Jae-Sang Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jae-Sang Lee has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Su-Jin Jeon
Chung-Ang Univ. (Korea, Republic of)
9 shared publications - Young-Wan Choi
Chung-Ang Univ. (Korea, Republic of)
9 shared publications - Seok-Ho Hong
Department of Electrical and Electronics Engineering, Chung-Ang University, Dongjak-gu, Seoul, Republic of Korea
3 shared publications - Woo June Choi
School of Electrical and Electronics Engineering, Chung-Ang University, Seoul 06974, Republic of Korea
3 shared publications - Yong-Jin Kim
Department of Electrical and Electronics Engineering, Chung-Ang University, Dongjak-gu, Seoul, Republic of Korea
3 shared publications Do-Hyun Kim
Chung-Ang University, Department of Electrical and Electronics Engineering, Seoul, Korea
2 shared publications
Latest Publications
- 1 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (4) , 219-222
Multicore Fiber Relay Optics for Comfortable See-Through Vision in Augmented Reality Display
Despite recent advancements in augmented reality (AR) displays, conventional AR head-mounted displays (HMD) lack comfort due to heat and size, which hinders daily use. To address these issues, we propose an approach for AR-HMD optics that uses a multicore fiber (MCF) to transfer virtual content from a light engine in the user’s pocket to an eyepiece. This allows the HMD to avoid heat generation and maintain a compact form factor. In this work, we design and demonstrate MCF-relayed AR optics in two conventional types of AR-HMDs: birdbath and exit-pupil expansion (EPE) type AR-HMDs. This results in light engine-free AR displays within the HMDs. Furthermore, we compare birdbath and EPE displays in terms of field of view (FOV), modulation transfer function (MTF), and optical efficiency (OE). The results show that our proposed AR optics is applicable to both AR-HMDs. This early stage work suggests the feasibility of unobtrusive and comfortable eyewear for AR display.
- 1 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (4) , 219-222
Multicore Fiber Relay Optics for Comfortable See-Through Vision in Augmented Reality Display
Despite recent advancements in augmented reality (AR) displays, conventional AR head-mounted displays (HMD) lack comfort due to heat and size, which hinders daily use. To address these issues, we propose an approach for AR-HMD optics that uses a multicore fiber (MCF) to transfer virtual content from a light engine in the user’s pocket to an eyepiece. This allows the HMD to avoid heat generation and maintain a compact form factor. In this work, we design and demonstrate MCF-relayed AR optics in two conventional types of AR-HMDs: birdbath and exit-pupil expansion (EPE) type AR-HMDs. This results in light engine-free AR displays within the HMDs. Furthermore, we compare birdbath and EPE displays in terms of field of view (FOV), modulation transfer function (MTF), and optical efficiency (OE). The results show that our proposed AR optics is applicable to both AR-HMDs. This early stage work suggests the feasibility of unobtrusive and comfortable eyewear for AR display.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Readout Circuit System to Improve the Spatial Resolution and Measurable Energy Range of a Compton Camera
In this paper, we focus on tackling position distortion in Compton imaging systems by proposing a readout circuit based on a current conveyor. Compton imaging is a technique used for reconstructing radiation source images by analyzing the kinematics of Compton scattering. Accurate positioning of detectors is crucial for achieving high-quality imaging results. However, using a conventional readout circuit coupled with a resistive network to reduce the number of channels can introduce positional distortion in the image, and the amount of distortion depends on the gain of the readout circuit. Therefore, the measurable energy range is limited. In our study, we analyze the factors contributing to position distortion caused by electronic devices and present a novel readout circuit based on a current conveyor. This circuit aims to minimize position error and mitigate the effects of electronic characteristics while controlling the gain of the signal. Experimental verification is conducted using gamma-ray sources to evaluate the proposed readout circuit. The results showed that with 2× and 10× gain, the same positional characteristics were found, and the distortion was also greatly improved, approaching the ideal position of the image. It also suggests that the range of measurable energy extends from 80 keV to 1.3 MeV, which could improve the performance of the Compton camera. Overall, our research makes a valuable contribution to the field of Compton imaging. The proposed readout circuit effectively reduces position distortion and expands the measurable energy range, leading to improved performance and reliability of Compton cameras in various applications.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Readout Circuit System to Improve the Spatial Resolution and Measurable Energy Range of a Compton Camera
