Andrii Humennyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Andrii Humennyi has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Grebenikov
Kharkiv Aviation Institute – National Aerospace University , 17 Chkalov Str., Kharkiv, 61070 , Ukraine
8 shared publications - Dmytro Konyshev
State Company “Antonov
6 shared publications - Liliia Buival
National Aerospace University “Kharkiv Aviation Institute
5 shared publications - Vasyl Loginov
FED JSC , 132 Sumska St. , Kharkiv Ukraine
5 shared publications - Anton Chumak
National Aerospace University “Kharkiv Aviation Institute
4 shared publications - Oleksandr Dveirin
ANTONOV Company
3 shared publications
Latest Publications
- 10 September 2025
- Published by National Aerospace University - Kharkiv Aviation Institute in RADIOELECTRONIC AND COMPUTER SYSTEMS
- Vol. 2025 (3) , 3-20
Modeling of defensive actions for protecting military and civilian facilities from massive wave attacks by enemy strike drones
The conditions of modern hybrid warfare require the creation of the necessary defense potential to protect military facilities and critical infrastructure from massive attacks by enemy strike drones. A feature of repelling drone air attacks is the use of a diverse arsenal of defensive means (anti-drone means (ADM), electronic warfare (EW), anti-aircraft warfare (AAW), interceptor drones (ID), etc.). Therefore, it is relevant to conduct research on modeling defensive actions and planning the protection of military and civilian facilities from attacking missions of enemy strike drones. The subject of the study is a mathematical and simulation model used for planning the protection of military and civilian facilities against swarm attacks by enemy strike drones.The purpose of the study is to simulate the planning of defensive actions against enemy air attacks, under conditions of limited capabilities, which will ensure the rational use of military resources. Tasks to be solved: analyze the sequence of defensive actions; analyze the most threatening places for the formation and launch of enemy strike drones; justify the creation of the defense of critical military and civilian facilities; create the necessary defense potential to protect critical military and civilian facilities; model possible scenarios for the launch and movement of enemy strike drones; demonstrate the feasibility and effectiveness of the proposed approach using an illustrated example. Mathematical methods and models used: system analysis of defensive anti-drone actions; qualitative assessment of defensive action options using linguistic variables; lexicographic ordering of options to highlight relevant locations for the protection of military and civilian facilities; integer (boolean) programming method to substantiate the defensive potential of protection, in conditions of limited capabilities; multi-agent modeling to analyze and predict possible scenarios of an enemy attack mission using strike drones. The following results were obtained: a systematic presentation of planning defensive actions against massive attacks by enemy strike drones was proposed; the most threatening places for the formation and launch of swarms of enemy strike drones were substantiated; the relevant locations of anti-drone means for protecting military facilities and dual infrastructure facilities were identified; the necessary defense potential was created to protect against air attacks in conditions of limited capabilities; a multi-agent simulation model was developed to analyze and predict possible scenarios for the launch and flight of enemy strike drones to the locations of critical military and civilian facilities. Conclusions. The results of the study allow us to substantiate and plan defensive anti-drone actions to protect military facilities and dual-purpose infrastructure facilities. The scientific novelty of the proposed approach lies in the scientific substantiation of defensive actions to protect military and civilian facilities from massive attacks by enemy strike drones based on the use of the developed complex of original and new mathematical and simulation models.
