Yurii Dobryshkin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yurii Dobryshkin has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- I. Lappo
Державний науково-дослідний інститут випробувань і сертифікації озброєння та військової техніки, м. Чернігів
7 shared publications - M. Herashchenko3 shared publications
- Vladlen Kuznetsov
Державний науково-дослідний інститут випробувань і сертифікації озброєння та військової техніки
3 shared publications - О.в. Червотока
State Scientific Research Institute of Armament and Military Equipment Testing and Certification, Cherkasy, Ukraine
3 shared publications - S. Prykhodko2 shared publications
- Hennadii Khudov
Ivan Kozhedub Kharkiv National Air Force University
1 shared publication
Latest Publications
- Open Access
- 29 April 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (9 (122)) , 6-15
Improving a method for segmenting optical-electronic images acquired from space observation systems based on the firefly algorithm
The object of research is the process of segmentation of optoelectronic images acquired from space observation systems. The method of segmentation of optoelectronic images acquired from space observation systems based on the firefly algorithm, unlike known ones, involves the following: – the pre-selection of brightness channels of the Red-Green-Blue color space in the original image; – calculation of the level of luminosity for each firefly; – assigning each firefly with the neighboring firefly, within a certain radius, whose level of luminosity is higher than the natural level of luminosity of the firefly; – determination of the coordinate of the updated position of the firefly in each brightness channel. An experimental study into the segmentation of optoelectronic images acquired from space observation systems based on the firefly algorithm was carried out. It is established that the improved segmentation method based on the firefly algorithm allows for the segmentation of optoelectronic images acquired from space observation systems. The quality of segmentation of optoelectronic images by the method based on the firefly algorithm was evaluated in comparison with methods based on the particle swarm algorithm and the Sine-Cosine algorithm. It was found that the improved method based on the firefly algorithm reduces the segmentation error of the first kind by an average of 11 % and the segmentation error of the second kind by an average of 9 %. This becomes possible by using the firefly algorithm. Methods of image segmentation can be implemented in software and hardware systems for processing optoelectronic images acquired from space surveillance systems. Further studies may focus on comparing the quality of segmentation method based on the firefly algorithm with segmentation methods based on genetic algorithms.
- 29 April 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (9 (122)) , 6-15
Open AccessImproving a method for segmenting optical-electronic images acquired from space observation systems based on the firefly algorithm
The object of research is the process of segmentation of optoelectronic images acquired from space observation systems. The method of segmentation of optoelectronic images acquired from space observation systems based on the firefly algorithm, unlike known ones, involves the following: – the pre-selection of brightness channels of the Red-Green-Blue color space in the original image; – calculation of the level of luminosity for each firefly; – assigning each firefly with the neighboring firefly, within a certain radius, whose level of luminosity is higher than the natural level of luminosity of the firefly; – determination of the coordinate of the updated position of the firefly in each brightness channel. An experimental study into the segmentation of optoelectronic images acquired from space observation systems based on the firefly algorithm was carried out. It is established that the improved segmentation method based on the firefly algorithm allows for the segmentation of optoelectronic images acquired from space observation systems. The quality of segmentation of optoelectronic images by the method based on the firefly algorithm was evaluated in comparison with methods based on the particle swarm algorithm and the Sine-Cosine algorithm. It was found that the improved method based on the firefly algorithm reduces the segmentation error of the first kind by an average of 11 % and the segmentation error of the second kind by an average of 9 %. This becomes possible by using the firefly algorithm. Methods of image segmentation can be implemented in software and hardware systems for processing optoelectronic images acquired from space surveillance systems. Further studies may focus on comparing the quality of segmentation method based on the firefly algorithm with segmentation methods based on genetic algorithms.