In this paper, we focus on tackling position distortion in Compton imaging systems by proposing a readout circuit based on a current conveyor. Compton imaging is a technique used for reconstructing radiation source images by analyzing the kinematics of Compton scattering. Accurate positioning of detectors is crucial for achieving high-quality imaging results. However, using a conventional readout circuit coupled with a resistive network to reduce the number of channels can introduce positional distortion in the image, and the amount of distortion depends on the gain of the readout circuit. Therefore, the measurable energy range is limited. In our study, we analyze the factors contributing to position distortion caused by electronic devices and present a novel readout circuit based on a current conveyor. This circuit aims to minimize position error and mitigate the effects of electronic characteristics while controlling the gain of the signal. Experimental verification is conducted using gamma-ray sources to evaluate the proposed readout circuit. The results showed that with 2× and 10× gain, the same positional characteristics were found, and the distortion was also greatly improved, approaching the ideal position of the image. It also suggests that the range of measurable energy extends from 80 keV to 1.3 MeV, which could improve the performance of the Compton camera. Overall, our research makes a valuable contribution to the field of Compton imaging. The proposed readout circuit effectively reduces position distortion and expands the measurable energy range, leading to improved performance and reliability of Compton cameras in various applications.
- Open Access
- 1 February 2022
- Published by Springer Nature in Journal of the Korean Physical Society
- Vol. 80 (8) , 799-807
Operational status of and upgrade plan for the 100-MeV proton linac at the Korea multi-purpose accelerator complex
The report presents the operation status of and upgrade plan for the 100-MeV proton linac at the Korea Multi-purpose Accelerator Complex (KOMAC). First, an operation history of the 100-MeV linac since its commissioning in 2013, such as operation hours, user services, machine availabilities, and downtimes, is discussed. Second, the status of the beamlines in service or under development is described in a detailed manner. Finally, the Korea Spallation Neutron Source (KSNS), which is part of the upgrade plan for the 100-MeV proton linac to expand its utilization fields, is discussed.
- 1 February 2022
- Published by Springer Nature in Journal of the Korean Physical Society
- Vol. 80 (8) , 799-807
Open AccessOperational status of and upgrade plan for the 100-MeV proton linac at the Korea multi-purpose accelerator complex
The report presents the operation status of and upgrade plan for the 100-MeV proton linac at the Korea Multi-purpose Accelerator Complex (KOMAC). First, an operation history of the 100-MeV linac since its commissioning in 2013, such as operation hours, user services, machine availabilities, and downtimes, is discussed. Second, the status of the beamlines in service or under development is described in a detailed manner. Finally, the Korea Spallation Neutron Source (KSNS), which is part of the upgrade plan for the 100-MeV proton linac to expand its utilization fields, is discussed.
- Open Access
- 13 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 14 (1) , 1-6
Thermal Reflow Effect in Multi-Mode Waveguide of S-Bend Resonator With Mode Discrimination
Polymer-based S-bend optical resonator consisting of multi-mode waveguide has been used as refractive index sensing devices due to their cost-effectiveness and ease of fabrication. However, during fabrication, the thermal reflow that occurs during the baking process and overdevelopment induces an inclination in the sidewalls of the waveguide. The construction of the angled sidewalls can influence the propagation mode properties of the waveguide, such as the evanescent field and loss. Hence, in this study, we designed and analyzed S-bend resonators to investigate the influence of the sidewall slope on the optical modes of the waveguide and the sensing performance of the resonator with respect to the variation of slope angles. The simulation results revealed that, as the sidewall slope deviated from the right angle (90°–65°), the sensitivity of the device increased by a factor of 1.8 due to the field leakage, whereas, the extinction ratio and Q-factor decreased by 54% and 37%, respectively. The results indicated that the sidewall slope induces a trade-off between the resolution and the sensitivity of the S-bend resonator. The findings of this study can be used as a reference for further research on MMW-based optical sensors using polymer materials.
