MNMassimiliano Nardini

Massimiliano Nardini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Massimiliano Nardini has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimal Riblets Applied to Gas Turbine Compressor Blades Studied via Direct Numerical Simulation (GT2024–122305)

    by Melissa Kozul, Massimiliano Nardini, Pawel J. Przytarski, William Solomon, Aamir Shabbir, Richard D. Sandberg

    Streamwise micro-groove surfaces (“riblets”) are well known as a passive surface treatment to reduce drag, which may assist in increasing overall gas turbine efficiency. The first direct numerical simulation of micro-scaled riblets on an axial high-pressure compressor blade at engine-relevant conditions (Kozul et al., 2023, “Direct Numerical Simulation of Riblets Applied to Gas Turbine Compressor Blades at On- and Off-Design Incidences.” Proceedings of the ASME Turbo Expo, Boston, GT2023–10103) demonstrated the ability of riblets to reduce the skin friction along most of the chord of a high-pressure compressor blade, at both on- and off-design inflow incidences. However, this previous study only considered riblets with fixed physical dimensions. The present work considers a “locally optimal” riblet geometry applied to the high-pressure compressor blade, where the riblet geometry is smoothly adjusted along the chord to target optimal riblet dimensions in viscous units, known from fundamental fluid mechanics studies. The present locally optimal riblets do indeed reduce the skin friction on the surface of the high-pressure compressor blade at both design and off-design inflow incidences and are generally at least as effective as the previous fixed-geometry riblets. Yet, the present riblet surfaces tend to increase pressure wake losses. In particular, at positive incidence, although the locally optimal riblets generally further reduce the skin friction compared to the fixed riblets, the wake loss increases by a significant 20% with respect to the reference smooth-blade case. A complex flow interaction with the suction-side separation bubble at the leading edge may be responsible for the significantly increased loss at positive inflow incidence.


  • Open Access

    Effects of Localized Non-Gaussian Roughness on High-Pressure Turbine Aerothermal Performance: Convective Heat Transfer, Skin Friction, and the Reynolds’ Analogy

    by Thomas O. Jelly, Massimiliano Nardini, Richard D. Sandberg, Paul Vitt, Greg Sluyter

    Compressible direct numerical simulations are conducted to investigate how surface roughness affects the aerothermal performance of a high-pressure turbine vane operating at an exit Reynolds number of 0.59 ×106 and exit Mach number of 0.92. The roughness under investigation here was synthesized with non-Gaussian statistical properties and an amplitude that varies over its chord length, representative of what truly occurs on an in-service vane. Particular attention is directed toward how systematically changing the axial extent of leading edge roughness affects convective heat transfer (Nusselt and Stanton numbers) and aerodynamic drag (skin friction coefficient) on the pressure and suction surfaces. The results of this investigation demonstrate that moving the larger amplitude roughness further along the suction surface can alter the blade boundary layer state. In fact, toward the trailing edge of one of the rough vanes investigated here, the local skin friction coefficient increases by a factor of 22 compared to smooth-vane levels, whereas the local Nusselt number increases by a factor 6. The disproportionate rise of drag compared to heat transfer is explored in further detail by quantifying the Reynolds’ analogy and by calculating the fractional contributions of pressure drag and viscous drag to the total drag force. The effect of varying the inlet turbulence intensity and integral length scale for a fixed roughness topography is also investigated, and the Reynolds number scaling of heat transfer and drag is examined in the context of the Chilton–Colburn analogy.


