Preetham Goli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Preetham Goli has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
Wajiha Shireen
University of Houston,Department of Engr Tech Department of ECE
7 shared publications- Srinivasa Rao Gampa
Department of Electrical and Electronics Engineering, Gudlavalleru Engineering College, Andhra Pradesh, India
6 shared publications Srikanth Yelem
Division of Energy, Matter and Systems, University of Missouri Kansas City, Kansas City, MO, United States
4 shared publications- Debapriya Das
Department of Electrical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal, India
3 shared publications - Kiran Jasthi
Department of Electrical & Electronics Engineering, VNR Vignana Jyothi Institute of Engineering and Technology, Hyderabad 500090, Telangana, India
3 shared publications - Amarendra Alluri
Department of Electrical & Electronics Engineering, Seshadri Rao Gudlavalleru Engineering College, Gudlavalleru, Gudiwada 521356, Andhra Pradesh, India
2 shared publications
Latest Publications
- Open Access
- 26 September 2026
- Published by MDPI AG in Sustainability
- Vol. 18  (19) , 9855
Optimum Design of Daily Load Profile of Distribution Systems Under Demand Response Conditions Using Fuzzy Multi-Objective Approach Based on Artificial Rabbits Optimization Technique
Demand response strategies are widely used by utilities to encourage customers to shift their loads from peak to off-peak periods, thereby offering lower electricity prices. This research proposes a fuzzy multi-objective artificial rabbits optimization (ARO) technique to design the optimal daily load profile of a distribution system under demand response. The daily load profile is partitioned into three zones comprising the left valley, peak period, and right valley. Two load-shifting factors governing the redistribution of peak-period demand between the two valley regions are optimized, ensuring that neither valley load factor exceeds the resulting post-shift peak load factor, while simultaneously accounting for cost-reduction and voltage-performance objectives. Optimally sized distributed generators (DGs) are allocated when demand response alone cannot restore voltage compliance. Simulation results presented for the 69-bus and 123-bus systems demonstrate that shifting load only to the left valley yields a 5.57% energy charge reduction and shifting the load only to the right valley results in a 2.43% reduction. The fuzzy multi-objective solution attains a 4.00% reduction while satisfying the loss and voltage objectives. The minimum voltage of the 69-bus system is restored to 0.95 p.u. with DG, while the 123-bus system complies without DG, and both show reduced daily real power losses. By mitigating peak demand, reducing real power losses, and integrating optimally sized DGs, the proposed method decreases the amount of energy that must be generated and delivered to satisfy the same load demand. In addition, it can defer network reinforcement requirements, thereby enhancing the economic and environmental sustainability of the distribution system.
- 26 September 2026
- Published by MDPI AG in Sustainability
- Vol. 18  (19) , 9855
Open AccessOptimum Design of Daily Load Profile of Distribution Systems Under Demand Response Conditions Using Fuzzy Multi-Objective Approach Based on Artificial Rabbits Optimization Technique
Demand response strategies are widely used by utilities to encourage customers to shift their loads from peak to off-peak periods, thereby offering lower electricity prices. This research proposes a fuzzy multi-objective artificial rabbits optimization (ARO) technique to design the optimal daily load profile of a distribution system under demand response. The daily load profile is partitioned into three zones comprising the left valley, peak period, and right valley. Two load-shifting factors governing the redistribution of peak-period demand between the two valley regions are optimized, ensuring that neither valley load factor exceeds the resulting post-shift peak load factor, while simultaneously accounting for cost-reduction and voltage-performance objectives. Optimally sized distributed generators (DGs) are allocated when demand response alone cannot restore voltage compliance. Simulation results presented for the 69-bus and 123-bus systems demonstrate that shifting load only to the left valley yields a 5.57% energy charge reduction and shifting the load only to the right valley results in a 2.43% reduction. The fuzzy multi-objective solution attains a 4.00% reduction while satisfying the loss and voltage objectives. The minimum voltage of the 69-bus system is restored to 0.95 p.u. with DG, while the 123-bus system complies without DG, and both show reduced daily real power losses. By mitigating peak demand, reducing real power losses, and integrating optimally sized DGs, the proposed method decreases the amount of energy that must be generated and delivered to satisfy the same load demand. In addition, it can defer network reinforcement requirements, thereby enhancing the economic and environmental sustainability of the distribution system.
