будівництва, реконструкції та відновлення будівель і споруд, інженерних систем будівель, енергоефективності, екологічних проблем, інформаційних технологій, механічної інженерії, матеріалознавства, економіки, фінансів, підприємницької діяльності, маркетингу та менеджменту, гуманітарної складової у вимірах сучасних вимог до будівельно-архітектурної галузі, а також роль фізичної культури та спорту у вихованні здорової нації. Робочі мови конференції – українська, англійська. Для викладачів, вчених, аспірантів, магістрів, бакалаврів, студентів технічних та гуманітраних факультетів, а також для широкого кола читачів.
- 1 January 2025
- Published by Lviv Polytechnic National University in Current Issues in Research, Conservation and Restoration of Historic Fortifications
- Vol. 2025 (22) , 73-91
A RISK-ORIENTED APPROACH TO PRESERVE UKRAINE'S HISTORICAL AND CULTURAL HERITAGE UNDER MILITARY THREAT
The article discusses the risk-oriented approach to preserving the Ukranian historical and cultural heritage in conditions of an existing and potential military threat. The proposals for the formation of urban planning policy are offered based on the spatial and territorial distribution of the territory of Ukraine by the level of military risk. The proposals will allow for determining the priority architectural, planning, engineering, and technical measures to ensure the security of historical and cultural heritage. A quantitative assessment of existing and potential risk levels was conducted. Also, actual damages to historical and cultural heritage sites were recorded by region in Ukraine. The most dangerous regions that require urgent implementation of measures to ensure the security of such sites were identified. In addition, a comprehensive multi-level system of historical and cultural heritage protection of sites is proposed. The system includes preventive, organizational, constructive, and technical measures, and urgent evacuation measures for historical and cultural values.
- 1 January 2025
- Published by Lviv Polytechnic National University in Current Issues in Research, Conservation and Restoration of Historic Fortifications
- Vol. 2025 (22) , 73-91
A RISK-ORIENTED APPROACH TO PRESERVE UKRAINE'S HISTORICAL AND CULTURAL HERITAGE UNDER MILITARY THREAT
The article discusses the risk-oriented approach to preserving the Ukranian historical and cultural heritage in conditions of an existing and potential military threat. The proposals for the formation of urban planning policy are offered based on the spatial and territorial distribution of the territory of Ukraine by the level of military risk. The proposals will allow for determining the priority architectural, planning, engineering, and technical measures to ensure the security of historical and cultural heritage. A quantitative assessment of existing and potential risk levels was conducted. Also, actual damages to historical and cultural heritage sites were recorded by region in Ukraine. The most dangerous regions that require urgent implementation of measures to ensure the security of such sites were identified. In addition, a comprehensive multi-level system of historical and cultural heritage protection of sites is proposed. The system includes preventive, organizational, constructive, and technical measures, and urgent evacuation measures for historical and cultural values.
- Open Access
- 28 June 2024
- Published by SHEE Prydniprovska State Academy of Civil Engineering and Architecture
Матеріали науково-практичної конференції «Просування енергоефективності та підготовка фахівців для відбудови України» (13 березня 2024 р.): збірник тез під редакцією Миколи Савицького, Костянтина Сухого, Владислава Данішевського, Анатолія Радкевича, Євгенія Юрченка, Олени Коваль, Марини Ляховецької-Токарєвої. Дніпро: Енерго-інноваційний хаб ПДАБА, 2024. 128 с. (електронне видання)
The collection of theses examines the results of scientific research and practical experience in the field of energy efficiency and innovative technologies during the reconstruction of Ukraine. The working languages of the conference are Ukrainian, English. For representatives of business and government, scientists, graduate students, teachers, masters, bachelors, students of technical and humanitarian faculties, as well as for a wide range of readers. Approved for publication by the Scientific Council of the PDABA (protocol No. 8 dated February 27, 2024). The scientific and practical conference was implemented within the framework of the projects: "Promotion of energy efficiency and implementation of the EU Energy Efficiency Directive in Ukraine" (FEER), implemented in Ukraine by Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German government; 101082898 – UKRENERGY, co-financed by the European Union: "Innovative master's courses to support the improvement of the energy and carbon footprint of the building stock of Ukraine"; 101127884 – The BRIDGE - Bridging the gap between university and industry: an innovative master's degree program supporting the development of green jobs and digital skills in the Ukrainian construction sector. У збірнику тез розглядаються результати наукових досліджень і практичного досвіду в сфері енергоефективності та інноваційних технологій при відбудові України. Робочі мови конференції – українська, англійська. Для представників бізнесу і влади, вчених, аспірантів, викладачів, магістрів, бакалаврів, студентів технічних та гуманітраних факультетів, а також для широкого кола читачів. Затверджено до видання вченою радою ПДАБА (протокол № 8 від 27.02.2024). Науково-практична конференція реалізована в рамках проєктів: «Просування енергоефективності та імплементації Директиви ЄС з енергоефективності в Україні» (FEER), що реалізується в Україні Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH за дорученням уряду Німеччини; 101082898 – UKRENERGY, що співфінансується Європейським Союзом: «Інноваційні магістерські курси на підтримку покращення енергетичного та вуглецевого сліду будівельного фонду України»; 101127884 – The BRIDGE - Подолання розриву між університетом і промисловістю: інноваційна магістерська навчальна програма, що підтримує розвиток зелених робочих місць і цифрових навичок в українському будівельному секторі.