- 10 September 2025
- Published by National Aerospace University - Kharkiv Aviation Institute in RADIOELECTRONIC AND COMPUTER SYSTEMS
- Vol. 2025 (3) , 3-20
Modeling of defensive actions for protecting military and civilian facilities from massive wave attacks by enemy strike drones
The conditions of modern hybrid warfare require the creation of the necessary defense potential to protect military facilities and critical infrastructure from massive attacks by enemy strike drones. A feature of repelling drone air attacks is the use of a diverse arsenal of defensive means (anti-drone means (ADM), electronic warfare (EW), anti-aircraft warfare (AAW), interceptor drones (ID), etc.). Therefore, it is relevant to conduct research on modeling defensive actions and planning the protection of military and civilian facilities from attacking missions of enemy strike drones. The subject of the study is a mathematical and simulation model used for planning the protection of military and civilian facilities against swarm attacks by enemy strike drones.The purpose of the study is to simulate the planning of defensive actions against enemy air attacks, under conditions of limited capabilities, which will ensure the rational use of military resources. Tasks to be solved: analyze the sequence of defensive actions; analyze the most threatening places for the formation and launch of enemy strike drones; justify the creation of the defense of critical military and civilian facilities; create the necessary defense potential to protect critical military and civilian facilities; model possible scenarios for the launch and movement of enemy strike drones; demonstrate the feasibility and effectiveness of the proposed approach using an illustrated example. Mathematical methods and models used: system analysis of defensive anti-drone actions; qualitative assessment of defensive action options using linguistic variables; lexicographic ordering of options to highlight relevant locations for the protection of military and civilian facilities; integer (boolean) programming method to substantiate the defensive potential of protection, in conditions of limited capabilities; multi-agent modeling to analyze and predict possible scenarios of an enemy attack mission using strike drones. The following results were obtained: a systematic presentation of planning defensive actions against massive attacks by enemy strike drones was proposed; the most threatening places for the formation and launch of swarms of enemy strike drones were substantiated; the relevant locations of anti-drone means for protecting military facilities and dual infrastructure facilities were identified; the necessary defense potential was created to protect against air attacks in conditions of limited capabilities; a multi-agent simulation model was developed to analyze and predict possible scenarios for the launch and flight of enemy strike drones to the locations of critical military and civilian facilities. Conclusions. The results of the study allow us to substantiate and plan defensive anti-drone actions to protect military facilities and dual-purpose infrastructure facilities. The scientific novelty of the proposed approach lies in the scientific substantiation of defensive actions to protect military and civilian facilities from massive attacks by enemy strike drones based on the use of the developed complex of original and new mathematical and simulation models.
- Open Access
- 21 November 2024
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 60-69
Гібридно-електрична силова установка для літаків: тенденції розвитку, виклики та можливості
Aircraft hybrid-electric propulsion: development trends, challenges and opportunities
- 21 November 2024
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 60-69
Open AccessГібридно-електрична силова установка для літаків: тенденції розвитку, виклики та можливості
Aircraft hybrid-electric propulsion: development trends, challenges and opportunities
- Open Access
- 21 November 2024
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 4-14
Розробка на Lua програмного модуля для визначення точки скидання некерованого вантажу з БПЛА літакового типу із системою керування Ardupilot
Cargo delivery is one of the most popular areas of application of aircraft-type UAVs with the Ardupilot control system. Autonomous missions performed by such UAVs are associated with the need to determine the point of discharge of unguided cargo, which significantly affects the accuracy of its delivery. However, Ardupilot is not equipped with a software module for determining the point of discharge of unguided cargo, and such additional software is recommended to be developed in Lua. Known software modules for determining the point of discharge of UAVs, as a rule, perform a cyclic solution of a complex system of differential equations of cargo motion, which requires significant hardware resources. However, for heights up to 400 m relative to the ground surface, it is possible to use simplified analytical expressions of cargo motion with a delivery accuracy of ±5 m to increase the efficiency of the specified software module. Therefore, the object of research is the process of determining the point of discharge of unguided cargo from an aircraft-type UAV using a Lua script. The subject of research is a computer model of the movement of unguided cargo in Lua, on the basis of which the point of discharge is determined. The aim of the work is to develop a software module in Lua to determine the point of dropping an unguided cargo from an aircraft-type UAV with the ArduPilot control system by using simplified equations of motion of the cargo at altitudes up to 400 m. The following results were obtained: a general algorithm for the operation of the software module for determining the point of dropping an unguided cargo was developed, a Lua script was developed to determine the point of dropping from heights up to 40 m, a Lua script was developed to determine the point of dropping from heights from 40 to 400 m relative to the ground surface, a Lua script was provided to determine the point of dropping from heights above 400 m relative to the ground surface, and the user interface of the software module was implemented. Conclusion: a software module was developed in Lua to determine the point of dropping an unguided cargo from an aircraft-type UAV with the Ardupilot control system. A feature of this software is the use of different approaches to determining the point of dropping in the intervals of heights up to 40 m, from 40 to 400 m and more than 400 m relative to the ground surface. This makes this software module more effective at low altitudes.