- 26 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Assessing the Impact of Extreme Weather on Power System Reliability
Extreme weather conditions have been recognized as significant reliability risks following a number of notable events. These conditions impact wide areas of the transmission system and frequently result in significant out of season demand increases that stress the electric transmission and distribution systems. This paper presents a modeling methodology for developing historical extreme weather event assessments by tuning power flow cases and performing contingency analysis. This paper applies this methodology to an extreme cold weather event, but a similar analysis should be performed to assess the impact of extreme heat on the system. Common mode dependences are incorporated into this analysis that are in line with observed performance deficiencies during cold weather events. This work is important at this moment as there is increasing dependence on the electric system following accelerating transitions in electrification, significant growth in electric demand associated with the proliferation of data centers and other large loads, and a shift to weather dependent generation resources such as wind, solar, hydro, and natural gas-fueled power generation. Reliability risks must be identified so that corrective action plans can be established and implemented, as outages can translate to risks to human life. This paper demonstrates a method in which the historical environmental inputs can be directly integrated into existing power flow simulation models for use in contingency analysis and optimal power flow.
- 26 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Assessing the Impact of Extreme Weather on Power System Reliability
Extreme weather conditions have been recognized as significant reliability risks following a number of notable events. These conditions impact wide areas of the transmission system and frequently result in significant out of season demand increases that stress the electric transmission and distribution systems. This paper presents a modeling methodology for developing historical extreme weather event assessments by tuning power flow cases and performing contingency analysis. This paper applies this methodology to an extreme cold weather event, but a similar analysis should be performed to assess the impact of extreme heat on the system. Common mode dependences are incorporated into this analysis that are in line with observed performance deficiencies during cold weather events. This work is important at this moment as there is increasing dependence on the electric system following accelerating transitions in electrification, significant growth in electric demand associated with the proliferation of data centers and other large loads, and a shift to weather dependent generation resources such as wind, solar, hydro, and natural gas-fueled power generation. Reliability risks must be identified so that corrective action plans can be established and implemented, as outages can translate to risks to human life. This paper demonstrates a method in which the historical environmental inputs can be directly integrated into existing power flow simulation models for use in contingency analysis and optimal power flow.
- Open Access
- 30 August 2025
- Published by MDPI AG in Inventions
- Vol. 10  (5) , 79
Optimum Sizing of Solar Photovoltaic Panels at Optimum Tilt and Azimuth Angles Using Grey Wolf Optimization Algorithm for Distribution Systems
This paper presents a novel methodology for the optimal sizing of solar photovoltaic (PV) systems in distribution networks by determining the monthly optimum tilt and azimuth angles to maximize solar energy capture. Using one year of solar irradiation data, the Grey Wolf Optimizer (GWO) is employed to optimize the tilt and azimuth angles with the objective of maximizing monthly solar insolation. Unlike existing approaches that assume fixed azimuth angles, the proposed method calculates both tilt and azimuth angles for each month, allowing for a more precise alignment with solar trajectories. The optimized orientation parameters are subsequently utilized to determine the optimal number and placement of PV panels, as well as the optimal location and sizing of shunt capacitor (SC) banks, for the IEEE 69-bus distribution system. This optimization is performed under peak load conditions using the GWO, with the objectives of minimizing active power losses, enhancing voltage profile stability, and maximizing PV system penetration. The long-term impact of this approach is assessed through a 20-year energy and economic savings analysis, demonstrating substantial improvements in energy efficiency and cost-effectiveness.