- Open Access
- 12 April 2023
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 15 (1) , 74-80
MINE ACTION CENTER: MAIN ASPECTS OF ACTIVITY AND DEVELOPMENT PROSPECTS
Statement of the Problem. Ukraine is one of the ten countries with the most explosive contaminated territory, and this situation tends to worsen due to the scale of military operations and the use of so-called “mine warfare” tactics. Therefore, the сreation of an effective mine action system, taking into account the needs of safe demining of the territory of Ukraine from explosive objects, is a priority task at the national level. Analysis of recent research and publications. The analysis of professional literature has shown that the issues of creating an effective mine action system, improving the regulatory framework based on international experience, problems and ways to solve humanitarian demining, and the impact of explosive hazards on the environment are in the focus of attention of the scientific community. The issue of development and improvement of the mine action system has become even more urgent and requires further development taking into account the principles of international humanitarian law and measures to minimize the danger caused by explosive hazards. The purpose of the article is to study the activities and identify promising ways of development of the Center for Mine Action in the conditions of the legal regime of martial law. In Ukraine there is an effective mine action system with clear subordination to the National Mine Action Agency. In order to implement mine action measures in practice, the Mine Action Center was established, which has an effective mine clearance quality management system, including certification of mine action operators (Certification Agency) and control of demining quality (Inspection Agency). Within the framework of international cooperation, joint projects are implemented with foreign countries, international organizations and institutions, in which the Mine Action Center is an active participant. A system of training and advanced training of the Mine Action Center’s personnel involved in demining has been implemented. Promising ways of developing mine action within the competence of the Mine Action Center include the following: expanding the scope of accreditation of the Certification Agency; improvement of normative and legal acts of mine countermeasures (amendments to existing ones and creation of new ones); increasing the effectiveness of mine action tasks by conducting applied and fundamental research within the authority of the scientific research laboratory.
- 12 April 2023
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 15 (1) , 74-80
Open AccessMINE ACTION CENTER: MAIN ASPECTS OF ACTIVITY AND DEVELOPMENT PROSPECTS
Statement of the Problem. Ukraine is one of the ten countries with the most explosive contaminated territory, and this situation tends to worsen due to the scale of military operations and the use of so-called “mine warfare” tactics. Therefore, the сreation of an effective mine action system, taking into account the needs of safe demining of the territory of Ukraine from explosive objects, is a priority task at the national level. Analysis of recent research and publications. The analysis of professional literature has shown that the issues of creating an effective mine action system, improving the regulatory framework based on international experience, problems and ways to solve humanitarian demining, and the impact of explosive hazards on the environment are in the focus of attention of the scientific community. The issue of development and improvement of the mine action system has become even more urgent and requires further development taking into account the principles of international humanitarian law and measures to minimize the danger caused by explosive hazards. The purpose of the article is to study the activities and identify promising ways of development of the Center for Mine Action in the conditions of the legal regime of martial law. In Ukraine there is an effective mine action system with clear subordination to the National Mine Action Agency. In order to implement mine action measures in practice, the Mine Action Center was established, which has an effective mine clearance quality management system, including certification of mine action operators (Certification Agency) and control of demining quality (Inspection Agency). Within the framework of international cooperation, joint projects are implemented with foreign countries, international organizations and institutions, in which the Mine Action Center is an active participant. A system of training and advanced training of the Mine Action Center’s personnel involved in demining has been implemented. Promising ways of developing mine action within the competence of the Mine Action Center include the following: expanding the scope of accreditation of the Certification Agency; improvement of normative and legal acts of mine countermeasures (amendments to existing ones and creation of new ones); increasing the effectiveness of mine action tasks by conducting applied and fundamental research within the authority of the scientific research laboratory.
- 3 February 2023
- Published by Springer Nature
- p. 102-114
Research and Implementation Directions of the Fast ReRoute Facility Backup Scheme in Programmable Networks
- 3 February 2023
- Published by Springer Nature
- p. 102-114
Research and Implementation Directions of the Fast ReRoute Facility Backup Scheme in Programmable Networks
- 20 October 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 12 (3) , 129-135
DEVELOPING GENERAL REQUIREMENTS FOR A VARIABLE VOLUME CLIMATIC CHAMBER
Аналіз стандартів України, гармонізованих зі стандартами НАТО, показав, що під час випробувань озброєння та військової техніки, в тому числі бронетанкової та автомобільної техніки, виникає необхідність проведення перевірок на вплив кліматичних факторів. Одними із видів перевірок на вплив кліматичних факторів є визначення стійкості до впливу: підвищеної температури, пониженої температури, підвищеної вологості. На сьогоднішній день в Збройних Силах Україні відсутні засоби вимірювань та випробувань для оцінки зразків бронетанкової та автомобільної техніки на вплив зазначених кліматичних характеристик. Створення кліматичної камери змінного об’єму на основі розроблених загальних вимог дозволить отримувати кількісні значення характеристик, які підлягають оцінюванню під час випробувань.