- 13 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 14 (1) , 1-6
Open AccessThermal Reflow Effect in Multi-Mode Waveguide of S-Bend Resonator With Mode Discrimination
Polymer-based S-bend optical resonator consisting of multi-mode waveguide has been used as refractive index sensing devices due to their cost-effectiveness and ease of fabrication. However, during fabrication, the thermal reflow that occurs during the baking process and overdevelopment induces an inclination in the sidewalls of the waveguide. The construction of the angled sidewalls can influence the propagation mode properties of the waveguide, such as the evanescent field and loss. Hence, in this study, we designed and analyzed S-bend resonators to investigate the influence of the sidewall slope on the optical modes of the waveguide and the sensing performance of the resonator with respect to the variation of slope angles. The simulation results revealed that, as the sidewall slope deviated from the right angle (90°–65°), the sensitivity of the device increased by a factor of 1.8 due to the field leakage, whereas, the extinction ratio and Q-factor decreased by 54% and 37%, respectively. The results indicated that the sidewall slope induces a trade-off between the resolution and the sensitivity of the S-bend resonator. The findings of this study can be used as a reference for further research on MMW-based optical sensors using polymer materials.
- 11 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (9) , 2392-2399
Electrical Analysis Method for Gamma-Ray Imaging System Based on Resistive Network Readout
We present an electrical analysis method for a gamma-ray imaging system based on a resistive network readout. Currently, the array numbers of scintillators and detectors in imaging systems are being increased to enhance the spatial resolution, and resistive network based readout circuits are used to reduce the number of channels. However, a positioning process is required to identify the channel in which the signal has been generated, which causes positional distortion. For position correction, the positioning characteristics must be measured according to the readout circuit conditions. However, owing to the scintillator’s radiation, measurement in a single channel is difficult. In this work, a current pulse is modeled to analyze the positional characteristics of different channels. A current pulse generator and an automatic channel-selection circuit are designed to input signals selectively to each channel. When the input signal duration is 1 μs, the maximum amount of charge generated by the current pulse generator is approximately 1000 pC. Position errors of up to 88.47% are generated, depending on the gain of the preamplifier. Our proposed method can be used for the linearity analysis of preamplifiers and image position correction algorithms.
- 11 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 68 (9) , 2392-2399
Electrical Analysis Method for Gamma-Ray Imaging System Based on Resistive Network Readout
We present an electrical analysis method for a gamma-ray imaging system based on a resistive network readout. Currently, the array numbers of scintillators and detectors in imaging systems are being increased to enhance the spatial resolution, and resistive network based readout circuits are used to reduce the number of channels. However, a positioning process is required to identify the channel in which the signal has been generated, which causes positional distortion. For position correction, the positioning characteristics must be measured according to the readout circuit conditions. However, owing to the scintillator’s radiation, measurement in a single channel is difficult. In this work, a current pulse is modeled to analyze the positional characteristics of different channels. A current pulse generator and an automatic channel-selection circuit are designed to input signals selectively to each channel. When the input signal duration is 1 μs, the maximum amount of charge generated by the current pulse generator is approximately 1000 pC. Position errors of up to 88.47% are generated, depending on the gain of the preamplifier. Our proposed method can be used for the linearity analysis of preamplifiers and image position correction algorithms.
- 28 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (11) , 569-572
Wideband Predistortion Technique With Dual-Parallel Schottky Diodes for Low Power RoF Systems
Radio-over-fiber (RoF)-based front haul architecture has attracted considerable attention for fifth-generation (5G) cellular systems because of its cost effectiveness, however, it is susceptible to harmonic frequency distortion and intermodulation products (IMs) arising from the nonlinearity of the laser diode. To overcome this limitation, an asymmetric electrical predistortion method, using a single Schottky diode with nonlinear characteristics similar to those of a laser diode, was previously proposed. However, its asymmetric structure causes a phase mismatch, which limits the system bandwidth. In this study, we propose an enhanced electrical predistortion technique using dual-parallel Schottky diode blocks. The proposed technique was validated by experiments involving an IM3 drop of approximately 27 dB, and by using identical dual Schottky diode blocks, the phase mismatch in the previously proposed method is completely eliminated. Thus, the applicable bandwidth is extended to 1.8 GHz. This technique can be used to improve the linearity and increase the bandwidth of RoF systems. Additionally, the simple structure is attractive for low-power applications.