- 21 November 2024
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 4-14
Open AccessРозробка на Lua програмного модуля для визначення точки скидання некерованого вантажу з БПЛА літакового типу із системою керування Ardupilot
Cargo delivery is one of the most popular areas of application of aircraft-type UAVs with the Ardupilot control system. Autonomous missions performed by such UAVs are associated with the need to determine the point of discharge of unguided cargo, which significantly affects the accuracy of its delivery. However, Ardupilot is not equipped with a software module for determining the point of discharge of unguided cargo, and such additional software is recommended to be developed in Lua. Known software modules for determining the point of discharge of UAVs, as a rule, perform a cyclic solution of a complex system of differential equations of cargo motion, which requires significant hardware resources. However, for heights up to 400 m relative to the ground surface, it is possible to use simplified analytical expressions of cargo motion with a delivery accuracy of ±5 m to increase the efficiency of the specified software module. Therefore, the object of research is the process of determining the point of discharge of unguided cargo from an aircraft-type UAV using a Lua script. The subject of research is a computer model of the movement of unguided cargo in Lua, on the basis of which the point of discharge is determined. The aim of the work is to develop a software module in Lua to determine the point of dropping an unguided cargo from an aircraft-type UAV with the ArduPilot control system by using simplified equations of motion of the cargo at altitudes up to 400 m. The following results were obtained: a general algorithm for the operation of the software module for determining the point of dropping an unguided cargo was developed, a Lua script was developed to determine the point of dropping from heights up to 40 m, a Lua script was developed to determine the point of dropping from heights from 40 to 400 m relative to the ground surface, a Lua script was provided to determine the point of dropping from heights above 400 m relative to the ground surface, and the user interface of the software module was implemented. Conclusion: a software module was developed in Lua to determine the point of dropping an unguided cargo from an aircraft-type UAV with the Ardupilot control system. A feature of this software is the use of different approaches to determining the point of dropping in the intervals of heights up to 40 m, from 40 to 400 m and more than 400 m relative to the ground surface. This makes this software module more effective at low altitudes.
- Open Access
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (131)) , 25-33
Construction of a ballistic model of the motion of uncontrolled cargo during its autonomous high-precision drop from a fixed-wing unmanned aerial vehicle
The object of this study is the process related to the fall of an uncontrolled cargo from a height of 400–600 meters relative to sea level in an air environment under the influence of gravity, air drag, and wind in the presence of an initial air speed of about 20 m/s. The study solves the task to build a ballistic model of the movement of an unguided cargo during autonomous high-precision dropping from an unmanned aerial vehicle of aircraft type. A system of equations was derived that explicitly describes the dependence of the cargo's travel speed and coordinates on time and takes into account the effect of gravity, air drag, and the influence of wind. The scope of application of the equations corresponds to drop heights of up to 400 m relative to the surface of the earth and the initial horizontal speed of the cargo up to 20 m/s. The resulting equations were analyzed using an example of a spherical load weighing 10 kg and the largest cross-sectional area of 7.1·10-2 m2 when it falls from heights of 200, 300, and 400 m relative to the earth's surface. In the absence of wind, the horizontal component of the load's speed at the moment of falling is ≈(13–15) m/s, and the vertical component is ≈(50–60) m/s. At the same time, the horizontal displacement of the load under the conditions of a weak crosswind can reach ≈(150–220) m. With a vertical wind speed profile, the equivalent constant wind speed can be determined, resulting in the same effect on the load as a variable speed wind. An algorithm for determining the point of unloading the cargo has been proposed. The cargo delivery error has been evaluated. The most important parameters are the flight time of the cargo and the drop height. In order to achieve a hit accuracy of ±5 m, an error in determining the time of the fall of the load is not more than ≈0.16 s, and an error in determining the height of the drop is not more than ±8 m
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (7 (131)) , 25-33
Open AccessConstruction of a ballistic model of the motion of uncontrolled cargo during its autonomous high-precision drop from a fixed-wing unmanned aerial vehicle
