S. Prykhodko
S. Prykhodko has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- I. Lappo
Державний науково-дослідний інститут випробувань і сертифікації озброєння та військової техніки, м. Чернігів
4 shared publications - Yurii Dobryshkin
State Scientific Research Institute of Armament and Military Equipment Testing and Certification, Ukraine
2 shared publications - Alla Ilchenko
Poltava State Agrarian University, Ukraine
1 shared publication - M. Herashchenko1 shared publication
- S. Martyniuk1 shared publication
- S. Shulha1 shared publication
Latest Publications
- 1 January 2023
- Published by South Ukrainian National Pedagogical University named after K. D. Ushynsky in Politicus
- No. 2,p. 50-54
Network parties as new political actors
- 1 January 2023
- Published by South Ukrainian National Pedagogical University named after K. D. Ushynsky in Politicus
- No. 2,p. 50-54
Network parties as new political actors
- Open Access
- 30 December 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 14 (4) , 110-117
BASIC PRINCIPLES OF IMPROVING THE ACCURACY OF TEMPERATURE MEASUREMENT BY NON-CONTACT METHODS
Statement of the Problem. The development of methods and means for measuring temperature and improving the accuracy of measurement, as well as the study of thermal processes of temperature distribution is a promising and urgent scientific task. Analysis of recent research and publications. The analysis of professional literature has shown that at present the problem of studying the temperature distribution in a particular field of activity has already been studied to some extent. However, the practical implementation of methods and means to improve the accuracy of temperature measurement is not sufficiently developed. The purpose of the article is to determine the fundamental factors by analyzing the theoretical and experimental material related to improving the accuracy of temperature measurement and the study of thermal processes during temperature measurements by non-contact method. Non-contact methods allow temperature measurement at a distance without direct contact with the object of measurement and are based on measuring the surface temperature of the object using infrared devices: pyrometers and thermal imagers. A pyrometer allows to measure the temperature of a local point of the measurement object, a thermal imager is used to visualize temperature fields. It is established that pyrometric measurement methods are based on determining the parameters of thermal radiation of the object without disturbing its temperature field. High accuracy of measurement results is achieved due to individual selection of filters and narrow spectral range. Conclusions. The analysis made it possible to note that the main factors that affect the accuracy of the measurement results by the pyrometer include the following: the change in the emissivity of the measurement object depending on the wavelength in the spectral range and on the temperature in the measurement range; the presence of radiation absorption in the medium between the pyrometer and the measurement object (the presence of a significant amount of dust, smoke or steam in the air in front of the sample reduces the accuracy of the measurement); geometric parameters of the field of view (visibility index) of the pyrometer Taking into account these factors in practice will increase the accuracy of the temperature measurement results by the pyrometer.
- 30 December 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- Vol. 14 (4) , 110-117
Open AccessBASIC PRINCIPLES OF IMPROVING THE ACCURACY OF TEMPERATURE MEASUREMENT BY NON-CONTACT METHODS
Statement of the Problem. The development of methods and means for measuring temperature and improving the accuracy of measurement, as well as the study of thermal processes of temperature distribution is a promising and urgent scientific task. Analysis of recent research and publications. The analysis of professional literature has shown that at present the problem of studying the temperature distribution in a particular field of activity has already been studied to some extent. However, the practical implementation of methods and means to improve the accuracy of temperature measurement is not sufficiently developed. The purpose of the article is to determine the fundamental factors by analyzing the theoretical and experimental material related to improving the accuracy of temperature measurement and the study of thermal processes during temperature measurements by non-contact method. Non-contact methods allow temperature measurement at a distance without direct contact with the object of measurement and are based on measuring the surface temperature of the object using infrared devices: pyrometers and thermal imagers. A pyrometer allows to measure the temperature of a local point of the measurement object, a thermal imager is used to visualize temperature fields. It is established that pyrometric measurement methods are based on determining the parameters of thermal radiation of the object without disturbing its temperature field. High accuracy of measurement results is achieved due to individual selection of filters and narrow spectral range. Conclusions. The analysis made it possible to note that the main factors that affect the accuracy of the measurement results by the pyrometer include the following: the change in the emissivity of the measurement object depending on the wavelength in the spectral range and on the temperature in the measurement range; the presence of radiation absorption in the medium between the pyrometer and the measurement object (the presence of a significant amount of dust, smoke or steam in the air in front of the sample reduces the accuracy of the measurement); geometric parameters of the field of view (visibility index) of the pyrometer Taking into account these factors in practice will increase the accuracy of the temperature measurement results by the pyrometer.
