Yuliia Simonova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuliia Simonova has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
Igor Iordanov
4 shared publications- Igor Iordanov
Limited Liability Company Manufacturing Company ELTEKO
4 shared publications Public higher education institution Donetsk National Technical University
4 shared publications- Serhii Podkopaiev
Donetsk National Technical University
4 shared publications - Anton Korol
ПСП «Шахтоуправління «Добропільське» ТОВ «ДТЕК Добропільвугілля»
3 shared publications - Hennadii Boichenko
ТОВ «Шахта «Свято-Покровська №3
3 shared publications
Latest Publications
- Open Access
- 1 August 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (8) , 17-26
Increasing the Efficiency of the Solar Plant for Desalination of Water
The article is devoted to the improvement of the design of a desalination solar plant for more efficient and economical production of desalinated water due to intensive evaporation of the boiling solution, reduction of energy losses to the external environment and the absence of the need for...
- 1 August 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 25 (8) , 17-26
Open AccessIncreasing the Efficiency of the Solar Plant for Desalination of Water
The article is devoted to the improvement of the design of a desalination solar plant for more efficient and economical production of desalinated water due to intensive evaporation of the boiling solution, reduction of energy losses to the external environment and the absence of the need for...
- 1 January 2022
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 1
STRUCTURING EXPERIMENTAL DATA ON THE PERFORMANCE OF ARCH SUPPORTS FOR PROBABILISTIC ASSESSMENT OF THE STATE OF RETRACTABLE DRIFTS
Purpose. Structuring of experimental data of mine observations of the performance of arched flexible supports to establish a probabilistic assessment of the state of haulage drifts of steep coal seams in the excavation areas of a coal mine. Methods. The methodological basis of the research is an integrated approach, including the analysis and generalization of scientific achievements on the problem under study; mine observations of the state of development workings; analytical calculations using the basic provisions of probability theory, mathematical statistics using differential equations. Results. A probabilistic assessment of the state of the haulage drift under different protection methods, used to predict the stability of section development workings, was obtained from the experimental data of mine observations (observation time t = 4280 hours) of the performance of the arched pliable lining installed in the working along the length of the excavation section. After the sample was formed, the calculation of a statistical assessment of the reliability of the support operation was performed: the indicators of the failure rate λ and the recovery rate μ were established. Dependencies are obtained that allow assessing the state of development workings along the length of the excavation section and in the zone of influence of the stopping operations. It is proved that in the steady mode of operation of the haulage drift, with an increase in the failure rate of the arch support by 5 times, the availability factor, as a function of the reliability and maintainability of the support, changes from 0.9 to 0.5, which leads to a deterioration in time, approximately by 60 %, operational characteristics of the support in the supported development. Novelty. The probabilistic assessment of the loss of stability of the haulage drift along the length of the excavation section is based on the structuring of the data on the performance of arched supports and depends on the method of protection of the working, the intensity of failures of the arched supple support and the frequency of its damage, when in the desired interval of observations when forming the sample, the position of the stopping front is taken into account. Practical relevance. For the reuse of development workings with a store method of preparing steep seams and a descending order of mining floors, a conceptual model is proposed that allows predicting the state of haulage drifts along the length of the excavation area, taking into account the method of protection.