- 28 June 2024
- Published by SHEE Prydniprovska State Academy of Civil Engineering and Architecture
Open AccessМатеріали науково-практичної конференції «Просування енергоефективності та підготовка фахівців для відбудови України» (13 березня 2024 р.): збірник тез під редакцією Миколи Савицького, Костянтина Сухого, Владислава Данішевського, Анатолія Радкевича, Євгенія Юрченка, Олени Коваль, Марини Ляховецької-Токарєвої. Дніпро: Енерго-інноваційний хаб ПДАБА, 2024. 128 с. (електронне видання)
The collection of theses examines the results of scientific research and practical experience in the field of energy efficiency and innovative technologies during the reconstruction of Ukraine. The working languages of the conference are Ukrainian, English. For representatives of business and government, scientists, graduate students, teachers, masters, bachelors, students of technical and humanitarian faculties, as well as for a wide range of readers. Approved for publication by the Scientific Council of the PDABA (protocol No. 8 dated February 27, 2024). The scientific and practical conference was implemented within the framework of the projects: "Promotion of energy efficiency and implementation of the EU Energy Efficiency Directive in Ukraine" (FEER), implemented in Ukraine by Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German government; 101082898 – UKRENERGY, co-financed by the European Union: "Innovative master's courses to support the improvement of the energy and carbon footprint of the building stock of Ukraine"; 101127884 – The BRIDGE - Bridging the gap between university and industry: an innovative master's degree program supporting the development of green jobs and digital skills in the Ukrainian construction sector. У збірнику тез розглядаються результати наукових досліджень і практичного досвіду в сфері енергоефективності та інноваційних технологій при відбудові України. Робочі мови конференції – українська, англійська. Для представників бізнесу і влади, вчених, аспірантів, викладачів, магістрів, бакалаврів, студентів технічних та гуманітраних факультетів, а також для широкого кола читачів. Затверджено до видання вченою радою ПДАБА (протокол № 8 від 27.02.2024). Науково-практична конференція реалізована в рамках проєктів: «Просування енергоефективності та імплементації Директиви ЄС з енергоефективності в Україні» (FEER), що реалізується в Україні Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH за дорученням уряду Німеччини; 101082898 – UKRENERGY, що співфінансується Європейським Союзом: «Інноваційні магістерські курси на підтримку покращення енергетичного та вуглецевого сліду будівельного фонду України»; 101127884 – The BRIDGE - Подолання розриву між університетом і промисловістю: інноваційна магістерська навчальна програма, що підтримує розвиток зелених робочих місць і цифрових навичок в українському будівельному секторі.
- Open Access
- 28 June 2014
- Published by David Publishing Company in Journal of Energy and Power Engineering
- Vol. 8 (6)
Economic Feasibility Evaluation of Building Passive Houses
- 28 June 2014
- Published by David Publishing Company in Journal of Energy and Power Engineering
- Vol. 8 (6)
Open AccessEconomic Feasibility Evaluation of Building Passive Houses
- Open Access
- 1 January 2013
- Published by Elsevier in Energy Procedia
- Vol. 42, 775-783
Methods and Results of Experimental Researches of Thermal Conductivity of Soils
- 1 January 2013
- Published by Elsevier in Energy Procedia
- Vol. 42, 775-783
Open AccessMethods and Results of Experimental Researches of Thermal Conductivity of Soils