MGMonica Gehrig

Monica Gehrig

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Monica Gehrig has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fusion Enabling Technology Educational and Research Programs in the United States

    by Lane B. Carasik, Monica Gehrig, Subash L. Sharma, Dhananjay K. Ravikumar

  • Simulation of Channel Flow with Square Ribs for Blanket First-Wall Cooling: Geometry-Specific Tuning of k-ω Model Using Adjoint Method

    by Ying Xu, Cody Wiggins, Monica Gehrig

    I. Helium cooling provides significant safety advantages in the fusion blanket first wall (FW) because it is chemically inert, nonradioactive, transparent to neutrons, and compatible with safety sy...

  • Industry-Driven Training and Curriculum Development Process

    by Monica Gehrig, Matthias Knolker, Arnold Lumsdaine, Lane Carasik, A. Louise Ferris


  • Preliminary Assessment of Additively Manufactured Cooling Channel Performance for Helium-Cooled Blanket Concepts

    by Cody S. Wiggins, Chris Crawford, Monica L. Gehrig, Charles Kessel, Chase Joslin

    Sufficient cooling of the blanket first wall remains a critical challenge for the design and deployment of fusion power plants. Helium has been targeted as a potential blanket coolant due to its inertness and low neutron interactivity, among other advantages. However, the low thermal mass of helium creates a need for heat transfer enhancements in coolant channels to provide adequate cooling to the blanket’s first wall. Toward this end, a series of ribbed flow channels of various rib cross sections and configurations has been produced via additive manufacturing (AM) to study the efficacy of AM for first wall heat transfer enhancement and the optimization of heat transfer geometries. Helium cooling performance is studied in AM test articles at 4 MPa operating pressure, Reynolds numbers up to 197 000, and outer surface heat fluxes up to 42 kW/m $^{2}$ in the recently commissioned helium flow loop experiment (HFLE). Preliminary results of this study are presented herein. Heat transfer performance of nominally smooth (i.e., featureless) AM channels is quantified via measured Nusselt numbers and friction factors and compared to off-the-shelf smooth pipe experiments. Results are compared to existing correlations and used to discuss the effects of the AM processes on thermal-hydraulic performance. It is seen that the inherent roughness of the AM channels leads to an increase in both heat transfer coefficient and pressure drop when compared to the conventional pipe. Recommendations are made for future studies based on these findings and additional considerations for the deployment of AM blanket cooling components.


  • Assessment of 1-D Channel Flow Models for Tritium Breeding Blanket Cooling

    by Monica L. Gehrig, Paul W. Humrickhouse

    As the push for the design and construction of a fusion pilot plant in the U.S. continues, the demand for improved tools and techniques that aid this process increases. Reliable and rapid integrated simulations of neutronics, heat transfer, fluid flow, and other phenomena occurring in fusion reactors are necessary to aid in the efficient design of these complicated systems. Computational fluid dynamic (CFD) simulations can be a computationally expensive part of such simulations, and 1-D “thermal hydraulic” models can greatly reduce this expense; the use of integrated modeling frameworks such as the Multiphysics Object-Oriented Simulation Environment (MOOSE) can facilitate coupling of these simplified fluid models to fully detailed 3-D structures. Such a “hybrid fidelity” approach can accelerate the design process but requires suitable closures for friction and heat transfer in the 1-D fluid model. This work aims to evaluate the accuracy of such closures in the MOOSE thermal hydraulics module (THM) by comparing these directly to 3-D CFD models built using Simcenter STAR-CCM $+$ . Channel geometries and conditions representative of the fusion nuclear science facility (FNSF) are considered, including those with radial/toroidal and poloidal orientations, and with bends. In both models, prototypic surface and volumetric heating conditions are applied to steady-state helium flows with ideal gas properties at 8 MPa. Quantities from the THM and CFD simulations, such as Nusselt number and limiting temperatures, are compared to each other, existing correlations, and literature in assessing the validity of the 1-D models.


  • CFD Simulation of Helium Flow Loop Test Section

    by Monica Gehrig, Joshua Schlegel, Dennis Youchison, Arnold Lumsdaine, Charles Kessel, Gary Mueller

    A helium flow loop is being assembled at Oak Ridge National Laboratory to analyze heat transfer enhancement for systems such as blanket and divertor components. To efficiently identify optimum geometries for heat transfer enhancement in these applications, simulation work is performed to optimize test section designs that are built and tested in the helium flow loop that operates at 4 MPa and a mass flow rate of 100 g/s. Different ribbed geometries that examine rib shape, rib height, rib orientation, rib spacing, and three-dimensional orientation are modeled and simulated in STAR-CCM+ to compare their ability to remove heat and mitigate pressure drop. Following the simulations, models are selected and manufactured for the helium flow loop tests. Simulations initially focus on a hydrodynamic study to determine the appropriate mesh and physics models and then add a heat flux to analyze the heat transfer abilities of the models. The simulations are run in steady state and use a Reynolds-averaged Navier-Stokes k-ε turbulence model. The helium is modeled as an ideal gas. The simulation explores models of geometries that enhance the heat transfer and decrease pressure drop with an overall goal of increasing fluid collision with the wall. Enhanced geometries are simulated to select appropriate designs for manufacturing, and preliminary experimental results are used to validate the simulations. The factors that are being analyzed in the comparison between the experimental and the simulated results include matching thermocouple temperatures, pressure drop, roughness, and fluid velocity.


  • Transient Computational and Experimental Thermal Analysis of Graphite Foam Monoblock

    by Monica Gehrig, Dennis Youchison, Arnold Lumsdaine, Henri Greuner, Bernd Boswirth, James Klett, Ralph Dinwiddie

    A densified graphite foam is being explored for its applicability as plasma-facing material in fusion devices. Three different graphite foam monoblocks are constructed and tested in the Garching Large Divertor Sample Testing Facility. The monoblock samples consist of graphite foam press-fit to a single tube, graphite foam cubes brazed to a single, and graphite foam cubes press-fit to a single tube. The tube is composed of CuCrZr with a steel twisted tape. The monoblocks are exposed to the heat fluxes of 5, 6, and 8 MW/m 2 for 30 s to determine the maximum surface and body temperatures measured with thermocouple for each monoblock design. The press-fit monoblocks are exposed to 8 MW/m 2 for 15 s for 100 cycles to determine the effect of thermal cycling on the contact between the graphite foam and the tube. STAR-CCM+ is used to predict how much the contact between the foam and tubes varies as a result of thermal cycling. In addition, the 6 MW/m 2 loading is modeled in STAR-CCM+ to compare the transient cooldown curves of the computational results to the recorded temperatures at the surface and two different thermocouple locations. This comparison is used to validate the temperature-dependent thermal conductivity and specific heat capacity used in the models of the graphite foam. The computational modeling of the experiment has been used to hypothesize ways to use and improve upon the graphite foam as a suitable material for fusion applications.