- 1 January 2022
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 1
STRUCTURING EXPERIMENTAL DATA ON THE PERFORMANCE OF ARCH SUPPORTS FOR PROBABILISTIC ASSESSMENT OF THE STATE OF RETRACTABLE DRIFTS
Purpose. Structuring of experimental data of mine observations of the performance of arched flexible supports to establish a probabilistic assessment of the state of haulage drifts of steep coal seams in the excavation areas of a coal mine. Methods. The methodological basis of the research is an integrated approach, including the analysis and generalization of scientific achievements on the problem under study; mine observations of the state of development workings; analytical calculations using the basic provisions of probability theory, mathematical statistics using differential equations. Results. A probabilistic assessment of the state of the haulage drift under different protection methods, used to predict the stability of section development workings, was obtained from the experimental data of mine observations (observation time t = 4280 hours) of the performance of the arched pliable lining installed in the working along the length of the excavation section. After the sample was formed, the calculation of a statistical assessment of the reliability of the support operation was performed: the indicators of the failure rate λ and the recovery rate μ were established. Dependencies are obtained that allow assessing the state of development workings along the length of the excavation section and in the zone of influence of the stopping operations. It is proved that in the steady mode of operation of the haulage drift, with an increase in the failure rate of the arch support by 5 times, the availability factor, as a function of the reliability and maintainability of the support, changes from 0.9 to 0.5, which leads to a deterioration in time, approximately by 60 %, operational characteristics of the support in the supported development. Novelty. The probabilistic assessment of the loss of stability of the haulage drift along the length of the excavation section is based on the structuring of the data on the performance of arched supports and depends on the method of protection of the working, the intensity of failures of the arched supple support and the frequency of its damage, when in the desired interval of observations when forming the sample, the position of the stopping front is taken into account. Practical relevance. For the reuse of development workings with a store method of preparing steep seams and a descending order of mining floors, a conceptual model is proposed that allows predicting the state of haulage drifts along the length of the excavation area, taking into account the method of protection.
- Open Access
- 31 March 2021
- Published by National Scientific and Research Institute of Industrial Safety and Occupational Safety and Health in Labour protection problems in Ukraine
- Vol. 37 (1) , 16-27
ANALYSIS OF MAINGATES STABILITY IN STEP COAL SEAMS DURING PROTECTION BY COAL PILLARS
The purpose of the work. Studying the stability of haulage drifts of steep coal seams with the method of protecting coal by pillars. An integrated approach was used as research methods, including: a full-scale experiment, analytical studies, interpretation of the results obtained. To assess the durability of mine workings, full-scale experiments were carried out to study the manifestations of rock pressure in the haulage drifts with the method of protecting coal by pillars, when the magnitude of the change in the cross-sectional area and the convergence of side rocks on the contour of the development workings along the length of the excavation section was established. It is fixed that at the maximum relative deformation of coal pillars (ε ≈ 0,7), the loss of the cross-sectional area of the haulage drifts at a distance of l ≥ 60 m behind the working face is more than 50 %, which does not correspond to the operational state of the workings. When studying the deformation properties of protective structures, it was found that after their deformation by 10–20 %, an increase in the convergence of side rocks in the haulage drifts begins, a distortion of the shape and loss of the bearing capacity of coal pillars. The distortion of the shape of the security structures contributes to the intensification of the displacements of the roof on the contour and is accompanied by a deterioration in the durability of the haulage drifts in the excavation areas of the coal mine. It has been proved that on a steep drop, with the method of protecting the haulage drifts with coal pillars, the change in the cross-sectional area of the excavation occurs along a linear relationship with an increase in the length of the excavation section due to the distortion of the shape and loss of the bearing capacity of the security structures. To improve the safety of miners in the excavation areas of coal mines developed steeply falling coal seams, it is recommended to abandon the method of protecting the haulage drifts with coal pillars. To avoid emergencies associated with the collapse of the roof, it seems advisable to use purposeless methods of protection – flexible structures or backfilling of the goaf.
