Isaac Spotts
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Isaac Spotts has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- C. Harrison Brodie
School of Engineering, The University of British Columbia, Kelowna, BC, Canada
3 shared publications Camille A. Leclerc
2 shared publicationsChristopher M. Collier
2 shared publications- Christopher M. Collier
Collier Research Group, School of Engineering, The University of British Columbia, Kelowna, BC, Canada
2 shared publications Jonathan F. Holzman
2 shared publicationsMichael E. Mitchell
2 shared publications
Latest Publications
- 10 February 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 64 (6) , 1388-1392
Key considerations for effective optical excitation of low-temperature-grown gallium arsenide terahertz emitters
This work shows the characterization and optimization of the optical excitation conditions for low-temperature-grown gallium arsenide (LT-GaAs) terahertz (THz) emitters, given attention to the numerical aperture (NA) of the microscope objective and its defocusing distance. Our pump-probe transmission and THz emission analyses show that low-NA (0.35) and high-NA (0.65) microscope objectives photoexcite charge carriers within the LT-GaAs epilayer and semi-insulating GaAs (SI-GaAs) substrate. However, only the high-NA (0.65) microscope objective can localize the charge carriers in the LT-GaAs epilayer. The defocusing distance for this objective can then be varied to fully optimize the THz bandwidth and dynamic range.
- 10 February 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 64 (6) , 1388-1392
Key considerations for effective optical excitation of low-temperature-grown gallium arsenide terahertz emitters
This work shows the characterization and optimization of the optical excitation conditions for low-temperature-grown gallium arsenide (LT-GaAs) terahertz (THz) emitters, given attention to the numerical aperture (NA) of the microscope objective and its defocusing distance. Our pump-probe transmission and THz emission analyses show that low-NA (0.35) and high-NA (0.65) microscope objectives photoexcite charge carriers within the LT-GaAs epilayer and semi-insulating GaAs (SI-GaAs) substrate. However, only the high-NA (0.65) microscope objective can localize the charge carriers in the LT-GaAs epilayer. The defocusing distance for this objective can then be varied to fully optimize the THz bandwidth and dynamic range.
- Open Access
- 26 April 2024
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (7) , 075208
Integration of liquid crystal optical delay and mechanical stage optical delay for measurement of ultrafast autocorrelations and terahertz pulses
To improve the temporal resolution in an optical delay system that uses a conventional mechanical delay stage, we integrate an in-line liquid crystal (LC) wave retarder. Previous implementations of LC optical delay methods are limited due to the small temporal window provided. Using a conventional mechanical delay stage system in series with the LC wave retarder, the temporal window is lengthened. Additionally, the limitation on temporal resolution resulting from the minimum optical path alteration (resolution of 400 nm) of the conventionally used mechanical delay stage is reduced via the in-line wave retarder (resolution of 50 nm). Interferometric autocorrelation measurements are conducted at multiple laser emission frequencies (349, 357, 375, 394, and 405 THz) using the in-line LC and conventional mechanical delay stage systems. The in-line LC system is compared to the conventional mechanical delay stage system to determine the improvements in temporal resolution relating to maximum resolvable frequency. This work demonstrates that the integration of the in-line LC system can extend the maximum resolvable frequency from 375 to 3000 THz. The in-line LC system is also applied for measurement of terahertz pulses.
- 26 April 2024
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 35 (7) , 075208
Open AccessIntegration of liquid crystal optical delay and mechanical stage optical delay for measurement of ultrafast autocorrelations and terahertz pulses
To improve the temporal resolution in an optical delay system that uses a conventional mechanical delay stage, we integrate an in-line liquid crystal (LC) wave retarder. Previous implementations of LC optical delay methods are limited due to the small temporal window provided. Using a conventional mechanical delay stage system in series with the LC wave retarder, the temporal window is lengthened. Additionally, the limitation on temporal resolution resulting from the minimum optical path alteration (resolution of 400 nm) of the conventionally used mechanical delay stage is reduced via the in-line wave retarder (resolution of 50 nm). Interferometric autocorrelation measurements are conducted at multiple laser emission frequencies (349, 357, 375, 394, and 405 THz) using the in-line LC and conventional mechanical delay stage systems. The in-line LC system is compared to the conventional mechanical delay stage system to determine the improvements in temporal resolution relating to maximum resolvable frequency. This work demonstrates that the integration of the in-line LC system can extend the maximum resolvable frequency from 375 to 3000 THz. The in-line LC system is also applied for measurement of terahertz pulses.