- 30 August 2025
- Published by MDPI AG in Inventions
- Vol. 10  (5) , 79
Open AccessOptimum Sizing of Solar Photovoltaic Panels at Optimum Tilt and Azimuth Angles Using Grey Wolf Optimization Algorithm for Distribution Systems
This paper presents a novel methodology for the optimal sizing of solar photovoltaic (PV) systems in distribution networks by determining the monthly optimum tilt and azimuth angles to maximize solar energy capture. Using one year of solar irradiation data, the Grey Wolf Optimizer (GWO) is employed to optimize the tilt and azimuth angles with the objective of maximizing monthly solar insolation. Unlike existing approaches that assume fixed azimuth angles, the proposed method calculates both tilt and azimuth angles for each month, allowing for a more precise alignment with solar trajectories. The optimized orientation parameters are subsequently utilized to determine the optimal number and placement of PV panels, as well as the optimal location and sizing of shunt capacitor (SC) banks, for the IEEE 69-bus distribution system. This optimization is performed under peak load conditions using the GWO, with the objectives of minimizing active power losses, enhancing voltage profile stability, and maximizing PV system penetration. The long-term impact of this approach is assessed through a 20-year energy and economic savings analysis, demonstrating substantial improvements in energy efficiency and cost-effectiveness.
- Open Access
- 21 May 2025
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 13, 1511978
Fuel efficiency and economic assessment of a hybrid power supply system for mission critical applications
Hybrid power supplies leveraging renewable energy sources have emerged as pivotal solutions ensuring uninterrupted power for critical applications like telecom towers in remote regions. However, limited research has evaluated the real-world performance, fuel efficiency and economic viability of commercially deployed systems particularly those using liquid propane (LP) as the primary fuel source. This paper evaluates the feasibility and efficacy of a hybrid power supply integrating a LP generator, Battery Energy Storage (BES) and Photovoltaic Panel (PV). Three configurations—LP only, LP-BES and LP-BES-PV are assessed using a spreadsheet based simulation across multiple loading conditions and geographic regions, including Canada, Nigeria and Kansas City. Results show that integrating BES and PV can reduce annual fuel consumption by over 55%, significantly lowering operating costs and greenhouse gas emissions. A 20-year total cost of ownership (TCO) analysis demonstrates that hybrid configurations can achieve up to 32% cost savings compared to LP only systems. Environmental impact is quantified using EPA emission factors, revealing that the hybrid system can avoid more than 65.8 metric tons of CO2 annually. Sensitivity analysis further examines the impact of fuel prices, solar energy output and battery costs on system performance. The findings underscore the operational and environmental benefits of hybridizing LP based systems with renewable technologies. While LP based systems offer unique advantages for remote deployments, such as fuel stability and ease of storage, this study confirms that integrating PV and BES significantly enhances performance and long-term cost-effectiveness.
- 21 May 2025
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 13, 1511978
Open AccessFuel efficiency and economic assessment of a hybrid power supply system for mission critical applications
Hybrid power supplies leveraging renewable energy sources have emerged as pivotal solutions ensuring uninterrupted power for critical applications like telecom towers in remote regions. However, limited research has evaluated the real-world performance, fuel efficiency and economic viability of commercially deployed systems particularly those using liquid propane (LP) as the primary fuel source. This paper evaluates the feasibility and efficacy of a hybrid power supply integrating a LP generator, Battery Energy Storage (BES) and Photovoltaic Panel (PV). Three configurations—LP only, LP-BES and LP-BES-PV are assessed using a spreadsheet based simulation across multiple loading conditions and geographic regions, including Canada, Nigeria and Kansas City. Results show that integrating BES and PV can reduce annual fuel consumption by over 55%, significantly lowering operating costs and greenhouse gas emissions. A 20-year total cost of ownership (TCO) analysis demonstrates that hybrid configurations can achieve up to 32% cost savings compared to LP only systems. Environmental impact is quantified using EPA emission factors, revealing that the hybrid system can avoid more than 65.8 metric tons of CO2 annually. Sensitivity analysis further examines the impact of fuel prices, solar energy output and battery costs on system performance. The findings underscore the operational and environmental benefits of hybridizing LP based systems with renewable technologies. While LP based systems offer unique advantages for remote deployments, such as fuel stability and ease of storage, this study confirms that integrating PV and BES significantly enhances performance and long-term cost-effectiveness.