The object of this study is the process related to the fall of an uncontrolled cargo from a height of 400–600 meters relative to sea level in an air environment under the influence of gravity, air drag, and wind in the presence of an initial air speed of about 20 m/s. The study solves the task to build a ballistic model of the movement of an unguided cargo during autonomous high-precision dropping from an unmanned aerial vehicle of aircraft type. A system of equations was derived that explicitly describes the dependence of the cargo's travel speed and coordinates on time and takes into account the effect of gravity, air drag, and the influence of wind. The scope of application of the equations corresponds to drop heights of up to 400 m relative to the surface of the earth and the initial horizontal speed of the cargo up to 20 m/s. The resulting equations were analyzed using an example of a spherical load weighing 10 kg and the largest cross-sectional area of 7.1·10-2 m2 when it falls from heights of 200, 300, and 400 m relative to the earth's surface. In the absence of wind, the horizontal component of the load's speed at the moment of falling is ≈(13–15) m/s, and the vertical component is ≈(50–60) m/s. At the same time, the horizontal displacement of the load under the conditions of a weak crosswind can reach ≈(150–220) m. With a vertical wind speed profile, the equivalent constant wind speed can be determined, resulting in the same effect on the load as a variable speed wind. An algorithm for determining the point of unloading the cargo has been proposed. The cargo delivery error has been evaluated. The most important parameters are the flight time of the cargo and the drop height. In order to achieve a hit accuracy of ±5 m, an error in determining the time of the fall of the load is not more than ≈0.16 s, and an error in determining the height of the drop is not more than ±8 m
- Open Access
- 25 October 2024
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 5,p. 53-63
Безплазовий метод конструкторської підготовки виробництва літаків авіації загального призначення
The article’s subject is the design preparation for producing light general aviation aircraft. This article aims to develop design solutions for a light cheap aircraft with low flight and ground costs, to substantiate the possibility and necessity of using modern CAD systems and new plazless methods to ensure the interchangeability of light aircraft components to reduce design and production costs. Objective: to analyze the global demand for light aircraft, to substantiate the possibility and feasibility of introducing independent (plazless) methods for linking technological equipment and aircraft design components, to develop a list of design work and expected results, to develop digital models (electronic drawings) of the aircraft as a whole and its components, to prove the effectiveness of such approaches. The research methods used are the analysis of scientific and technical documentation, numerical modeling of the aerodynamic flow around the aircraft, the stress-strain state of the units, and the design of the aircraft and its components considering the results of numerical modeling. The following results were obtained: a set of digital models (electronic drawings) of the whole aircraft, a fuselage, a wing, a horizontal and vertical tail, a chassis, digital models (electronic drawings) of the aircraft parts. The scientific and practical novelty of the obtained results is as follows: a set of aircraft design engineering documents developed based on statistical data analysis and numerical modeling will allow manufacturing, testing the aircraft, and obtaining a certificate of airworthiness, which, in turn, will make it possible to subsequently begin serial production of the aircraft and create full-fledged primary flight training classes designed to improve flight training activities for cadets of higher military educational institutions and create opportunities for training civilian pilots.
- 25 October 2024
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 5,p. 53-63
Open AccessБезплазовий метод конструкторської підготовки виробництва літаків авіації загального призначення
The article’s subject is the design preparation for producing light general aviation aircraft. This article aims to develop design solutions for a light cheap aircraft with low flight and ground costs, to substantiate the possibility and necessity of using modern CAD systems and new plazless methods to ensure the interchangeability of light aircraft components to reduce design and production costs. Objective: to analyze the global demand for light aircraft, to substantiate the possibility and feasibility of introducing independent (plazless) methods for linking technological equipment and aircraft design components, to develop a list of design work and expected results, to develop digital models (electronic drawings) of the aircraft as a whole and its components, to prove the effectiveness of such approaches. The research methods used are the analysis of scientific and technical documentation, numerical modeling of the aerodynamic flow around the aircraft, the stress-strain state of the units, and the design of the aircraft and its components considering the results of numerical modeling. The following results were obtained: a set of digital models (electronic drawings) of the whole aircraft, a fuselage, a wing, a horizontal and vertical tail, a chassis, digital models (electronic drawings) of the aircraft parts. The scientific and practical novelty of the obtained results is as follows: a set of aircraft design engineering documents developed based on statistical data analysis and numerical modeling will allow manufacturing, testing the aircraft, and obtaining a certificate of airworthiness, which, in turn, will make it possible to subsequently begin serial production of the aircraft and create full-fledged primary flight training classes designed to improve flight training activities for cadets of higher military educational institutions and create opportunities for training civilian pilots.