- 5 July 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 12,p. 77-83
FEATURES OF LABORATORY TESTING OF ARMORED VEHICLES AND AUTOMOTIVE EQUIPMENT AGAINST EXTERNAL MECHANICAL AND CLIMATIC FACTORS
У статті проведено порівняння існуючих в Україні та в провідних країнах світу нормативних документів та методичний апарату проведення випробувань зразків бронетанкової та автомобільної техніки щодо впливу зовнішніх механічних і кліматичних факторів. Здійснено порівняння методів випробувань зразків бронетанкової та автомобільної техніки на вплив зовнішніх механічних і кліматичних факторів, а також визначено основні види випробувань. Практична реалізація отриманих в статті результатів полягає в можливості їх застосуванні під час розробки програм і методик лабораторних випробувань зразків бронетанкової та автомобільної техніки.
- 5 July 2022
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 12,p. 77-83
FEATURES OF LABORATORY TESTING OF ARMORED VEHICLES AND AUTOMOTIVE EQUIPMENT AGAINST EXTERNAL MECHANICAL AND CLIMATIC FACTORS
У статті проведено порівняння існуючих в Україні та в провідних країнах світу нормативних документів та методичний апарату проведення випробувань зразків бронетанкової та автомобільної техніки щодо впливу зовнішніх механічних і кліматичних факторів. Здійснено порівняння методів випробувань зразків бронетанкової та автомобільної техніки на вплив зовнішніх механічних і кліматичних факторів, а також визначено основні види випробувань. Практична реалізація отриманих в статті результатів полягає в можливості їх застосуванні під час розробки програм і методик лабораторних випробувань зразків бронетанкової та автомобільної техніки.
- Open Access
- 3 December 2021
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 9,p. 79-87
ANALYSIS OF THE PROVISIONS OF NATIONAL STANDARDS FOR TESTING ARMAMENT AND MILITARY EQUIPMENT ON THE IPMACT OF MECHANICAL FACTORS
З метою забезпечення сумісності Збройних Сил України та армій країн-членів НАТО вносяться зміни до національного законодавства України стосовно створення механізму впровадження стандартів НАТО або їх положень у Збройних Силах України. Для забезпечення нормативного супроводження життєвого циклу озброєння та військової техніки здійснюються заходи щодо повного переходу оборонно-промислового комплексу України на застосування у виробництві міжнародних, європейських стандартів та стандартів НАТО. У 2021 році прийняті національні стандарти ДСТУ STANAG 4370:2021, гармонізовані зі стандартами НАТО STANAG 4370, які регламентують організацію та проведення випробувань зразків озброєння та військової техніки на вплив зовнішніх факторів. Оскільки дані стандарти прийняті мовою оригіналу, а в Україні відсутня практика розповсюдження та використання англомовних нормативних документів, постає проблема однозначного тлумачення змісту даних стандартів всіма заінтересованими сторонами: виробниками продукції, випробувальними лабораторіями, науковими установами тощо. Метою статті є проведення аналізу основних положень національних стандартів стосовно умов та методів випробувань на вплив механічних факторів з метою імплементації їх у систему випробувань зразків озброєння та військової техніки. Під час проведення дослідження були застосовані загальнонаукові методи обробки та систематизації інформації, зокрема, системний аналіз та синтез організаційно-технічних систем. У зв‟язку із скасуванням комплексу державних військових стандартів “Апаратура, прилади, пристрої та обладнання військового призначення. Загальні технічні вимоги, методи контролю та випробувань” виникла нагальна проблема нормативного забезпечення організації та проведення випробувань озброєння та військової техніки. Визначено, що одним з основних напрямів вирішення проблеми нормативного забезпечення організації та проведення випробувань зразків озброєння та військової техніки є прийняття міжнародних військових стандартів в якості державних. Проведено аналіз основних положень стандартів, які забезпечують організацію та проведення випробувань військової техніки на вплив механічних факторів, розглянута структура та зміст даних стандартів.