- Top Cited Papers
- 3 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 16  (3) , 2554-2573
Cyber-Physical Interdependence for Power System Operation and Control
This paper summarizes the technical endeavors undertaken by the Task Force (TF) on Cyber-Physical Interdependence for Power System Operation and Control. The TF was established to investigate the cyber-physical interdependence of critical power system elements and their influence on the operation and control of energy systems. State-of-the-art analysis techniques, including co-simulation and digital twin technologies, are employed to address various layers of interdependence between cyber and physical systems, facilitating the identification of potential threats and vulnerabilities. The paper examines prospective trajectories for resilient cyber-physical systems and outlines the educational and workforce training imperatives for addressing cybersecurity threats in contemporary power systems. Furthermore, concluding remarks and future recommendations are provided to mitigate the inherent vulnerabilities within the extensively interoperable grid infrastructure.
- 3 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 16  (3) , 2554-2573
Top Cited PapersCyber-Physical Interdependence for Power System Operation and Control
This paper summarizes the technical endeavors undertaken by the Task Force (TF) on Cyber-Physical Interdependence for Power System Operation and Control. The TF was established to investigate the cyber-physical interdependence of critical power system elements and their influence on the operation and control of energy systems. State-of-the-art analysis techniques, including co-simulation and digital twin technologies, are employed to address various layers of interdependence between cyber and physical systems, facilitating the identification of potential threats and vulnerabilities. The paper examines prospective trajectories for resilient cyber-physical systems and outlines the educational and workforce training imperatives for addressing cybersecurity threats in contemporary power systems. Furthermore, concluding remarks and future recommendations are provided to mitigate the inherent vulnerabilities within the extensively interoperable grid infrastructure.
- Open Access
- 5 December 2022
- Published by Atlantis Press SARL
- p. 113-123
Optimum Placement of Battery Energy Storage Systems and Solar PV Units in Distribution Networks Using Gravitational Search Algorithm
- 5 December 2022
- Published by Atlantis Press SARL
- p. 113-123
Open AccessOptimum Placement of Battery Energy Storage Systems and Solar PV Units in Distribution Networks Using Gravitational Search Algorithm
- 28 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Optimal Planning of Smart Charging Facilities using Grey Wolf Optimizer
The proliferation of Plug-in Electric Vehicles (PEVs) has a detrimental effect on the operation of the distribution system. Photovoltaic powered charging stations (PCFs) integrated with energy storage offer a viable solution to reduce the dependency on the electric grid for charging PEVs. To maximize the benefits of PCFs, they should be integrated into the distribution network at optimum locations. A well-planned and operated charging facility would provide several benefits to the distribution network, such as reducing power losses, improved voltage regulation, and reactive power support. This paper proposes a three-stage optimization algorithm based on Grey Wolf Optimizer (GWO) for the optimal planning of PCFs integrated with energy storage. The objectives include the reduction of power losses and the improvement in voltage profile while maximizing the contribution from the photovoltaic system. Several scenarios are simulated using the IEEE 13-bus unbalanced radial distribution feeder to validate the effectiveness of the algorithm.
- 28 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Optimal Planning of Smart Charging Facilities using Grey Wolf Optimizer
The proliferation of Plug-in Electric Vehicles (PEVs) has a detrimental effect on the operation of the distribution system. Photovoltaic powered charging stations (PCFs) integrated with energy storage offer a viable solution to reduce the dependency on the electric grid for charging PEVs. To maximize the benefits of PCFs, they should be integrated into the distribution network at optimum locations. A well-planned and operated charging facility would provide several benefits to the distribution network, such as reducing power losses, improved voltage regulation, and reactive power support. This paper proposes a three-stage optimization algorithm based on Grey Wolf Optimizer (GWO) for the optimal planning of PCFs integrated with energy storage. The objectives include the reduction of power losses and the improvement in voltage profile while maximizing the contribution from the photovoltaic system. Several scenarios are simulated using the IEEE 13-bus unbalanced radial distribution feeder to validate the effectiveness of the algorithm.