- Open Access
- 8 January 2024
- Published by MDPI AG in Computation
- Vol. 12 (1) , 8
Analysis of Effectiveness of Combined Surface Treatment Methods for Structural Parts with Holes to Enhance Their Fatigue Life
The typical and most widespread stress concentrators in the lower wing panels of aircraft are the drain holes located on the stringer vertical ribs. These are prime sources for the initiation and development of fatigue cracks, which lead to early failure of the wing structure. Therefore, improving fatigue life in these critical areas is one of the significant issues for research. Two combined methods of surface plastic treatment in the location around drain holes are discussed in this paper. Using the finite element method and ANSYS software, we created a finite element model and obtained nonlinear solution results in the case of tension in a plate with three holes. In addition, the development of residual stress due to the surface plastic treatment of the hole-adjacent areas was taken into account. In this paper, it is shown that after surface treatment of the corresponding areas of the holes, residual stress, which exceeds the yield stress for the plate material, is induced. When combined with alternative tensile stress, these reduce the amplitude of the local stresses, thus increasing the number of stress cycles before failure. The benefits of this technology were confirmed by fatigue test results, which include the fatigue failure types of the plates. Graphs showing the impact of applicable surface treatment combined methods on the number of cycles to failure were also plotted.
- 8 January 2024
- Published by MDPI AG in Computation
- Vol. 12 (1) , 8
Open AccessAnalysis of Effectiveness of Combined Surface Treatment Methods for Structural Parts with Holes to Enhance Their Fatigue Life
The typical and most widespread stress concentrators in the lower wing panels of aircraft are the drain holes located on the stringer vertical ribs. These are prime sources for the initiation and development of fatigue cracks, which lead to early failure of the wing structure. Therefore, improving fatigue life in these critical areas is one of the significant issues for research. Two combined methods of surface plastic treatment in the location around drain holes are discussed in this paper. Using the finite element method and ANSYS software, we created a finite element model and obtained nonlinear solution results in the case of tension in a plate with three holes. In addition, the development of residual stress due to the surface plastic treatment of the hole-adjacent areas was taken into account. In this paper, it is shown that after surface treatment of the corresponding areas of the holes, residual stress, which exceeds the yield stress for the plate material, is induced. When combined with alternative tensile stress, these reduce the amplitude of the local stresses, thus increasing the number of stress cycles before failure. The benefits of this technology were confirmed by fatigue test results, which include the fatigue failure types of the plates. Graphs showing the impact of applicable surface treatment combined methods on the number of cycles to failure were also plotted.
- Open Access
- 6 December 2023
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 5-13
Застосування БПЛА для медичної евакуації пацієнтів
The subject of the research in this article is advanced methods and means of emergency evacuation of the injured from the scene to a medical facility, requiring urgent assistance from professionals. In comparison with the traditional method of patient transport by helicopter, particular attention is given to unmanned aerial vehicles (UAVs), which boast an impressive list of advantages and are specially adapted for such functions. Their technical capabilities and effectiveness in transporting the injured to a medical facility are thoroughly examined, making them an attractive alternative in situations requiring urgent medical assistance. The current dynamic development of technology provides the opportunity for significant expansion of the use of drones in the field of medical aviation transportation, becoming the most relevant direction in medical monitoring. The research aims to justify the broader use of drones in the healthcare system, including monitoring diseases, rescue operations, patient transport, medical equipment, medications, and other equipment. The possibilities of providing quick and effective medical assistance in difficult-to-reach places or emergencies are discussed, where drones can ensure rapid and safe transportation. The objectives of this study include determining the role and advantages of drones in medical evacuation, the structural features of drones in terms of their application in aviation transport for medical purposes, and revealing the potential of unmanned aerial vehicles in ensuring safety and optimizing costs. The scientific and practical novelty of the obtained results lies in the comprehensive advantages of drones in the context of medical evacuation and their technical data and capabilities, with particular attention to the selection of optimal power plant options, which are crucial for providing the necessary power and flight range, especially in medical transport missions. This allows for improving the functionality of drones, enhancing safety, and cost savings in performing medical aviation transportation.