- 28 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (11) , 569-572
Wideband Predistortion Technique With Dual-Parallel Schottky Diodes for Low Power RoF Systems
Radio-over-fiber (RoF)-based front haul architecture has attracted considerable attention for fifth-generation (5G) cellular systems because of its cost effectiveness, however, it is susceptible to harmonic frequency distortion and intermodulation products (IMs) arising from the nonlinearity of the laser diode. To overcome this limitation, an asymmetric electrical predistortion method, using a single Schottky diode with nonlinear characteristics similar to those of a laser diode, was previously proposed. However, its asymmetric structure causes a phase mismatch, which limits the system bandwidth. In this study, we propose an enhanced electrical predistortion technique using dual-parallel Schottky diode blocks. The proposed technique was validated by experiments involving an IM3 drop of approximately 27 dB, and by using identical dual Schottky diode blocks, the phase mismatch in the previously proposed method is completely eliminated. Thus, the applicable bandwidth is extended to 1.8 GHz. This technique can be used to improve the linearity and increase the bandwidth of RoF systems. Additionally, the simple structure is attractive for low-power applications.
- 27 January 2020
- Published by Taylor & Francis in Nuclear Technology
- Vol. 206 (7) , 1075-1085
Homography Transformation Correction Method for Position Error Generated in Readout Circuit Based on Resistive Network for the Compton Imaging System
A homography method to correct position errors generated in the Compton imaging system using a resistive network is presented. The Compton imaging system is composed of a scatterer and an absorber in multichannel arrays for high resolution and can detect gamma rays emitted from radioisotopes. Resistive networks are often used in this system to efficiently reduce the number of channels. However, this can cause position errors, and the spatial resolution deteriorates according to the resistance value of the network, type of detector array, and characteristics of the preamplifier used. Therefore, before tracking the position of the source, it is necessary to correct the position errors of images obtained from the scatterer and absorber. Also, a new correction method should consider the characteristics of the readout circuits based on the resistive network. In this work, the position errors are corrected using homography, which is a coordinate transformation method. To verify the corrections using homography transformation, we modeled the current pulse generated from the detector and designed an automatic channel selection circuit to input each channel of the resistive network. From experiments, we first obtained the positions with distortions according to the setup of readout circuits and corrected these errors by applying the homography transformation method. Consequently, the distortions were significantly corrected, and the error rates of the positions compared with those of the ideal grid were greatly reduced by up to 0.36%.
- 27 January 2020
- Published by Taylor & Francis in Nuclear Technology
- Vol. 206 (7) , 1075-1085
Homography Transformation Correction Method for Position Error Generated in Readout Circuit Based on Resistive Network for the Compton Imaging System
A homography method to correct position errors generated in the Compton imaging system using a resistive network is presented. The Compton imaging system is composed of a scatterer and an absorber in multichannel arrays for high resolution and can detect gamma rays emitted from radioisotopes. Resistive networks are often used in this system to efficiently reduce the number of channels. However, this can cause position errors, and the spatial resolution deteriorates according to the resistance value of the network, type of detector array, and characteristics of the preamplifier used. Therefore, before tracking the position of the source, it is necessary to correct the position errors of images obtained from the scatterer and absorber. Also, a new correction method should consider the characteristics of the readout circuits based on the resistive network. In this work, the position errors are corrected using homography, which is a coordinate transformation method. To verify the corrections using homography transformation, we modeled the current pulse generated from the detector and designed an automatic channel selection circuit to input each channel of the resistive network. From experiments, we first obtained the positions with distortions according to the setup of readout circuits and corrected these errors by applying the homography transformation method. Consequently, the distortions were significantly corrected, and the error rates of the positions compared with those of the ideal grid were greatly reduced by up to 0.36%.
