MMMitsumasa Midorikawa

Mitsumasa Midorikawa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mitsumasa Midorikawa has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Bending Deformation of the Steel Core of Buckling-Restrained Braces

    by Mitsumasa Midorikawa, Shunsuke Hishida, Mamoru Iwata, Taichiro Okazaki, Tetsuhiro Asari

    Installation of buckling-restrained braces (BRBs) is an effective means to improve the seismic performance of building structures. The authors have developed a new variation of BRBs that use steel-and-mortar planks for the buckling-restraining system. A large number of laboratory test results, suggest that these BRBs exhibit excellent performance on par with widely used commercialized BRB products. Using the new BRBs, an experimental study was conducted to examine how bending deformation of the steel core affects the cyclic loading performance of the BRB. Four BRB specimens were fabricated in the laboratory. The specimens combined a flat-plate steel core with a relatively small width-to-thickness ratio of six, and a very stiff buckling-restraining system whose Euler buckling load was six times the yield strength of the steel core. Two specimens placed longitudinal round bars in the mortar-free gaps adjacent to the side of steel core. Two specimens kept the gaps empty by intension. The test results suggest that placement of round bars in the mortar-free gaps is an effective method to control major-axis bending deformation of the steel core.


  • Damage to Steel Buildings

    by Mitsumasa Midorikawa, Isao Nishiyama, Motohide Tada, Takehiko Terada


  • Earthquake and Tsunami Damage to Steel Structures

    by Mitsumasa Midorikawa, Taichiro Okazaki

    The 2011 Tohoku-Chiho Taiheiyo-Oki Earthquake (2011 Tohoku earthquake for short) caused widespread damage to steel building structures. The Steel Committee of the Architectural Institute of Japan (AIJ) conducted earthquake damage reconnaissance over cities where severe ground shaking was recorded. In general, steel office and industrial buildings exhibited excellent seismic performance. Buildings that used older cladding installation methods sustained damage to their claddings even if their structural performance was excellent. Damage to a few braced frames offer valuable insight into gusset plate connection design. It is widely recognized that a devastating feature of the Tohoku earthquake is the vast damage over the north-east coast of Japan caused by tsunami. This tsunami claimed nearly 20,000 lives. This coast is a rich fishing area and hence housed many fishing ports and facilities among other major buildings. At the port town of Onagawa, where the tsunami reached an extreme severity and height of 15 meters, a three-story steel building fell sideways after its piles failed. While the majority of steel buildings stood upright after the tsunami subsided, these buildings sustained heavy damage to its external and internal finishes. This paper summarizes findings made by the authors and their AIJ colleagues.


  • Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 4 — Experiments Utilizing of Multipurpose Test Bed

    by Toru Takeuchi, Kazuhiko Kasai, Mitsumasa Midorikawa, Yuichi Matsuoka, Takeshi Asakawa, Iaso Kubodera, Yuji Kurokawa, Hirotaka Ando, Shoichi Kishiki

    The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the authors are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the study on innovative steel structures, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program.


  • E-Defense Tests on Full-Scale Steel Buildings: Part 4 - Multipurpose Test Bed for Efficient Experiments

    by Toru Takeuchi, Kazuhiko Kasai, Mitsumasa Midorikawa, Yuichi Matsuoka

    The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. The project involves several studies on moment frames, innovative methods for new or existing buildings, protective systems, and nonstructural elements. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the writers are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the aforementioned study on innovative methods, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program. The test bed needs to accommodate various specimens, and have the following components: 1) Inertial mass connected to the specimen at each story level, with its self-weight supported, thereby inducing a horizontal inertial force into the specimens. 2) Inter-story stiffness element at each story level, having the capability of setting the stiffness to zero or other values, thereby adding desired horizontal stiffness to the specimen.

  • Shaking table tests on seismic response of steel braced frames with column uplift

    by Mitsumasa Midorikawa, Tatsuya Azuhata, Tadashi Ishihara, Akira Wada