- 20 October 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 12 (3) , 129-135
DEVELOPING GENERAL REQUIREMENTS FOR A VARIABLE VOLUME CLIMATIC CHAMBER
Аналіз стандартів України, гармонізованих зі стандартами НАТО, показав, що під час випробувань озброєння та військової техніки, в тому числі бронетанкової та автомобільної техніки, виникає необхідність проведення перевірок на вплив кліматичних факторів. Одними із видів перевірок на вплив кліматичних факторів є визначення стійкості до впливу: підвищеної температури, пониженої температури, підвищеної вологості. На сьогоднішній день в Збройних Силах Україні відсутні засоби вимірювань та випробувань для оцінки зразків бронетанкової та автомобільної техніки на вплив зазначених кліматичних характеристик. Створення кліматичної камери змінного об’єму на основі розроблених загальних вимог дозволить отримувати кількісні значення характеристик, які підлягають оцінюванню під час випробувань.
- 5 July 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 12,p. 77-83
FEATURES OF LABORATORY TESTING OF ARMORED VEHICLES AND AUTOMOTIVE EQUIPMENT AGAINST EXTERNAL MECHANICAL AND CLIMATIC FACTORS
У статті проведено порівняння існуючих в Україні та в провідних країнах світу нормативних документів та методичний апарату проведення випробувань зразків бронетанкової та автомобільної техніки щодо впливу зовнішніх механічних і кліматичних факторів. Здійснено порівняння методів випробувань зразків бронетанкової та автомобільної техніки на вплив зовнішніх механічних і кліматичних факторів, а також визначено основні види випробувань. Практична реалізація отриманих в статті результатів полягає в можливості їх застосуванні під час розробки програм і методик лабораторних випробувань зразків бронетанкової та автомобільної техніки.
- 5 July 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 12,p. 77-83
FEATURES OF LABORATORY TESTING OF ARMORED VEHICLES AND AUTOMOTIVE EQUIPMENT AGAINST EXTERNAL MECHANICAL AND CLIMATIC FACTORS
У статті проведено порівняння існуючих в Україні та в провідних країнах світу нормативних документів та методичний апарату проведення випробувань зразків бронетанкової та автомобільної техніки щодо впливу зовнішніх механічних і кліматичних факторів. Здійснено порівняння методів випробувань зразків бронетанкової та автомобільної техніки на вплив зовнішніх механічних і кліматичних факторів, а також визначено основні види випробувань. Практична реалізація отриманих в статті результатів полягає в можливості їх застосуванні під час розробки програм і методик лабораторних випробувань зразків бронетанкової та автомобільної техніки.
- Open Access
- 30 December 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 87,p. 14-21
Recommendations for Implementation of Data Flow Control Method Based on Different Priorities in Stationary Component of Communication System of Armed Forces of Ukraine
Relevance. The task of increasing the productivity of the communication system stationary component of the Armed Forces of Ukraine requires the introduction of appropriate new methods for controlling the data flow of different priorities, which should be further implemented in modern routing protocols in accordance with the concept of next generation networks.Method. The method of data flow control based on different priorities in the communication system stationary component of the Armed Forces of Ukraine is investigated. The aforementioned method consists of the following stages: monitoring and analysis of initial data; formation of the required parameters vector; formation of metrics for the use of network resources; statement of the mathematical optimization problem; solution of the optimization problem. Within the framework of the method, the coordinated solution of the problems of multipath routing and adaptive limitation of the flow rate at the border of the information and telecommunication network is provided on the basis of different priorities.Results. The method on a specific example of the network structure using the ''Optimization Toolbox'' of the Matlab software package is studied in the article. Practical recommendations are developed for the practical implementation of the method in the stationary component of the communication system of the Armed Forces of Ukraine. Conclusions. Based on the simulation results, it is established that the method implementation in modern technological solutions increases the productivity of the information and telecommunication network by an average of (10-20) %, and the quality of service with the probability of packet delivery by (1-3) %. The proposed method meets the requirements of the Traffic Engineering data flow control concept. It is noted that in order to validate the adequacy and reliability of the improved method in the future, it is necessary to conduct a full-scale experiment on real network equipment.