- 3 December 2021
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 9,p. 79-87
Open AccessANALYSIS OF THE PROVISIONS OF NATIONAL STANDARDS FOR TESTING ARMAMENT AND MILITARY EQUIPMENT ON THE IPMACT OF MECHANICAL FACTORS
З метою забезпечення сумісності Збройних Сил України та армій країн-членів НАТО вносяться зміни до національного законодавства України стосовно створення механізму впровадження стандартів НАТО або їх положень у Збройних Силах України. Для забезпечення нормативного супроводження життєвого циклу озброєння та військової техніки здійснюються заходи щодо повного переходу оборонно-промислового комплексу України на застосування у виробництві міжнародних, європейських стандартів та стандартів НАТО. У 2021 році прийняті національні стандарти ДСТУ STANAG 4370:2021, гармонізовані зі стандартами НАТО STANAG 4370, які регламентують організацію та проведення випробувань зразків озброєння та військової техніки на вплив зовнішніх факторів. Оскільки дані стандарти прийняті мовою оригіналу, а в Україні відсутня практика розповсюдження та використання англомовних нормативних документів, постає проблема однозначного тлумачення змісту даних стандартів всіма заінтересованими сторонами: виробниками продукції, випробувальними лабораторіями, науковими установами тощо. Метою статті є проведення аналізу основних положень національних стандартів стосовно умов та методів випробувань на вплив механічних факторів з метою імплементації їх у систему випробувань зразків озброєння та військової техніки. Під час проведення дослідження були застосовані загальнонаукові методи обробки та систематизації інформації, зокрема, системний аналіз та синтез організаційно-технічних систем. У зв‟язку із скасуванням комплексу державних військових стандартів “Апаратура, прилади, пристрої та обладнання військового призначення. Загальні технічні вимоги, методи контролю та випробувань” виникла нагальна проблема нормативного забезпечення організації та проведення випробувань озброєння та військової техніки. Визначено, що одним з основних напрямів вирішення проблеми нормативного забезпечення організації та проведення випробувань зразків озброєння та військової техніки є прийняття міжнародних військових стандартів в якості державних. Проведено аналіз основних положень стандартів, які забезпечують організацію та проведення випробувань військової техніки на вплив механічних факторів, розглянута структура та зміст даних стандартів.
- 30 December 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 6,p. 81-86
DEVELOPMENT OF THE GENERAL REQUIREMENTS FOR THERMAL PRESSURE CHAMBER
Inspection of armament and military equipment (AME) for the quality of manufacture and purpose tasks performance is carried out exclusively through testing. Tasks of conducting tests within the framework of ensuring the implementation of State programs for equipping the Armed Forces of Ukraine with modern armament and military equipment require proper instrumentation of the laboratory and test base of the Armed Forces of Ukraine, which is necessary to determine during tests numerical indicators of technical and operational characteristics in accordance with requirements of state standards parallel to standards of world’s major economies to evaluate new, upgraded armament, armament with service life extension and procured armament. During the study, general scientific methods of information processing and systematization were used, in particular system analysis and synthesis of organizational and technical systems. The purpose of the article is to improve the quality of testing of new and modernized pieces of AME by developing general requirements for a thermal pressure chamber. A study was conducted to substantiate the composition of the thermal pressure chamber, its main tasks, objects of action, capabilities, conditions of application, requirements for interaction with control systems or other objects with which the system is combined. Based on the analysis, the article proposes general requirements for a thermal pressure chamber, which will improve the quality of testing of new and upgraded pieces of AME; reduce material and technical expenditures and reduce the time of AME testing.
- 30 December 2020
- Published by State Scientific Research Institute of Armament and Military Equipment Testing and Certification in Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки
- No. 6,p. 81-86
DEVELOPMENT OF THE GENERAL REQUIREMENTS FOR THERMAL PRESSURE CHAMBER
Inspection of armament and military equipment (AME) for the quality of manufacture and purpose tasks performance is carried out exclusively through testing. Tasks of conducting tests within the framework of ensuring the implementation of State programs for equipping the Armed Forces of Ukraine with modern armament and military equipment require proper instrumentation of the laboratory and test base of the Armed Forces of Ukraine, which is necessary to determine during tests numerical indicators of technical and operational characteristics in accordance with requirements of state standards parallel to standards of world’s major economies to evaluate new, upgraded armament, armament with service life extension and procured armament. During the study, general scientific methods of information processing and systematization were used, in particular system analysis and synthesis of organizational and technical systems. The purpose of the article is to improve the quality of testing of new and modernized pieces of AME by developing general requirements for a thermal pressure chamber. A study was conducted to substantiate the composition of the thermal pressure chamber, its main tasks, objects of action, capabilities, conditions of application, requirements for interaction with control systems or other objects with which the system is combined. Based on the analysis, the article proposes general requirements for a thermal pressure chamber, which will improve the quality of testing of new and upgraded pieces of AME; reduce material and technical expenditures and reduce the time of AME testing.