Jose Angel Castellanos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jose Angel Castellanos has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Julio A. Placed
Instituto de Investigacin en Ingeniera de Aragn (I3A), Universidad de Zaragoza, Zaragoza, Spain
4 shared publications - Jesus Alfonso
Grupo de Investigación Aplicada (GIA-MDPI), Instituto Tecnológico de Aragón, Zaragoza, Spain
2 shared publications - Juan Domingo Tardos
Universidad de Zaragoza
2 shared publications - Ruben Martinez-Cantin
University of Zaragoza
2 shared publications - Valentin Ivanov
Smart Vehicle Systems Group, Control Engineering Group, Technische Universität Ilmenau, Robert-Bosch-Ring 1, 98693 Ilmenau, Germany
2 shared publications - Viktar Beliautsou
Technische Universitt Ilmenau, Ilmenau, Germany
2 shared publications
Latest Publications
- Open Access
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 1661-1672
Geographically Distributed Test Environment: Validation of Integrated Motion Control of Multi-Actuated Electric Vehicle
As an example of a geographically distributed test environment, an integrated motion control system for multi-actuated electric vehicles has been proposed and evaluated. This system unifies three active subsystems: drive-by-wire propulsion with independent in-wheel electric motors, electro-hydraulic brake actuators, and active suspension actuators. A distributed X-in-the-loop network architecture supports the approach, integrating a real-time validated vehicle model, dedicated test benches for each subsystem, and a driving simulator located in different geographical locations. This setup enables real-time testing and validation of the integrated control strategy. Validation results show improved ride comfort and safety.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- Vol. 6, 1661-1672
Open AccessGeographically Distributed Test Environment: Validation of Integrated Motion Control of Multi-Actuated Electric Vehicle
As an example of a geographically distributed test environment, an integrated motion control system for multi-actuated electric vehicles has been proposed and evaluated. This system unifies three active subsystems: drive-by-wire propulsion with independent in-wheel electric motors, electro-hydraulic brake actuators, and active suspension actuators. A distributed X-in-the-loop network architecture supports the approach, integrating a real-time validated vehicle model, dedicated test benches for each subsystem, and a driving simulator located in different geographical locations. This setup enables real-time testing and validation of the integrated control strategy. Validation results show improved ride comfort and safety.
- Top Cited Papers
- 16 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (3) , 1686-1705
A Survey on Active Simultaneous Localization and Mapping: State of the Art and New Frontiers
Active simultaneous localization and mapping (SLAM) is the problem of planning and controlling the motion of a robot to build the most accurate and complete model of the surrounding environment. Since the first foundational work in active perception appeared, more than three decades ago, this field has received increasing attention across different scientific communities. This has brought about many different approaches and formulations, and makes a review of the current trends necessary and extremely valuable for both new and experienced researchers. In this article, we survey the state of the art in active SLAM and take an in-depth look at the open challenges that still require attention to meet the needs of modern applications. After providing a historical perspective, we present a unified problem formulation and review the well-established modular solution scheme, which decouples the problem into three stages that identify, select, and execute potential navigation actions. We then analyze alternative approaches, including belief-space planning and deep reinforcement learning techniques, and review related work on multirobot coordination. This article concludes with a discussion of new research directions, addressing reproducible research, active spatial perception, and practical applications, among other topics.
- 16 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 39 (3) , 1686-1705
Top Cited PapersA Survey on Active Simultaneous Localization and Mapping: State of the Art and New Frontiers
Active simultaneous localization and mapping (SLAM) is the problem of planning and controlling the motion of a robot to build the most accurate and complete model of the surrounding environment. Since the first foundational work in active perception appeared, more than three decades ago, this field has received increasing attention across different scientific communities. This has brought about many different approaches and formulations, and makes a review of the current trends necessary and extremely valuable for both new and experienced researchers. In this article, we survey the state of the art in active SLAM and take an in-depth look at the open challenges that still require attention to meet the needs of modern applications. After providing a historical perspective, we present a unified problem formulation and review the well-established modular solution scheme, which decouples the problem into three stages that identify, select, and execute potential navigation actions. We then analyze alternative approaches, including belief-space planning and deep reinforcement learning techniques, and review related work on multirobot coordination. This article concludes with a discussion of new research directions, addressing reproducible research, active spatial perception, and practical applications, among other topics.
