MKMuhammad Zubair Khan

Muhammad Zubair Khan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Muhammad Zubair Khan has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optimization of Controlling Factors for TC4 Alloy With Al2O3–Graphene Hybrid Nanofluid

    by Asif Israr, Muhammad Zubair Khan, Ruqia Ikram, Yumna Qureshi, Kashif Riaz Wattoo

    Nowadays, mixing nanoparticles into cutting fluids is much more common to improve lubrication and cooling properties. Many studies have been carried out in the past to assess the machining performance using nanofluids. However, limited studies are based on hybrid nanoparticles. This work estimates TC4 alloy machining performance using a hybrid nanofluid. The Minimum Quantity Lubrication (MQL) cooling technique is employed here to investigate machinability. The machining performance of TC4 alloy is estimated by taking surface roughness and cutting temperature as response parameters. Hybrid nanofluid is formed by adding nanoparticles of graphene into alumina (Al2O3) based nanofluid in a fixed volumetric proportion (20:80) and as base fluid, soybean oil is used. In addition, machining performance is investigated in terms of thermophysical properties by taking wt% of concentrations of nanoparticles as 0.25, 0.50, 0.75, and 1.00 respectively. Significant improvements are observed in thermophysical properties with the hybridization of Al2O3 and graphene (Al2O3-GnP). Experimentation and parametric optimization are carried out using Taguchi's method. Controlling factors of hybrid nanofluid of alumina graphene and monotype nanofluid of alumina are compared. The obtained results show that these parameters significantly reduce using hybrid nanofluid.


  • Open Access

    Sensitivity Analysis of Reinforced Aluminum Based Metal Matrix Composites

    by Fouzia Gillani, Muhammad Zubair Khan, Owaisur Rahman Shah

    Metal matrix composites (MMCs) have wide applications due to being lightweight, their high strength, and immense resistance to wear. To explore new generation materials like aluminum-based metal matrix composites (AMCs) for wide engineering applications, the present work aimed at investigating the effect of changes in composition, sintering time, and temperature on the hardness and surface roughness of AMCs containing SiC and ZrSiO4 in wt % of 5, 20, 30, and 40 binary and hybrid sample pallets. The samples have been prepared by powder metallurgy (PM) method under 1000 psi pressure. After compaction, the above pallets sintered at different temperatures ranging from 500 °C to 1100 °C with an increment of 200 °C and 15 min intervals for four levels of temperature and time, respectively. Afterwards, sensitivity analysis has been done by investigating the effect of chemical composition, sintering time, and sintering temperature of the binary and hybrid composites on hardness and surface roughness. Morphological studies on the composites were carried out using field emission scanning electron microscope (FESEM) with energy dispersive spectroscopy (EDS). It has been observed that hardness is increased by increasing the sintering temperature in the case of SiC, whereas surface roughness did not change much by changing the composition. Additionally, a rise in temperature lead to liquid-state sintering. SEM images obtained during the elemental analysis showed that porosity is generated within the samples after sintering due to the higher melting point of reinforcements compared to a base metal, i.e., aluminum. Mathematical equations have also been developed via regression analysis using Minitab and excel for the confirmation and validation of experimental data. Analysis of Variance (ANOVA) has also been done, and its tables are shown and discussed in the paper. Hence, the most optimized findings relating the changes in the composition of reinforcements, sintering temperature, and sintering time (input variables) with porosity, hardness, and surface roughness have been presented in the current study.


  • Open Access

    Shear Strain Model for Equal Channel Angular Pressing in High Elastic Extruded Plastics

    by N. A. Anjum, M. Z. Khan, M. Shah, M. S. Khalil, R. A. Pasha, F. Qayyum, W. Anwar

    This paper presents a novel model for plastic shear strain calculation in the Equal Channel Angular Pressing (ECAP). The model is particularly formulated to furnish for the elastic recovery after extrusion. Due to high elastic recovery after plastic deformation in polymers, the behavior of Teflon and Nylon is investigated at different temperatures as they are famous for their low coefficient of friction and wall friction effects. The main concentration is given to the basic principle of ECAP processing parameters such as strain, slip bands, and shearing patterns. In this research, a new engraved circle marking technique is used to trace the plastic deformation in the specimens. Afterwards, image analysis approach is applied to measure the deformation, strain and rotation after extrusion. The experimental results are validated with the ABAQUS based numerical simulation. A close conformity is found between them.