  • Open Access

    Performance of Rough-Ribbed Low-Pressure Turbine Blades Under Varying Loading and Operating Conditions

    by S. M. Ananth, Massimiliano Nardini, Melissa Kozul, Nagabhushana Rao Vadlamani, Richard D. Sandberg

    Recent research has demonstrated the effectiveness of riblets (streamwise aligned grooves) in reducing the profile loss of low-pressure turbine (LPT) blades under high-lift (HL) loading. In this research, we pursue the efficacy of riblets in reducing the blade profile loss under various design and off-design conditions. We adopt a strategy in which surface roughness is employed in the transitional regime to minimize the separation bubble-related losses and flush-mounted riblets downstream to further mitigate the skin-friction drag and boundary layer losses due to an increase in the turbulent wetted area. Several high-fidelity scale-resolving simulations are carried out to test the efficacy of this ‘rough-ribbed’ LPT blade for loadings ranging from low-lift (LL), HL, and ultra high-lift (UHL) conditions. Furthermore, two exit Reynolds numbers—83,000 and 166,000—pertaining to engine relevant design and off-design conditions, respectively, are considered. The streamwise evolution of skin-friction coefficient and boundary layer integral parameters are compared and contrasted among different test cases. The instantaneous flow features and second-order statistics such as the Reynolds stress and turbulent kinetic energy are analyzed to determine the design and off-design performance of riblets. It is found that the efficacy of scallop-shaped riblets in reducing the profile loss improves with loading. Specifically, the net skin-friction reduction increases from 3.4% under LL to 8% under UHL loading at cruise Re. There is a corresponding reduction in the trailing edge momentum thickness (θTE) from 10% to 15%. A further reduction in θTE is attained from design to off-design Re under UHL loading. Thus, the effect of riblets in reducing mixing losses improves with increasing Re. It is also found that the riblets reduce flow blockage due to boundary layers. Furthermore, the necessity to optimize riblet ramp to achieve skin-friction reduction under off-design conditions is highlighted.


  • Effects of Riblet Dimensions on the Transitional Boundary Layers Over High-Lift Turbine Blades

    by S. M. Ananth, Massimiliano Nardini, Aditya Vaid, Melissa Kozul, Nagabhushana Rao Vadlamani, Richard D. Sandberg

    Substantial research exists in the literature on reducing the profile loss of transitional boundary layers over low-pressure turbine (LPT) blades via different mechanisms such as freestream turbulence, upstream wakes, and surface roughness. These mechanisms have proven to be beneficial in mitigating the separation bubble-related losses in ultra-high-lift blade designs, despite an increase in the loss due to increased turbulent wetted area (TWA). In this work, we adopt a strategy of employing surface roughness in the transitional regime to minimize the separation bubble-related losses and flush-mounted riblets downstream to further mitigate the skin-friction drag and boundary layer losses due to an increase in the TWA. Several high-fidelity scale-resolving simulations are performed on this “rough-ribbed blade surface” to discern the effect of varying the riblet spacing (s+) and height (h+). The streamwise evolution of skin-friction coefficient, boundary layer integral parameters, and shape factor are compared and contrasted among riblets of different dimensions. The instantaneous flow features and second-order statistics such as the Reynolds stress, turbulent kinetic energy, and its production are analyzed for different test cases to determine the impact of riblets on these quantities. When compared to the roughness alone configuration, the scalloped shape riblets with s+ = 17 and h+ = 22 reduced the net skin-friction drag by 7.3% and the trailing edge momentum thickness by 14.5%, thereby demonstrating the efficacy of riblets in reducing the mixing losses under adverse pressure gradients. Through an analysis of flow blockage introduced by the application of riblets, the deleterious effects of increasing the riblet height along with the necessity of optimizing the riblet ramp are highlighted.


  • Direct Numerical Simulation of Transitional and Turbulent Flows Over Multi-Scale Surface Roughness—Part II: The Effect of Roughness on the Performance of a High-Pressure Turbine Blade

    by Massimiliano Nardini, Thomas O. Jelly, Melissa Kozul, Richard D. Sandberg, Paul Vitt, Greg Sluyter

    Turbine blades generally present surface roughness introduced in the manufacturing process or caused by in-service degradation, which can have a significant impact on aero-thermal performance. A better understanding of the fundamental physical mechanisms arising from the interaction between the roughness and the turbine flow at engine-relevant conditions can provide insights for the design of blades with improved efficiency and longer operational life. To this end, a high-fidelity numerical framework combining a well-validated solver for direct numerical simulation and a second-order accurate immersed boundary method is employed to predict roughness-induced aero-thermal effects on an LS89 high-pressure turbine (HPT) blade at engine-relevant conditions. Different amplitudes and distributions of surface roughness are investigated and a reference smooth-blade simulation under the same flow conditions is conducted for comparison. Roughness of increasing amplitude progressively shifts the blade suction side boundary layer transition upstream, producing larger values of the turbulent kinetic energy and higher total wake losses. The on-surface data-capturing capabilities of the numerical framework provide direct measurements of the heat flux and the skin friction coefficient, hence offering quantitative information between the surface topology and engineering-relevant performance parameters. This work may provide a benchmark for future numerical studies of turbomachinery flows with roughness.


