JHJan Hnátík

Jan Hnátík

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jan Hnátík has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Wireless Power Transmission System for Powering Rotating Parts of Automatic Machineries

    by Vladimir Kindl, Tomas Kavalir, Jiri Sika, Jan Hnatik, Michal Krizek, Michal Frivaldsky

    This paper deals with the analysis of a suitable compensation topology of a wireless power transmission system for powering the rotating parts of modern automatic machine tools. It summarizes the important properties of the serio-parallel compensation topology suitable for this application and demonstrates a detailed mathematical derivation using the first harmonic approximation. The paper details the industrial implementation of the system in a specific automatic machine tool application and demonstrates the strong technical advantages of the proposed design. Important theoretical conclusions and technical assumptions made when considering the system layout are verified by experimental laboratory measurements and the final deployment of the technology in the professional tool DMU 40 eVo linear.


  • Open Access

    Thermodynamics and Mechanics of Thermal Spraying of Steel EN 10060 Substrate with NiCrBSi Alloy after Milling

    by Jan Valíček, Marta Harničárová, Jan Řehoř, Milena Kušnerová, Ludmila Kučerová, Miroslav Gombár, Jaroslava Fulemová, Jan Filipenský, Jan Hnátík

    The objective of this paper is to present a new way of identifying and predicting the relationship between thermodynamic and physical-mechanical parameters in the formation of a layer after spraying on a substrate with NiCrBSi alloy and its subsequent processing by milling. The milling of the spherical surface of the EN 10060 material after spraying was performed on the DMU 40 eVolinear linear milling centre. The experimental part of the article is focused on investigating the influence of cutting parameters when machining a selected combination of materials (substrate-coating: EN 10060 steel-NiCrBSi alloy). The experiment is based on the results of direct measurements of three basic cutting parameters, namely: cutting speed vc (m∙min−1), feed per tooth fz (mm), and the depth of cut ap (mm). The new distribution functions of selected cutting parameters were derived. The analytical results of the thermodynamic calculations performed on nickel-based alloy can be used for accurate predictions of the technological parameters of milling a spherical substrate made of EN 10060 steel after HVOF spraying, and also for both sample preparation and the subsequent production of high-quality coatings.


  • Open Access

    Milling of Complex Surfaces of EN 10060 Steel after HVOF Sprayed NiCrBSi Coatings

    by Jan Valíček, Marta Harničárová, Jan Řehoř, Milena Kušnerová, Jaroslava Fulemová, Miroslav Gombár, Ludmila Kučerová, Jan Filipenský, Jan Hnátík

    The high-velocity oxy-fuel spraying process was used to investigate and improve the surface properties of a workpiece. The research was focused on the spherical surface of a workpiece made of high-strength steel, a ball and socket assembly. After spraying with a nickel alloy, the surface was machined by milling. The coating was carried out as a process in which a very thin layer of coating of the required thickness and the required specific properties, i.e., high Vickers hardness, adhesion to the surface, wear resistance and other important characteristics, which must be respected in other machining methods, was applied to the already finished, heat-prepared metal substrate. This article deals with the milling of complex surfaces of steel substrate EN 10060 after spraying with NiCrBSi alloy. After spraying, a total of 15 milling experiments were performed in order to determine precisely the optimal cutting parameters of milling and surface adhesion, based on newly acquired prediction relations. The main presented results are new relations for the determination of optimal technological milling conditions based on the identification of adhesive sections using derived equations. The new relations were verified and also compared with the current literature in the field.