- 31 March 2021
- Published by National Scientific and Research Institute of Industrial Safety and Occupational Safety and Health in Labour protection problems in Ukraine
- Vol. 37 (1) , 16-27
Open AccessANALYSIS OF MAINGATES STABILITY IN STEP COAL SEAMS DURING PROTECTION BY COAL PILLARS
The purpose of the work. Studying the stability of haulage drifts of steep coal seams with the method of protecting coal by pillars. An integrated approach was used as research methods, including: a full-scale experiment, analytical studies, interpretation of the results obtained. To assess the durability of mine workings, full-scale experiments were carried out to study the manifestations of rock pressure in the haulage drifts with the method of protecting coal by pillars, when the magnitude of the change in the cross-sectional area and the convergence of side rocks on the contour of the development workings along the length of the excavation section was established. It is fixed that at the maximum relative deformation of coal pillars (ε ≈ 0,7), the loss of the cross-sectional area of the haulage drifts at a distance of l ≥ 60 m behind the working face is more than 50 %, which does not correspond to the operational state of the workings. When studying the deformation properties of protective structures, it was found that after their deformation by 10–20 %, an increase in the convergence of side rocks in the haulage drifts begins, a distortion of the shape and loss of the bearing capacity of coal pillars. The distortion of the shape of the security structures contributes to the intensification of the displacements of the roof on the contour and is accompanied by a deterioration in the durability of the haulage drifts in the excavation areas of the coal mine. It has been proved that on a steep drop, with the method of protecting the haulage drifts with coal pillars, the change in the cross-sectional area of the excavation occurs along a linear relationship with an increase in the length of the excavation section due to the distortion of the shape and loss of the bearing capacity of the security structures. To improve the safety of miners in the excavation areas of coal mines developed steeply falling coal seams, it is recommended to abandon the method of protecting the haulage drifts with coal pillars. To avoid emergencies associated with the collapse of the roof, it seems advisable to use purposeless methods of protection – flexible structures or backfilling of the goaf.
- 1 January 2021
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 2
ANALYSIS OF PRODUCTION RISK FROM CRUSHES OF ROCKS AT EXCAVATION SITES, TAKING INTO ACCOUNT WAYS OF PROTECTION
Purpose. To assess the production risk of rock collapse in a deep coal mine to identify hazards in the workplaces of the excavation site, taking into account different methods of protection of workings. Methods. A comprehensive approach was used, which included: analysis and generalization of known research; expert evaluation; use of the basic provisions of probability theory and set algebra (Venn diagrams), the method of estimating the production risk of Fine-Kinney; processing, analysis and interpretation of the obtained results. Results. Problems and sources of industrial risk from rock collapses during maintenance of workings, risk-forming factors that contribute to the threat of dangerous events at the excavation site are analyzed. The decision-making model is considered, which is based on the description of situations when the production risk of the dangerous factor “landslides and collapses” in the maintenance of preparatory workings depends on the result of choosing an alternative method of protection of the retractable lane. For excavation sites under the same mining and geological conditions for all workplaces, the probability of receiving consequences from dangerous events due to uncertain conditions of their implementation has been established. It is fixed that the realization of this production risk is influenced by low reliability and inefficiency of the practiced methods of protection of excavations. Risk analysis is defined as the systematic use of available information to identify hazards in the maintenance of long workings. Novelty. A model for monitoring the production risk of rock collapses in excavations of deep coal mines is proposed, which allows assessing the dynamics of the threat at the stage of technical decisions related to the choice and justification of the method of protection of workings taking into account the interaction of risk factors. Practical significance. When formulating measures to reduce the risk of dangerous events at the excavation site, it is necessary to take into account that the production risk of rock collapse while maintaining the workings depends largely on the method of protection and effectiveness of technological measures.
- 1 January 2021
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 2
ANALYSIS OF PRODUCTION RISK FROM CRUSHES OF ROCKS AT EXCAVATION SITES, TAKING INTO ACCOUNT WAYS OF PROTECTION
Purpose. To assess the production risk of rock collapse in a deep coal mine to identify hazards in the workplaces of the excavation site, taking into account different methods of protection of workings. Methods. A comprehensive approach was used, which included: analysis and generalization of known research; expert evaluation; use of the basic provisions of probability theory and set algebra (Venn diagrams), the method of estimating the production risk of Fine-Kinney; processing, analysis and interpretation of the obtained results. Results. Problems and sources of industrial risk from rock collapses during maintenance of workings, risk-forming factors that contribute to the threat of dangerous events at the excavation site are analyzed. The decision-making model is considered, which is based on the description of situations when the production risk of the dangerous factor “landslides and collapses” in the maintenance of preparatory workings depends on the result of choosing an alternative method of protection of the retractable lane. For excavation sites under the same mining and geological conditions for all workplaces, the probability of receiving consequences from dangerous events due to uncertain conditions of their implementation has been established. It is fixed that the realization of this production risk is influenced by low reliability and inefficiency of the practiced methods of protection of excavations. Risk analysis is defined as the systematic use of available information to identify hazards in the maintenance of long workings. Novelty. A model for monitoring the production risk of rock collapses in excavations of deep coal mines is proposed, which allows assessing the dynamics of the threat at the stage of technical decisions related to the choice and justification of the method of protection of workings taking into account the interaction of risk factors. Practical significance. When formulating measures to reduce the risk of dangerous events at the excavation site, it is necessary to take into account that the production risk of rock collapse while maintaining the workings depends largely on the method of protection and effectiveness of technological measures.