  • Direct Numerical Simulation of Transitional and Turbulent Flows Over Multi-Scale Surface Roughness—Part I: Methodology and Challenges

    by Massimiliano Nardini, Melissa Kozul, Thomas O. Jelly, Richard D. Sandberg

    High-fidelity simulation of transitional and turbulent flows over multi-scale surface roughness presents several challenges. For instance, the complex and irregular geometrical nature of surface roughness makes it impractical to employ conforming structured grids, commonly adopted in large-scale numerical simulations due to their high computational efficiency. One possible solution to overcome this problem is offered by immersed boundary methods, which allow wall boundary conditions to be enforced on grids that do not conform to the geometry of the solid boundary. To this end, a three-dimensional, second-order accurate boundary data immersion method (BDIM) is adopted. A novel mapping algorithm that can be applied to general three-dimensional surfaces is presented, together with a newly developed data-capturing methodology to extract and analyze on-surface flow quantities of interest. A rigorous procedure to compute gradient quantities such as the wall shear stress and the heat flux on complex non-conforming geometries is also introduced. The new framework is validated by performing a direct numerical simulation (DNS) of fully developed turbulent channel flow over sinusoidal egg-carton roughness in a minimal-span domain. For this canonical case, the averaged streamwise velocity profiles are compared against results from the literature obtained with a body-fitted grid. General guidelines on the BDIM resolution requirements for multi-scale roughness simulation are given. Momentum and energy balance methods are used to validate the calculation of the overall skin friction and heat transfer at the wall. The BDIM is then employed to investigate the effect of irregular homogeneous surface roughness on the performance of an LS-89 high-pressure turbine blade at engine-relevant conditions using DNS. This is the first application of the BDIM to realize multi-scale roughness for transitional flow in transonic conditions in the context of high-pressure turbines. The methodology adopted to generate the desired roughness distribution and to apply it to the reference blade geometry is introduced. The results are compared to the case of an equivalent smooth blade.


  • Profile Loss Reduction of High-Lift Turbine Blades With Rough and Ribbed Surfaces

    by Ananth Sivaramakrishnan Malathi, Massimiliano Nardini, Aditya Vaid, Nagabhushana Rao Vadlamani, Richard D. Sandberg

    Transitional boundary layers on low-pressure turbines (LPTs) are prone to separation on the suction surface of the blade under strong local adverse pressure gradients. Intermittent freestream turbulence, periodic wakes shed by the upstream blades, and surface roughness due to in-service degradation of the blades are shown to suppress the separation. Although this generally leads to a profile loss reduction, some of the benefits are offset by a loss increase associated with an increased turbulent wetted area. In this work, we explore a strategy where the losses in both the transitional and turbulent boundary layers can be reduced. In particular, we employ surface roughness in the transitional regime to reduce the separation bubble-related losses and riblets in the turbulent regime to further reduce the losses due to the turbulent wetted area. The efficacy of this ‘rough-riblet blade surface’ is studied using high-fidelity eddy resolving simulations on the configuration of a flat surface subjected to streamwise varying pressure gradients. Two riblet shapes, sawtooth and scalloped, are considered. When compared to the roughness alone configuration, scalloped riblets reduced the skin friction drag by ≈10% and are much more effective than the sawtooth riblets. Through the streamwise evolution of the boundary layer parameters such as trailing edge momentum thickness, maximum turbulent kinetic energy, and Reynolds stresses, the additional losses incurred at the junction between the smooth wall and riblet leading edge are highlighted.