- 2 June 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (17) , 4465-4473
THz Bragg structures fabricated with additive manufacturing
The advancement of THz science and technology is desirable to facilitate the application of THz technologies in many sectors. Specialized THz photonic elements for these applications require desirable absorption and refractive characteristics in the THz regime. THz photonic elements can be created with additive manufacturing, and specifically 3D printing, forgoing the need for complex fabrication procedures and methodologies. Such THz photonic elements include periodic Bragg structures, which are capable of filtering specific THz frequencies. The authors present a THz Bragg structure fabricated with 3D printing via fused filament fabrication. The THz Bragg structure is made from high-impact polystyrene filament material, which is characterized in this paper with THz time-domain spectroscopy. The geometry and theoretical operation of the THz Bragg structure is investigated with finite-difference time-domain electromagnetic simulations. The THz Bragg structure is evaluated using a THz experimental test bed. There is agreement between the theoretical and the experimental filtering placement within the frequency domain for the THz Bragg structure. The capability of tunable frequency filtering of the presented THz Bragg structure, fabricated with 3D printing, is established and facilitates future advancements in applications of THz science and technology.
- 2 June 2023
- Published by Optica Publishing Group in Applied Optics
- Vol. 62 (17) , 4465-4473
THz Bragg structures fabricated with additive manufacturing
The advancement of THz science and technology is desirable to facilitate the application of THz technologies in many sectors. Specialized THz photonic elements for these applications require desirable absorption and refractive characteristics in the THz regime. THz photonic elements can be created with additive manufacturing, and specifically 3D printing, forgoing the need for complex fabrication procedures and methodologies. Such THz photonic elements include periodic Bragg structures, which are capable of filtering specific THz frequencies. The authors present a THz Bragg structure fabricated with 3D printing via fused filament fabrication. The THz Bragg structure is made from high-impact polystyrene filament material, which is characterized in this paper with THz time-domain spectroscopy. The geometry and theoretical operation of the THz Bragg structure is investigated with finite-difference time-domain electromagnetic simulations. The THz Bragg structure is evaluated using a THz experimental test bed. There is agreement between the theoretical and the experimental filtering placement within the frequency domain for the THz Bragg structure. The capability of tunable frequency filtering of the presented THz Bragg structure, fabricated with 3D printing, is established and facilitates future advancements in applications of THz science and technology.
- 3 August 2022
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 12 (9) , 3379-3402
Comprehensive study of 3D printing materials over the terahertz regime: absorption coefficient and refractive index characterizations
Generation of terahertz (THz) radiation has become increasingly accessible over time. The research and development of THz applications is ongoing, often requiring the use of THz compatible optical components. At the same time, rapid prototyping three-dimensional (3D) printing systems are now commercially accessible and are capable of printing resolutions on the order of the THz wavelengths. Thus, 3D printing systems can be leveraged for use in creating novel THz optical components in varied experiments and applications. The filament material used in 3D printing systems dictates the absorptive and refractive properties of the 3D printed THz optical component. The commercial release of filament materials is continuous, year after year, inducing a need for literature to stay current with characterizing these filament materials over the THz gap. We use terahertz time-domain spectroscopy (THz-TDS) to characterize the absorptive and refractive properties of 3D printing materials over the THz gap. We present a consolidative and comprehensive aggregation of THz-TDS measurements of twenty-three 3D printing materials. A comparison of THz-TDS measurements for thick and thin samples provides verification of measurement accuracy. The measured THz bandwidth of these samples is extended by up to 1.2 THz. Furthermore, to the authors’ best knowledge, the proposed work puts forward the first THz-TDS measurements of polyvinyl butyral, polyetherimide, and low temperature polycaprolactone filament materials. This work primarily focuses on fused deposition modeling (FDM) 3D printed materials, rather than stereolithography (SLA) 3D printed materials.