- 30 December 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Visnyk NTUU KPI Seriia - Radiotekhnika Radioaparatobuduvannia
- No. 87,p. 14-21
Open AccessRecommendations for Implementation of Data Flow Control Method Based on Different Priorities in Stationary Component of Communication System of Armed Forces of Ukraine
Relevance. The task of increasing the productivity of the communication system stationary component of the Armed Forces of Ukraine requires the introduction of appropriate new methods for controlling the data flow of different priorities, which should be further implemented in modern routing protocols in accordance with the concept of next generation networks.Method. The method of data flow control based on different priorities in the communication system stationary component of the Armed Forces of Ukraine is investigated. The aforementioned method consists of the following stages: monitoring and analysis of initial data; formation of the required parameters vector; formation of metrics for the use of network resources; statement of the mathematical optimization problem; solution of the optimization problem. Within the framework of the method, the coordinated solution of the problems of multipath routing and adaptive limitation of the flow rate at the border of the information and telecommunication network is provided on the basis of different priorities.Results. The method on a specific example of the network structure using the ''Optimization Toolbox'' of the Matlab software package is studied in the article. Practical recommendations are developed for the practical implementation of the method in the stationary component of the communication system of the Armed Forces of Ukraine. Conclusions. Based on the simulation results, it is established that the method implementation in modern technological solutions increases the productivity of the information and telecommunication network by an average of (10-20) %, and the quality of service with the probability of packet delivery by (1-3) %. The proposed method meets the requirements of the Traffic Engineering data flow control concept. It is noted that in order to validate the adequacy and reliability of the improved method in the future, it is necessary to conduct a full-scale experiment on real network equipment.
- 29 June 2021
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 8,p. 56-62
RECOMMENDATIONS FOR EQUIPPING THE PROVING GROUND F OR TESTING ARMORED AND AUTOMOTIVE VEHICLES
Постановка проблеми. Оснащення Збройних Сил України новітніми зразками озброєння та військової техніки, в тому числі бронетанковою та автомобільною технікою, призводить до необхідності створення відповідного випробувального полігону: розбудови об’єктів інфраструктури, оснащення засобами та обладнанням для лабораторних випробувань а також засобами для контролю працездатності та визначення технічного стану озброєння та військової техніки. Аналіз останніх досліджень і публікацій. В існуючих публікаціях, на жаль, відсутні рекомендації щодо оснащення полігону для випробувань бронетанкової та автомобільної техніки. У статті визначенні основні завдання полігону, запропоновано доцільний склад його елементів та загальні вимоги до них, а також пропозиції щодо його оснащення лабораторно-випробувальним обладнанням. Для вирішення зазначених завдань до складу полігону повинні входити такі основні об’єкти та системи: ділянка з перевірки бронетанкової та автомобільної техніки для експериментального визначення показників прохідності, маневреності, динамічних якостей, транспортабельності зразків БТАТ, а також для проведення випробувань зразків на стійкість до впливу зовнішніх факторів навколишнього середовища; майданчик для перевірки зразків бронетанкової та автомобільної техніки на живучість; комплекс доріг загального користування, спеціальних випробувальних доріг; спеціальні об’єкти для розміщення лабораторно- випробувального обладнання; інженерні мережі для забезпечення випробувань та життєдіяльності (електропостачання, водопостачання та інше); системи метрологічного, метеорологічного, протипожежного та медичного забезпечення, забезпечення екологічної безпеки; система захисту від зброї масового ураження та біологічного захисту, система охорони. Висновки. Створення полігону для випробувань бронетанкової та автомобільної техніки дозволить забезпечити: набуття спроможності випробувальної бази ЗС України щодо оцінки перспективних зразків бронетанкової та автомобільної техніки; підвищення досягнутого рівня контролю за технічним станом озброєння та військової техніки під час проведення випробувань; оцінку результатів заходів бойової підготовки з бойовим застосуванням озброєння та військової техніки; акредитацію полігону для випробувань озброєння та військової техніки у національних та міжнародних органах оцінки відповідності та сертифікації на право проведення робіт відповідно стандартів НАТО.