- Open Access
Novel S-Bend Resonator Based on a Multi-Mode Waveguide with Mode Discrimination for a Refractive Index Sensor
In this paper, a multi-mode waveguide-based optical resonator is proposed for an integrated optical refractive index sensor. Conventional optical resonators have been studied for single-mode waveguide-based resonators to enhance the performance, but mass production is limited owing to the high fabrication costs of nano-scale structures. To overcome this problem, we designed an S-bend resonator based on a micro-scale multi-mode waveguide. In general, multi-mode waveguides cannot be utilized as optical resonators, because of a performance degradation resulting from modal dispersion and an output transmission with multi-peaks. Therefore, we exploited the mode discrimination phenomenon using the bending loss, and the resulting S-bend resonator yielded an output transmission without multi-peaks. This phenomenon is utilized to remove higher-order modes efficiently using the difference in the effective refractive index between the higher-order and fundamental modes. As a result, the resonator achieved a Q-factor and sensitivity of 2.3 103 and 52 nm/RIU, respectively, using the variational finite-difference time-domain method. These results show that the multi-mode waveguide-based S-bend resonator with a wide line width can be utilized as a refractive index sensor.Open AccessNovel S-Bend Resonator Based on a Multi-Mode Waveguide with Mode Discrimination for a Refractive Index Sensor
In this paper, a multi-mode waveguide-based optical resonator is proposed for an integrated optical refractive index sensor. Conventional optical resonators have been studied for single-mode waveguide-based resonators to enhance the performance, but mass production is limited owing to the high fabrication costs of nano-scale structures. To overcome this problem, we designed an S-bend resonator based on a micro-scale multi-mode waveguide. In general, multi-mode waveguides cannot be utilized as optical resonators, because of a performance degradation resulting from modal dispersion and an output transmission with multi-peaks. Therefore, we exploited the mode discrimination phenomenon using the bending loss, and the resulting S-bend resonator yielded an output transmission without multi-peaks. This phenomenon is utilized to remove higher-order modes efficiently using the difference in the effective refractive index between the higher-order and fundamental modes. As a result, the resonator achieved a Q-factor and sensitivity of 2.3 103 and 52 nm/RIU, respectively, using the variational finite-difference time-domain method. These results show that the multi-mode waveguide-based S-bend resonator with a wide line width can be utilized as a refractive index sensor. - 4 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10921, 56
Analysis of regular polygonal ring resonator based on multi-mode waveguide
We analyzed regular polygonal ring resonators based on multi-mode waveguide using finite-difference time-domain simulation. It consists of the regular polygonal ring waveguide, total internal reflection mirror, and MMI coupler. In general, multi-mode waveguide-based resonator is difficult to use as sensors because of poor output characteristics. By using the low reflectance of the higher-order mode compared to the fundamental mode in the TIR mirror, we designed a regular polygonal ring resonator that can be used as sensors even when a multi-mode waveguide is used instead of a single-mode waveguide. In fabrication, the multi-mode waveguide has a wider line width than the single-mode waveguide, which reduces the process cost and enables mass production. The width and height of the multi-mode waveguide are designed to be 2.5 μm and 2 μm, respectively using SU-8 polymer. The regular hexagon ring resonator shows the highest Q-factor of 1.03×104 among the various regular polygonal ring resonators.
- 4 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10921, 56
Analysis of regular polygonal ring resonator based on multi-mode waveguide
We analyzed regular polygonal ring resonators based on multi-mode waveguide using finite-difference time-domain simulation. It consists of the regular polygonal ring waveguide, total internal reflection mirror, and MMI coupler. In general, multi-mode waveguide-based resonator is difficult to use as sensors because of poor output characteristics. By using the low reflectance of the higher-order mode compared to the fundamental mode in the TIR mirror, we designed a regular polygonal ring resonator that can be used as sensors even when a multi-mode waveguide is used instead of a single-mode waveguide. In fabrication, the multi-mode waveguide has a wider line width than the single-mode waveguide, which reduces the process cost and enables mass production. The width and height of the multi-mode waveguide are designed to be 2.5 μm and 2 μm, respectively using SU-8 polymer. The regular hexagon ring resonator shows the highest Q-factor of 1.03×104 among the various regular polygonal ring resonators.