- 6 December 2023
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 5-13
Open AccessЗастосування БПЛА для медичної евакуації пацієнтів
The subject of the research in this article is advanced methods and means of emergency evacuation of the injured from the scene to a medical facility, requiring urgent assistance from professionals. In comparison with the traditional method of patient transport by helicopter, particular attention is given to unmanned aerial vehicles (UAVs), which boast an impressive list of advantages and are specially adapted for such functions. Their technical capabilities and effectiveness in transporting the injured to a medical facility are thoroughly examined, making them an attractive alternative in situations requiring urgent medical assistance. The current dynamic development of technology provides the opportunity for significant expansion of the use of drones in the field of medical aviation transportation, becoming the most relevant direction in medical monitoring. The research aims to justify the broader use of drones in the healthcare system, including monitoring diseases, rescue operations, patient transport, medical equipment, medications, and other equipment. The possibilities of providing quick and effective medical assistance in difficult-to-reach places or emergencies are discussed, where drones can ensure rapid and safe transportation. The objectives of this study include determining the role and advantages of drones in medical evacuation, the structural features of drones in terms of their application in aviation transport for medical purposes, and revealing the potential of unmanned aerial vehicles in ensuring safety and optimizing costs. The scientific and practical novelty of the obtained results lies in the comprehensive advantages of drones in the context of medical evacuation and their technical data and capabilities, with particular attention to the selection of optimal power plant options, which are crucial for providing the necessary power and flight range, especially in medical transport missions. This allows for improving the functionality of drones, enhancing safety, and cost savings in performing medical aviation transportation.
- Open Access
- 6 December 2023
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 22-27
Основні питання створення моделі процесу технічної експлуатації повітряного судна військового призначення
The subject of the research in this article is the creation of a mathematical model of the process of technical operation (PTO) of a military aircraft in the system of information support for the operation of an aircraft. The aircraft is a complex technical system that includes many systems, subsystems, and elements for reliable and error-free functioning, which require constant monitoring of its technical condition to determine the possibility of its intended use. It is proposed to promote PTO in the system of information support for the operation of aircraft operating in real time and to create a mathematical model of the process. We will construct a graph of states and transitions using the transition matrix to describe the PTO of a military aircraft. The purpose of this study is to create a mathematical model of the PTO of a military aircraft in a system of information support for the operation of the aircraft operating on a real time scale. The task: to determine the role and advantage of using the mathematical model of the PTE of a military aircraft in the information support system for the operation of a CMMS-type aircraft operating in real time for its use in forecasting and managing the effectiveness of the PTE. The scientific and practical novelty of the obtained results is as follows: the advantages of the PTE mathematical model of a military aircraft in the CMMS-type aircraft operation information support system, which works in real time before the PTO model by resource and the model when decisions are made at the moment, have been determined state changes. The conclusion of this study is that the use of the proposed PTO model will allow us to evaluate complex reliability indicators in real time, that is, continuously. The considered PTO model of a military aircraft considers all the features of military aircraft operation at the current stage. This allows us to assume the possibility of its use for the entire aircraft fleet of the Air Force Base of the Armed Forces of Ukraine.