- 30 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (2) , 816-823
A General Relationship Between Optimality Criteria and Connectivity Indices for Active Graph-SLAM
Quantifying uncertainty is a key stage in active simultaneous localization and mapping (SLAM), as it allows to identify the most informative actions to execute. However, dealing with full covariance or even Fisher information matrices (FIMs) is computationally heavy and easily becomes intractable for online systems. In this letter, we study the paradigm of active graph-SLAM formulated over the special Euclidean group SE(n) , and propose a general relationship between the FIM of the system and the Laplacian matrix of the underlying pose-graph. This link makes possible to use graph connectivity indices as utility functions with optimality guarantees, since they approximate the well-known optimality criteria that stem from optimal design theory. Experimental validation demonstrates that the proposed method leads to equivalent decisions for active SLAM in a fraction of the time.
- 30 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (2) , 816-823
A General Relationship Between Optimality Criteria and Connectivity Indices for Active Graph-SLAM
Quantifying uncertainty is a key stage in active simultaneous localization and mapping (SLAM), as it allows to identify the most informative actions to execute. However, dealing with full covariance or even Fisher information matrices (FIMs) is computationally heavy and easily becomes intractable for online systems. In this letter, we study the paradigm of active graph-SLAM formulated over the special Euclidean group SE(n) , and propose a general relationship between the FIM of the system and the Laplacian matrix of the underlying pose-graph. This link makes possible to use graph connectivity indices as utility functions with optimality guarantees, since they approximate the well-known optimality criteria that stem from optimal design theory. Experimental validation demonstrates that the proposed method leads to equivalent decisions for active SLAM in a fraction of the time.
- 19 November 2022
- Published by Springer Nature
- p. 199-210
ExplORB-SLAM: Active Visual SLAM Exploiting the Pose-graph Topology
- 19 November 2022
- Published by Springer Nature
- p. 199-210
ExplORB-SLAM: Active Visual SLAM Exploiting the Pose-graph Topology
- 17 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 1002-1007
Geographically distributed real-time co-simulation of electric vehicle
The present paper shows the capabilities of a distributed real-time co-simulation environment merging simulation models and testing facilities for developing and verifying electric vehicles. This environment has been developed in the framework of the XILforEV project and the presented case is focused on a ride control with a real suspension installed on a test bench in Spain, which uses real-time information from a complete vehicle model in Germany. Given the long distance between both sites, it has been necessary to develop a specific delay compensation algorithm. This algorithm is general enough to be used in other real-time co-simulation frameworks. In the present work, the system architecture including the communication compensation is described and successfully experimentally validated.
- 17 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 1002-1007
Geographically distributed real-time co-simulation of electric vehicle
The present paper shows the capabilities of a distributed real-time co-simulation environment merging simulation models and testing facilities for developing and verifying electric vehicles. This environment has been developed in the framework of the XILforEV project and the presented case is focused on a ride control with a real suspension installed on a test bench in Spain, which uses real-time information from a complete vehicle model in Germany. Given the long distance between both sites, it has been necessary to develop a specific delay compensation algorithm. This algorithm is general enough to be used in other real-time co-simulation frameworks. In the present work, the system architecture including the communication compensation is described and successfully experimentally validated.
- Open Access
- 25 November 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (23) , 8386
A Deep Reinforcement Learning Approach for Active SLAM
In this paper, we formulate the active SLAM paradigm in terms of model-free Deep Reinforcement Learning, embedding the traditional utility functions based on the Theory of Optimal Experimental Design in rewards, and therefore relaxing the intensive computations of classical approaches. We validate such formulation in a complex simulation environment, using a state-of-the-art deep Q-learning architecture with laser measurements as network inputs. Trained agents become capable not only to learn a policy to navigate and explore in the absence of an environment model but also to transfer their knowledge to previously unseen maps, which is a key requirement in robotic exploration.
- 25 November 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (23) , 8386
Open AccessA Deep Reinforcement Learning Approach for Active SLAM
In this paper, we formulate the active SLAM paradigm in terms of model-free Deep Reinforcement Learning, embedding the traditional utility functions based on the Theory of Optimal Experimental Design in rewards, and therefore relaxing the intensive computations of classical approaches. We validate such formulation in a complex simulation environment, using a state-of-the-art deep Q-learning architecture with laser measurements as network inputs. Trained agents become capable not only to learn a policy to navigate and explore in the absence of an environment model but also to transfer their knowledge to previously unseen maps, which is a key requirement in robotic exploration.
