Toru Takeuchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Toru Takeuchi has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Kazuhiko Kasai
Tokyo Institute of Technology, Japan
4 shared publications Ryota Matsui
Department of Architecture and Building Engineering Tokyo Institute of Technology Tokyo Japan
4 shared publications- Eiji Sato
Civil and Environmental Engineering, University of Nevada, Reno/MS 0258, Reno, NV 89519
2 shared publications - Mitsumasa Midorikawa
Hokkaido University
2 shared publications - Shojiro Motoyui
Tokyo Institute of Technology, Japan
2 shared publications - Yoji Ooki
Tokyo Institute of Technology, Japan
2 shared publications
Latest Publications
- Open Access
- 13 April 2016
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 45 (12) , 1895-1917
Out‐of‐plane stability assessment of buckling‐restrained braces including connections with chevron configuration
Summary: One of the key limit states of buckling‐restrained braces (BRBs) is global flexural buckling including the effects of the connections. The authors have previously proposed a unified explicit equation set for controlling the out‐of‐plane stability of BRBs based on bending‐moment transfer capacity at the restrainer ends. The proposed equation set is capable of estimating BRB stability for various connection stiffnesses, including initial out‐of‐plane drift effects. However, it is only valid for symmetrical end conditions, limiting application to the single diagonal configuration. In the chevron configuration, the out‐of‐plane stiffness in the two ends differs because of the rotation of the attached beam. In this study, the equation set is extended to BRBs with asymmetric end conditions, such as the chevron configuration. Cyclic loading tests of the chevron configuration with initial out‐of‐plane drifts are conducted, and the results are compared with the proposed equation set, which is formulated as a function of the normalized stiffness of the attached beam. © 2016 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd. © 2016 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd.
- 13 April 2016
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 45 (12) , 1895-1917
Open AccessOut‐of‐plane stability assessment of buckling‐restrained braces including connections with chevron configuration
Summary: One of the key limit states of buckling‐restrained braces (BRBs) is global flexural buckling including the effects of the connections. The authors have previously proposed a unified explicit equation set for controlling the out‐of‐plane stability of BRBs based on bending‐moment transfer capacity at the restrainer ends. The proposed equation set is capable of estimating BRB stability for various connection stiffnesses, including initial out‐of‐plane drift effects. However, it is only valid for symmetrical end conditions, limiting application to the single diagonal configuration. In the chevron configuration, the out‐of‐plane stiffness in the two ends differs because of the rotation of the attached beam. In this study, the equation set is extended to BRBs with asymmetric end conditions, such as the chevron configuration. Cyclic loading tests of the chevron configuration with initial out‐of‐plane drifts are conducted, and the results are compared with the proposed equation set, which is formulated as a function of the normalized stiffness of the attached beam. © 2016 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd. © 2016 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd.
- Open Access
- 1 April 2015
- Published by Science Publications in American Journal of Engineering and Applied Sciences
- Vol. 8 (4) , 455-464
Optimal Arrangement of Energy-Dissipating Members for Seismic Retrofitting of Truss Structures
Optimal Arrangement of Energy-Dissipating Members for Seismic Retrofitting of Truss Structures
- 1 April 2015
- Published by Science Publications in American Journal of Engineering and Applied Sciences
- Vol. 8 (4) , 455-464
Open AccessOptimal Arrangement of Energy-Dissipating Members for Seismic Retrofitting of Truss Structures
Optimal Arrangement of Energy-Dissipating Members for Seismic Retrofitting of Truss Structures
- Open Access
- 8 October 2013
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 43 (6) , 851-869
Out‐of‐plane stability of buckling‐restrained braces including moment transfer capacity
SUMMARY: Buckling‐restrained braces (BRBs) are widely used as ductile seismic‐resistant and energy‐dissipating structural members in seismic regions. Although BRBs are expected to exhibit stable hysteresis under cyclic axial loading, one of the key limit states is global flexural buckling, which can produce an undesirable response. Many prior studies have indicated the possibility of global buckling of a BRB before its core yields owing to connection failure. In this paper, BRB stability concepts are presented, including their bending‐moment transfer capacity at restrainer ends for various connection stiffness values with initial out‐of‐plane drifts, and a unified simple equation set for ensuring BRB stability is proposed. Moreover, a series of cyclic loading tests with initial out‐of‐plane drifts are conducted, and the results are compared with those of the proposed equations. © 2013 The Authors.Earthquake Engineering & Structural Dynamicspublished by John Wiley & Sons Ltd.