- 6 December 2023
- Published by National Aerospace University - Kharkiv Aviation Institute in Aerospace technic and technology
- No. 6,p. 22-27
Open AccessОсновні питання створення моделі процесу технічної експлуатації повітряного судна військового призначення
The subject of the research in this article is the creation of a mathematical model of the process of technical operation (PTO) of a military aircraft in the system of information support for the operation of an aircraft. The aircraft is a complex technical system that includes many systems, subsystems, and elements for reliable and error-free functioning, which require constant monitoring of its technical condition to determine the possibility of its intended use. It is proposed to promote PTO in the system of information support for the operation of aircraft operating in real time and to create a mathematical model of the process. We will construct a graph of states and transitions using the transition matrix to describe the PTO of a military aircraft. The purpose of this study is to create a mathematical model of the PTO of a military aircraft in a system of information support for the operation of the aircraft operating on a real time scale. The task: to determine the role and advantage of using the mathematical model of the PTE of a military aircraft in the information support system for the operation of a CMMS-type aircraft operating in real time for its use in forecasting and managing the effectiveness of the PTE. The scientific and practical novelty of the obtained results is as follows: the advantages of the PTE mathematical model of a military aircraft in the CMMS-type aircraft operation information support system, which works in real time before the PTO model by resource and the model when decisions are made at the moment, have been determined state changes. The conclusion of this study is that the use of the proposed PTO model will allow us to evaluate complex reliability indicators in real time, that is, continuously. The considered PTO model of a military aircraft considers all the features of military aircraft operation at the current stage. This allows us to assume the possibility of its use for the entire aircraft fleet of the Air Force Base of the Armed Forces of Ukraine.
- 11 November 2023
- Published by Springer Nature
- p. 169-207
Transport Category Aircraft Fuselage Integrated Design
- 11 November 2023
- Published by Springer Nature
- p. 169-207
Transport Category Aircraft Fuselage Integrated Design
- Open Access
- 1 September 2023
- Published by Walter de Gruyter GmbH in Transactions on Aerospace Research
- Vol. 2023 (3) , 55-71
Design Method for Pressurised and Non-Pressurised Tail Cargo Door’s Fairings Compartment in Transport Category Aircraft
The method for determining the main parameters of the tail cargo doors of transport category aircrafts is developed. A methodology for the ascertainment of these parameters has been described. An example based on an existing transport aircraft is considered. Gathered were information pertaining to the necessary design, operational and regulatory parameters and requirements of the international regulatory organisations Federal Aviation Regulations (FAR), Certification Specification (CS) and Aviation Regulations (AR). The principle of determining the dimensions of the cargo compartment, cargo floor and the hitting platforms, in the form of a ramp with a pressure door and ladders, is presented based on the initial data. Considering the described loading and unloading, as well as landing, operations, the dependence of the ramp length on the length of the cargo floor is ascertained. A method for designing a cargo door fairings in the transport category aircraft fuselage tail part is presented. The main features of the fairings compartment have been determined, together with those of its main components and their varieties, depending on the scheme of the cargo door. Information is provided on the fairings compartment structural elements parameters selection.
- 1 September 2023
- Published by Walter de Gruyter GmbH in Transactions on Aerospace Research
- Vol. 2023 (3) , 55-71
Open AccessDesign Method for Pressurised and Non-Pressurised Tail Cargo Door’s Fairings Compartment in Transport Category Aircraft
The method for determining the main parameters of the tail cargo doors of transport category aircrafts is developed. A methodology for the ascertainment of these parameters has been described. An example based on an existing transport aircraft is considered. Gathered were information pertaining to the necessary design, operational and regulatory parameters and requirements of the international regulatory organisations Federal Aviation Regulations (FAR), Certification Specification (CS) and Aviation Regulations (AR). The principle of determining the dimensions of the cargo compartment, cargo floor and the hitting platforms, in the form of a ramp with a pressure door and ladders, is presented based on the initial data. Considering the described loading and unloading, as well as landing, operations, the dependence of the ramp length on the length of the cargo floor is ascertained. A method for designing a cargo door fairings in the transport category aircraft fuselage tail part is presented. The main features of the fairings compartment have been determined, together with those of its main components and their varieties, depending on the scheme of the cargo door. Information is provided on the fairings compartment structural elements parameters selection.