- Open Access
- 19 June 2020
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (7 (105)) , 87-96
Substantiation of the stability of haulage drifts with protective structures of different rigidity
Substantiation of the stability of haulage drifts with protective structures of different rigidity
- 19 June 2020
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (7 (105)) , 87-96
Open AccessSubstantiation of the stability of haulage drifts with protective structures of different rigidity
Substantiation of the stability of haulage drifts with protective structures of different rigidity
- 1 January 2020
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 2,p. 89-100
INVESTIGATION OF MAINGATES STABILITY IN STEEP COAL SEAMS AT EXTRACTION LAYOUTS OF DEEP MINE
Purpose of work. Investigation of maingates stability in different methods of protection on the extraction layouts of a deep coal mine, which develops steeply inclined coal seams. Methods. To achieve this goal, mine experimental observation of maingates stability performed. Conditions for their maintenance are evaluated by the magnitude of the convergence of the side rocks on the contour and changes in the cross-sectional area of the gateroads. Results. As a result of the research the conditions of maingates stability in steep coal seams in protection by pillars or timber sets are substantiated. It is recorded that in the zone of influence of extraction operations, at a distance of l <60 m behind the mining face with the considered methods of protection, the support of the maingates is deformed within the yielding limits and has characteristic flexures the side of hanging wall. At a distance of l≥60 m, the cross-sectional area of the maingates is reduced to 50% of the initial values, and the amount of roof to floor convergence exceeds the flexibility of the support. The increase displacement of rock mass on the contour of the supported roadway behind the mining face depends on the strength and geometry of the secondary support structures above the maingate. Novelty. It is experimentally established that the change in the cross-sectional area of the maingate during protection by timber sets occurs linearly with increasing length of the extraction layout. Practical significance. To ensure the maingates stability, it is advisable to use non-pillar methods of protection, when using yielding secondary support systemsabove the roadway, or backfilling.
- 1 January 2020
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 2,p. 89-100
INVESTIGATION OF MAINGATES STABILITY IN STEEP COAL SEAMS AT EXTRACTION LAYOUTS OF DEEP MINE
Purpose of work. Investigation of maingates stability in different methods of protection on the extraction layouts of a deep coal mine, which develops steeply inclined coal seams. Methods. To achieve this goal, mine experimental observation of maingates stability performed. Conditions for their maintenance are evaluated by the magnitude of the convergence of the side rocks on the contour and changes in the cross-sectional area of the gateroads. Results. As a result of the research the conditions of maingates stability in steep coal seams in protection by pillars or timber sets are substantiated. It is recorded that in the zone of influence of extraction operations, at a distance of l <60 m behind the mining face with the considered methods of protection, the support of the maingates is deformed within the yielding limits and has characteristic flexures the side of hanging wall. At a distance of l≥60 m, the cross-sectional area of the maingates is reduced to 50% of the initial values, and the amount of roof to floor convergence exceeds the flexibility of the support. The increase displacement of rock mass on the contour of the supported roadway behind the mining face depends on the strength and geometry of the secondary support structures above the maingate. Novelty. It is experimentally established that the change in the cross-sectional area of the maingate during protection by timber sets occurs linearly with increasing length of the extraction layout. Practical significance. To ensure the maingates stability, it is advisable to use non-pillar methods of protection, when using yielding secondary support systemsabove the roadway, or backfilling.