- 10 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 34 (3) , 829-834
On the Importance of Uncertainty Representation in Active SLAM
The purpose of this work is to highlight the paramount importance of representing and quantifying uncertainty to correctly report the associated confidence of the robot’s location estimate at each time step along its trajectory and therefore decide the correct course of action in an active SLAM mission. We analyze the monotonicity property of different decision-making criteria, both in 2-D and 3-D, with respect to the representation of uncertainty and of the orientation of the robot’s pose. Monotonicity, the property that uncertainty increases as the robot moves, is essential for adequate decision making. We analytically show that, by using differential representations to propagate spatial uncertainties, monotonicity is preserved for all optimality criteria, A-opt, D-opt, and E-opt, and for Shannon’s entropy. We also show that monotonicity does not hold for any criteria in absolute representations using Roll-Pitch-Yaw and Euler angles. Finally, using unit quaternions in absolute representations, the only criteria that preserve monotonicity are D-opt and Shannon’s entropy.
- 10 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 34 (3) , 829-834
On the Importance of Uncertainty Representation in Active SLAM
The purpose of this work is to highlight the paramount importance of representing and quantifying uncertainty to correctly report the associated confidence of the robot’s location estimate at each time step along its trajectory and therefore decide the correct course of action in an active SLAM mission. We analyze the monotonicity property of different decision-making criteria, both in 2-D and 3-D, with respect to the representation of uncertainty and of the orientation of the robot’s pose. Monotonicity, the property that uncertainty increases as the robot moves, is essential for adequate decision making. We analytically show that, by using differential representations to propagate spatial uncertainties, monotonicity is preserved for all optimality criteria, A-opt, D-opt, and E-opt, and for Shannon’s entropy. We also show that monotonicity does not hold for any criteria in absolute representations using Roll-Pitch-Yaw and Euler angles. Finally, using unit quaternions in absolute representations, the only criteria that preserve monotonicity are D-opt and Shannon’s entropy.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 2415-2420
Analysis of Particle Methods for Simultaneous Robot Localization and Mapping and a New Algorithm: Marginal-SLAM
This paper presents a new particle method, with stochastic parameter estimation, to solve the SLAM problem. The underlying algorithm is rooted on a solid probabilistic foundation and is guaranteed to converge asymptotically, unlike many existing popular approaches. Moreover, it is efficient in storage and computation. The new algorithm carries out filtering only in the marginal filtering space, thereby allowing for the recursive computation of low variance estimates of the map. The paper provides mathematical arguments and empirical evidence to substantiate the fact that the new method represents an improvement over the existing particle filtering approaches for SLAM, which work on the joint path state space.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 2415-2420
Analysis of Particle Methods for Simultaneous Robot Localization and Mapping and a New Algorithm: Marginal-SLAM
This paper presents a new particle method, with stochastic parameter estimation, to solve the SLAM problem. The underlying algorithm is rooted on a solid probabilistic foundation and is guaranteed to converge asymptotically, unlike many existing popular approaches. Moreover, it is efficient in storage and computation. The new algorithm carries out filtering only in the marginal filtering space, thereby allowing for the recursive computation of low variance estimates of the map. The paper provides mathematical arguments and empirical evidence to substantiate the fact that the new method represents an improvement over the existing particle filtering approaches for SLAM, which work on the joint path state space.
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 796-801
Adaptive Scale Robust Segmentation for 2D Laser Scanner
This paper presents a robust algorithm for segmentation and line detection in 2D range scans. The described method exploits the multimodal probability density function of the residual error. It is capable of segmenting the range data in clusters, estimate the straight segments parameters, and estimate the scale of inliers error noise successfully, despite of high level of spurious data. No prior knowledge about the sensor and object properties is given to the algorithm. The mode seeking is based on mean shift algorithm, which has been widely used and tested in 3D laser scan segmentation, machine learning and pattern recognition applications. We show the reliability of the technique with experimental indoor and outdoor manmade environment. Compared with classical methods, a good compromise between false positive, false negative, wrong segment split and wrong segment merge is achieved, with improved accuracy in the estimated parameters
- 1 October 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21530858,p. 796-801
Adaptive Scale Robust Segmentation for 2D Laser Scanner
This paper presents a robust algorithm for segmentation and line detection in 2D range scans. The described method exploits the multimodal probability density function of the residual error. It is capable of segmenting the range data in clusters, estimate the straight segments parameters, and estimate the scale of inliers error noise successfully, despite of high level of spurious data. No prior knowledge about the sensor and object properties is given to the algorithm. The mode seeking is based on mean shift algorithm, which has been widely used and tested in 3D laser scan segmentation, machine learning and pattern recognition applications. We show the reliability of the technique with experimental indoor and outdoor manmade environment. Compared with classical methods, a good compromise between false positive, false negative, wrong segment split and wrong segment merge is achieved, with improved accuracy in the estimated parameters