- 29 June 2021
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 8,p. 56-62
RECOMMENDATIONS FOR EQUIPPING THE PROVING GROUND F OR TESTING ARMORED AND AUTOMOTIVE VEHICLES
Постановка проблеми. Оснащення Збройних Сил України новітніми зразками озброєння та військової техніки, в тому числі бронетанковою та автомобільною технікою, призводить до необхідності створення відповідного випробувального полігону: розбудови об’єктів інфраструктури, оснащення засобами та обладнанням для лабораторних випробувань а також засобами для контролю працездатності та визначення технічного стану озброєння та військової техніки. Аналіз останніх досліджень і публікацій. В існуючих публікаціях, на жаль, відсутні рекомендації щодо оснащення полігону для випробувань бронетанкової та автомобільної техніки. У статті визначенні основні завдання полігону, запропоновано доцільний склад його елементів та загальні вимоги до них, а також пропозиції щодо його оснащення лабораторно-випробувальним обладнанням. Для вирішення зазначених завдань до складу полігону повинні входити такі основні об’єкти та системи: ділянка з перевірки бронетанкової та автомобільної техніки для експериментального визначення показників прохідності, маневреності, динамічних якостей, транспортабельності зразків БТАТ, а також для проведення випробувань зразків на стійкість до впливу зовнішніх факторів навколишнього середовища; майданчик для перевірки зразків бронетанкової та автомобільної техніки на живучість; комплекс доріг загального користування, спеціальних випробувальних доріг; спеціальні об’єкти для розміщення лабораторно- випробувального обладнання; інженерні мережі для забезпечення випробувань та життєдіяльності (електропостачання, водопостачання та інше); системи метрологічного, метеорологічного, протипожежного та медичного забезпечення, забезпечення екологічної безпеки; система захисту від зброї масового ураження та біологічного захисту, система охорони. Висновки. Створення полігону для випробувань бронетанкової та автомобільної техніки дозволить забезпечити: набуття спроможності випробувальної бази ЗС України щодо оцінки перспективних зразків бронетанкової та автомобільної техніки; підвищення досягнутого рівня контролю за технічним станом озброєння та військової техніки під час проведення випробувань; оцінку результатів заходів бойової підготовки з бойовим застосуванням озброєння та військової техніки; акредитацію полігону для випробувань озброєння та військової техніки у національних та міжнародних органах оцінки відповідності та сертифікації на право проведення робіт відповідно стандартів НАТО.
- 30 December 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 6,p. 81-86
DEVELOPMENT OF THE GENERAL REQUIREMENTS FOR THERMAL PRESSURE CHAMBER
Inspection of armament and military equipment (AME) for the quality of manufacture and purpose tasks performance is carried out exclusively through testing. Tasks of conducting tests within the framework of ensuring the implementation of State programs for equipping the Armed Forces of Ukraine with modern armament and military equipment require proper instrumentation of the laboratory and test base of the Armed Forces of Ukraine, which is necessary to determine during tests numerical indicators of technical and operational characteristics in accordance with requirements of state standards parallel to standards of world’s major economies to evaluate new, upgraded armament, armament with service life extension and procured armament. During the study, general scientific methods of information processing and systematization were used, in particular system analysis and synthesis of organizational and technical systems. The purpose of the article is to improve the quality of testing of new and modernized pieces of AME by developing general requirements for a thermal pressure chamber. A study was conducted to substantiate the composition of the thermal pressure chamber, its main tasks, objects of action, capabilities, conditions of application, requirements for interaction with control systems or other objects with which the system is combined. Based on the analysis, the article proposes general requirements for a thermal pressure chamber, which will improve the quality of testing of new and upgraded pieces of AME; reduce material and technical expenditures and reduce the time of AME testing.