- 1 January 2020
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 2
ASSESSMENT OF STABILITY OF MINING DEPARTMENTS UNDER IMPACT LOADS
Purpose of work. The purpose of the research is to determine the conditions for ensuring the stability of mine workings in the coal massif under the action of shock loads. Methods. To achieve this goal, analytical studies were performed using the basic provisions of classical mechanics and the theory of elasticity. In laboratory studies, experimental samples of crushed rock were used, which were placed in a steel cylinder. Results. In the course of experimental research, the influence of the impact force and the impact pulse of the falling load on the response of the plane on a pliable basis with inhomogeneous, piece-sized, fragmented rock was studied. It is recorded that at a constant amount of energy of a single impact (mgH = 14.7 J), when the height of the fall of the load decreases 3 times (from H = 1.5 m to H = 0.5 m), and the mass increases from m = 1.0 kg to m = 3.0 kg, the magnitude of the impact force is reduced by 50%. With an increase in the amount of energy of a single impact (from mgH = 4.9 J to mgH = 44.1 J) at the same height of fall, when the mass of the load increases threefold, there is an increase of 2.5 times the impact force. At a constant amount of energy of a single impact (mgH = const), the displacement of the plane on a pliable base of crushed rock depends on the magnitude of the impact pulse of the falling load. Novelty. It is proved that when there is collapse of lateral rocks in the coal massif containing the production, the force of impact on the surface is proportional to the time of fall of the rock blocks to the time of their impact interaction with the plane. Practical significance. In deep coal mines, as a result of mining and the probability of shock loads from landslides, to ensure the stability of mine workings in excavation sites, it is advisable to use pliable supports or filling the produced space with crushed rock, which will ensure the integrity of lateral rocks.
- 1 January 2020
- Published by Donetsk National Technical University in JOURNAL of Donetsk mining institute
- No. 2
ASSESSMENT OF STABILITY OF MINING DEPARTMENTS UNDER IMPACT LOADS
Purpose of work. The purpose of the research is to determine the conditions for ensuring the stability of mine workings in the coal massif under the action of shock loads. Methods. To achieve this goal, analytical studies were performed using the basic provisions of classical mechanics and the theory of elasticity. In laboratory studies, experimental samples of crushed rock were used, which were placed in a steel cylinder. Results. In the course of experimental research, the influence of the impact force and the impact pulse of the falling load on the response of the plane on a pliable basis with inhomogeneous, piece-sized, fragmented rock was studied. It is recorded that at a constant amount of energy of a single impact (mgH = 14.7 J), when the height of the fall of the load decreases 3 times (from H = 1.5 m to H = 0.5 m), and the mass increases from m = 1.0 kg to m = 3.0 kg, the magnitude of the impact force is reduced by 50%. With an increase in the amount of energy of a single impact (from mgH = 4.9 J to mgH = 44.1 J) at the same height of fall, when the mass of the load increases threefold, there is an increase of 2.5 times the impact force. At a constant amount of energy of a single impact (mgH = const), the displacement of the plane on a pliable base of crushed rock depends on the magnitude of the impact pulse of the falling load. Novelty. It is proved that when there is collapse of lateral rocks in the coal massif containing the production, the force of impact on the surface is proportional to the time of fall of the rock blocks to the time of their impact interaction with the plane. Practical significance. In deep coal mines, as a result of mining and the probability of shock loads from landslides, to ensure the stability of mine workings in excavation sites, it is advisable to use pliable supports or filling the produced space with crushed rock, which will ensure the integrity of lateral rocks.
- 1 January 2020
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 14 (3) , 119-127
Experimental characteristics for deformation properties of backfill mass
- 1 January 2020
- Published by Dnipro University of Technology in Mining of Mineral Deposits
- Vol. 14 (3) , 119-127
Experimental characteristics for deformation properties of backfill mass