- 3 August 2022
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 12 (9) , 3379-3402
Comprehensive study of 3D printing materials over the terahertz regime: absorption coefficient and refractive index characterizations
Generation of terahertz (THz) radiation has become increasingly accessible over time. The research and development of THz applications is ongoing, often requiring the use of THz compatible optical components. At the same time, rapid prototyping three-dimensional (3D) printing systems are now commercially accessible and are capable of printing resolutions on the order of the THz wavelengths. Thus, 3D printing systems can be leveraged for use in creating novel THz optical components in varied experiments and applications. The filament material used in 3D printing systems dictates the absorptive and refractive properties of the 3D printed THz optical component. The commercial release of filament materials is continuous, year after year, inducing a need for literature to stay current with characterizing these filament materials over the THz gap. We use terahertz time-domain spectroscopy (THz-TDS) to characterize the absorptive and refractive properties of 3D printing materials over the THz gap. We present a consolidative and comprehensive aggregation of THz-TDS measurements of twenty-three 3D printing materials. A comparison of THz-TDS measurements for thick and thin samples provides verification of measurement accuracy. The measured THz bandwidth of these samples is extended by up to 1.2 THz. Furthermore, to the authors’ best knowledge, the proposed work puts forward the first THz-TDS measurements of polyvinyl butyral, polyetherimide, and low temperature polycaprolactone filament materials. This work primarily focuses on fused deposition modeling (FDM) 3D printed materials, rather than stereolithography (SLA) 3D printed materials.
- 25 April 2022
- Published by Optica Publishing Group in Optics Continuum
- Vol. 1 (5) , 1003-1014
Extended Kalman filter and extended sliding innovation filter in terahertz spectral acquisition
Terahertz spectral acquisition has a fundamental limitation in implementation due to long experimental acquisition time. The long experimental acquisition time in terahertz spectral acquisition is a result of the required high integration time associated with usable dynamic range signals acquired through delay stage interferometry. This work evaluates the effectiveness of a non-linear version of the Kalman Filter, known as the extended Kalman filter (EKF), and the recently developed extended sliding innovation filter (ESIF), for increasing dynamic range in terahertz spectral acquisition. The comparison establishes that the EKF and ESIF can reduce integration time (time constant) of terahertz spectral acquisition, with EKF reducing the integration time by a factor of 23.7 for high noise signals and 1.66 for low noise signals to achieve similar dynamic ranges. The EKF developed in this work is comparable to a nominal application of wavelet denoising, conventionally used in terahertz spectral acquisitions. The implementation of this filter addresses a fundamental limitation of terahertz spectral acquisition by reducing acquisition time for usable dynamic range spectra. Incorporating this real-time post-processing technique in existing terahertz implementations to improve dynamic range will permit the application of terahertz spectral acquisition on a wide array of time sensitive systems, such as terahertz reflection imaging, and terahertz microfluidics. This is the first implementation, to our knowledge, of Kalman filtering methods on terahertz spectral acquisition.
- 25 April 2022
- Published by Optica Publishing Group in Optics Continuum
- Vol. 1 (5) , 1003-1014
Extended Kalman filter and extended sliding innovation filter in terahertz spectral acquisition
Terahertz spectral acquisition has a fundamental limitation in implementation due to long experimental acquisition time. The long experimental acquisition time in terahertz spectral acquisition is a result of the required high integration time associated with usable dynamic range signals acquired through delay stage interferometry. This work evaluates the effectiveness of a non-linear version of the Kalman Filter, known as the extended Kalman filter (EKF), and the recently developed extended sliding innovation filter (ESIF), for increasing dynamic range in terahertz spectral acquisition. The comparison establishes that the EKF and ESIF can reduce integration time (time constant) of terahertz spectral acquisition, with EKF reducing the integration time by a factor of 23.7 for high noise signals and 1.66 for low noise signals to achieve similar dynamic ranges. The EKF developed in this work is comparable to a nominal application of wavelet denoising, conventionally used in terahertz spectral acquisitions. The implementation of this filter addresses a fundamental limitation of terahertz spectral acquisition by reducing acquisition time for usable dynamic range spectra. Incorporating this real-time post-processing technique in existing terahertz implementations to improve dynamic range will permit the application of terahertz spectral acquisition on a wide array of time sensitive systems, such as terahertz reflection imaging, and terahertz microfluidics. This is the first implementation, to our knowledge, of Kalman filtering methods on terahertz spectral acquisition.