- 30 December 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 6,p. 81-86
DEVELOPMENT OF THE GENERAL REQUIREMENTS FOR THERMAL PRESSURE CHAMBER
Inspection of armament and military equipment (AME) for the quality of manufacture and purpose tasks performance is carried out exclusively through testing. Tasks of conducting tests within the framework of ensuring the implementation of State programs for equipping the Armed Forces of Ukraine with modern armament and military equipment require proper instrumentation of the laboratory and test base of the Armed Forces of Ukraine, which is necessary to determine during tests numerical indicators of technical and operational characteristics in accordance with requirements of state standards parallel to standards of world’s major economies to evaluate new, upgraded armament, armament with service life extension and procured armament. During the study, general scientific methods of information processing and systematization were used, in particular system analysis and synthesis of organizational and technical systems. The purpose of the article is to improve the quality of testing of new and modernized pieces of AME by developing general requirements for a thermal pressure chamber. A study was conducted to substantiate the composition of the thermal pressure chamber, its main tasks, objects of action, capabilities, conditions of application, requirements for interaction with control systems or other objects with which the system is combined. Based on the analysis, the article proposes general requirements for a thermal pressure chamber, which will improve the quality of testing of new and upgraded pieces of AME; reduce material and technical expenditures and reduce the time of AME testing.
- 19 August 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 4,p. 28-33
DEVELOPMENT OF A DATA FLOW CONTROL METHOD IN THE STATIONARY COMPONENT OF THE AIR FORCE COMMUNICATION SYSTEM OF THE ARMED FORCES OF UKRAINE
Стаття присвячена розв’язанню актуальної наукової задачі, яка полягає в удосконаленні засобів управління потоком в умовах узгодженої реалізації багатошляхових стратегій маршрутизації і превентивного обмеження інтенсивності трафіка, що надходить до транспортної мережі, на основі вдосконалення методу управління потоком в стаціонарній компоненті системи зв’язку Повітряних Сил з метою підвищення її продуктивності. У роботі проаналізовано розглянуту задачу та показано, що важливе місце в сучасних та перспективних телекомунікаційних мережах, які розвиваються у напрямку створення мереж наступного покоління NGN, відводиться засобам управління потоком як усередині транспортної мережі, так і на етапі доступу до неї. Розв’язанням даної задачі є вдосконалення математичних моделей управління потоком, що покладені в основу сучасних технологічних рішень. У роботі запропоновано метод управління потоком, у рамках якого забезпечується узгоджене розв’язання задач багатошляхової маршрутизації і превентивного обмеження інтенсивності потоку на основі як відносних, так і абсолютних пріоритетів. Для забезпечення більш справедливого обслуговування в роботі запропонована модель управління трафіком на основі відносних пріоритетів. Практична реалізація результатів роботи передбачає проведення комплексу організаційно-технічних заходів, які стосуються принципів організаційного, технологічного та алгоритмічного характеру, що дозволить підвищити продуктивність стаціонарної компоненти системи зв’язку Повітряних Сил Збройних Сил України.
- 19 August 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 4,p. 28-33
DEVELOPMENT OF A DATA FLOW CONTROL METHOD IN THE STATIONARY COMPONENT OF THE AIR FORCE COMMUNICATION SYSTEM OF THE ARMED FORCES OF UKRAINE
Стаття присвячена розв’язанню актуальної наукової задачі, яка полягає в удосконаленні засобів управління потоком в умовах узгодженої реалізації багатошляхових стратегій маршрутизації і превентивного обмеження інтенсивності трафіка, що надходить до транспортної мережі, на основі вдосконалення методу управління потоком в стаціонарній компоненті системи зв’язку Повітряних Сил з метою підвищення її продуктивності. У роботі проаналізовано розглянуту задачу та показано, що важливе місце в сучасних та перспективних телекомунікаційних мережах, які розвиваються у напрямку створення мереж наступного покоління NGN, відводиться засобам управління потоком як усередині транспортної мережі, так і на етапі доступу до неї. Розв’язанням даної задачі є вдосконалення математичних моделей управління потоком, що покладені в основу сучасних технологічних рішень. У роботі запропоновано метод управління потоком, у рамках якого забезпечується узгоджене розв’язання задач багатошляхової маршрутизації і превентивного обмеження інтенсивності потоку на основі як відносних, так і абсолютних пріоритетів. Для забезпечення більш справедливого обслуговування в роботі запропонована модель управління трафіком на основі відносних пріоритетів. Практична реалізація результатів роботи передбачає проведення комплексу організаційно-технічних заходів, які стосуються принципів організаційного, технологічного та алгоритмічного характеру, що дозволить підвищити продуктивність стаціонарної компоненти системи зв’язку Повітряних Сил Збройних Сил України.