- Open Access
- 16 February 2022
- Published by MDPI AG in Smart Cities
- Vol. 5  (1) , 177-205
Electric Vehicle Charging Load Allocation at Residential Locations Utilizing the Energy Savings Gained by Optimal Network Reconductoring
In this study, a two-stage methodology based on the energy savings gained by optimal network reconductoring was developed for the sizing and allocation of electric vehicle (EV) charging load at the residential locations in urban distribution systems. During the first stage, the Flower Pollination Algorithm (FPA) was applied to minimize the annual energy losses of the radial distribution system through optimum network reconductoring. A multi-objective function was formulated to minimize investment, peak loss, and annual energy loss costs at different load factors. The results obtained with the flower pollination algorithm were compared with the particle swarm optimization algorithm. In the second stage, a simple heuristic procedure was developed for the sizing and allocation of EV charging load at every node of the distribution system utilizing part of the annual energy savings obtained by optimal network reconductoring. The number of electric cars, electric bikes, and electric scooters that can be charged at every node was computed while maintaining the voltage and branch current constraints. The simulation results were demonstrated on 123 bus and 51 bus radial distribution networks to validate the effectiveness of the proposed methodology.
- 16 February 2022
- Published by MDPI AG in Smart Cities
- Vol. 5  (1) , 177-205
Open AccessElectric Vehicle Charging Load Allocation at Residential Locations Utilizing the Energy Savings Gained by Optimal Network Reconductoring
In this study, a two-stage methodology based on the energy savings gained by optimal network reconductoring was developed for the sizing and allocation of electric vehicle (EV) charging load at the residential locations in urban distribution systems. During the first stage, the Flower Pollination Algorithm (FPA) was applied to minimize the annual energy losses of the radial distribution system through optimum network reconductoring. A multi-objective function was formulated to minimize investment, peak loss, and annual energy loss costs at different load factors. The results obtained with the flower pollination algorithm were compared with the particle swarm optimization algorithm. In the second stage, a simple heuristic procedure was developed for the sizing and allocation of EV charging load at every node of the distribution system utilizing part of the annual energy savings obtained by optimal network reconductoring. The number of electric cars, electric bikes, and electric scooters that can be charged at every node was computed while maintaining the voltage and branch current constraints. The simulation results were demonstrated on 123 bus and 51 bus radial distribution networks to validate the effectiveness of the proposed methodology.
- 18 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Designing SMC Boost Converter for DVR Using VSI to Mitigate Voltage Disturbances And Harmonics
In this paper a new topology for dynamic voltage restorer is designed at the load end to maintain voltage tolerance and mitigate total harmonic distortion (THD) which meets IEEE-519 and IEEE-1159 specifications. This proposed architecture consists of dynamic voltage restorer (DVR), including loadable batteries, switches, SMC boost converter and an injection transformer. The simulation results obtained using MATLAB/Simulink demonstrate that the total harmonic distortion is significantly.
- 18 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Designing SMC Boost Converter for DVR Using VSI to Mitigate Voltage Disturbances And Harmonics
In this paper a new topology for dynamic voltage restorer is designed at the load end to maintain voltage tolerance and mitigate total harmonic distortion (THD) which meets IEEE-519 and IEEE-1159 specifications. This proposed architecture consists of dynamic voltage restorer (DVR), including loadable batteries, switches, SMC boost converter and an injection transformer. The simulation results obtained using MATLAB/Simulink demonstrate that the total harmonic distortion is significantly.
- Top Cited Papers
- 1 February 2020
- Published by Elsevier in Journal of Energy Storage
- Vol. 27
Grasshopper optimization algorithm based two stage fuzzy multiobjective approach for optimum sizing and placement of distributed generations, shunt capacitors and electric vehicle charging stations
- 1 February 2020
- Published by Elsevier in Journal of Energy Storage
- Vol. 27
Top Cited PapersGrasshopper optimization algorithm based two stage fuzzy multiobjective approach for optimum sizing and placement of distributed generations, shunt capacitors and electric vehicle charging stations