- 8 October 2013
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 43 (6) , 851-869
Open AccessOut‐of‐plane stability of buckling‐restrained braces including moment transfer capacity
SUMMARY: Buckling‐restrained braces (BRBs) are widely used as ductile seismic‐resistant and energy‐dissipating structural members in seismic regions. Although BRBs are expected to exhibit stable hysteresis under cyclic axial loading, one of the key limit states is global flexural buckling, which can produce an undesirable response. Many prior studies have indicated the possibility of global buckling of a BRB before its core yields owing to connection failure. In this paper, BRB stability concepts are presented, including their bending‐moment transfer capacity at restrainer ends for various connection stiffness values with initial out‐of‐plane drifts, and a unified simple equation set for ensuring BRB stability is proposed. Moreover, a series of cyclic loading tests with initial out‐of‐plane drifts are conducted, and the results are compared with those of the proposed equations. © 2013 The Authors.Earthquake Engineering & Structural Dynamicspublished by John Wiley & Sons Ltd.
- 1 November 2011
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 137 (11) , 1311-1318
Cumulative Cyclic Deformation Capacity of Circular Tubular Braces under Local Buckling
Tubular-section members are commonly used as seismic-resistant braces because they have a higher moment of inertia than open cross sections of equivalent area. However, the cumulative cyclic deformation capacity of tubular sections after buckling is smaller than that of open sections, such as H-shaped sections, because fracture is initiated by local buckling of circular tubular sections. To evaluate the seismic performance of such diagonal braces, it is essential to predict the cumulative cyclic deformation capacity of these braces before any fracturing. In this study, the cumulative cyclic deformation capacity of circular tube braces under local buckling was assessed by performing cyclic loading tests for a range of slenderness and diameter-to-thickness ratios. The mechanism of strain concentration in the tubular braces was studied in various types of analysis, and a method is proposed for assessing the cumulative deformation capacity before fracture based on the entire axial deformation of the braces.
- 1 November 2011
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 137 (11) , 1311-1318
Cumulative Cyclic Deformation Capacity of Circular Tubular Braces under Local Buckling
Tubular-section members are commonly used as seismic-resistant braces because they have a higher moment of inertia than open cross sections of equivalent area. However, the cumulative cyclic deformation capacity of tubular sections after buckling is smaller than that of open sections, such as H-shaped sections, because fracture is initiated by local buckling of circular tubular sections. To evaluate the seismic performance of such diagonal braces, it is essential to predict the cumulative cyclic deformation capacity of these braces before any fracturing. In this study, the cumulative cyclic deformation capacity of circular tube braces under local buckling was assessed by performing cyclic loading tests for a range of slenderness and diameter-to-thickness ratios. The mechanism of strain concentration in the tubular braces was studied in various types of analysis, and a method is proposed for assessing the cumulative deformation capacity before fracture based on the entire axial deformation of the braces.
- 7 December 2009
- Published by American Society of Civil Engineers (ASCE)
- p. 1000-1009
Seismic Retrofitting Using Energy Dissipation Façades
Building Façade has various functions, not only being suitable for placing additional seismic reinforce elements, but affecting on architectural appearance and running energy efficiency. For improving all of these performances, the authors have proposed the concept of "Integrated Façade", which treats structural design, façade design and environmental design combined together, including improvements on seismic performances using seismic energy dissipation devices. The practical application of this concept to the 40-years aged building is reported, which requires improvement in seismic performance allowing continuous tenant occupancy along the retrofit works.
- 7 December 2009
- Published by American Society of Civil Engineers (ASCE)
- p. 1000-1009
Seismic Retrofitting Using Energy Dissipation Façades
Building Façade has various functions, not only being suitable for placing additional seismic reinforce elements, but affecting on architectural appearance and running energy efficiency. For improving all of these performances, the authors have proposed the concept of "Integrated Façade", which treats structural design, façade design and environmental design combined together, including improvements on seismic performances using seismic energy dissipation devices. The practical application of this concept to the 40-years aged building is reported, which requires improvement in seismic performance allowing continuous tenant occupancy along the retrofit works.
- 14 October 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 3 — Experiments on Dampers and Frame Subassemblies
Wide-ranging participation from the US and Japan is being encouraged in the NEES/E-Defense Collaboration Research Program utilizing the E-Defense shaking table facility. The facility, whose construction was completed in early 2005, is the largest earthquake simulator capable of subjecting full-scale structures to the strongest earthquakes recorded in the worlds. Relatively short term collaboration has already taken place involving geo-structures, wooden buildings, and reinforced concrete buildings. Currently, more emphasis is made on longer term collaboration out to 2010, involving steel buildings and bridges. The steel building project focuses on moment-resisting frames, innovative methods for new or existing buildings, nonstructural elements, and protective systems. Accordingly, the Japan team has four working groups (WG's). This paper discusses the work of Damper and Isolation Systems WG focusing on protective systems, such as passive control systems and base isolation systems for the steel buildings. Three companion papers by Suita et al. Ohsaki et al., and Takeuchi et al. discuss the studies by the other WG's.
- 14 October 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 3 — Experiments on Dampers and Frame Subassemblies
Wide-ranging participation from the US and Japan is being encouraged in the NEES/E-Defense Collaboration Research Program utilizing the E-Defense shaking table facility. The facility, whose construction was completed in early 2005, is the largest earthquake simulator capable of subjecting full-scale structures to the strongest earthquakes recorded in the worlds. Relatively short term collaboration has already taken place involving geo-structures, wooden buildings, and reinforced concrete buildings. Currently, more emphasis is made on longer term collaboration out to 2010, involving steel buildings and bridges. The steel building project focuses on moment-resisting frames, innovative methods for new or existing buildings, nonstructural elements, and protective systems. Accordingly, the Japan team has four working groups (WG's). This paper discusses the work of Damper and Isolation Systems WG focusing on protective systems, such as passive control systems and base isolation systems for the steel buildings. Three companion papers by Suita et al. Ohsaki et al., and Takeuchi et al. discuss the studies by the other WG's.
- 14 October 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 4 — Experiments Utilizing of Multipurpose Test Bed
The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the authors are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the study on innovative steel structures, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program.
- 14 October 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
Results of Recent E-Defense Tests on Full-Scale Steel Buildings: Part 4 — Experiments Utilizing of Multipurpose Test Bed
The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the authors are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the study on innovative steel structures, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program.
- 1 May 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 134 (5) , 822-831
Estimation of Cumulative Deformation Capacity of Buckling Restrained Braces
Recently, passive vibration control design has gained popularity. The aim of this design is to absorb most of the seismic energy by using additional dampers while maintaining the elasticity of the main structure. Buckling restrained braces (BRBs) are used as one of the elastoplastic dampers in this design and, therefore, the cumulative deformation capacity of BRBs to the point of fatigue fracture is an important benchmark for their performance. The estimation of this value under a random amplitude is complicated however, as this value is affected by the loading history. In this study, past experiments on BRBs are revisited in order to investigate the relation between the cumulative deformation capacity and the applied loading history. Based on these analyses, a simple method is proposed for predicting the cumulative deformation and energy absorption capacities of BRBs under random amplitudes. In contrast to Miner’s method, the proposed method does not require analyses of the individual amplitudes, and the...
- 1 May 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 134 (5) , 822-831
Estimation of Cumulative Deformation Capacity of Buckling Restrained Braces
Recently, passive vibration control design has gained popularity. The aim of this design is to absorb most of the seismic energy by using additional dampers while maintaining the elasticity of the main structure. Buckling restrained braces (BRBs) are used as one of the elastoplastic dampers in this design and, therefore, the cumulative deformation capacity of BRBs to the point of fatigue fracture is an important benchmark for their performance. The estimation of this value under a random amplitude is complicated however, as this value is affected by the loading history. In this study, past experiments on BRBs are revisited in order to investigate the relation between the cumulative deformation capacity and the applied loading history. Based on these analyses, a simple method is proposed for predicting the cumulative deformation and energy absorption capacities of BRBs under random amplitudes. In contrast to Miner’s method, the proposed method does not require analyses of the individual amplitudes, and the...
- 10 October 2007
- Published by American Society of Civil Engineers (ASCE)
E-Defense Tests on Full-Scale Steel Buildings: Part 4 - Multipurpose Test Bed for Efficient Experiments
The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. The project involves several studies on moment frames, innovative methods for new or existing buildings, protective systems, and nonstructural elements. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the writers are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the aforementioned study on innovative methods, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program. The test bed needs to accommodate various specimens, and have the following components: 1) Inertial mass connected to the specimen at each story level, with its self-weight supported, thereby inducing a horizontal inertial force into the specimens. 2) Inter-story stiffness element at each story level, having the capability of setting the stiffness to zero or other values, thereby adding desired horizontal stiffness to the specimen.
- 10 October 2007
- Published by American Society of Civil Engineers (ASCE)
E-Defense Tests on Full-Scale Steel Buildings: Part 4 - Multipurpose Test Bed for Efficient Experiments
The E-Defense shake table facility, the world's largest earthquake simulator, is being utilized for a major research project on steel buildings in Japan. The project involves several studies on moment frames, innovative methods for new or existing buildings, protective systems, and nonstructural elements. E-Defense can shake a large specimen with a complete three-dimensional configuration. However, since the cost of such a specimen can be very high, testing a part of the specimen such as the plane frame of a building would be much more economical and can still produce meaningful data. Such test methods would also enable parametric studies requiring multiple specimens. Accordingly, the writers are currently constructing a so-called "test bed" having a multipurpose inertial mass system. The test bed will be utilized for the aforementioned study on innovative methods, involving researchers from both US and Japan, as a part of the NEES/E-Defense Collaboration Research Program. The test bed needs to accommodate various specimens, and have the following components: 1) Inertial mass connected to the specimen at each story level, with its self-weight supported, thereby inducing a horizontal inertial force into the specimens. 2) Inter-story stiffness element at each story level, having the capability of setting the stiffness to zero or other values, thereby adding desired horizontal stiffness to the specimen.
- 10 October 2007
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
E-Defense Tests on Full-Scale Steel Buildings: Part 1 - Experiments Using Dampers and Isolators
Wide-ranging participation from the US and Japan is being encouraged in the NEES/E-Defense Collaboration Research Program utilizing the E-Defense shaking table facility. The facility, whose construction was completed in early 2005, is the largest earthquake simulator capable of subjecting full-scale structures to the strongest earthquakes recorded in the world. Relatively short term collaboration has already taken place involving geo-structures, wooden buildings, and reinforced concrete buildings. Currently, more emphasis is made on longer term collaboration out to 2010, involving steel buildings and bridges. Figure 1 shows overall organizations for the steel building project led by the Japan team. The steel building project focuses on moment-resisting frames, innovative methods for new or existing buildings, nonstructural elements, and protective systems. Accordingly, the Japan team has four working groups (WG's) shown in Figure 1. This paper discusses the work of Damper and Isolation Systems WG focusing on protective systems, such as passive control systems and base isolation systems for the steel buildings. Three companion papers by Suita et al., Tada et al., and Takeuchi et al. discuss the studies by the other WG's.
- 10 October 2007
- Published by American Society of Civil Engineers (ASCE)
- p. 1-12
E-Defense Tests on Full-Scale Steel Buildings: Part 1 - Experiments Using Dampers and Isolators
Wide-ranging participation from the US and Japan is being encouraged in the NEES/E-Defense Collaboration Research Program utilizing the E-Defense shaking table facility. The facility, whose construction was completed in early 2005, is the largest earthquake simulator capable of subjecting full-scale structures to the strongest earthquakes recorded in the world. Relatively short term collaboration has already taken place involving geo-structures, wooden buildings, and reinforced concrete buildings. Currently, more emphasis is made on longer term collaboration out to 2010, involving steel buildings and bridges. Figure 1 shows overall organizations for the steel building project led by the Japan team. The steel building project focuses on moment-resisting frames, innovative methods for new or existing buildings, nonstructural elements, and protective systems. Accordingly, the Japan team has four working groups (WG's) shown in Figure 1. This paper discusses the work of Damper and Isolation Systems WG focusing on protective systems, such as passive control systems and base isolation systems for the steel buildings. Three companion papers by Suita et al., Tada et al., and Takeuchi et al. discuss the studies by the other WG's.