- 28 May 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3,p. 67-76
PERSPECTIVE WAYS OF DEVELOPMENT OF THE LABORATORY TESTING FACILITIES OF THE ARMED FORCES OF UKRAINE
Світова практика створення, модернізації зразків озброєння та військової техніки передбачає проведення у процесі їх життєвого циклу, багаточисельних випробувань, перевірок та оцінок поточного технічного стану. Завдання організації та проведення випробувань, зокрема механічних, електричних та кліматичних, у Державному науково-дослідному інституті випробувань і сертифікації озброєння та військової техніки покладене на науково-дослідну лабораторію, що входить до складу науково-технічного комплексу вимірювань. На сьогоднішній день лабораторія обладнана не в повному обсязі сучасним випробувальним обладнанням. Тому гостро постає завдання щодо обґрунтування шляхів розвитку та забезпечення науково-дослідної лабораторії випробувальним обладнанням для проведення механічних, електричних та кліматичних випробувань зразків озброєння та військової техніки. Метою статті є визначення перспективних шляхів розвитку лабораторно-випробувальної бази Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки з врахуванням сучасного розвитку зразків озброєння та військової техніки. Під час проведення дослідження були застосовані загальнонаукові методи обробки та систематизації інформації, зокрема системний аналіз та синтез організаційно-технічних систем. Проведено аналіз особливостей організації та проведення механічних, електричних та кліматичних випробувань на підприємствах оборонно-промислового комплексу України. Встановлено, що основою випробувань, окрім законодавчих актів та нормативно-технічних документів, є наявність сучасної лабораторно-випробувальної бази, оскільки без засобів вимірювань та випробувань неможливо переконатися в стійкості, міцності та тривкості зразків озброєння та військової техніки до впливу зовнішніх чинників. Наведено пропозиції щодо закупівлі випробувального обладнання для забезпечення випробувань за напрямом механічних, електричних і кліматичних випробувань Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки.
- 28 May 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 3,p. 67-76
PERSPECTIVE WAYS OF DEVELOPMENT OF THE LABORATORY TESTING FACILITIES OF THE ARMED FORCES OF UKRAINE
Світова практика створення, модернізації зразків озброєння та військової техніки передбачає проведення у процесі їх життєвого циклу, багаточисельних випробувань, перевірок та оцінок поточного технічного стану. Завдання організації та проведення випробувань, зокрема механічних, електричних та кліматичних, у Державному науково-дослідному інституті випробувань і сертифікації озброєння та військової техніки покладене на науково-дослідну лабораторію, що входить до складу науково-технічного комплексу вимірювань. На сьогоднішній день лабораторія обладнана не в повному обсязі сучасним випробувальним обладнанням. Тому гостро постає завдання щодо обґрунтування шляхів розвитку та забезпечення науково-дослідної лабораторії випробувальним обладнанням для проведення механічних, електричних та кліматичних випробувань зразків озброєння та військової техніки. Метою статті є визначення перспективних шляхів розвитку лабораторно-випробувальної бази Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки з врахуванням сучасного розвитку зразків озброєння та військової техніки. Під час проведення дослідження були застосовані загальнонаукові методи обробки та систематизації інформації, зокрема системний аналіз та синтез організаційно-технічних систем. Проведено аналіз особливостей організації та проведення механічних, електричних та кліматичних випробувань на підприємствах оборонно-промислового комплексу України. Встановлено, що основою випробувань, окрім законодавчих актів та нормативно-технічних документів, є наявність сучасної лабораторно-випробувальної бази, оскільки без засобів вимірювань та випробувань неможливо переконатися в стійкості, міцності та тривкості зразків озброєння та військової техніки до впливу зовнішніх чинників. Наведено пропозиції щодо закупівлі випробувального обладнання для забезпечення випробувань за напрямом механічних, електричних і кліматичних випробувань Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки.